Search NASA⌕ Search

SEARCH · Search NASA

Results for “fractional diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Evaluating the efficacy of DGT to quantify copper in stormwater at end-of-pipe

In many cases, stormwater compliance monitoring is labor intensive, expensive, and largely unsuccessful in providing the data needed to support stormwater management goals. To help address these issues, diffusive gradients in thin film (DGTs), time-integrative passive samplers for metals, were evaluated to monitor copper in stormwater runoff. DGTs were co-located with traditional autosamplers within the stormwater conveyance systems at Naval Base San Diego (NBSD) to provide a direct comparison with composite sampling. DGTs were exposed in the laboratory to flow-averaged composite samples from NBSD stormwater conveyance systems. These experiments showed increasing uptake over time (range = 1.5 to 24 h) for copper, with positive, linear correlations (r2>0.980) between exposure duration and copper mass accumulated. However, it appears that the corresponding calculations of the DGT-labile fraction (CDGT) relative to the dissolved fraction fluctuated across the different exposure durations. In general, trends observed for CDGT measurements from the field were consistent with trends in the lab DGT exposures and traditional dissolved metal measurements from composite samples. Finally, time-weighted average copper concentrations from DGTs deployed for the first and second parts of storm events were within 30% of measurements from DGTs that were deployed for the entire storm event in the same stormwater vault. Cumulatively, these results show promise for continuous monitoring with DGTs as an approach that produces data more representative of exposure to the receiving environment during episodic events than data from traditional grab or composite chemistry sampling, and can represent significant cost savings.

Diffusive Gradient in Thin Films, stormwater, trac↗

Indium hydroxide to oxide decomposition observed in one nanocrystal during in situ transmission electron microscopy studies

The high-resolution transmission electron microscopy (HR-TEM) is used to study, in situ, spatially resolved decomposition in individual nanocrystals of metal hydroxides and oxyhydroxides. This case study reports on the decomposition of indium hydroxide (c-In(OH){sub 3}) to bixbyite-type indium oxide (c-In{sub 2}O{sub 3}). The electron beam is focused onto a single cube-shaped In(OH){sub 3} crystal of {l_brace}100{r_brace} morphology with ca. 35 nm edge length and a sequence of HR-TEM images was recorded during electron beam irradiation. The frame-by-frame analysis of video sequences allows for the in situ, time-resolved observation of the shape and orientation of the transformed crystals, which in turn enables the evaluation of the kinetics of c-In{sub 2}O{sub 3} crystallization. Supplementary material (video of the transformation) related to this article can be found online at (10.1016/j.jssc.2012.09.022). After irradiation the shape of the parent cube-shaped crystal is preserved, however, its linear dimension (edge) is reduced by the factor 1.20. The corresponding spotted selected area electron diffraction (SAED) pattern representing zone [001] of c-In(OH){sub 3} is transformed to a diffuse strongly textured ring-like pattern of c-In{sub 2}O{sub 3} that indicates the transformed cube is no longer a single crystal but is disintegrated into individual c-In{sub 2}O{sub 3} domains with the size of about 5-10 nm. The induction time of approximately 15 s is estimated from the time-resolved Fourier transforms. The volume fraction of the transformed phase (c-In{sub 2}O{sub 3}), calculated from the shrinkage of the parent c-In(OH){sub 3} crystal in the recorded HR-TEM images, is used as a measure of the kinetics of c-In{sub 2}O{sub 3} crystallization within the framework of Avrami-Erofeev formalism. The Avrami exponent of {approx}3 is characteristic for a reaction mechanism with fast nucleation at the beginning of the reaction and subsequent three-dimensional growth of nuclei with a constant growth rate. The structural transformation path in reconstructive decomposition of c-In(OH){sub 3} to c-In{sub 2}O{sub 3} is discussed in terms of (i) the displacement of hydrogen atoms that lead to breaking the hydrogen bond between OH groups of [In(OH){sub 6}] octahedra and finally to their destabilization and (ii) transformation of the vertices-shared indium-oxygen octahedra in c-In(OH){sub 3} to vertices- and edge-shared octahedra in c-In{sub 2}O{sub 3}. - Graphical abstract: Frame-by-frame analysis of video sequences recorded of HR-TEM images reveals that a single cube-shaped In(OH){sub 3} nanocrystal with {l_brace}100{r_brace} morphology decomposes into bixbyite-type In{sub 2}O{sub 3} domains while being imaged. The mechanism of this decomposition is evaluated through the analysis of the structural relationship between initial (c-In(OH){sub 3}) and transformed (c-In{sub 2}O{sub 3}) phases and though the kinetics of the decomposition followed via the time-resolved shrinkage of the initial crystal of indium hydroxide. Highlights: Black-Right-Pointing-Pointer In-situ time-resolved High Resolution Transmission Electron Microscopy. Black-Right-Pointing-Pointer Crystallographic transformation path. Black-Right-Pointing-Pointer Kinetics of the decomposition in one nanocrystal.

36 MATERIALS SCIENCE↗

X‑ray Coherent Diffractive Imaging of Large Helium Nanodroplets Doped with Small Molecules

We report the first X-ray coherent diffractive imaging experiment on molecule-doped helium nanodroplets. It complements previous work, where we reported single-shot X-ray coherent diffractive imaging studies of Xe dopant clusters formed in 4He and 3He droplets. These noble gas clusters were used to visualize the impact of rotational excitation of the droplets on the spatial distribution of atomic dopants within the droplets, and to study the differences and connections between quantum and classical droplet rotational motion. Here, we expand our studies to the molecular dopants CF4, CHF3, CH3CN, and SF6, imaged with 1.5 keV photons. We find multiple Bragg spots in the diffraction patterns of molecule-doped droplets with radii of approximately 600 nm, which provide evidence that molecules form elongated clusters with preferential alignment along the angular momentum axis of the 4He droplets, in agreement with our previous results on the aggregation of Xe clusters on quantum vortices. Real-space reconstructions of molecular dopant cluster density profiles are obtained for droplets with smaller radii of approximately 300 nm. The diffuse images suggest the formation of low-density, potentially porous, molecular clusters upon aggregation at T = 0.4 K in 4He droplets. In the normal fluid 3He droplets, molecules aggregate into loose clusters on the droplets' equator, similar to previous observations for Xe atoms. Time-of-flight mass spectra reveal that the doped helium nanodroplet moieties fragment extensively into constituent atomic ions, producing only a small fraction of molecular fragment ions. The findings are discussed in the context of previously proposed schemes to use He droplets as potential tamper materials for ultrafast X-ray imaging experiments.

Feinberg, AlexandraJ↗

THE BLAZAR SEQUENCE AND THE COSMIC GAMMA-RAY BACKGROUND RADIATION IN THE FERMI ERA

We present a new model of the blazar gamma-ray luminosity function (GLF) and the spectrum of the extragalactic gamma-ray background (EGRB), which is consistent with the observed distributions of EGRET (Energetic Gamma-Ray Experiment Telescope) blazars. The unified sequence of blazar spectral energy distribution is taken into account to make a nontrivial prediction for the EGRB spectrum and more realistic comparison with the data than previous studies. We then try to explain the EGRB data by the two AGN populations: one is blazars, and the other is nonblazar AGNs that are responsible for the EGRB in the MeV band. We find that {approx}80% of the EGRB photon flux at >100 MeV can be explained by the sum of the two populations, while {approx}45% can be accounted for only by blazars. The predicted EGRB spectrum is in agreement with a wide range of the observed data from X-ray to GeV, within the systematic uncertainties in the EGRB determination by EGRET. These results indicate that AGNs including blazars are the primary source of EGRB. Blazars are dominant in EGRB at higher energy bands of {approx}>100 MeV, while nonblazar AGNs dominate at {approx}<100 MeV. Almost all of the EGRB flux from blazars will be resolved into discrete sources by the Fermi Gamma-ray Space Telescope, while that from nonblazar AGNs will largely remain unresolved. Therefore, the comparison between the integrated source counts and diffuse EGRB flux as a function of photon energy will give a simple and clear test of our model. Various quantitative predictions for Fermi observations are also made. Especially, our model predicts 600-1200 blazars in all sky down to 2 x 10{sup -9} photons cm{sup -2} s{sup -1} (>100 MeV), which is considerably smaller than most of previous studies. We find that the fraction of EGRB energy flux absorbed in intergalactic medium (IGM) is not large, and the cascade component reprocessed in IGM does not significantly alter the EGRB spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

HIGH-REDSHIFT X-RAY COOLING-CORE CLUSTER ASSOCIATED WITH THE LUMINOUS RADIO-LOUD QUASAR 3C 186

We present the first results from a new, deep (200 ks) Chandra observation of the X-ray luminous galaxy cluster surrounding the powerful (L {approx} 10{sup 47} erg s{sup -1}), high-redshift (z = 1.067), compact-steep-spectrum radio-loud quasar 3C 186. The diffuse X-ray emission from the cluster has a roughly ellipsoidal shape and extends out to radii of at least {approx}60 arcsec ({approx}500 kpc). The centroid of the diffuse X-ray emission is offset by 0.68 {+-} 0.''11 ({approx}5.5 {+-} 0.9 kpc) from the position of the quasar. We measure a cluster mass within the radius at which the mean enclosed density is 2500 times the critical density, r{sub 2500} = 283{sup +18}{sub -13} kpc, of 1.02{sup +0.21}{sub -0.14} x 10{sup 14} M{sub sun}. The gas-mass fraction within this radius is f{sub gas} = 0.129{sup +0.015}{sub -0.016}. This value is consistent with measurements at lower redshifts and implies minimal evolution in the f{sub gas}(z) relation for hot, massive clusters at 0 < z < 1.1. The measured metal abundance of 0.42{sup +0.08}{sub -0.07} Solar is consistent with the abundance observed in other massive, high-redshift clusters. The spatially resolved temperature profile for the cluster shows a drop in temperature, from kT {approx} 8 keV to kT {approx} 3 keV, in its central regions that is characteristic of cooling-core clusters. This is the first spectroscopic identification of a cooling-core cluster at z>1. We measure cooling times for the X-ray emitting gas at radii of 50 kpc and 25 kpc of 1.7 {+-} 0.2 x 10{sup 9} years and 7.5 {+-} 2.6 x 10{sup 8} years, as well as a nominal cooling rate (in the absence of heating) of 400 {+-} 190 M{sub sun} year{sup -1} within the central 100 kpc. In principle, the cooling gas can supply enough fuel to support the growth of the supermassive black hole and to power the luminous quasar. The radiative power of the quasar exceeds by a factor of 10 the kinematic power of the central radio source, suggesting that radiative heating may be important at intermittent intervals in cluster cores.

79 ASTRONOMY AND ASTROPHYSICS↗

SPECTRUM AND MORPHOLOGY OF THE TWO BRIGHTEST MILAGRO SOURCES IN THE CYGNUS REGION: MGRO J2019+37 AND MGRO J2031+41

The Cygnus region is a very bright and complex portion of the TeV sky, host to unidentified sources and a diffuse excess with respect to conventional cosmic-ray propagation models. Two of the brightest TeV sources, MGRO J2019+37 and MGRO J2031+41, are analyzed using Milagro data with a new technique, and their emission is tested under two different spectral assumptions: a power law and a power law with an exponential cutoff. The new analysis technique is based on an energy estimator that uses the fraction of photomultiplier tubes in the observatory that detect the extensive air shower. The photon spectrum is measured in the range 1-100 TeV using the last three years of Milagro data (2005-2008), with the detector in its final configuration. An F-test indicates that MGRO J2019+37 is better fit by a power law with an exponential cutoff than by a simple power law. The best-fitting parameters for the power law with exponential cutoff model are a normalization at 10 TeV of 7{sup +5}{sub -2} Multiplication-Sign 10{sup -10} s{sup -1} m{sup -2} TeV{sup -1}, a spectral index of 2.0{sup +0.5}{sub -1.0}, and a cutoff energy of 29{sup +50}{sub -16} TeV. MGRO J2031+41 shows no evidence of a cutoff. The best-fitting parameters for a power law are a normalization of 2.1{sup +0.6}{sub -0.6} Multiplication-Sign 10{sup -10} s{sup -1} m{sup -2} TeV{sup -1} and a spectral index of 3.22{sup +0.23}{sub -0.18}. The overall flux is subject to a {approx}30% systematic uncertainty. The systematic uncertainty on the power-law indices is {approx}0.1. Both uncertainties have been verified with cosmic-ray data. A comparison with previous results from TeV J2032+4130, MGRO J2031+41, and MGRO J2019+37 is also presented.

79 ASTRONOMY AND ASTROPHYSICS↗

DNS of Flame Stabilization Dynamics of a Swirl-Stabilized Spray Burner Using Sustainable Aviation Fuels

Concern for emission reduction has motivated the development of new cost-effective alternative sustainable aviation fuels (SAFs). Drop-in SAFs with blends of the certified and the alternative fuels are beneficial because they do not require engine modifications for use in current aviation engines. Combustion characteristics are of particular concern when comparing a new fuel with Jet-A. Lean blow-off and flame stabilization have been identified to be governed by the fuel propensity to autoignition, i.e. derived cetane number. However, fundamental investigation is required to identify the impact of derived cetane number on the combustion mode of flame stabilization in a realistic combustor. The combustion mode has also a direct impact on turbulent combustion modeling closures. DNS simulations are performed in the low-Mach solver of the Pele Suite called PeleLMeX. Lagrangian multi-phase modeling is used to capture the liquid spray injection of Jet-A (reference fuel) and C1 as a representative of a low cetane number SAF. Adaptive Mesh Refinement (AMR) is used to enable a more efficient simulation of a more realistic domain size and embedded boundary treatment is used to model a bluff-body geometry. Local extinction and edge flame propagation were observed for both fuels. The edge flame propagation mode was quantified in terms of a Damkohler number defined as the ratio between progress variable reaction rate and its diffusive flux. Initial analysis suggests that a mixed mode combustion occurs for the edge flame propagation, with flame propagation assisted by ignition and autoignition co-existing for both Jet-A and C1 flames. The analysis of the extinction region shows a larger progress variable for Jet-A which can further increase the local displacement speed and present a faster reignition of the stoichiometric mixture fraction.

adaptive mesh refinement↗

Two phase choke flow in tubes with very large L/D

Two phase and gaseous choked flow data for fluid nitrogen were obtained for a test section which was a long constant area duct of 16 200 L/D with a diverging diffuser attached to the exit. Flow rate data were taken along five isotherms (reduced temperature of 0.81, 0.96, 1.06, 1.12, and 2.34) for reduced pressures to 3. The flow rate data were mapped in the usual manner using stagnation conditions at the inlet mixing chamber upstream of the entrance length. The results are predictable by a two-phase homogeneous equilibrium choking flow model which includes wall fraction. A simplified theory which in essence decouples the long tube region from the high acceleration choking region also appears to predict the data reasonably well, but about 15 percent low.

Hendricks, R. C.↗

The surface albedo of the earth in the near ultraviolet /330-340 nm/

Satellite-borne measurements of solar radiation backscattered by the earth and atmosphere allow a determination of the surface albedo in the near ultraviolet. The data yielded albedos at tropical latitudes during a 15-month period in 1979-1980. The wavelengths studied are 331.2 and 339.8 nm. Sixty-nine percent of the measurements imply albedos less than 0.3. Higher values include a contribution due to reflection from clouds and are consistent with previous estimates of the fractional cloudover in the tropics. An albedo histogram based on a bin width of 0.1 shows results in the range 0.1-0.2 to be the most frequent, appearing in 29% of the cases, although values which span the entire range 0.0-1.0 are present. The derived albedos show no correlation with solar zenith angle. This result is consistent with the fact that, at the wavelengths considered, the diffuse integrated intensity is larger than the attenuated direct solar beam near the ground.

Frederick, J. E.↗

Accuracy of approximations to the Navier-Stokes equations

The systems of truncated differential equations that have been proposed to reduce the complexity and large computational costs of solutions to the full Navier-Stokes equations are considered. These systems are computationally efficient and capture all the physically relevant behavior. The systems follow a certain hierarchy: (1) the classical boundary-layer equations with specified edge properties (usually the streamwise pressure distribution); (2) the coupled boundary-layer/inviscid equations; (3) the so-called thin-layer equations that discard streamwise diffusion; and (4) the Navier-Stokes equations. Consideration is given to each of these approximations applied to an incompressible, laminar-separating flow at low and moderate Reynolds numbers. It is pointed out that for any flow or region of flow for which viscous-inviscid interaction effects are small, classical boundary-layer equations will provide a satisfactory description of the viscous flow at a fraction of the computational cost of any higher approximations.

Murphy, J. D.↗

Flame propagation under partially-premixed conditions

This study concentrates on developing a better understanding of triple flames. We relax the assumption of zero heat release, address the issue of stabilization, and, in order to investigate the role that heat release plays in flame propagation in partially premixed combustion, we return to a simple flow field and investigate the behavior of flames in a laminar environment. We solve the compressible Navier-Stokes equations in a two-dimensional domain. At the boundaries, we use an inflow boundary condition on the left and nearly-perfect reflective boundary conditions, required to avoid pressure drift, at the outflow and sides. After the flow and flame are initialized, the mixture fraction is varied at the inlet from its uniform stoichiometric value to a tanh profile varying from zero to one. As the mixture fraction gradient reaches the flame surface only the centerline is exposed to the stoichionetric mixture fraction and locally maintains the planar flame speed and reaction rate. Above this point the mixture is fuel rich, and below fuel lean. As a result, these regions of non-unity equivalence ratio burn less, the reaction rate drops, and the local flame speed is reduced. The excess fuel and oxidizer then combine behind the premixed flame along the stoichiometric surface and burn in a trailing diffusion flame. Thus the 'triple' flame refers to the fuel-rich premixed flame, the fuel-lean premixed flame, and the trailing diffusion flame. Due to heat release, the normal velocity across the flame is increased, whereas the tangential component remains unchanged. Far-field flame speed, local flame speed, and their differences are shown as a function of the local mixing thickness. It was also determined that the lateral position of the flame affects stabilization, and the distribution of the reaction rate along the premixed wings of triple flames affects flame propagation.

Ruetsch, Gregory R.↗

Interrelationships Between Aerosol Characteristics and Light Scattering During Late-winter in a Eastern Mediterranean Arid Environment

An intensive field campaign involving measurement of various aerosol physical, chemical, and radiative properties was conducted at Sde Boker in the Negev Desert of Israel, from 18 February to 15 March 1997. Nephelometer measurements gave average background scattering coefficient values of about 25 M/m at 550 nm wavelength, but strong dust events caused the value of this parameter to rise up to about 800 M/m Backscattering fractions did not depend on aerosol loading, and generally fell in the range of 0.1 to 0.25, comparable to values reported for marine and Arctic environments. Chemical analysis of the aerosol revealed that, in the coarse size range (2 - 10 micrometer equivalent aerodynamic diameter (EAD)), calcium (Ca) was by far the most abundant element followed by silicon (Si), both of which are indicators for mineral dust. In the fine size fraction (< 2 micrometers EAD), sulfur (S) generally was the dominant element, except during high dust episodes when Ca and Si were again the most abundant. Furthermore, fine black carbon (BC) correlates with S, suggesting that they may have originated from the same sources or source regions. An indication of the short-term effect of aerosol loading on radiative forcing was provided by measurements of global and diffuse solar radiation, which showed that during high turbidity periods (strong dust events) almost all of the solar radiation reaching the area is scattered or absorbed.

Ichoku, C.↗

Spectrum and Morphology of the Two Brightest Milagro Sources in the Cygnus Region: MGRO J2019+37 and MGRO J2031+41

The Cygnus region is a very bright and complex portion of the TeV sky, host to unidentified sources and a diffuse excess with respect to conventional cosmic-ray propagation models. Two of the brightest TeV sources, MGRO J2019+37 and MGRO J2031+41, are analyzed using Milagro data with a new technique, and their emission is tested under two different spectral assumptions: a power law and a power law with an exponential cutoff. The new analysis technique is based on an energy estimator that uses the fraction of photomultiplier tubes in the observatory that detect the extensive air shower. The photon spectrum is measured in the range 1-100 TeV using the last three years of Milagro data (2005-2008), with the detector in its final configuration. An F-test indicates that MGRO J2019+37 is better fit by a power law with an exponential cutoff than by a simple power law. The best-fitting parameters for the power law with exponential cutoff model are a normalization at 10 TeV of 7(sup +5 sub −2) × 10(exp −10)/ s /sq m/ TeV, a spectral index of 2.0(sup +0.5 sub -10), and a cutoff energy of 29(sup +50 sub −16) TeV. MGRO J2031+41 shows no evidence of a cutoff. The best-fitting parameters for a power law are a normalization of 2.1(sup +0.6 sub −0.6) × 10(exp −10)/ s/sq m/ TeV and a spectral index of 3.22(sup +0.23 sub −0.18. The overall flux is subject to a approx.. 30% systematic uncertainty. The systematic uncertainty on the power-law indices is approx. 0.1. Both uncertainties have been verified with cosmic-ray data. A comparison with previous results from TeV J2032+4130, MGRO J2031+41, and MGRO J2019+37 is also presented.

BRIGHTEST↗

Identification of Critical Airports from the Perspective of Delay and Disruption Propagation in Air Travel Networks

It is well-known that delays and disruptions that originate at certain airports end up spreading spread on the network to other airports, sometimes straining a large fraction of the system. Hence data-driven modeling of this phenomenon is important from the standpoint of planning and strategy. In this work, utilizing the publicly available data from the Federal Aviation Administration (FAA), we employ the well-known influence maximization paradigm, to mine for the top airports in the US airport network, from the perspective of delay spread. In the process, we develop a diffusion simulator and implement a greedy algorithm to aid our task. We then explore the temporal trends by considering one winter month and one summer month in our analysis. Finally, we characterize the clusters in the US airport network and investigate the patterns of delay spread when airports in each of the clusters are affected.

Visweswara Sathanur, Arun↗

Special Analysis for Slit Trench Disposal of the Reactor Process Heat Exchangers

The Savannah River National Laboratory (SRNL), in response to a request from Solid Waste Management (SWM), conducted a Special Analysis (SA) to evaluate the performance of nineteen heat exchangers that are to be disposed in the E-Area low level waste facility Slit Trench 9 (ST 9). Although these nineteen heat exchangers were never decontaminated, the majority of the radionuclides in the heat exchanger inventory list were determined to be acceptable for burial because they are less than the 'generic' waste form inventory limits given in the 2008 Performance Assessment (PA) (WSRC, 2008). However, as generic waste, the H-3 and C-14 inventories resulted in unacceptable sum-of-fractions (SOFs). Initial scoping analyses performed by SRNL indicated that if alterations were made to certain external nozzles to mitigate various potential leak paths, acceptable SOFs could be achieved through the use of a 'Special' waste form. This SA provides the technical basis for this new 'Special' waste form and provides the inventory limits for H-3 and C-14 for these nineteen heat exchangers such that the nineteen heat exchangers can be disposed in ST 9. This 'Special' waste form is limited to these nineteen heat exchangers in ST 9 and applies for H-3 and C-14, which are designated as H-3X and C-14X, respectively. The SA follows the same methodology used in the 2008 PA and the 2008 SA except for the modeling enhancements noted below. Infiltration rates above the heat exchangers are identical to those used in the 2008 PA; however, flow through the heat exchangers is unique. Because it is unknown exactly how sealed heat exchanger openings will perform and how surface and embedded contaminants will be released, multiple base cases or scenarios were established to investigate a set of performances. Each scenario consists of flow options (based on the performance of sealed openings) and a near-field release of contaminants (based on corrosion and diffusion performance). Two disposal configurations were analyzed where heat exchangers were assumed to be disposed four across and five lengthwise (the 4x5 configuration, with one empty) and three across and seven lengthwise (the 3x7 configuration, with two empty). A large range of conditions was considered. For example, peak well concentrations at the 100-m boundary for H-3 are shown in Figure ES-1 for a wide range of configurations (i.e. release mechanism and degree of sealing options). The maximum contaminant level (MCL) and a 10% SOF goal for H-3 are also shown. The 10% goal was based on an estimated volume fraction that these nineteen heat exchangers would consume in ST 9 and was solely used for scoping purposes to assess disposal feasibility and sealing requirements. Because various line breaks and poor sealing greatly exceeded that 10% goal, the determination was made that mitigating activities were needed, such as protection from line breaks and better sealing. An initial set of scenarios was run to assess the requirements for sealing the heat exchanger openings and the need to ensure that the sealed heat exchangers stayed sealed during transit and disposal operations. After discovering that such mitigating activities were required, additional scenarios were run that included the mitigating activities. Scenarios deemed to have a very low probability of occurrence were excluded from consideration for calculating inventory limits (for example, those scenarios that assumed an instantaneous release of contaminants along with poor sealing). The SA used the most recent K d values for the C-14 analyses and the most recent Dose Conversion Factors for H-3 and C-14 which have been updated since the 2008 PA was issued. This SA took into account the location and the disposal timing of these heat exchangers. The disposal location is within a small area of the overall Slit Trench unit (about 6% of the total) and is behind a line that is 200 ft from the down-gradient edge of ST 9. The disposal timing is assumed to be after July 1, 2012 (because disposals cannot occur until this document is approved and mitigating activities are completed) which means that the disposal occurs after the first time period for the 2008 PA beta-gamma pathway (that time period is from December 1995 until December 2007), thus that pathway time period is not considered. Table ES-1 provides new 'Special' waste form groundwater pathway inventory limits for C-14X and H-3X in the heat exchangers. Inventory limits for generic C-14 and H-3 in the West Slit Trenches are included for comparison. The lowest limit for generic C-14 is 1.9E-1 Ci, while for C-14X it is 2.7E0, an increase of more than 14 times. Because time windows are employed, at later times C-14X exhibits lower limits than those for generic C-14 because with its smaller K d the C-14 moves much faster. The lowest limit for generic H-3 is 3.6E0 Ci, while for H-3X it is 1.7E3, an increase of almost 500 times.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High order finite difference methods with subcell resolution for advection equations with stiff source terms

A new high order finite-difference method utilizing the idea of Harten ENO subcell resolution method is proposed for chemical reactive flows and combustion. In reaction problems, when the reaction time scale is very small, e.g., orders of magnitude smaller than the fluid dynamics time scales, the governing equations will become very stiff. Wrong propagation speed of discontinuity may occur due to the underresolved numerical solution in both space and time. The present proposed method is a modified fractional step method which solves the convection step and reaction step separately. In the convection step, any high order shock-capturing method can be used. In the reaction step, an ODE solver is applied but with the computed flow variables in the shock region modified by the Harten subcell resolution idea. For numerical experiments, a fifth-order finite-difference WENO scheme and its anti-diffusion WENO variant are considered. A wide range of 1D and 2D scalar and Euler system test cases are investigated. Studies indicate that for the considered test cases, the new method maintains high order accuracy in space for smooth flows, and for stiff source terms with discontinuities, it can capture the correct propagation speed of discontinuities in very coarse meshes with reasonable CFL numbers.

97 MATHEMATICS AND COMPUTING↗

Enhancing Four-Carbon Olefin Production from Acetylene over Copper Nanoparticles in Metal–Organic Frameworks

Four-carbon olefins, such as 1-butene and 1,3-butadiene, are important chemical feedstocks for the production of adhesives and synthetic rubber. These compounds are found in the C 4 fraction of “green oil” products that can arise during the hydrogenation of acetylene. Here, we demonstrate that control of the catalyst structure increases the yield and productivity of these important olefins with a family of catalyst materials comprising Cu nanoparticles (CuNPs) bound within the pores of Zr-based metal–organic frameworks. Using carbon monoxide as a probe molecule, we characterize the surfaces of these catalytic CuNPs with diffuse reflectance infrared Fourier transform spectroscopy, revealing that the electronic structure of the CuNP surfaces is size-dependent. Furthermore, we find that as the CuNP diameter decreases, the selectivity for C 4 products increases and that lowering the stoichiometric ratio of H 2 /acetylene improves the selectivity and productivity of the catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Carbon Deposition on the Oxidation Rate of Copper/Bentonite in the Chemical Looping Process

The presented work is part of the Industrial Carbon Management Initiative (ICMI) on the development of metal oxide oxygen carriers for use in the chemical looping combustion process. An oxygen carrier, CuO/bentonite (60:40%), was reacted with methane gas and then oxidized in air. The change in weight and reaction gas concentrations were measured using a thermogravimetric analyzer (TGA) equipped with a real-time gas analyzer. The reduction–oxidation cycle was conducted within the temperature range of 750–900 °C for 10 cycles, using 20, 50, and100% CH{sub 4} concentrations in N{sub 2} for the reduction segment and dry air for the oxidation segment. Several analysis methods were evaluated to fit the oxidation of reduced CuO (i.e., Cu) data over the complete conversion range with suitable rate expressions derived from existing models for oxidation, including the shrinking core model (diffusion and reaction control), first- and second-order reaction rates, parallel and series reaction mechanisms, and Johnson–Mehl–Avrami (JMA) rate. The best agreement between the experimental data and the models of the Cu oxidation was accomplished using the JMA model. The reactivity of the oxygen carrier during the oxidation reactions was affected by the CH{sub 4} concentration as well as the temperature. The rate of fractional uptake of oxygen onto the carrier decreased as the temperature increased, contrary to expectations and indicative that the mechanism is changing during the test. Analysis of the exit gas provided evidence of carbon deposition on the reduced sorbent particle and resulted in the CO{sub 2} product upon oxidation. The oxidation of this carbon releases significant heat that is capable of changing the particle morphology (Zhu, Y.; Mimura, K.; Isshiki, M. Oxid. Met. 2004, 62, 207-222). On the basis of experimental results, the overall reaction process in the fuel reactor may be considered to consist of the decomposition of CH{sub 4} into C and H{sub 2} and reduction of CuO/bentonite by the resulting H{sub 2} and the parallel reaction of CH{sub 4} with CuO/bentonite. The extent of carbon deposition in the carrier particle increased with an increasing temperature and CH{sub 4} concentration. This deposited carbon not only leads to CO{sub 2} release from the oxidation reactor but, more importantly, causes degredation of the carrier capacity and its reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗