Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Physics and material science of ultra-high quality factor superconducting resonator

The nitrogen doping into niobium superconducting radio frequency cavity walls aiming to improve the fundamental mode quality factor is the subject of the research in the given work. Quantitative nitrogen diffusion into niobium model calculating the concentration profile was developed. The model estimations were confirmed with secondary ion mass spectrometry technique measurements. The model made controlled nitrogen doping recipe optimization possible. As a result the robust reproducible recipe for SRF cavity walls treatment with nitrogen doping was developed. The cavities produced with optimized recipe met LCLS–II requirements on quality factor of 2.7 ∙ 10 10 at acceleration field of 16 MV/m. The microscopic effects of nitrogen doping on superconducting niobium properties were studied with low energy muon spin rotation technique and magnetometer measurements. No significant effect of nitrogen on the following features was found: electron mean free path, magnetic field penetration depth, and upper and surface critical magnetic fields. It was detected that for nitrogen doped niobium samples magnetic flux starts to penetrate inside the superconductor at lower external magnetic field value compared to the low temperature baked niobium ones. This explains lower quench field of SRF cavities treated with nitrogen. Quality factor improvement of fundamental mode forced to analyze the high order mode (HOM) impact on the particle beam dynamics. Both resonant and cumulative effects caused by monopole and dipole HOMs respectively are found to be negligible within the requirements for LCLS–II.

36 MATERIALS SCIENCE↗

Quantitative Measurement of Li-Ion Concentration and Diffusivity in Solid-State Electrolyte

Here, we present a quantitative method to measure the concentration and diffusivity of Li ion in a solid-state electrolyte with nanoscale depth resolution. We designed a standard sample with different depths of trenches and used time-of-flight secondary ion mass spectroscopy, inductively coupled plasma optical emission spectroscopy, three-dimensional (3D) optical microscopy, and electrochemical strain microscopy to obtain effective Li-ion concentration and the corresponding diffusivity as a function of depth. As a result, we verified the dependence of electromechanical strain induced by ionic oscillation on mobile-ion concentration. We also showed the diffusivity change as a function of effective concentration and discussed the difference in diffusivity near the surface and inside the bulk. Our method can be widely used for electromechanical strain in various ionic conductors, rendering our technique universal for quantitative analysis of ionic dynamics at a multiscale.

36 MATERIALS SCIENCE↗

Kaon Femtoscopy with Lévy-Stable Sources from $\sqrt{s_{NN}}$ = 200 GeV Au+Au Collisions at RHIC

Femtoscopy has the capacity to probe the space-time geometry of the particle-emitting source in heavy-ion collisions. In particular, femtoscopy of like-sign kaon pairs may shed light on the origin of non-Gaussianity of the spatial emission probability density. The momentum correlations between like-sign kaon pairs are measured in data recorded by the STAR experiment, from $\sqrt{s_{NN}}$ = 200 GeV Au+Au collisions at RHIC, BNL. Preliminary results hint at the possible existence of non-Gaussian, Lévy-stable sources, with the likely presence of an anomalous diffusion process in the signal for the identically charged kaon pairs so produced. More statistically significant studies at lower centre-of-mass energies may contribute to the search for the critical end point of QCD.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simulation of sharp interface multi-material flows involving an arbitrary number of components through an extended five-equation model

In this paper, we present an anti-diffusive method dedicated to the simulation of interface flows on Cartesian grids involving an arbitrary number m of compressible components. Our work is two-fold: first, we introduce a m-component flow model that generalizes a classic two material five-equation model. In that way, interfaces are localized using color function discontinuities and a pressure equilibrium closure law is used to complete this new model. The resulting model is demonstrated to be hyperbolic under simple assumptions and consistent. Second, we present a discretization strategy for this model relying on a Lagrange–Remap scheme. Here, the projection step involves an anti-dissipative mechanism allowing to prevent numerical diffusion of the material interfaces. The proposed solver is built ensuring consistency and stability properties but also that the sum of the color functions remains equal to one. The resulting scheme is first order accurate and conservative for the mass, momentum, energy and partial masses. Furthermore, the obtained discretization preserves Riemann invariants like pressure and velocity at the interfaces. Finally, validation computations of this numerical method are performed on several tests in one and two dimensions. The accuracy of the method is also compared to results obtained with the upwind Lagrange–Remap scheme.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combined Experimental and Modeling Study of the Interactions of Acid Gas with Common Spacecraft Surfaces for Fire Safety Applications

A fire in a spacecraft poses detrimental consequences and risks mission success in addition to crew safety. This is compounded during long-duration missions when the crew has limited options to recover from a fire. A common spacecraft fire concern is the smoldering of wire insulation, typically made from Polyvinyl chloride (PVC) or Polytetrafluoroethylene (PTFE). This creates acid gases such as Hydrogen Chloride (HCl), Hydrogen Fluoride (HF) and Hydrogen Cyanide (HCN). These poisonous gases are hazardous to the crew. They also interact with common surfaces within the spacecraft more than dominant combustion products such as CO2 and H2O. This makes them more difficult to track for potential fire detection techniques, or for postfire clean-up. It is imperative to be able to understand and predict the fate of these poisonous species in a microgravity environment in order to design a safe vehicle. HCl interacts with a number of materials inside a spacecraft. Primary among these materials is aluminum, which is abundantly used due to its strong and light weight nature. Aluminum has a natural oxide layer that protects it from corrosion but is typically treated to enhance this oxide layer. Among these treatments is a chromate conversion coating (CCC), which provides a thin enough protective oxide layer to still conduct electricity, and a traditional anodized material that has a thicker oxide layer that does not conduct electricity. Nomex is another common material found inside a spacecraft. It is a flame-resistant woven polymer that is related to nylon. This commercially available material is used for cargo storage bags and as a fire barrier. Physics-based models were developed to predict the uptake of HCl by these materials. The ultimate objective of these models is to predict the fate of HCl within the spacecraft so that sensors can be placed in meaningful locations in future missions based on the model predictions. To support these modeling efforts, experiments were performed in a cast acrylic test cell that measured the difference between the inlet and outlet concentration of HCl after inserting a sample rod of the test material. Different uptake capacities were realized for each type of sample tested. A computational fluid dynamics model (CFD) model of the reactor was then constructed that used a one-step global reaction rate with calibratable reaction (or kinetic) constants. These constants were calibrated to match the HCl uptake on the CCC aluminum samples, and the same kinetic constants were then tested for the stock and anodized aluminum samples. Model predictions matched the experimental data for the stock aluminum, and to a much lesser extent, the anodized aluminum. The model was additionally validated at different flow rates, sample surface areas, and inlet concentrations, and showed good agreement for all stock and CCC samples. The model did not accurately predict the HCl uptake in the anodized samples compared to the other two types of aluminum. Adjusting the kinetic constants and transport properties did little to improve the prediction. X-Ray Photoelectron Spectroscopy (XPS) was used to determine that the oxide layer thickness of anodized aluminum is approximately 5,000 nm, compared to 250 nm for CCC and 50 nm for stock. XPS also revealed presence of chlorine further down in the aluminum oxide layer in anodized samples than CCC and stock samples after the samples were saturated with HCl, indicating that accounting for diffusion of HCl into the oxide layer is important for accurate prediction of HCl uptake onto anodized aluminum. Consequently, a multi-scale model was developed and tested. First, a single pore inside the anodized aluminum oxide layer was modeled and is referred to as the pore-scale model. In this model, HCl diffused through the pore and reacted with the aluminum oxide pore wall to create aluminum chloride. The sample was then saturated when the mass transfer resistance through the growing aluminum chloride layer became too large for the HCl to reach the aluminum oxide wall and continue the reaction. This pore-scale model was coupled to the reactor-scale model using a concentration-dependent diffusion coefficient, resulting in much more accurate predictions (approximately half the sum square error of the aforementioned reactor-scale model that produced good agreement for stock and CCC) for a variety of operating conditions. The amount of water vapor or relative humidity (RH) in the flow during a reactor experiment was determined to influence HCl uptake. Experiments were performed to understand the interaction of gaseous HCl with aluminum surfaces in the presence of water vapor. The results show that increasing levels of RH increased the capacity of aluminum to adsorb HCl but decreased the capacity of Nomex to uptake HCl. A series of tests were performed on individual aluminum samples after they had been saturated with a fixed concentration of HCl in dry air conditions with the goal of determining how their HCl uptake capacity changes after various treatments with water relative to the original saturation tests. HCl-saturated aluminum samples subjected to a second dry air flow at the same HCl concentration as the original test had an uptake of 23.5% of the original sample with no treatment in between. Saturated aluminum samples subjected to an air flow with a RH of 90% in between tests had an uptake of 35.6% of the original. Saturated aluminum samples submerged in distilled water for 12 hours in between tests had an uptake of 82.2% of the original sample. Previously saturated aluminum tested with HCl and a 50% RH air flow resulted in similar uptake characteristics in multiple repeated tests. The experiments show the profound effect water vapor has on HCl uptake onto aluminum surfaces. In the samples subjected to water vapor or liquid water, capillary condensation and capillary diffusion alters the transport of HCl significantly. A model was proposed that developed a relationship between RH and the coefficient of HCl diffusion in aluminum chloride. This produced an “S-shaped” curve with diffusion coefficient as a function of RH, with 45% RH represented as the point where the diffusion coefficient is halfway between no water saturation and 100% water saturation in the aluminum chloride product layer. No difference in uptake characteristics for the experiment or model were realized between 50% and 62% RH. The results from the large-scale microgravity experiment, Saffire, are discussed as they pertain to the fate of HCl throughout a spacecraft. HCl was released, both as a standalone event, and in concurrence with the burning of a structured cloth. These events only produced a small response in the far field HCl sensor, while a PMMA burn that did not produce HCl had a significantly greater response. A ground-based large-scale facility was constructed to flow acid gas at the scale and configuration realized in the Saffire experiments. A CFD model of this duct was constructed to test kinetic parameters developed in this work at a larger scale and different geometric configuration and to predict the results of the large-scale facility. The models developed in this work were used to interpret the results of the microgravity tests and lead the discussion on what further experiments and models are needed in order to predict the fate of acid gas in a spacecraft environment. To summarize, the major contributions of this work are as follows: the capacity to uptake HCl, with and without the presence of water vapor, was measured for a variety of real spacecraft surfaces. Several different models (single reactor-scale, multiscale, spacecraft-scale) were developed and with the aid of modeling, the rate of uptake for those surfaces was also predicted and validated. The kinetic parameters determined from the small-scale reactor experiments and models were used to predict large-scale and microgravity tests. Conclusions from this research will be used in the design of spacecraft vehicles and large-scale microgravity fire safety experiments. The models built by this work will aid designers in sensor placement and could be used to predict acid gas transport from fires in partial gravity, as would be seen in Lunar and Martian habitats.

fire safety↗

All-Atom Molecular Dynamics Simulations of the Temperature Response of Densely Grafted Polyelectrolyte Brushes

Water acts a “good” solvent for most polyelectrolyte (PE) systems due to its high dielectric strength. Theoretical and experimental studies have highlighted some remarkably unconventional properties of strongly water-swollen PE brushes such as a reduction in brush height with increase in temperature. However, an understanding of the atomistic-scale response of the grafted PE chains as well as the local arrangement and organization of the brush-supported counterions and water molecules to changes in temperature is missing. Here, we conduct an all-atom molecular dynamics (MD) study to probe the influence of temperature on the “microstructure” of densely grafted, fully ionized polyacrylic acid (PAA) brushes. The atomistic insights obtained from our study shed light on prior experimental observations and elucidate the key role played by changes in hydrogen bonding network in dictating the hydrophilicity of the brushes. In addition to the temperature-mediated reduction in height of the PE brush layer, we study the influence of temperature on several properties of the brush-supported water molecules such as the number distribution and kinetics of water-water and water-PE hydrogen bonds (HBs), mass density, orientational tetrahedral order parameter, and the activation energy associated with the self-diffusion of water. The effect of temperature on the properties of the brush-trapped counterions is also quantified via changes in their solvation structure, counterion-water radial distribution function (RDF), and the translational mobility. Our findings unravel several hitherto unknown phenomena such as the enhanced propensity for attaining PE brush-induced “water-in-salt”-like scenarios at elevated temperatures, and an increase in the activation energy for the self-diffusion of water with increase in the degree of PE brush-induced nanoconfinement (from ‘bulk water’ to ‘sparsely grafted PE brushes’ to ‘densely grafted PE brushes’). Further, we anticipate that this work will be helpful in improving our predictive capabilities of the temperature response of water-swollen PE brushes, which would be instrumental for better design of several PE brush systems used in a multitude of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DISK FORMATION ENABLED BY ENHANCED RESISTIVITY

Disk formation in magnetized cloud cores is hindered by magnetic braking. Previous work has shown that for realistic levels of core magnetization, the magnetic field suppresses the formation of rotationally supported disks during the protostellar mass accretion phase of low-mass star formation both in the ideal MHD limit and in the presence of ambipolar diffusion for typical rates of cosmic-ray ionization. Additional effects, such as ohmic dissipation, the Hall effect, and protostellar outflow, are needed to weaken the magnetic braking and enable the formation of persistent, rotationally supported, protostellar disks. In this paper, we first demonstrate that the classic microscopic resistivity is not large enough to enable disk formation by itself. We then experiment with a set of enhanced values for the resistivity in the range {eta} = 10{sup 17}-10{sup 22} cm{sup 2} s{sup -1}. We find that a value of order 10{sup 19} cm{sup 2} s{sup -1} is needed to enable the formation of a 10{sup 2} AU scale Keplerian disk; the value depends somewhat on the degree of core magnetization. The required resistivity is a few orders of magnitude larger than the classic microscopic values. Whether it can be achieved naturally during protostellar collapse remains to be determined.

79 ASTRONOMY AND ASTROPHYSICS↗

B- AND A-TYPE STARS IN THE TAURUS-AURIGA STAR-FORMING REGION

We describe the results of a search for early-type stars associated with the Taurus-Auriga molecular cloud complex, a diffuse nearby star-forming region noted as lacking young stars of intermediate and high mass. We investigate several sets of possible O, B, and early A spectral class members. The first is a group of stars for which mid-infrared images show bright nebulae, all of which can be associated with stars of spectral-type B. The second group consists of early-type stars compiled from (1) literature listings in SIMBAD, (2) B stars with infrared excesses selected from the Spitzer Space Telescope survey of the Taurus cloud, (3) magnitude- and color-selected point sources from the Two Micron All Sky Survey, and (4) spectroscopically identified early-type stars from the Sloan Digital Sky Survey coverage of the Taurus region. We evaluated stars for membership in the Taurus-Auriga star formation region based on criteria involving: spectroscopic and parallactic distances, proper motions and radial velocities, and infrared excesses or line emission indicative of stellar youth. For selected objects, we also model the scattered and emitted radiation from reflection nebulosity and compare the results with the observed spectral energy distributions to further test the plausibility of physical association of the B stars with the Taurus cloud. This investigation newly identifies as probable Taurus members three B-type stars: HR 1445 (HD 28929), {tau} Tau (HD 29763), 72 Tau (HD 28149), and two A-type stars: HD 31305 and HD 26212, thus doubling the number of stars A5 or earlier associated with the Taurus clouds. Several additional early-type sources including HD 29659 and HD 283815 meet some, but not all, of the membership criteria and therefore are plausible, though not secure, members.

79 ASTRONOMY AND ASTROPHYSICS↗

HST images flash ionization of old ejecta by the 2011 eruption of recurrent Nova T PYXIDIS

T Pyxidis is the only recurrent nova known to be surrounded by knots of material ejected in previous outbursts. Following the eruption that began on 2011 April 14.29, we obtained seven epochs (from 4 to 383 days after eruption) of Hubble Space Telescope narrowband Hα images of T Pyx. The ionizing flash of radiation from the nova event had no discernible effect on the surrounding ejecta until at least 55 days after the eruption began. Photoionization of hydrogen located north and south of the central star was seen 132 days after the beginning of the eruption. That photoionized hydrogen recombined in the following 51 days, allowing us to determine a hydrogen atom density of at least 7×10{sup 5} cm{sup −3}—at least an order of magnitude denser than the previously detected, unresolved [N ii] knots surrounding T Pyx. Material to the northwest and southeast was photoionized, and became bright between 132 and 183 days after the eruption began. Ninety-nine days later that northwest and southeast hydrogen had recombined. Both then (282 days after outburst) and 101 days later, we detected almost no trace of hydrogen emission around T Pyx. We determine that there is a large reservoir of previously unseen, cold diffuse hydrogen overlapping the previously detected, [N ii]-emitting knots of T Pyx ejecta. The mass of this newly detected hydrogen is model-dependent, but is is probably an order of magnitude larger than that of the [N ii] knots. We also determine that there is no significant reservoir of undetected hydrogen-rich ejecta, with density comparable to the flash-ionized ejecta we have detected, from the outer boundaries of the previously detected ejecta out to about twice that distance. The lack of distant ejecta is consistent with the Schaefer et al. scenario for T Pyx, in which the star underwent its first eruption within five years of 1866 after many millennia of quiescence, followed by the six observed recurrent nova eruptions since 1890. The lack of distant ejecta, demonstrated by our observations, is not consistent with scenarios in which T Pyx has been erupting continuously as a recurrent nova for many centuries or millennia.

79 ASTRONOMY AND ASTROPHYSICS↗

CHAMP cosmic rays

In this work, we study interactions of cosmological relics, $X$, of mass $m$ and electric charge $qe$ in the galaxy, including thermalization with the interstellar medium, diffusion through inhomogeneous magnetic fields and Fermi acceleration by supernova shock waves. We find that for $m \mathop{}_{\textstyle \sim}^{\textstyle <} 10^{10} q \; ~{\rm GeV}$, there is a large flux of accelerated $X$ in the disk today, with a momentum distribution $\propto 1/p^{2.5}$ extending to $(\beta p)_{max} \sim 5 \times10^4 q \; ~{\rm GeV}$. Even though acceleration in supernova shocks is efficient, ejecting $X$ from the galaxy, $X$ are continually replenished by diffusion into the disk from the halo or confinement region. For $m \mathop{}_{\textstyle \sim}^{\textstyle >} 10^{10} q \; ~{\rm GeV}$, $X$ cannot be accelerated above the escape velocity within the lifetime of the shock. The accelerated $X$ form a component of cosmic rays that can easily reach underground detectors, as well as deposit energies above thresholds, enhancing signals in various experiments. Additionally, we find that nuclear/electron recoil experiments place very stringent bounds on $X$ at low $q$; for example, $X$ as dark matter is excluded for $q$ above $10^{-9}$ for any $m$. For larger $q$, stringent bounds on the fraction of dark matter that can be $X$ are set by Cherenkov and ionization detectors. Nevertheless, very small $q$ is highly motivated by the kinetic mixing portal, and we identify regions of $(m,q)$ that can be probed by future experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Deuterium Permeation Through a Self-Supported Palladium-Silver Membrane in Helium Gas Mixtures

Palladium membranes and membrane reactors can separate and purify tritium from impurities in the plasma exhaust processing system for the fusion energy fuel cycle. Membranes can also act as a continuous separation method to remove tritium from helium streams in the breeder blanket tritium extraction system, such as from the purge gas of solid breeders. To investigate the potential of these membranes for these applications, we performed a deuterium permeation campaign with a self-supported palladium-silver (Pd-25Ag wt%) tube of 0.15 m length, 76 µ m wall thickness, and 3.0 mm inner diameter. A gas mixture of 3.95% D 2 and a balance of He was delivered to the inside of the tube and D permeated radially outwards through the membrane into a vacuum chamber. Permeation experiments were conducted at 300 ° C, 350 ° C, 400° C, and 450°C, from 100 to 1000 sccm total flow rate, and with total pressures of 90, 150, 190, and 250 kPa. Further, deuterium permeation was consistently lower than predicted from diffusion-limited permeation models, thus we developed a transport model that included gas-phase mass transfer and surface reactions to model experimental results. The dissociation constant was optimized to fit the developed model to experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Texture Evolution in U-10Mo Nuclear Fuel Foils during Plasma Spray Coating with Zr

A uranium-molybdenum alloy clad in 6061 aluminum has the potential to lead to a wide application of low-enriched uranium fuels, replacing highly enriched uranium for research reactors. A Zr coating acts as a diffusion barrier between the fuel and the aluminum cladding. In this study, U-10Mo (mass %) was coated with Zr using a plasma spray technique recognized as a fast and economical coating method. Neutron time-of-flight diffraction was used to study the microstructure evolution by quantifying the phase fractions of involved phases as well as the texture evolution of U-10Mo and Zr during plasma spray coating with Zr. Quantitative texture analysis revealed that the texture was drastically changed for high coating temperatures, likely due to selective grain growth. Furthermore, the Zr coating showed a preferential orientation, which could be correlated with the initial texture of the uncoated U-10Mo. This could be explained by the epitaxial growth of the Zr on the U-10Mo substrate.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SDSS-IV MaNGA: The MaNGA Dwarf Galaxy Sample Presentation

We present the MaNGA Dwarf galaxy (MaNDala) Value Added Catalog (VAC), from the final release of the Sloan Digital Sky Survey-IV program. MaNDala consists of 136 randomly selected bright dwarf galaxies with M * < 10 9.1 M ⊙ and M g > -18.5, making it the largest integral field spectroscopy homogeneous sample of dwarf galaxies. We release a photometric analysis of the g, r, and z broadband imaging based on the DESI Legacy Imaging Surveys, as well as a spectroscopic analysis based on the Pipe3D SDSS-IV VAC. Our release includes the surface brightness (SB), geometric parameters, and color profiles, Sérsic fits as well as stellar population properties (such as stellar ages, metallicities, and star formation histories), and emission lines' fluxes within the FOV and the effective radii of the galaxies. We find that the majority of the MaNDala galaxies are star-forming late-type galaxies with $\langle$n Sersic,r $\rangle$ ~ 1.6 that are centrals (central/satellite dichotomy). MaNDala covers a large range of SB values (we find 11 candidate ultra-diffuse galaxies and three compact ones), filling the gap between classical dwarfs and low-mass galaxies in the Kormendy Diagram and in the size–mass/luminosity relation, which seems to flatten at 10 8 < M * /M ⊙ < 10 9 with $\langle$R e,r $\rangle$ ~ 2.7 kpc. A large fraction of MaNDala galaxies formed from an early low-metallicity burst of SF, but also from late SF events from more metal-enriched gas: half of the MaNDala galaxies assembled 50% of their mass at $\langle$z$\rangle$ > 2, while the last 20% was at $\langle$z$\rangle$ < 0.3. Finally, a bending of the sSFR-M * relation at M * ~ 10 9 M ⊙ for the main-sequence galaxies seems to be supported by MaNDala.

79 ASTRONOMY AND ASTROPHYSICS↗

Surface composition of magnetic neutron stars.

The relative abundances of seven constituent nuclei, He4, C12, O16, Ne20, Mg24, Si28, and Fe56, are calculated as a function of time for neutron star atmospheres within which exist magnetic fields of the order of 10 to the 13th G. The opacity, equation of state of the electrons, and cooling rate of the magnetic star are discussed, and it is shown to be a reasonable approximation to assume an atmosphere to be isothermal. The effects of particle diffusion are included in the nuclear reaction network. Computations are performed both for a constant mass atmosphere and for an atmosphere in which mass is being ejected. It is found that the final abundances are model-independent, as long as the initial model contains predominantly He4. The relative abundances are compared to the cosmic ray spectrum. For both the constant-mass and mass-loss atmospheres, nucleosynthesis proceeds virtually completely to Fe56. However the outermost layers of the envelope, in which no mass is being ejected, are composed almost entirely of He4 with trace amounts of Fe56. After the loss of about 10 to the 21st g, only Fe56 is ejected from atmospheres expelling mass.

Rosen, L. C.↗

Cold-air performance of the compressor-drive turbine of the Department of Energy baseline automobile gas-turbine engine

The aerodynamic performance of the compressor-drive turbine of the DOE baseline gas-turbine engine was determined over a range of pressure ratios and speeds. In addition, static pressures were measured in the diffusing transition duct located immediately downstream of the turbine. Results are presented in terms of mass flow, torque, specific work, and efficiency for the turbine and in terms of pressure recovery and effectiveness for the transition duct.

Roelke, R. J.↗

Possible origins of time variability in Jupiter's outer magnetosphere. III - Variations in the heavy ion plasma

The implications of a heavy ion plasma in the Jovian magnetosphere are discussed. The plasma electron density varies on time scales comparable with that of radial diffusion. This plasma can enhance a super-Alfvenic planetary wind by increasing the radial mass flux. A mechanism by which the heavy ion plasma can regenerate itself via self-sputtering from the surface of Io followed by ionization first by solar ultra-violet and later by electron impact is proposed. It is suggested that this long term variability can modulate the faster variations of the plasma-magnetosphere configuration of Jupiter.

Eviatar, A.↗

Plasma dynamics in the rapidly rotating magnetosphere of Jupiter

The major Voyager findings concerning the low energy plasma in the Jovian magnetosphere are reviewed. The magnetosphere of Jupiter is unique in the solar system because of its large extent and rapid rotation, and because of the prodigious source of plasma provided by the satellite Io. Io injects 10 to the 29th power AMU/sec of freshly ionized material into the Jovian magnetosphere, producing a plasma dominated by heavy ions which are mostly various ionization states of oxygen and sulfur. This injected material is the source for the Io plasma torus, which is centered at Io's L-shell with a scale height of 1 Jovian radii and a mass of approximately 10 to the 36th power AMU. Ninety percent of the injected plasma diffuses outward, forming the Jovian magnetodisk. Io interacts with the plasma torus via the generation of an Alfven wave which propagates from Io into the ionosphere of Jupiter, carrying an energy flux of approximately 10 to the 12th power watts.

Belcher, J. W.↗

Molecular-beam sampling study of extinguishment of methane-air flames by dry chemicals

The use of Al2O3, NaHCO3, KHCO3, NH4H2PO4 and KCl powders for the inhibition of a methane/oxygen diffusion flame is studied through measurement of composition and temperature profiles, using a molecular beam mass spectrometer sampling system. In order to obtain significant inhibition without extinguishing the flame, a powder feeding rate of 2 mg/liter of gas was used for KCl and Al2O3, and of 3 mg/liter of gas for the remaining powders. CH4, O2, N2, H2O and CO2 concentrations were measured by the mass spectrometer, while temperature was measured by the time-of-flight technique. For the powder feeding rates used, Al2O3 was the least and KCl and NH2H4PO2 the most effective in reducing temperature; in reaction-inhibition effectiveness, Al2O3 was again lowest while KCl was superior to all others. Because the KCl concentration was only 2/3 that of NH4H2PO4, it is recommended as the most effective temperature reducer and reaction inhibitor.

Knuth, E. L.↗