Search NASA⌕ Search

SEARCH · Search NASA

Results for “experimental data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Estimating Flow-Through Balance Momentum Tares with CFD

This paper describes the process used for estimating flow-through balance momentum tares. The interaction of jet engine exhausts on the BOEINGERA Hybrid Wing Body (HWB) was simulated in the NFAC 40x80 wind tunnel at NASA Ames using a pair of turbine powered simulators (TPS). High-pressure air was passed through a flow-through balance and manifold before being delivered to the TPS units. The force and moment tares that result from the internal shear and pressure distribution were estimated using CFD. Validation of the CFD simulations for these complex internal flows is a challenge, given limited experimental data due to the complications of the internal geometry. Two CFD validation efforts are documented, and comparisons with experimental data from the final model installation are provided.

Balance Momentum Tare↗

Phase Change Processes for Thermal Management Systems and Science Investigations

This white paper focuses on the scientific rationale and motivation for deploying phase change processes-based spacecraft thermal management systems for space missions [1,2]. Phase change processes need to be implemented in the design of various life support systems, sub-critical cryogenic and thermal control systems, taking advantage of the latent heat of phase change so as to significantly increase the heat transfer rate per unit fluid mass. Experimental data are critical to understanding gravitational effects on complex phase change processes using novel materials and working fluids. Experimental data can be acquired by either designing new testing platforms or performing experiments with simulant fluids on existing microgravity platforms. With the acquired data, theoretical flow physics models and numerical simulations can then be validated for use under long-duration microgravity conditions. The acquired data and validated models will enable the deployment of game-changing thermal management systems with remarkably improved efficiency and stability in heat acquisition, transport, and rejection for long-duration space missions.

Fluid mechanics↗

Development of A Maximum Anti-Slosh Baffle Pressure Load Model

The sloshing of propellants can affect the stability of a spacecraft and the integrity of the tank structure. Undesirable sloshing can be controlled by the addition of anti-slosh baffles, and the spacing and configuration of baffles are driven by damping requirements. The structural design of the baffle is determined after consideration of many factors, such as the strength and rigidity needed to support the baffle for its lifetime. Therefore, knowledge of distributed pressure loading is important for detailed structural design. In addition, the resultant force and moment produced by the distributed pressure are of direct importance to the design of a vehicle’s control system. Previous experimental investigations have been conducted to determine the liquid pressure loads and slosh damping associated with a rigid ring baffle. The results suggested that when the nondimensional velocity parameter is larger than 1.0, the theories agree with the test. However, when the velocity parameter is less than 1.0, all theories are nonconservative and under-predict the pressure loads. The present study has derived a maximum pressure load on the slosh baffle based on the energy conservation principle. It is verified from CFD that pressure in the slosh flow field can be decomposed into static and transient components. The CFD results confirm that there is a phase shift in pressure across the baffle, which depends on the fluid damping. Higher damping leads to a higher phase shift. The CFD investigation further verifies the proposed theory: the maximum pressure load occurs when the phase shift is 90 degrees. A comparison of the present computational results to the previous comprehensive experimental data validates the maximum pressure theory. When the baffle is submerged, the maximum pressure theory envelopes all the experimental data points.

CFD↗

Building America Case Study: Cold Climate Foundation Wall Hygrothermal Research Facility, Cloquet, Minnesota (Fact Sheet)

This report focuses on the progress made to date and the technical details of the experiment. An overview of the experimental data being collected with some interesting highlights noted thus far is also provided. A full analysis of the experimental data and the drawing of conclusions with regard to the thermal and hygrothermal performance of the retrofit foundation insulation systems tested will only be possible after a full year of data has been collected in 2014.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Solid Secondary Waste Immobilization in Cementitious Waste Forms at the Hanford Site - 19081

During operations of the Hanford Tank Waste Treatment and Immobilization Plant, solid secondary wastes (SSW) will be generated. These materials include HEPA filters, granular activated carbon (GAC), and silver mordenite (AgM). The planned disposal pathway for SSW is through solidification (blending) or encapsulation in a cementitious waste form and then disposal on site at the Hanford Site's Integrated Disposal Facility. Performance assessment evaluations of SSW forms have been performed; however, limited experimental data on simulated SSW is available as input. This paper will cover efforts to fill this gap in experimental data through testing of simulated SSW materials. Two grout formulations were used in the tests: 1) Hanford grout mix 5, a mix of 25 wt% ordinary Portland cement (OPC) and 75 wt% fly ash (FA); and 2) the Cast Stone dry blend of 47 wt% blast furnace slag, 45 wt% FA, and 8 wt% OPC. The sorption (Kd) of potential contaminants (iodide, iodate, technetium) to the grouts and SSW materials was investigated in simulated grout pore water. Waste forms containing GAC and AgM were prepared using the two grout formulations and characterized using scanning electron microscopy energy dispersive X-ray spectroscopy and X-ray diffraction. Acquiring this information will further support the candidacy of cementitious waste forms to be used for disposal of SSW at Hanford. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mechanistic Fission Gas Release Uncertainty Induced by Microstructure Data

Fission Gas Release (FGR) is an important engineering safety parameter for nuclear fuel. While fuel performance modeling with BISON currently relies on mechanistic models to predict it, comparison with experimental data shows both under or over prediction depending on operation mode (steady or transient).Predicting microstructure data is essential to accurately predicts the engineering scale parameters. An important source of uncertainty in mechanistic models arises from the missing captured physics. Continuous validation and refinement of these models against experimental data are also necessary to ensure their reliability and accuracy in predicting engineering parameters.

36 - MATERIALS SCIENCE↗

Role of Triple Phonon Excitations on Large Angle Quasi-elastic Scattering of {sup 54}Cr+{sup 208}Pb System

We study the large angle quasi-elastic scattering of {sup 54}Cr+{sup 208}Pb system in terms of the full-order coupled-channels formalism. We especially investigate the role of single, double and triple phonon excitations on quasi-elastic scattering cross section as well as quasi-elastic barrier distribution of this system for which the experimental data have been measured. It is shown that the triple phonon excitations both in {sup 54}Cr and {sup 208}Pb nuclei seem to be needed by the present coupled-channels calculations in order to reproduce the experimental data of quasi-elastic cross section and barrier distribution for the {sup 54}Cr+{sup 208}Pb system. We also show that the standard value of the surface diffuseness parameter for the nuclear potential a = 0.63 fm, is preferred by the experimental quasi-elastic scattering data for this system.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structure of Ne 20 states in resonance O 16 + α elastic scattering

Background: The nuclear structure of the cluster bands in 20 Ne presents a challenge for different theoretical approaches. It is especially difficult to explain the broad 0 + , 2 + states at 9 MeV excitation energy. Simultaneously, it is important to obtain more reliable experimental data for these levels in order to quantitatively assess the theoretical framework. Purpose: To obtain new data on 20 Ne α- cluster structure. Method: Thick target inverse kinematics technique was used to study the 16 O+α resonance elastic scattering and the data were analyzed using an R matrix approach. The 20 Ne spectrum, the cluster and nucleon spectroscopic factors were calculated using cluster-nucleon configuration interaction model (CNCIM). Results: We determined the parameters of the broad resonances in 20 Ne: 0 + level at 8.77 ± 0.150 MeV with a width of 750 $^{+500}_{-220}$ keV; 2 + level at 8.75 ± 0.100 MeV with the width of 695 ± 120 keV; the width of 9.48 MeV level of 65 ± 20 keV and showed that 9.19 MeV, 2 + level (if exists) should have width ≤ 10 keV. The detailed comparison of the theoretical CNCIM predictions with the experimental data on cluster states was made. Conclusions: Our experimental results by the TTIK method generally confirm the adopted data on α-cluster levels in 20 Ne. The CNCIM gives a good description of the 20 Ne positive parity states up to an excitation energy of ~7 MeV, predicting reasonably well the excitation energy of the states and their cluster and single particle properties. At higher excitations, the qualitative disagreement with the experimentally observed structure is evident, especially for broad resonances.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

CTF (Subchannel) Calculations and Validation L3:VVI.H2L.P15.01

The goal of the Verification and Validation Implementation (VVI) High to Low (Hi2Lo) process is utilizing a validated model in a high resolution code to generate synthetic data for improvement of the same model in a lower resolution code. This process is useful in circumstances where experimental data does not exist or it is not sufficient in quantity or resolution. Data from the high-fidelity code is treated as calibration data (with appropriate uncertainties and error bounds) which can be used to train parameters that affect solution accuracy in the lower-fidelity code model, thereby reducing uncertainty. This milestone presents a demonstration of the Hi2Lo process derived in the VVI focus area. The majority of the work performed herein describes the steps of the low-fidelity code used in the process with references to the work detailed in the companion high-fidelity code milestone (Reference 1). The CASL low-fidelity code used to perform this work was Cobra Thermal Fluid (CTF) and the high-fidelity code was STAR-CCM+ (STAR). The master branch version of CTF (pulled May 5, 2017 – Reference 2) was utilized for all CTF analyses performed as part of this milestone. The statistical and VVUQ components of the Hi2Lo framework were performed using Dakota version 6.6 (release date May 15, 2017 – Reference 3). Experimental data from Westinghouse Electric Company (WEC – Reference 4) was used throughout the demonstrated process to compare with the high-fidelity STAR results. A CTF parameter called Beta was chosen as the calibration parameter for this work. By default, Beta is defined as a constant mixing coefficient in CTF and is essentially a tuning parameter for mixing between subchannels. Since CTF does not have turbulence models like STAR, Beta is the parameter that performs the most similar function to the turbulence models in STAR. The purpose of the work performed in this milestone is to tune Beta to an optimal value that brings the CTF results closer to those measured in the WEC experiments.

97 MATHEMATICS AND COMPUTING↗

Viability of the matter bounce scenario in Loop Quantum Cosmology from BICEP2 last data

The CMB map provided by the Planck project constrains the value of the ratio of tensor-to-scalar perturbations, namely r, to be smaller than 0.11 (95 % CL). This bound rules out the simplest models of inflation. However, recent data from BICEP2 is in strong tension with this constrain, as it finds a value r=0.20{sup +0.07}{sub -0.05} with 0r= disfavored at 7.0 σ, which allows these simplest inflationary models to survive. The remarkable fact is that, even though the BICEP2 experiment was conceived to search for evidence of inflation, its experimental data matches correctly theoretical results coming from the matter bounce scenario (the alternative model to the inflationary paradigm). More precisely, most bouncing cosmologies do not pass Planck's constrains due to the smallness of the value of the tensor/scalar ratio r≤ 0.11, but with new BICEP2 data some of them fit well with experimental data. This is the case with the matter bounce scenario in the teleparallel version of Loop Quantum Cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

Temperature-dependent excitonic absorption in long-period multiple In{sub x}Ga{sub 1-x}As/GaAs quantum well structures

Temperature variations in the fundamental absorption edge of long-period In{sub x}Ga{sub 1-x}As/GaAs structures are studied for samples with different numbers of quantum wells and similar periods. The quantum wells were close in composition and width. Experimental data are interpreted in the model of exciton-polariton light transfer involving localized excitons in confined structures with a finite number of quantum wells. The experimentally observed low-temperature anomaly of the integrated absorption coefficient is attributed to reemission of resonance localized excitons along a finite chain of quantum wells, with no excitonic transfer. The radiative decay time of an exciton in a single quantum well is estimated from the experimental data. It is demonstrated that, at low temperatures, the major contribution to the width of the experimentally observed absorption line corresponding to the ground heavy-hole exciton state is made by inhomogeneous broadening of the line by the field of potential fluctuations associated with the compositional disorder of the alloy. At low temperatures, the inhomogeneous broadening is much more pronounced than the broadening governed by the true radiative and nonradiative dissipative decay.

36 MATERIALS SCIENCE↗

Investigation of the fragmentation of an explosively driven cylinder

Explosively driven fragmentation is highly complex. To better understand the field detonation, different methodologies (Lagrangian (with a failure threshold in VisIt and element erosion), ALE and embedded grid) were simulated to provide a comparison to the experimental data through the utilization of fragment distributions and gross deformation metrics. Provided with the geometrical parameters and the results from the experimental data, the computer simulations were conducted after the successful writing of each input file. Mesh refinement – a scalar multiplier applied to the mesh to refine the results – was then studied. The objective was to find a value that parallels the experimental results as the mesh can be refine indefinitely, theoretically. Various mesh resolution scales were simulated and the results graphically compared, using the damage and failure variables from a statistical Johnson Cook failure model, the number of fragments over time as well as time required for each simulation to run and number of processors utilized. The desired result is a calculated method to quantify the comparison being performed.

36 MATERIALS SCIENCE↗

Combining Experiments and Simulations of Extraction Kinetics and Thermodynamics in Advanced Separation Processes for Used Nuclear Fuel

This 3-year project was a collaboration between University of California Irvine (UC Irvine), Pacific Northwest National Laboratory (PNNL), Idaho National Laboratory (INL), Argonne National Laboratory (ANL) and with an international collaborator at ForschungZentrum Jülich (FZJ). The project was led from UC Irvine under the direction of Profs. Mikael Nilsson and Hung Nguyen. The leads at PNNL, INL, ANL and FZJ were Dr. Liem Dang, Dr. Peter Zalupski, Dr. Nathaniel Hoyt and Dr. Giuseppe Modolo, respectively. Involved in this project at UC Irvine were three full time PhD graduate students, Tro Babikian, Ted Yoo, and Quynh Vo, and one MS student, Alba Font Bosch. The overall objective of this project was to study how the kinetics and thermodynamics of metal ion extraction can be described by molecular dynamic (MD) simulations and how the simulations can be validated by experimental data. Furthermore, the project includes the applied separation by testing the extraction systems in a single stage annular centrifugal contactor and coupling the experimental data with computational fluid dynamic (CFD) simulations. Specific objectives of the proposed research were: Study and establish a rigorous connection between MD simulations based on polarizable force fields and extraction thermodynamic and kinetic data. Compare and validate CFD simulations of extraction processes for An/Ln separation using different sizes (and types) of annular centrifugal contactors. Provide a theoretical/simulation and experimental base for scale-up of batch-wise extraction to continuous contactors. We approached objective 1 and 2 in parallel. For objective 1 we started by studying a well established extraction system with a relatively simple extraction mechanism, namely tributyl phosphate. What we found was that well optimized simulations can inform experiments and new information on TBP behavior was presented in this project, as well be discussed below. The second objective proved a larger challenge and most of the efforts were devoted to experimental studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quantification of gypsum crystal nucleation, growth, and breakage rates in a wet flue gas desulfurization pilot plant

The aim of this work is to study the influence of nucleation, growth and breakage on the particle size distribution (PSD) of gypsum crystals produced by the wet flue gas desulfurization (FGD) process. The steady state PSD, obtained in a falling film wet FGD pilot plant during desulfurization of a 1000 ppm(V) SO{sub 2} gas stream, displayed a strong nonlinear behaviour (in a ln(n(l)) vs. I plot) at the lower end of the particle size range, compared to the well-known linear mixed suspension mixed product removal model. A transient population balance breakage model, fitted to experimental data, was able to model an increase in the fraction of small particles, but not to the extent observed experimentally. A three-parameter, size-dependent growth model, previously used for sodium sulphate decahydrate and potash alum, was able to describe the experimental data, indicating either size-dependent integration kinetics or growth rate dispersion.

01 COAL, LIGNITE, AND PEAT↗

Electrons to Reactors Multiscale Modeling: Catalytic CO Oxidation over RuO 2

First-principles kinetic Monte Carlo (1p-kMC) simulations for CO oxidation on two RuO 2 facets, RuO 2 (110) and RuO 2 (111), were coupled to the computational fluid dynamics (CFD) simulations package MFIX, and reactor-scale simulations were then performed. 1p-kMC coupled with CFD has recently been shown as a feasible method for translating molecular scale mechanistic knowledge to the reactor scale, enabling comparisons to in situ and online experimental measurements. Only a few studies with such coupling have been published. This work incorporates multiple catalytic surface facets into the scale-coupled simulation, and three possibilities were investigated: the two possibilities of each facet individually being the dominant phase in the reactor, and also the possibility that both facets were present on the catalyst particles in the ratio predicted by an ab initio thermodynamics-based Wulff construction. When lateral interactions between adsorbates were included in the 1p-kMC simulations, the two surfaces, RuO 2 (110) and RuO 2 (111), were found to be of similar order-of-magnitude in activity for the pressure range of 1 × 10 –4 bar to 1 bar, with the RuO 2 (110) surface-termination showing more simulated activity than the RuO 2 (111) surface-termination. Coupling between the 1p-kMC and CFD was achieved with a lookup table generated by the error-based modified Shepard interpolation scheme. Isothermal reactor scale simulations were performed and compared to two separate experimental studies, conducted with reactant partial pressures of ≤0.1 bar. Simulations without an isothermality restriction were also conducted and showed that the simulated temperature gradient across the catalytic reactor bed is <0.5 K, which validated the use of the isothermality restriction for investigating the reactor-scale phenomenological temperature dependences. The approach with the Wulff construction based reactor simulations reproduced a trend similar to one experimental data set relatively well, with the (110) surface being more active at higher temperaures; in contrast, for the other experimental data set, our reactor simulations achieve surprisingly and perhaps fortuitously good agreement with the activity and phenomenological pressure dependence when it is assumed that the (111) facet is the only active facet present. Lastly, the active phase of catalytic CO oxidation over RuO 2 remains unsettled, but the present study presents proof of principle (and progress) toward more accurate multiscale modeling from electrons to reactors and new simulation results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaction Kinetics of CO2 Carbonation with Mg-Rich Minerals

Due to their low price, wide availability, and stability of the resulting carbonates, Mg-rich minerals are promising materials for carbonating CO{sub 2}. Direct carbonation of CO{sub 2} with Mg-rich minerals reported in this research for the first time could be considerably superior to conventional liquid extraction processes from an energy consumption perspective due to its avoidance of the use of a large amount of water with high specific heat capacity and latent heat of vaporization. Kinetic models of the reactions of the direct CO{sub 2} carbonation with Mg-rich minerals and within simulated flue gas environments are important to the scale-up of reactor designs. Unfortunately, such models have not been made available thus far. This research was initiated to fill that gap. Magnesium silicate (Mg{sub 2}SiO{sub 4}), a representative compound in Mg-rich minerals, was used to study CO{sub 2} carbonation reaction kinetics under given simulated flue gas conditions. It was found that the chosen sorbent deactivation model fits well the experimental data collected under given conditions. A reaction order of 1 with respect to CO{sub 2} is obtained from experimental data. The Arrhenius form of CO{sub 2} carbonation with Mg{sub 2}SiO{sub 4} is established based on changes in the rate constants of the chosen deactivation model as a function of temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate thermoelastic tensor and acoustic velocities of NaCl

Despite the importance of thermoelastic properties of minerals in geology and geophysics, their measurement at high pressures and temperatures are still challenging. Thus, ab initio calculations are an essential tool for predicting these properties at extreme conditions. Owing to the approximate description of the exchange-correlation energy, approximations used in calculations of vibrational effects, and numerical/methodological approximations, these methods produce systematic deviations. Hybrid schemes combining experimental data and theoretical results have emerged as a way to reconcile available information and offer more reliable predictions at experimentally inaccessible thermodynamics conditions. Here we introduce a method to improve the calculated thermoelastic tensor by using highly accurate thermal equation of state (EoS). The corrective scheme is general, applicable to crystalline solids with any symmetry, and can produce accurate results at conditions where experimental data may not exist. We apply it to rock-salt-type NaCl, a material whose structural properties have been challenging to describe accurately by standard ab initio methods and whose acoustic/seismic properties are important for the gas and oil industry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic properties of the FeSe/STO interface from first-principle calculations

We perform first-principle calculations of the FeSe monolayer on STO with the focus on three central aspects. First, compared to experiment, the bulk lattice constant of FeSe is too small in LDA, PBEsol and Perdew–Burgke–Ernzerhof (PBE) type exchange-correlation (xc) functionals while in bulk SrTiO 3 (STO) LDA over-binds, PBE under-binds and PBEsol agrees best with experiment. Thus, the strain in the FeSe monolayer on STO depends on the xc functional and, especially in the non-magnetic state, is strongly overestimated and best described in PBEsol. In agreement with earlier work, we find that the band structure of the checkerboard antiferromagnetic configuration agrees best with experiment where, in addition, the relative strain on FeSe is best described. Second, our focus is on the crystal structure of the interface itself. The FeSe/STO distance depends weakly on the presence of magnetism and PBE results agree best with recent experimental data. We find that a double TiO 2 -layer below the FeSe relaxes to a structure in disagreement with experimental data. On the other hand, considering the effect of oxygen-vacancies in the single TiO 2 terminated slab within the virtual crystal approximation, in agreement with recent experiment, the FeSe monolayer Ti layer distance increases for a small vacancy concentration (<20%). Third, we investigate the charge-transfer to FeSe due to oxygen-vacancies in STO. Interestingly, we find negligible charge transfer for small concentrations—only above 20% a significant charge transfer is observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗