Search NASA⌕ Search

SEARCH · Search NASA

Results for “materials processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Corrosion Behavior of AZ31 Magnesium Alloy Produced by Continuous Variable Cross Section Direct Extrusion

In order to study the corrosion behavior of magnesium alloys of high performance in the simulated seawater by continuous variable cross section direct extrusion (CVCDE), an electrochemical method and weight loss method were used to study the difference between AZ31 magnesium alloys produced by CVCDE with different numbers of interim dies to examine the electrochemical corrosion behavior and corrosion rate at 3.5 wt.% NaCl solution in this paper. Scanning electron microscopy and x-ray diffraction were used to analyze the morphology of corrosion surfaces and the composition of the corrosion products of samples soaked for different times. The results show that after CVCDE with different numbers of interim dies, the size of the microstructure is refined gradually, and the grain orientation is also different; with the increase in the number of interim dies, the thermodynamic corrosion tendencies are different, and the corrosion resistance of samples extruded by conventional extrusion is relatively good; the charge transfer and material transfer process are the two main factors affecting the corrosion rate, which determines the direction of the electrochemical reaction; the corrosion form of the sample extruded by CVCDE is the local corrosion which is the filiform corrosion and pitting corrosion, and the corrosion product is mainly water-insoluble Mg(OH){sub 2}.

36 MATERIALS SCIENCE↗

Manual Torque Data Study

At the Pantex Plant in Amarillo, TX, Production Technicians (PTs) build and disassemble nuclear weapon systems. The weapons are held in an integrated work stand for stability and to increase the safety environment for the workers and for the materials being processed. There are many occasions in which a knob must be turned to tighten an assembly part. This can help to secure or manipulate pieces of the system. As there are so many knobs to turn, the instructions given to the PTs are to twist the knob to a hand-tight setting, without the aid of a torque wrench. There are inherent risks in this procedure as the knobs can be tightened too loosely such that the apparatus falls apart or too tightly such that the force can crush or pinch components in the system that contain energetic materials. We want to study these operations at Pantex. Our goal is to collect torque data to assess the safety and reliability of humantooling interfaces.

42 ENGINEERING↗

Creep Analysis of Poly(ester urethane) Copolymer by Dynamic Mechanical Analysis (DMA): Melt Determination

An experiment is presented utilizing film tension, creep test dynamic mechanical analysis (DMA) to characterize the physical properties of a poly(ester urethane) block copolymer, Estane ® 5703. The polymer was pressed into a sheet from pellet form and cut into strips for analysis utilizing the TA Q800 DMA with film tension clamp. The strips were tested under five constant stress analyses from 0.125 to 0.625, at 0.125 MPa increments. Each analysis was run stepwise through a temperature gradient from 25 °C to 67 .5 °C with 2.5 °C increments, the material reached the instrument maximum displacement at different temperature steps dependent on the constant applied stress. At each of the 18 temperature steps the material was held at constant stress for 10 minutes and allowed to recover under stress-less conditions for 20 minutes. With data analysis recoverable strain data was produced and ultimately a curve of Modulus at temperature, the regression extrapolated to modulus = 0 M Pa. The extrapolated point correlated with data the weighted average melt point of the polymer measured by MDSC, within the regressive least squares fit of the measured moduli. Thereby measuring the melt temperature of a polymer by DMA. This is the third in a series of three reports 4,5 on the physical properties and degradation processes of materials used in polymer bonded explosive 9501 written for submission to the University of Oregon, Masters Industrial Internship Program.

36 MATERIALS SCIENCE↗

Strategies to Valorize the Hydrothermal Liquefaction-Derived Aqueous Phase into Fuels and Chemicals

Valorization options for the aqueous fraction produced by the hydrothermal liquefaction of terrestrial feedstocks were developed. The processes focused on carboxylic acids, which are abundant in the aqueous fraction. A clean up process for the aqueous phase based on activated carbon absorption followed by liquid-liquid extraction was demonstrated that significantly reduces color bodies and inorganic contaminants while simultaneously concentrating desirable organic constituents. Conversion of the cleaned aqueous phase was then demonstrated for both a ketonization reaction and steam reforming. Condensed phase ketonization over LaxZryOz catalyst was found to exhibit both excellent hydrothermal stability and ketonization activity. Necessity for feedstock cleanup was established and stable condensed phase ketonization operation was demonstrated for ~100 hours with HTL-process derived material. Steam reforming was also demonstrated by employing a dual-bed catalyst configuration whereby carboxylic acids first undergo ketonization over CeO2 in the vapor phase followed by steam reforming of the ketone intermediates over Co/CeO2. The dual-bed approach reduced coke deposition and thus catalyst stability improved. Techno-economic analysis was used to assess economic viability for producing fuel from the bio-oil fraction and either propene (formed via hydrogenation and dehydration of acetone, the primary ketonization product) or hydrogen from the aqueous stream. The ketonization and steam reforming cases were separately modeled and benchmarked to a process utilizing anaerobic digestion. Resulting minimum fuel selling prices of $3.7, $4.2, and $4.3/GGE were obtained for the production of olefins via ketonization, reduction and dehydration; steam reforming; and anaerobic digestion processes, respectively. Both the steam reforming and anaerobic digestion processes benefited by avoiding the need for natural gas by producing the hydrogen on-site required for biocrude hydrotreatment. However, the condensed ketonization process had the lowest minimum fuel selling price because of the co-product olefins generated for sale.

Biomass, hydrothermal liquefaction, techno economi↗

A Stochastic Reduced-Order Model for Statistical Microstructure Descriptors Evolution

Integrated computational materials engineering (ICME) models have been a crucial building block for modern materials development, relieving heavy reliance on experiments and significantly accelerating the materials design process. However, ICME models are also computationally expensive, particularly with respect to time integration for dynamics, which hinders the ability to study statistical ensembles and thermodynamic properties of large systems for long time scales. To alleviate the computational bottleneck, we propose to model the evolution of statistical microstructure descriptors as a continuous-time stochastic process using a non-linear Langevin equation, where the probability density function (PDF) of the statistical microstructure descriptors, which are also the quantities of interests (QoIs), is modeled by the Fokker–Planck equation. In this work, we discuss how to calibrate the drift and diffusion terms of the Fokker–Planck equation from the theoretical and computational perspectives. The calibrated Fokker–Planck equation can be used as a stochastic reduced-order model to simulate the microstructure evolution of statistical microstructure descriptors PDF. Considering statistical microstructure descriptors in the microstructure evolution as QoIs, we demonstrate our proposed methodology in three integrated computational materials engineering (ICME) models: kinetic Monte Carlo, phase field, and molecular dynamics simulations.

97 MATHEMATICS AND COMPUTING↗

Nanomorphology of eco-friendly colloidal inks, relating non-fullerene acceptor surface energy to structure formation

Nanoengineered, eco-friendly, solution-processable electroactive materials are in demand for the growing field of printed electronics, and these material requirements can be achieved by the development of waterborne colloidal dispersions. Functionality in these composite materials can be tuned by thermodynamically modifying the material nanomorphology, often by creation of kinetically stabilized aqueous nanoparticle dispersions. In this work we demonstrate that the internal structure of organic nanoparticles is controlled by the surface energy difference between the polymeric donor material and the non-fullerene acceptor (NFA) material. Nanoparticles of the following donor–acceptor combinations, suitable for printed organic photovoltaics, have been synthesized: TQ1:N2200, TQ1:PNDIT10, P3HT:N2200, P3HT:o-IDTBR and P3HT:eh-IDTBR. Advanced synchrotron-based X-ray spectroscopy and microscopy are used to correlate the formation of core–shell nanoparticle morphology to the material surface energy. We subsequently present a viable avenue for customizing the blended nanoparticle structure into (i) core–shell, (ii) molecularly intermixed, or (iii) inverted shell–core structures. Our results showed that TQ1:PNDIT10 and P3HT:o-IDTBR nanoparticles were comprised of a donor-rich shell and an NFA-rich core, however, interestingly we show a reversal to the inverse NFA shell/donor core structure for TQ1:N2200, P3HT:N2200 and P3HT:eh-IDTBR nanoparticles, driven by the low surface energy of N2200 (23.7 mJ m –2 ) and eh-IDTBR (18.3 mJ m –2 ). This article is the first report of a flipped nanoparticle core–shell morphology comprising an NFA-rich shell for the miniemulsion synthesis route. The composition of the shells and cores was able to be controlled by the differential mismatch in the surface energy of the donor and acceptor materials, with ΔG surface > 0, ΔG surface = 0, and ΔG surface < 0 for acceptor core–donor shell, molecularly intermixed, and acceptor shell–donor core, respectively. Accordingly, we introduce an entirely overlooked new figure of merit (FoM) for customizing nanoparticulate colloidal inks: tunable surface energy of non-fullerene-based semiconductors. Finally, the establishment of this FoM opens up electroactive material design to a wide range of functional printing applications with varying device and ink structure requirements, thereby reshaping the nanoengineering toolkit for waterborne colloidal dispersions and hence printed electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From Design to Device: Challenges and Opportunities in Computational Discovery of p -Type Transparent Conductors

A high-performance p -type transparent conductor (TC) does not yet exist but could lead to advances in a wide range of optoelectronic applications and enable new architectures for, e.g., next-generation photovoltaic (PV) devices. High-throughput computational material screenings have been a promising approach to filter databases and identify new p -type TC candidates and some of these predictions have been experimentally validated. However, most of these predicted candidates do not have experimentally achieved properties on par with n -type TCs used in solar cells and therefore have not yet been used in commercial devices. Thus, there is still a significant divide between transforming predictions into results that are actually achievable in the laboratory and an even greater lag in scaling predicted materials into functional devices. In this perspective, we outline some of the major disconnects in this materials discovery process—from scaling computational predictions into synthesizable crystals and thin films in the laboratory to scaling laboratory-grown films into real-world solar devices—and share insights to inform future strategies for TC discovery and design. Published by the American Physical Society 2024

14 SOLAR ENERGY↗

Enhancing superconducting critical current by randomness

The key ingredient of high critical currents in a type-II superconductor is defect sites that pin vortices. Here, we demonstrate that a random pinscape, an overlooked pinning system in nanopatterned superconductors, can lead to a substantially larger critical current enhancement at high magnetic fields than an ordered array of vortex pin sites. We reveal that the better performance of a random pinscape is due to the variation of the local density of its pinning sites, which mitigates the motion of vortices. This is confirmed by achieving even higher enhancement of the critical current through a conformally mapped random pinscape, where the distribution of the local density of pinning sites is further enlarged. Our findings highlight the potential of random pinscapes in enhancing the superconducting critical currents of applied superconductors in which random pin sites of nanoscale defects emerging in the materials synthesis process or through ex-situ irradiation are the only practical choice for large-scale production. Our results may also stimulate research on effects of a random pinscape in other complementary systems such as colloidal crystals, Bose-Einstein condensates, and Luttinger liquids.

36 MATERIALS SCIENCE↗

Building a Cutting-Edge STEM to Study Nuclear Materials

The Radiochemical Processing Laboratory at PNNL is home to a new flagship JEOL GrandARM-300F scanning transmission electron microscope. This unique instrument will allow unprecedented atomic-scale characterization of nuclear materials, structural alloys, and functional systems in dynamic conditions.

36 MATERIALS SCIENCE↗

Hot Press Market Study

A study has been conducted to identify vendors for a hot press suitable for meeting program deliverables chiefly to achieve a higher TRL for the material and process. This study identities the high level specifications for the hot press which must be able to produce samples to support both the fabrication method development and fabricate full size components for testing to demonstrate success. Three vendors capable of meeting hot press specifications were contacted and estimates were obtained. A comparison of the equipment was performed and a recommendation is made for equipment acquisition.

36 MATERIALS SCIENCE↗

Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films

Laser-induced periodic surface structures (LIPSSs) and chemical composition changes of Ti-based nanolayered thin films (Al/Ti, Ni/Ti) after femtosecond (fs) laser pulses action were studied. Irradiation is performed using linearly polarized Ti:Sapphire fs laser pulses of 40 fs pulse duration and 800 nm wavelength. The low spatial frequency LIPSS (LSFL), oriented perpendicular to the laser polarization with periods slightly lower than the irradiation wavelength, was typically formed at elevated laser fluences. On the contrary, high spatial frequency LIPSS (HSFL) with uniform period of 155 nm, parallel to the laser light polarization, appeared at low laser fluences, as well as in the wings of the Gaussian laser beam distribution for higher used fluence. LSFL formation was associated with the material ablation process and accompanied by the intense formation of nanoparticles, especially in the Ni/Ti system. The composition changes at the surface of both multilayer systems in the LSFL area indicated the intermixing between layers and the substrate. Concentration and distribution of all constitutive elements in the irradiated area with formed HSFLs were almost unchanged.

36 MATERIALS SCIENCE↗

Additive Manufacturing of Thermoset Cellular Structures

Magnum Venus Products (MVP) and Oak Ridge National Laboratory (ORNL) set out to develop and commercialize a 3D printer depositing thermoset polymers with a build volume accommodating mid-scale applications capable of deposition rate exceeding 10 lb/hr with resolution of 3 mm or less. The objective of this work was to demonstrate the ability to efficiently print light weight cellular structures for application in load bearing structural applications, thereby transforming the mid to large scale additive technology. The project was organized around three main tasks: 1. Thermoset printer development, 2. Material and process parameter development and 3. Demonstration. The MVP-ORNL team successfully carried out the project by creating the first thermoset 3D printer of this size in the world and by using it to demonstrate the ability to print cellular structures. The team was awarded the Award for Composites Excellence at the 2018 CAMX conference for this development.

36 MATERIALS SCIENCE↗

Cobalt Polypyridyl Complexes as Transparent Solution-Processable Solid-State Charge Transport Materials

Charge transport materials (CTMs) are traditionally inorganic semiconductors or metals. Yet, over the past few decades, new classes of solution-processable CTMs have evolved alongside new concepts for fabricating electronic devices at low cost and with exceptional properties. The vast majority of these novel materials are organic compounds and the use of transition metal complexes in electronic applications remains largely unexplored. In this work, a solution-processable solid-state charge transport material composed of a blend of [Co(bpyPY4)](OTf) 2 and Co(bpyPY4)](OTf) 3 where bpyPY4 is the hexadentate ligand 6,6'-bis(1,1-di(pyridin-2-yl)ethyl)-2,2'-bipyridine and OTf - is the trifluoromethanesulfonate anion is reported. Surprisingly, these films exhibit a negative temperature coefficient of conductivity (dσ/d T ) and non-Arrhenius behavior, with respectable solid-state conductivities of 3.0 S m -1 at room temperature and 7.4 S m -1 at 4.5 K. When employed as a CTM in a solid-state dye-sensitized solar cell, these largely amorphous, transparent films afford impressive solar energy conversion efficiencies of up to 5.7%. Organic–inorganic hybrid materials with negative temperature coefficients of conductivity generally feature extended flat π-systems with strong π–π interactions or high crystallinity. The lack of these features promotes [Co(bpyPY4)](OTf) 2+ x films as a new class of CTMs with a unique charge transport mechanism that remains to be explored.

36 MATERIALS SCIENCE↗

Design Optimization and Measurement Uncertainty of an Electromagnetic Level Sensor for Liquid Metal Reactors

Here, this article describes the design and operation of a prototype mutual inductance level sensor (MILS) and the development and validation of a finite-element analysis (FEA) model describing its behavior. The MILS was designed for use in liquid sodium up to temperatures of 650 °C in the Mechanisms Engineering Test Loop (METL) at Argonne National Laboratory (ANL). Preliminary testing was performed in a room temperature test stand with aluminum acting as an analog for the sodium to better understand sensor performance and provide accurate code validation data. This experimental data, along with material properties found in literature, were used to validate an FEA model in ANSYS Maxwell. The validated ANSYS Maxwell model was used to examine the performance of the MILS in various environments and under various operating conditions. Simulations suggest the following: The MILS will perform adequately in liquid sodium and liquid lead at temperatures up to 650 °C . The temperature dependence of electrical conductivity imposes a temperature dependence on the sensor that requires proper compensation. The MILS signal sensitivity is maximized when mutual inductance between sensor coils is maximized, and sensor geometry should be selected to account for this factor. The operating frequency of the MILS can be optimized and is dependent on process fluid material, operating temperature, and materials/geometry of sensor system. Finally, the use of a stainless-steel isolating thimble does not adversely affect the sensor signal. The primary sources of error for this MILS system are the accuracy of the calibration standard against which the sensor is calibrated, and the temperature dependence of the sensor. This work contains all the necessary details to recreate the FEA model and results. This model can be used to optimize the performance of a MILS in any operating environment to read any electrically conductive working fluid.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effect of water vapor on plasma processing at atmospheric pressure: polymer etching and surface modification by an Ar/H 2 O plasma jet

In this study, we evaluate the effect of water vapor on the plasma processing of materials using a model system consisting of a well-characterized radio-frequency (RF) plasma jet, controlled gaseous environment, and polystyrene (PS) as target material. We find that the effluent of Ar/H 2 O plasma jet is capable of (1) etching polymers with relatively high etch rate and (2) weakly oxidizing the etched polymer surface by forming O containing moieties. When increasing the treatment distance between the polymer and the Ar/H 2 O plasma, we find that the polymer etch rate drops exponentially whereas the O elemental composition of the etched surface shows a maximum at intermediate treatment distance. The OH density in the Ar/H 2 O jet was measured near the substrate surface by laser induced fluorescence (LIF), and the density change of the OH radicals with treatment distance is found to be consistent with the exponential decrease of polymer etch rate, which indicates that OH may play a dominant role in the polymer etching process. A control experiment of Ar/H 2 plasma shows that the observed fast polymer etching by Ar/H 2 O plasma cannot be attributed to H atoms. By correlating the OH flux with the polymer etch rate, we estimated the etching reaction coefficient (number of C atoms removed per OH radical from the gas phase) of OH radicals as ~10 -2 . The polymer etch rate of Ar/H 2 O plasma is enhanced as the substrate temperature is lowered, which can be explained by the enhanced surface adsorption of gas phase species. For the same molecular admixture concentration and plasma power, we find that Ar/H 2 O/O 2 plasma has much reduced etching efficiency compared to either Ar/H 2 O or Ar/O 2 plasma.

36 MATERIALS SCIENCE↗

Visualization of ultrafast melting initiated from radiation-driven defects in solids

Materials exposed to extreme radiation environments such as fusion reactors or deep spaces accumulate substantial defect populations that alter their properties and subsequently the melting behavior. The quantitative characterization requires visualization with femtosecond temporal resolution on the atomic-scale length through measurements of the pair correlation function. Here, we demonstrate experimentally that electron diffraction at relativistic energies opens a new approach for studies of melting kinetics. Our measurements in radiation-damaged tungsten show that the tungsten target subjected to 10 displacements per atom of damage undergoes a melting transition below the melting temperature. Two-temperature molecular dynamics simulations reveal the crucial role of defect clusters, particularly nanovoids, in driving the ultrafast melting process observed on the time scale of less than 10 ps. These results provide new atomic-level insights into the ultrafast melting processes of materials in extreme environments.

36 MATERIALS SCIENCE↗

Using quantum dots to tag subsurface damage in lapped and polished glass samples

Grinding, lapping, and polishing are finishing processes used to achieve critical surface parameters in a variety of precision optical and electronic components. As these processes remove material from the surface through mechanical and chemical interactions, they may induce a damaged layer of cracks, voids, and stressed material below the surface. This subsurface damage (SSD) can degrade the performance of a final product by creating optical aberrations due to diffraction, premature failure in oscillating components, and a reduction in the laser induced damage threshold of high energy optics. As these defects lie beneath the surface, they are difficult to detect, and while many methods are available to detect SSD, they can have notable limitations regarding sample size and type, preparation time, or can be destructive in nature. The authors tested a nondestructive method for assessing SSD that consisted of tagging the abrasive slurries used in lapping and polishing with quantum dots (nano-sized fluorescent particles). Subsequent detection of fluorescence on the processed surface is hypothesized to indicate SSD. Quantum dots that were introduced to glass surfaces during the lapping process were retained through subsequent polishing and cleaning processes. The quantum dots were successfully imaged by both wide field and confocal fluorescence microscopy techniques. The detected fluorescence highlighted features that were not observable with optical or interferometric microscopy. Atomic force microscopy and additional confocal microscope analysis indicate that the dots are firmly embedded in the surface but do not appear to travel deep into fractures beneath the surface. Etching of the samples exhibiting fluorescence confirmed that SSD existed. SSD-free samples exposed to quantum dots did not retain the dots in their surfaces, even when polished in the presence of quantum dots.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of an accelerator-based diagnostic for plasma-facing surfaces in magnetic confinement devices

The focus of this work was the development of the Accelerator-based In-situ Material Surveillance (AIMS) diagnostic. The understanding of plasma-material interaction processes in fusion devices has been greatly hampered by the lack of ability to measure the surface ~micron layers of solid surfaces that are in contact with and greatly modified by the boundary fusion plasma. AIMS was the first diagnostic developed and deployed that allowed non-destructive surface measurements with adequate spatial and time resolution. The deployment was primarily carried out on the Alcator C-Mod tokamak. AIMS diagnostic goal is to remotely generate isotopic concentration maps on a plasma shot-to-shot timescale that cover a large fraction of the plasma-facing surface inside of a magnetic fusion device without the need for vacuum breaks or physical access to the material surfaces. The diagnostic used a compact (~ 1 m), high-current (~ 1 milliamp) radio-frequency quadrupole accelerator to inject 0.9 MeV deuterons into the Alcator C-Mod tokamak. The tokamak magnetic fields were controlled – in between plasma shots – to steer the deuterons to material surfaces where the deuterons cause high-Q nuclear reactions with low-Z isotopes up to 5 microns into the material. The induced neutrons and gamma rays are measured with scintillation detectors; energy spectra analysis provides quantitative reconstruction of surface compositions. Experimental validation showed that low-Z isotopes such as deuterium and boron can be quantified on the material surfaces, and that magnetic steering provides access to different measurement locations. AIMS measurements of D retention on inner wall PFCs were acquired during diverted and limited plasma operations and during wall conditioning experiments om Alcator C-Mod. Intershot measurements demonstrate the local erosion and co-deposition of boron films on PFC surfaces with a constant D-B ratio. This is consistent with previous results suggesting that D co-=deposition with boron is insufficient to account for the net retention observed in Alcator C-Mod. Changes in deuterium concentration during boronization, electron cyclotron and glow cleanings were also measured. These initial results were limited to studying low-Z surface properties, because the Coulomb barrier precludes nuclear reactions between high-Z elements and the ~1 MeV AIMS deuteron beam. In order to measure the high-Z erosion of interest in Alcator C-Mod and future fusion devices, a new technique using deuteron-induced gamma emission and a low-Z depth marker was developed using implanted depth markers as a method of measuring bulk erosion and redeposition. This method is dubbed DEA: Depth marker Erosion with AIMS. DEA simulations and experiments were used to validate this technique, both in the laboratory and via experiments in the EAST tokamak. Based on these results, the DEA technique, using ion beam implanted depth markers as a reference to the surface in order to monitor surfaces for erosion and redeposition, is a viable option as a diagnostic, both in and ex situ. These markers show stability to temperature, the tokamak environment, and multiple probing beams. The ex-situ (eDEA) method, which uses resonances in the cross sections of gamma producing reactions to track the surface, was used to successfully measure erosion in samples that were exposed in the EAST tokamak. The in-situ (iDEA) method, which uses the gamma yield ratio to monitor changes to the surface, was used to differentiate between markers implanted to different depths. Both techniques were successfully simulated, and both presented unique challenges experimentally and in data analysis. In particular, the eDEA probing beam was found to have energy variations leading to initial experimental uncertainty, and the iDEA gamma spectra had conflicting gamma peaks which make data analysis difficult. However, the end result is a promising framework for a diagnostic technique that supplements the abilities of AIMS and expands the possibilities of surface diagnostics in fusion devices. While the results of this work are overwhelmingly encouraging for further development of AIMS in general, and the DEA technique specifically, several areas require significant development before this diagnostic is as robust and widely applicable as a surface diagnostic ought to be. Recommended future work includes the development of a cross section/yield measurement database, erosion tests with secondary verification of results using a fiducial mark from a focused ion beam, and acquiring a new accelerator with a more reliable high energy proton and deuterium beam The project resulted in 14 publications, including the PhD theses of three MIT graduate students, cited in the included bibliography.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗