Search NASA⌕ Search

SEARCH · Search NASA

Results for “missing data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Measurement of electroweak-induced production of W$\gamma$ with two jets in pp collisions at $ \sqrt{s}=8 $ TeV and constraints on anomalous quartic gauge couplings

A measurement of electroweak-induced production of Wγ and two jets is performed, where the W boson decays leptonically. The data used in the analysis correspond to an integrated luminosity of 19.7 fb$^{−1}$ collected by the CMS experiment in $ \sqrt{s}=8 $ TeV proton-proton collisions produced at the LHC. Candidate events are selected with exactly one muon or electron, missing transverse momentum, one photon, and two jets with large rapidity separation. An excess over the hypothesis of the standard model without electroweak production of Wγ with two jets is observed with a significance of 2.7 standard deviations. The cross section measured in the fiducial region is 10.8 ± 4.1(stat) ± 3.4(syst) ± 0.3(lumi) fb, which is consistent with the standard model electroweak prediction. The total cross section for Wγ in association with two jets in the same fiducial region is measured to be 23.2 ± 4.3(stat) ± 1.7(syst) ± 0.6(lumi) fb, which is consistent with the standard model prediction from the combination of electroweak and quantum chromodynamics-induced processes. No deviations are observed from the standard model predictions and experimental limits on anomalous quartic gauge couplings f$_{M,0−7}$ /Λ$^{4}$, f$_{T,0−2}$ /Λ$^{4}$, and f$_{T,5−7}$ /Λ$^{4}$ are set at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for supersymmetry in proton-proton collisions at 13 TeV in final states with jets and missing transverse momentum

Results are reported from a search for supersymmetric particles in the final state with multiple jets and large missing transverse momentum. The search uses a sample of proton-proton collisions at $ \sqrt{s} $ = 13 TeV collected with the CMS detector in 2016–2018, corresponding to an integrated luminosity of 137 fb$^{–1}$, representing essentially the full LHC Run 2 data sample. The analysis is performed in a four-dimensional search region defined in terms of the number of jets, the number of tagged bottom quark jets, the scalar sum of jet transverse momenta, and the magnitude of the vector sum of jet transverse momenta. No significant excess in the event yield is observed relative to the expected background contributions from standard model processes. Limits on the pair production of gluinos and squarks are obtained in the framework of simplified models for supersymmetric particle production and decay processes. Assuming the lightest supersymmetric particle to be a neutralino, lower limits on the gluino mass as large as 2000 to 2310 GeV are obtained at 95% confidence level, while lower limits on the squark mass as large as 1190 to 1630 GeV are obtained, depending on the production scenario.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the polarisation of single top quarks and antiquarks produced in the $t$-channel at $ \sqrt{s} $ = 13 TeV and bounds on the $tWb$ dipole operator from the ATLAS experiment

A simultaneous measurement of the three components of the top-quark and top-antiquark polarisation vectors in t-channel single-top-quark production is presented. This analysis is based on data from proton–proton collisions at a centre-of-mass energy of 13 TeV corresponding to an integrated luminosity of 139 fb –1 , collected with the ATLAS detector at the LHC. Selected events contain exactly one isolated electron or muon, large missing transverse momentum and exactly two jets, one being b-tagged. Stringent selection requirements are applied to discriminate t-channel single-top-quark events from the background contributions. The top-quark and top-antiquark polarisation vectors are measured from the distributions of the direction cosines of the charged-lepton momentum in the top-quark rest frame. The three components of the polarisation vector for the selected top-quark event sample are P x' = 0.01 ± 0.18, P y' = –0.029 ± 0.027, P z' = 0.91 ± 0.10 and for the top-antiquark event sample they are P x' = –0.02 ± 0.20, P y' = –0.007 ± 0.051, P z' = 0.79 ± 0.16. Normalised differential cross-sections corrected to a fiducial region at the stable-particle level are presented as a function of the charged-lepton angles for top-quark and top-antiquark events inclusively and separately. These measurements are in agreement with Standard Model predictions. The angular differential cross-sections are used to derive bounds on the complex Wilson coefficient of the dimension-six O tW operator in the framework of an effective field theory. The obtained bounds are C tW ϵ [–0.9, 1.4] and C itW ϵ [–0.8, 0.2], both at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for new Higgs bosons via same-sign top quark pair production in association with a jet in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A search is presented for new Higgs bosons in proton-proton (pp) collision events in which a same-sign top quark pair is produced in association with a jet, via the pp $\to$ tH/A $\to$ t$\mathrm{\bar{t}}$c and pp $\to$ tH/A $\to$ t$\mathrm{\bar{t}}$u processes. Here, H and A represent the extra scalar and pseudoscalar boson, respectively, of the second Higgs doublet in the generalized two-Higgs-doublet model (g2HDM). The search is based on pp collision data collected at a center-of-mass energy of 13 TeV with the CMS detector at the LHC, corresponding to an integrated luminosity of 138 fb$^{-1}$. Final states with a same-sign lepton pair in association with jets and missing transverse momentum are considered. New Higgs bosons in the 200-1000 GeV mass range and new Yukawa couplings between 0.1 and 1.0 are targeted in the search, for scenarios in which either H or A appear alone, or in which they coexist and interfere. No significant excess above the standard model prediction is observed. Exclusion limits are derived in the context of the g2HDM.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comment on “Large Enhancement in High-Energy Photoionization of Fe XVII and Missing Continuum Plasma Opacity”

Recent R-matrix calculations claim to provide a significant enhancement in the opacity of Fe XVII due to atomic core excitations and assert that this enhancement is consistent with recent measurements of higher-than-predicted iron opacities. Here this comment shows that the standard opacity models which have already been directly compared with experimental data produce photon absorption cross-sections for Fe XVII that are effectively equivalent to the R-matrix opacities reported in.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Precise predictions for $V+$jets dark matter backgrounds

High-energy jets recoiling against missing transverse energy (MET) are powerful probes of dark matter at the LHC. Searches based on large MET signatures require a precise control of the $Z(\nu\bar\nu)+$jet background in the signal region. This can be achieved by taking accurate data in control regions dominated by $Z(\ell^+\ell^-)+$jet, $W(\ell\nu)+$jet and $\gamma+$jet production, and extrapolating to the $Z(\nu\bar\nu)+$jet background by means of precise theoretical predictions. In this context, recent advances in perturbative calculations open the door to significant sensitivity improvements in dark matter searches. In this spirit, we present a combination of state-of-the art calculations for all relevant $V+$jets processes, including throughout NNLO QCD corrections and NLO electroweak corrections supplemented by Sudakov logarithms at two loops. Predictions at parton level are provided together with detailed recommendations for their usage in experimental analyses based on the reweighting of Monte Carlo samples. Particular attention is devoted to the estimate of theoretical uncertainties in the framework of dark matter searches, where subtle aspects such as correlations across different $V+$jet processes play a key role. In conclusion, the anticipated theoretical uncertainty in the $Z(\nu\bar\nu)+$jet background is at the few percent level up to the TeV range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Detection of Disruptions in the High-β Spherical Torus NSTX

This paper describes the prediction of disruptions based on diagnostic data in the high-β spherical torus NSTX. The disruptive threshold values on many signals are examined. In some cases, raw diagnostic data can be used as a signal for disruption prediction. In others, the deviations of the plasma data from simple models provides the signal used to determine the proximity to disruption. However, no single signal and threshold value can form the basis for disruption prediction in NSTX; thresholds that produce an acceptable false positive rate have too large a missed or late warning rate, while combinations that produce an acceptable rate of missed or late warnings have an unacceptable false positive rate. To solve this problem, a novel means of combining multiple threshold tests has been developed. After being properly tuned, this algorithm can produce a false positive rate of 2.8%, with a late warning rate of 3.7% when applied to a database of ~2000 disruptions collected from three run campaigns. Furthermore, many of these false positives are triggered by near-disruptive MHD events that might indeed be disruptive in larger plasmas with more stored energy. However, the algorithm is less efficient at detecting the MHD event that prompts the disruption process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of W Charge Asymmetry

We discuss W boson and lepton charge asymmetry measurements from W decays in the electron channel, which were made using 9.7 fb$^{-1}$ of RunII data collected by the D0 detector at the Fermilab Tevatron Collider. The electron charge asymmetry is presented as a function of pseudo-rapidity out to |$\eta$| $\le$ 3.2, in five symmetric and asymmetric kinematic bins of electron transverse momentum and the missing transverse energy of the event. We also give the W charge asymmetry as a function of W boson rapidity. The asymmetries are compared with next-to-leading order perturbative quantum chromodynamics calculations. These charge asymmetry measurements will allow more accurate determinations of the proton parton distribution functions and are the most precise to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Oak Ridge National Laboratory Technical Input for the Nuclear Regulatory Commission Review of the 2017 Edition of ASME Section III, Division 5, ‘High Temperature Reactors’

To assist the Nuclear Regulatory Commission in its decision making on endorsement of the American Society for Mechanical Engineers Boiler and Pressure Vessel Code Section III, Division 5 (2017 Edition) for development of advanced non-light water reactors, the following Division 5 portions were reviewed: Article HBB-2000 Material; Article HCB-2000 Material; Article HGB-2000 Material; Mandatory Appendix HBB-I-14 Tables and Figures; and, Nonmandatory Appendix HBB-U Guidelines for Restricted Material Specifications to Improve Performance in Certain Service Applications. In addition to the 2017 Edition, the same parts of the 2019 Edition have also been reviewed as indicated in various sections of the report. This review was conducted by a collaboration of national laboratory and private sector participants with significant industrial experience, including some heavy lifting and deep diving from Clarus Consulting, LLC., all intended to achieve an objective, independent, and practical perspective. The report provides recommendations, descriptions of the evaluation methods, and the source references for the data used. To build confidence required for endorsement of the Code, this review was conducted as a verification and validation of the above Code contents. The objective of verification is to ensure that the Code is free of error – direct or implied; contains the information needed for its use, including proper coverage of the Code-specified materials for the intended application, and completeness and adequacy of references to other portions of the Code. The objective of validation is to authenticate that the Code tabulations and graphs represent design inputs consistent with what are determined using rules and methods specified by the Code. The authentication process used data that were assembled and/or generated independent of Code development, while the methods of analysis followed Code-specified methods where appropriate. The designated portions for this review cover the five alloys codified for high temperature reactor applications in Division 5, i.e. 316 SS, 304 SS, 800H, 2¼Cr-1Mo, and 9Cr-1Mo-V, regarding their general requirements, permitted specifications and design stress intensity values for pressure-retaining applications, deterioration in service, fatigue acceptance test, permissible weld materials, tensile and yield strength, expected minimum stress-to-rupture values (including for Alloy 718), weld stress rupture factors, permissible materials for bolting use, and restricted specifications in certain service applications. Additionally, stress intensity values for bolting materials including 316 SS, 304 SS and alloy 718 were reviewed. Analysis and discussion are also provided on contents outside of these designated Code portions where it was deemed relevant and necessary to develop a technically sound understanding of issues relating to the designated portions. Due to unavailability of sufficient test data on welds during the review period, the weld stress rupture factors in Tables HBB-I-10.14A to E, which cover a total of ten tables for the five alloys welded with twenty-eight different weld metals (some with similar properties), have been deferred to a future review effort. The review identified mainly two types of issues. The first type includes instances where the Code is found factually incomplete or incorrect, such as obsolete materials specifications listings, missing tabulation of stresses for bolting. Changes to the Code are recommended in these cases. The second type of issue includes instances where the Code tabulations and graphs are found to be less conservative than the review analysis results. In these cases, recommendations are made for further review and consideration where the difference in conservatism exceeds 10%, which is our threshold for questioning technical adequacy, meriting a risk assessment by the Nuclear Regulatory Commission and/or reactor designers. It is noted that this effort has been executed using all available data and established methods of analysis, including methods and criteria specified and used by the Code. As such, the findings that are presented in quantitative detail, in a format for convenient comparison with the Code, and with identification of where further review is recommended, should provide a sound technical basis for decisions about quantifying the implications of the reduced design margins and technical adequacy/inadequacy to form a basis for conditioning specific Code tabulation values on endorsement. Recommendations for specific changes to the Code, however, entail design conservatism considerations beyond the scope of this review effort, and are not made in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Expanded analysis of machine learning models for nuclear transient identification using TPOT

Industries around the world are becoming more and more data driven. The nuclear field is no exception with several different applications being proposed. One popular area of research is the use of machine learning in transient detection. This paper seeks to build upon a previous study which made use of the AutoML package TPOT to train traditional machine learning models to classify transient events occurring with a reactor. Synthetic data was once again collected using a GPWR reactor simulator. Data on 12 different events was collected using 15 different initial conditions. Here, a dataset consisting of over 100,000 data points was compiled and used to train 7 different machine learning models using a pre-defined TPOT dictionary with 12 different preprocessing techniques. Three of the trained models were able to produce validation results in the 90s with the expanded dataset. Once the models were trained, it was possible to look into where during the simulation, misclassifications occurred. Using these three models, analysis was done to determine if TPOT could be used to train models that were effective if important features were missing. The results from this were positive with the newly trained models scoring close to the original models. Finally, to conclude this study, the three high performing models were retrained using different random states to see if there was any major variation when different states were used.

42 ENGINEERING↗

Synchronization of Alternative Models in a Supermodel and the Learning of Critical Behavior

“Supermodeling” climate by allowing different models to assimilate data from one another in run time has been shown to give results superior to those of any one model and superior to any weighted average of model outputs. The only free parameters, connection strengths between corresponding variables in each pair of models, are determined using some form of machine learning. It is demonstrated that supermodeling succeeds because near critical states, interscale interactions are important but unresolved processes cannot be effectively represented diagnostically in any single parameterization scheme. In two examples, a pair of toy quasigeostrophic (QG) channel models of the midlatitudes and a pair of ECHAM5 models of the tropical Pacific atmosphere with a common ocean, supermodels dynamically combine parameterization schemes so as to capture criticality, associated critical structures, and the supporting scale interactions. The QG supermodeling scheme extends a previous configuration in which two such models synchronize with intermodel connections only between medium-scale components of the flow; here the connections are trained against a third “real” model. Intermittent blocking patterns characterize the critical behavior thus obtained, even where such patterns are missing in the constituent models. In the ECHAM-based climate supermodel, the corresponding critical structure is the single ITCZ pattern, a pattern that occurs in neither of the constituent models. In conclusion, for supermodels of both types, power spectra indicate enhanced interscale interactions in frequency or energy ranges of physical interest, in agreement with observed data, and supporting a generalized form of the self-organized criticality hypothesis.

54 ENVIRONMENTAL SCIENCES↗

The Search for Missing Resonances: the Neutron Anomaly

We report the observation of a narrow structure in the invariant mass spectrum of the {eta}-neutron pairs produced in the reaction {gamma}d{yields}{eta}n(p) which is absent in the {eta}-proton pairs produced in the reaction {gamma}d{yields}{eta}p(n). These results are obtained from a liquid deuterium target, the data sample was collected with the Crystal Barrel and TAPS detectors at the electron accelerator ELSA. This structure is also seen in preliminary analyses of the data samples taken by the Crystal Ball and TAPS detectors at the electron accelerator MAMI with a liquid deuterium target and a liquid helium 3 target ruling out a nuclear effect. We report the measurements of the position and width of this narrow structure in the invariant mass spectrum at W{approx_equal}1665 MeV and with a FWHM of {Gamma} = 25 MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Updated Radiological Inventory of G1 Reactor Thanks to a Strengthened Data Processing - 17271

The radiological inventory of G1 reactor is under refinement and consolidation. This reactor, located at the CEA Marcoule center in France, presents an issue for Chlorine-36 as graphite was used as moderator. The improvement of the 3D physical description and a better understanding of historical events enable the computation of activation levels thanks to a numerical model. These results are compared to old samples and more recent ones to quantify nuclide activity levels as well as their spatial distributions. In particular a spatial and statistical correction of sample bias leads to an update of the radiological inventory with an expected reduction of average activity levels. Another part of the work consists in identifying missing pieces of information and still uncertain parts of the reactor (sample analysis of activated concrete for instance) to reinforce the radiological inventory of G1 reactor. This will be the basis of future investigation works. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Searches for W′ bosons decaying to a top quark and a bottom quark in proton-proton collisions at 13 TeV

Searches are presented for heavy gauge bosons decaying into a top and a bottom quark in data collected by the CMS experiment at $ \sqrt{s}=13 $ TeV that correspond to an integrated luminosity of 2.2 and 2.6 fb$^{−1}$ in the leptonic and hadronic analyses, respectively. Two final states are analyzed, one containing a single electron, or muon, and missing transverse momentum, and the other containing multiple jets and no electrons or muons. No evidence is found for a right-handed W′ boson (W′$_{R}$) and the combined analyses exclude at 95% confidence level W′$_{R}$ with masses below 2.4 TeV if $ {M}_{\mathrm{W}{\prime}_{\mathrm{R}}}\gg {M}_{\nu_{\mathrm{R}}} $ (mass of the right-handed neutrino), and below 2.6 TeV if $ {M}_{\mathrm{W}{\prime}_{\mathrm{R}}}<{M}_{\nu_{\mathrm{R}}} $ . The results provide the most stringent limits for right-handed W′ bosons in the top and bottom quark decay channel.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

GUT and supersymmetry at the LHC and in dark matter

Conventional SO(10) models involve more than one scale for a complete breaking of the GUT symmetry requiring further assumptions on the VEVs of the Higgs fields that enter in the breaking to achieve viable models. Recent works where the breaking can be accomplished at one scale are discussed. These include models with just a pair of 144+144 of Higgs fields. Further extensions of this idea utilizing 560+560 of Higgs representations allow both the breaking at one scale, as well as accomplish a natural doublet-triplet splitting via the missing partner mechanism. More generally, we discuss the connection of high scale models to low energy physics in the context of supergravity grand unification. Here we discuss a natural solution to the little hierarchy problem and also discuss the implications of the LHC data for supersymmetry. It is shown that the LHC data implies that most of the parameter space of supergravity models consistent with the data lie on the Hyperbolic Branch of radiative breaking of the electroweak symmetry and more specifically on the Focal Surface of the Hyperbolic Branch. A discussion is also given of the implications of recent LHC data on the Higgs boson mass for the discovery of supersymmetry and for the search for dark matter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

XMM-NEWTON OBSERVATIONS OF A COMPLETE SAMPLE OF OPTICALLY SELECTED TYPE 2 SEYFERT GALAXIES

The majority of active galactic nuclei (AGNs) suffer from significant obscuration by surrounding dust and gas. The penetrating power and sensitivity of hard X-ray observations allow obscured AGNs to be probed out to high redshifts. However, X-ray surveys in the 2-10 keV band will miss the most heavily obscured AGNs in which the absorbing column density exceeds approx10{sup 24} cm{sup -2} (the Compton-thick AGN). It is, therefore, vital to know the fraction of AGNs that are missed in such X-ray surveys and to determine if these AGNs represent some distinct population in terms of the fundamental properties of AGNs and/or their host galaxies. In this paper, we present the analysis of XMM-Newton X-ray data for a complete sample of 17 low-redshift Type 2 Seyfert galaxies chosen from the Sloan Digital Sky Survey based solely on the high observed flux of the [O III]lambda5007 emission line. This line is formed in the narrow-line region hundreds of parsecs away from the central engine. Thus, unlike the X-ray emission, it is not affected by obscuration due to the torus surrounding the black hole. It therefore provides a useful isotropic indicator of the AGN luminosity. As additional indicators of the intrinsic AGN luminosity, we use the Spitzer Space Telescope to measure the luminosities of the mid-infrared continuum and the [O IV] 25.89 mum narrow emission line. We then use the ratio of the 2-10 keV X-ray luminosity to the [O III], [O IV], and mid-infrared luminosities to assess the amount of X-ray obscuration and to distinguish between Compton-thick and Compton-thin objects. The various diagnostics of AGN luminosity with heavily obscured hard X-ray emission are in broad agreement. We find that the majority of the sources suffer significant amounts of obscuration: the observed 2-10 keV emission is depressed by more than an order of magnitude in 11 of the 17 cases (as expected for Compton-thick sources). Thus, surveys in the rest-frame 2-10 keV band will be significantly incomplete for obscured AGNs. We find a strong inverse correlation between the ratio of the 2-10 keV X-ray and [O III] (or [O IV] or mid-IR) fluxes and the equivalent width of the 6.4 keV Fe Kalpha line. This demonstrates that the weak hard X-ray continuum emission is due to obscuration (rather than due to intrinsically weak emission). In several cases, the large amount of obscuration is not consistent with the values of absorbing column density derived from simple spectral fits to the data. We run simulations of a more physically realistic model with partial covering of the X-ray source plus Compton scattering, and show that such models are consistent with the data. We show that the distribution of obscuration in the 2-10 keV band in our sample is similar to what is seen in samples selected in the Swift BAT energy band (14-195 keV). This implies that the BAT surveys do recover a significant fraction of the local population of Compton-thick AGNs. Finally, we find no relationship between the amount of X-ray obscuration and the other properties of the AGN and its host galaxy. Hence, Compton-thick and Compton-thin sources do not seem to trace distinct populations.

79 ASTRONOMY AND ASTROPHYSICS↗

Redshifts of radio sources in the Million Quasars Catalogue from machine learning

ABSTRACT With the aim of using machine learning techniques to obtain photometric redshifts based upon a source’s radio spectrum alone, we have extracted the radio sources from the Million Quasars Catalogue. Of these, 44 119 have a spectroscopic redshift, required for model validation, and for which photometry could be obtained. Using the radio spectral properties as features, we fail to find a model which can reliably predict the redshifts, although there is the suggestion that the models improve with the size of the training sample. Using the near-infrared–optical–ultraviolet bands magnitudes, we obtain reliable predictions based on the 12 503 radio sources which have all of the required photometry. From the 80:20 training–validation split, this gives only 2501 validation sources, although training the sample upon our previous SDSS model gives comparable results for all 12 503 sources. This makes us confident that SkyMapper, which will survey southern sky in the u, v, g, r, i, z bands, can be used to predict the redshifts of radio sources detected with the Square Kilometre Array. By using machine learning to impute the magnitudes missing from much of the sample, we can predict the redshifts for 32 698 sources, an increase from 28 to 74 per cent of the sample, at the cost of increasing the outlier fraction by a factor of 1.4. While the ‘optical’ band data prove successful, at this stage we cannot rule out the possibility of a radio photometric redshift, given sufficient data which may be necessary to overcome the relatively featureless radio spectra.

79 ASTRONOMY AND ASTROPHYSICS↗