Search NASA⌕ Search

SEARCH · Search NASA

Results for “mean squared error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Comparative analysis of operational forecasts versus actual weather conditions in airline flight planning, volume 3

The impact of more timely and accurate weather data on airline flight planning with the emphasis on fuel savings is studied. This volume of the report discusses the results of Task 3 of the four major tasks included in the study. Task 3 compares flight plans developed on the Suitland forecast with actual data observed by the aircraft (and averaged over 10 degree segments). The results show that the average difference between the forecast and observed wind speed is 9 kts. without considering direction, and the average difference in the component of the forecast wind parallel to the direction of the observed wind is 13 kts. - both indicating that the Suitland forecast underestimates the wind speeds. The Root Mean Square (RMS) vector error is 30.1 kts. The average absolute difference in direction between the forecast and observed wind is 26 degrees and the temperature difference is 3 degree Centigrade. These results indicate that the forecast model as well as the verifying analysis used to develop comparison flight plans in Tasks 1 and 2 is a limiting factor and that the average potential fuel savings or penalty are up to 3.6 percent depending on the direction of flight.

Keitz, J. F.↗

Topographical Mapping With Synthetic-Aperture Radar

Interferometric side-looking synthetic-aperture radar shows promise for high-resolution topographical mapping of terrain. Airplane carries two radar antennas. Radar signal transmitted by right antenna, reflected from ground received by both antennas. Amplitudes and phases of received signals recorded and processed separately to yield two 10-m-resolution amplitude-and-phase images of illuminated terrain. Two images mathematically combined point by point to obtain signal image containing interference fringes: phase at each location of image is difference between phases in two signals and amplitude at each location is project of amplitudes of two signals. Theoretically, technique has potential to attain a root-mean-square (rms) altitude error as small as 2 m.

Zebker, Howard A.↗

Minimizing distortion and internal forces in truss structures by simulated annealing

Inaccuracies in the length of members and the diameters of joints of large truss reflector backup structures may produce unacceptable levels of surface distortion and member forces. However, if the member lengths and joint diameters can be measured accurately it is possible to configure the members and joints so that root-mean-square (rms) surface error and/or rms member forces is minimized. Following Greene and Haftka (1989) it is assumed that the force vector f is linearly proportional to the member length errors e(sub M) of dimension NMEMB (the number of members) and joint errors e(sub J) of dimension NJOINT (the number of joints), and that the best-fit displacement vector d is a linear function of f. Let NNODES denote the number of positions on the surface of the truss where error influences are measured. The solution of the problem is discussed. To classify, this problem was compared to a similar combinatorial optimization problem. In particular, when only the member length errors are considered, minimizing d(sup 2)(sub rms) is equivalent to the quadratic assignment problem. The quadratic assignment problem is a well known NP-complete problem in operations research literature. Hence minimizing d(sup 2)(sub rms) is is also an NP-complete problem. The focus of the research is the development of a simulated annealing algorithm to reduce d(sup 2)(sub rms). The plausibility of this technique is its recent success on a variety of NP-complete combinatorial optimization problems including the quadratic assignment problem. A physical analogy for simulated annealing is the way liquids freeze and crystallize. All computational experiments were done on a MicroVAX. The two interchange heuristic is very fast but produces widely varying results. The two and three interchange heuristic provides less variability in the final objective function values but runs much more slowly. Simulated annealing produced the best objective function values for every starting configuration and was faster than the two and three interchange heuristic.

Kincaid, Rex K.↗

Planetary ephemerides approximation for radar astronomy

The planetary ephemerides approximation for radar astronomy is discussed, and, in particular, the effect of this approximation on the performance of the programmable local oscillator (PLO) used in Goldstone Solar System Radar is presented. Four different approaches are considered and it is shown that the Gram polynomials outperform the commonly used technique based on Chebyshev polynomials. These methods are used to analyze the mean square, the phase error, and the frequency tracking error in the presence of the worst case Doppler shift that one may encounter within the solar system. It is shown that in the worst case the phase error is under one degree and the frequency tracking error less than one hertz when the frequency to the PLO is updated every millisecond.

Sadr, R.↗

Integrated controls-structures design methodology development for a class of flexible spacecraft

Future utilization of space will require large space structures in low-Earth and geostationary orbits. Example missions include: Earth observation systems, personal communication systems, space science missions, space processing facilities, etc., requiring large antennas, platforms, and solar arrays. The dimensions of such structures will range from a few meters to possibly hundreds of meters. For reducing the cost of construction, launching, and operating (e.g., energy required for reboosting and control), it will be necessary to make the structure as light as possible. However, reducing structural mass tends to increase the flexibility which would make it more difficult to control with the specified precision in attitude and shape. Therefore, there is a need to develop a methodology for designing space structures which are optimal with respect to both structural design and control design. In the current spacecraft design practice, it is customary to first perform the structural design and then the controller design. However, the structural design and the control design problems are substantially coupled and must be considered concurrently in order to obtain a truly optimal spacecraft design. For example, let C denote the set of the 'control' design variables (e.g., controller gains), and L the set of the 'structural' design variables (e.g., member sizes). If a structural member thickness is changed, the dynamics would change which would then change the control law and the actuator mass. That would, in turn, change the structural model. Thus, the sets C and L depend on each other. Future space structures can be roughly divided into four mission classes. Class 1 missions include flexible spacecraft with no articulated appendages which require fine attitude pointing and vibration suppression (e.g., large space antennas). Class 2 missions consist of flexible spacecraft with articulated multiple payloads, where the requirement is to fine-point the spacecraft and each individual payload while suppressing the elastic motion. Class 3 missions include rapid slewing of spacecraft without appendages, while Class 4 missions include general nonlinear motion of a flexible spacecraft with articulated appendages and robot arms. Class 1 and 2 missions represent linear mathematical modeling and control system design problems (except for actuator and sensor nonlinearities), while Class 3 and 4 missions represent nonlinear problems. The development of an integrated controls/structures design approach for Class 1 missions is addressed. The performance for these missions is usually specified in terms of (1) root mean square (RMS) pointing errors at different locations on the structure, and (2) the rate of decay of the transient response. Both of these performance measures include the contributions of rigid as well as elastic motion.

Maghami, P. G.↗

FFT-based methods for simulating flicker FM

Four algorithms for simulating flicker FM phase noise are given, two old and two new. Their Allan deviation and mean square time interval error (MSTIE) are examined.

flicker noise simulation phase noise↗

Minimum distortion quantizers

The well-known algorithm of Max is used to determine the minimum distortion quantizers for normal, two-sided exponential, and specialized two-sided gamma input distributions and for mean-square, magnitude, and relative magnitude error distortion criteria. The optimum equally-spaced and unequally-spaced quantizers are found, with the resulting quantizer distortion and entropy. The quantizers, and the quantizers with entropy coding, are compared to the rate distortion bounds for mean-square and magnitude error.

Jones, H. W., Jr.↗

Criteria for stochastic pinning control of networks of chaotic maps

This paper investigates the controllability of discrete-time networks of coupled chaotic maps through stochastic pinning. In this control scheme, the network dynamics are steered towards a desired trajectory through a feedback control input that is applied stochastically to the network nodes. The network controllability is studied by analyzing the local mean square stability of the error dynamics with respect to the desired trajectory. Through the analysis of the spectral properties of salient matrices, a toolbox of conditions for controllability are obtained, in terms of the dynamics of the individual maps, algebraic properties of the network, and the probability distribution of the pinning control. We demonstrate the use of these conditions in the design of a stochastic pinning control strategy for networks of Chirikov standard maps. To elucidate the applicability of the approach, we consider different network topologies and compare five different stochastic pinning strategies through extensive numerical simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Error probability performance of unbalanced QPSK receivers

A simple technique for calculating the error probability performance and associated noisy reference loss of practical unbalanced QPSK receivers is presented. The approach is based on expanding the error probability conditioned on the loop phase error in a power series in the loop phase error and then, keeping only the first few terms of this series, averaging this conditional error probability over the probability density function of the loop phase error. Doing so results in an expression for the average error probability which is in the form of a leading term representing the ideal (perfect synchronization references) performance plus a term proportional to the mean-squared crosstalk. Thus, the additional error probability due to noisy synchronization references occurs as an additive term proportional to the mean-squared phase jitter directly associated with the receiver's tracking loop. Similar arguments are advanced to give closed-form results for the noisy reference loss itself.

Simon, M. K.↗

30 years of adaptive neural networks - Perceptron, Madaline, and backpropagation

Fundamental developments in feedforward artificial neural networks from the past thirty years are reviewed. The history, origination, operating characteristics, and basic theory of several supervised neural-network training algorithms (including the perceptron rule, the least-mean-square algorithm, three Madaline rules, and the backpropagation technique) are described. The concept underlying these iterative adaptation algorithms is the minimal disturbance principle, which suggests that during training it is advisable to inject new information into a network in a manner that disturbs stored information to the smallest extent possible. The two principal kinds of online rules that have developed for altering the weights of a network are examined for both single-threshold elements and multielement networks. They are error-correction rules, which alter the weights of a network to correct error in the output response to the present input pattern, and gradient rules, which alter the weights of a network during each pattern presentation by gradient descent with the objective of reducing mean-square error (averaged over all training patterns).

Widrow, Bernard↗

Synthesis of hover autopilots for rotary-wing VTOL aircraft

The practical situation is considered where imperfect information on only a few rotor and fuselage state variables is available. Filters are designed to estimate all the state variables from noisy measurements of fuselage pitch/roll angles and from noisy measurements of both fuselage and rotor pitch/roll angles. The mean square response of the vehicle to a very gusty, random wind is computed using various filter/controllers and is found to be quite satisfactory although, of course, not so good as when one has perfect information (idealized case). The second part of the report considers precision hover over a point on the ground. A vehicle model without rotor dynamics is used and feedback signals in position and integral of position error are added. The mean square response of the vehicle to a very gusty, random wind is computed, assuming perfect information feedback, and is found to be excellent. The integral error feedback gives zero position error for a steady wind, and smaller position error for a random wind.

Hall, W. E.↗

Top-of-Atmosphere Shortwave Broadband Observed Radiance and Estimated Irradiance over Polar Regions from Clouds and the Earth's Radiant Energy System (CERES) Instruments on Terra

Empirical angular distribution models for estimating top-of-atmosphere shortwave irradiances from radiance measurements over permanent snow, fresh snow and sea ice are developed using CERES measurements on Terra. Permanent snow angular distribution models depend on cloud fraction, cloud optical thickness, and snow brightness. Fresh snow and sea ice angular distribution models depend on snow and sea ice fraction, cloud fraction, cloud optical thickness, and snow and ice brightness. These classifications lead to 10 scene types for permanent snow and 25 scene types for fresh snow and sea ice. The average radiance over clear-sky permanent snow is more isotropic with satellite viewing geometry than that over overcast permanent snow. On average, the albedo of clear-sky permanent snow varies from 0.65 to 0.68 for solar zenith angles between 60$logical and\circ$ and 80 deg, while the corresponding albedo of overcast scenes varies from 0.70 to 0.73. Clear-sky permanent snow albedos over Antarctica estimated from two independent angular distribution models are consistent to within 0.6%, on average. Despite significant variability in sea ice optical properties with season, the estimated mean relative albedo error is -1 % for very dark sea ice and 0.1% for very bright sea ice when albedos derived from different viewing angles are averaged. The estimated regional root-mean-square (RMS) relative albedo error is 5.6% and 2.6% when the sea ice angular distribution models are applied to a region that contains very dark and very bright sea ice, respectively. Similarly, the estimated relative albedo bias error for fresh snow is -0.1% for very dark snow.

Kato, S.↗

Semi-automatic Methods for Airway and Adjacent Vessel Measurement in Bronchiectasis Patterns in Lung HRCT Images of Cystic Fibrosis Patients

Airway and vessel characterization of bronchiectasis patterns in lung high-resolution computed tomography (HRCT) images of cystic fibrosis (CF) patients is very important to compute the score of disease severity. We propose a hybrid and evolutionary optimized threshold and model-based method for characterization of airway and vessel in lung HRCT images of CF patients. First, the initial model of airway and vessel is obtained using the enhanced threshold-based method. Then, the model is fitted to the actual image by optimizing its parameters using particle swarm optimization (PSO) evolutionary algorithm. The experimental results demonstrated the outperformance of the proposed method over its counterpart in R-squared, mean and variance of error, and run time. Moreover, the proposed method outperformed its counterpart for airway inner diameter/vessel diameter (AID/VD) and airway wall thickness/vessel diameter (AWT/VD) biomarkers in R-squared and slope of regression analysis.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Iterative Learning Control for High-Speed Rosette Trajectory Tracking

We demonstrate high-speed tracking of a selfrepeating non-raster scan AFM pattern known as rosette. To generate this pattern, the lateral axes of the scanner trace a sum of two sinusoids with different frequencies but identical amplitudes. A feedback controller is combined with an iterative learning controller (ILC) to track this repetitive pattern. The feedback controller is designed based on the internal model principle and incorporates the fundamental reference frequencies. The ILC eliminates the repeating deterministic disturbances that appear in the tracking error. To verify the efficacy of the control approach, an experiment is conducted using a two degrees-of-freedom microelectromechanical system nanopositioner to track a rosette pattern sequentially at the rate= of five frames per second. The experimental results show that the root-mean-square value of tracking error has been reduced by more than 50% owing to the ILC

42 ENGINEERING↗

Aligning Arrays of Lenses and Single-Mode Optical Fibers

A procedure now under development is intended to enable the precise alignment of sheet arrays of microscopic lenses with the end faces of a coherent bundle of as many as 1,000 single-mode optical fibers packed closely in a regular array (see Figure 1). In the original application that prompted this development, the precise assembly of lenses and optical fibers serves as a single-mode spatial filter for a visible-light nulling interferometer. The precision of alignment must be sufficient to limit any remaining wavefront error to a root-mean-square value of less than 1/10 of a wavelength of light. This wavefront-error limit translates to requirements to (1) ensure uniformity of both the lens and fiber arrays, (2) ensure that the lateral distance from the central axis of each lens and the corresponding optical fiber is no more than a fraction of a micron, (3) angularly align the lens-sheet planes and the fiber-bundle end faces to within a few arc seconds, and (4) axially align the lenses and the fiber-bundle end faces to within tens of microns of the focal distance. Figure 2 depicts the apparatus used in the alignment procedure. The beam of light from a Zygo (or equivalent) interferometer is first compressed by a ratio of 20:1 so that upon its return to the interferometer, the beam will be magnified enough to enable measurement of wavefront quality. The apparatus includes relay lenses that enable imaging of the arrays of microscopic lenses in a charge-coupled-device (CCD) camera that is part of the interferometer. One of the arrays of microscopic lenses is mounted on a 6-axis stage, in proximity to the front face of the bundle of optical fibers. The bundle is mounted on a separate stage. A mirror is attached to the back face of the bundle of optical fibers for retroreflection of light. When a microscopic lens and a fiber are aligned with each other, the affected portion of the light is reflected back by the mirror, recollimated by the microscopic lens, transmitted through the relay lenses and the beam compressor/expander, then split so that half goes to a detector and half to the interferometer. The output of the detector is used as a feedback control signal for the six-axis stage to effect alignment.

Liu, Duncan↗

Alterations of the climate of a primitive equation model produced by filtering approximations and subsequent tuning and stochastic forcing

A comparison is made of the simulated climates of nonlinear models based on the primitive equations (PE), balance equations (BE), and quasi-geostrophic (QG) equations. The models and numerical procedures are identical in all possible respects. The models are highly truncated spectral forms of Lorenz's (1960) energy preserving two-layer model. Two means of making use of the information contained in the (presumed known) short-term prediction error statistics are investigated. An unrealistically high level of thermal forcing is used so that the model climates are sufficiently different to allow any improvements due to the empirical methods to be observed. The general tuning problem is outlined and the QG model is tuned, using data obtained from a PE model run, to minimize the mean squared short term prediction error.

Hoffman, R. N.↗

Multipath error in range rate measurement by PLL-transponder/GRARR/TDRS

Range rate errors due to specular and diffuse multipath are calculated for a tracking and data relay satellite (TDRS) using an S band Goddard range and range rate (GRARR) system modified with a phase-locked loop transponder. Carrier signal processing in the coherent turn-around transponder and the GRARR reciever is taken into account. The root-mean-square (rms) range rate error was computed for the GRARR Doppler extractor and N-cycle count range rate measurement. Curves of worst-case range rate error are presented as a function of grazing angle at the reflection point. At very low grazing angles specular scattering predominates over diffuse scattering as expected, whereas for grazing angles greater than approximately 15 deg, the diffuse multipath predominates. The range rate errors at different low orbit altutudes peaked between 5 and 10 deg grazing angles.

Sohn, S. J.↗

Track-Level-Compensation Look-Up Table Improves Antenna Pointing Precision

This article presents the improvement of the beam-waveguide antenna pointing accuracy due to the implementation of the track-level-compensation look-up table. It presents the development of the table, from the measurements of the inclinometer tilts to the processing of the measurement data and the determination of the threeaxis alidade rotations. The table consists of three axis rotations of the alidade as a function of the azimuth position. The article also presents the equations to determine the elevation and cross-elevation errors of the antenna as a function of the alidade rotations and the antenna azimuth and elevation positions. The table performance was verified using radio beam pointing data. The pointing error decreased from 4.5 mdeg to 1.4 mdeg in elevation and from 14.5 mdeg to 3.1 mdeg in cross-elevation. I. Introduction The Deep Space Station 25 (DSS 25) antenna shown in Fig. 1 is one of NASA s Deep Space Network beam-waveguide (BWG) antennas. At 34 GHz (Ka-band) operation, it is necessary to be able to track with a pointing accuracy of 2-mdeg root-mean-square (rms). Repeatable pointing errors of several millidegrees of magnitude have been observed during the BWG antenna calibration measurements. The systematic errors of order 4 and lower are eliminated using the antenna pointing model. However, repeatable pointing errors of higher order are out of reach of the model. The most prominent high-order systematic errors are the ones caused by the uneven azimuth track. The track is shown in Fig. 2. Manufacturing and installation tolerances, as well as gaps between the segments of the track, are the sources of the pointing errors that reach over 14-mdeg peak-to-peak magnitude, as reported in [1,2]. This article presents a continuation of the investigations and measurements of the pointing errors caused by the azimuth-track-level unevenness that were presented in [1] and [2], and it presents the implementation results. Track-level-compensation (TLC) look-up tables were created for the DSS 25, DSS 26, DSS 34, and DSS 55 antennas. To date, the most complete and detailed results were obtained for the DSS 25 and DSS 55 antennas. In this article, for brevity of presentation, we present the DSS 25 antenna results only. 1 Communications Ground Systems Section. The research described in this publication was carried out by the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.

Gawronski, W.↗