SEARCH · Search NASA

Results for “surface additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Effect of long-term exposure to Low Earth Orbit (LEO) space environment

Data obtained from components and materials from the Solar Maximum Mission satellite are presented and compared to data for similar materials obtained from the Advanced Composite Materials Exposure to Space Experiment (ACOMEX) flown on Shuttle mission STS-41G. In addition to evaluation of surface erosion and mass loss that may be of importance to very long-term missions, comparisons of solar absorptance and thermal emittance measurements for both long and short term exposures were made. Although the ratio of absorptance over emittance can be altered by proper choice of materials to ensure a proper operating environment for the spacecraft, once the thermal design is established, it is important that the material properties not change in order to maintain the operating environment for many payload and bus items such as electronics, batteries, fuel, etc. However, data presented show significant changes after short exposure in low Earth environment. Moreover, the measured changes are shown to differ according to the manner of exposure, i.e., normal or oblique, which also affects the resultant eroded surface morphology. These results identify constraints to be considered in development of flight experiments or laboratory testing.

Zimcik, D. G.↗

NASA NTRS1987

AIS-2 spectra of California wetland vegetation

Spectral data gathered by Airborne Imaging Spectrometers-2 from wetlands were analyzed. Spectra representing stands of green Salicornia virginica, green Sesuvium verrucosum, senescing Distichlis spicata, a mixture of senescing Scirpus acutus and Scirpus californicus, senescing Scirpus paludosus, senescent S. paludosus, mowed senescent S. paludosus, and soil were isolated. No difference among narrowband spectral reflectance of the cover types was apparent between 0.8 to 1.6 micron. There were, however, broadband differences in brightness. These differences were sufficient to permit a fairly accurate decomposition of the image into its major cover type components using a procedure that assumes an additive linear mixture of surface spectra.

Gross, Michael F.↗

NASA NTRS1992

High-frequency techniques for RCS prediction of plate geometries

Given here are hard polarization diffraction coefficients for the special case of a wedge that is coated with a lossy dielectric on one face and is perfectly conducting on the other face. Expressions for plane-wave incidence, far-field observation; for cylindrical-wave incidence, far-field observation; and for plane-wave incidence, near-field observation are presented for regular diffractions. In addition, terms for surface-wave and surface-wave transition fields are presented. These expressions are derived from the Uniform Theory of Diffraction (UTD) coefficients for a generalized impedance wedge and are simplified for rapid calculation for the case of one perfectly conducting face. Results from a first-order model for a coated, rectangular plate are examined; and potential problems in extending this modeling approach to more complicated coated structures are identified.

Balanis, Constantine A.↗

NASA NTRS1992

Development of 3D electromagnetic modeling tools for airborne vehicles

The main goal of this project is to develop methodologies for scattering by airborne composite vehicles. Although our primary focus continues to be the development of a general purpose code for analyzing the entire structure as a single unit, a number of other tasks are also pursued in parallel with this effort. These tasks are important in testing the overall approach and in developing suitable models for materials coatings, junctions and, more generally, in assessing the effectiveness of the various parts comprising the final code. Here, we briefly discuss our progress on the five different tasks which were pursued during this period. Our progress on each of these tasks is described in the detailed reports (listed at the end of this report) and the memoranda included. The first task described below is, of course, the core of this project and deals with the development of the overall code. Undoubtedly, it is the outcome of the research which was funded by NASA-Ames and the Navy over the past three years. During this year we developed the first finite element code for scattering by structures of arbitrary shape and composition. The code employs a new absorbing boundary condition which allows termination of the finite element mesh only 0.3 lambda from the outer surface of the target. This leads to a remarkable reduction of the mesh size and is a unique feature of the code. Other unique features of this code include capabilities to model resistive sheets, impedance sheets and anisotropic materials. This last capability is the latest feature of the code and is still under development. The code has been extensively validated for a number of composite geometries and some examples are given. The validation of the code is still in progress for anisotropic and larger non-metallic geometries and cavities. The developed finite element code is based on a Galerkin's formulation and employs edge-based tetrahedral elements for discretizing the dielectric sections and the region between the target and the outer mesh termination boundary (ATB). This boundary is placed in conformity with the target's outer surface, thus resulting in additional reduction of the unknown count.

Volakis, John L.↗

NASA NTRS1992

Synergism of He-3 acquisition with lunar base evolution

Researchers have discovered that the lunar surface contains a valuable fusion fuel element that is relatively scarce on Earth. This element, He-3, originates from the solar wind that has bombarded the surface of the Moon over geologic time. Mining operations to recover this resource would allow the by-product acquisition of hydrogen, water, carbon dioxide, carbon monoxide, methane, and nitrogen from the lunar surface with relatively minimal additional resource investment when compared to the costs to supply these resources from Earth. Two configurations for the He-3 mining system are discussed, and the impacts of these mining operations on a projected lunar base scenario are assessed. We conclude that the acquisition of He-3 is feasible with minimal advances in current state-of-the-art technologies and could support a terrestrial nuclear fusion power economy with the lowest hazard risk of any nuclear reaction known. Also, the availability of the by-products of He-3 acquisition from the Moon could significantly reduce the operational requirements of a lunar base and increase the commercialization potential of the base through consumable resupply of the lunar base itself, other components of the space infrastructure, and other space missions.

Crabb, T. M.↗

NASA NTRS1990

Analysis of AVHRR, CZCS and historical in situ data off the Oregon Coast

The original scientific objectives of this grant were to: (1) characterize the seasonal cycles and interannual variability for phytoplankton concentrations and sea surface temperature (SST) in the California Current using satellite data; and (2) to explore the spatial and temporal relationship between these variables and surface wind forcing. An additional methodological objective was to develop statistical methods for forming mean fields, which minimize the effects of random data gaps and errors in the irregularly sampled CZCS (Coastal Zone Color Scanner) and AVHRR (Advanced Very High Resolution Radiometer) satellite data. A final task was to evaluate the level of uncertainty in the wind fields used for the statistical analysis. Funding in the first year included part of the cost of an image processing system to enable this and other projects to process and analyze satellite data. This report consists of summaries of the major projects carried out with all or partial support from this grant. The appendices include a list of papers and professional presentations supported by the grant, as well as reprints of the major papers and reports.

Strub, P. Ted↗

NASA NTRS1993

Wind-tunnel free-flight investigation of a supersonic persistence fighter

Wind-tunnel free-flight tests have been conducted in the Langley 30- by 60-Foot Wind Tunnel to examine the high-angle-of-attack stability and control characteristics and control law design of a supersonic persistence fighter (SSPF) at 1 g flight conditions. In addition to conventional control surfaces, the SSPF incorporated deflectable wingtips (tiperons) and pitch and yaw thrust vectoring. A direct eigenstructure assignment technique was used to design control laws to provide good flying characteristics well into the poststall angle-of-attack region. Free-flight tests indicated that it was possible to blend effectively conventional and unconventional control surfaces to achieve good flying characteristics well into the poststall angle-of-attack region.

Hahne, David E.↗

NASA NTRS1992

HSCT mission analysis of waverider designs

In the second quarter the development of the two waverider design tools was continued, and the groundwork necessary for the incorporation of waverider technology into the realm of the High Speed Civil Transports (HSCT's) was laid out. Advances in each of these areas is summarized. Work on the WIPAR code included the addition of an upper surface geometry generator and characteristic flow solver and the inclusion of viscous analysis in the performance computations. Details of these changes are given. In the course of the second project quarter, much of the analysis performed during the first quarter was incorporated into a working computer code. To date, utilities were developed for the definition of arbitrary 3-D shock surfaces, the computation of post-shock flow conditions, and the marching of the solution in a roughly cross-stream direction away from the shock surface. These utilities are briefly described. During the second quarter groundwork for the analysis of complete configurations was initiated. This involved the development of computational utilities for the integration of powerplants with the waverider forebodies, and the acquisition of a number of configuration analysis software packages. Work in these areas is discussed.

Source record↗

NASA NTRS1947

Wind-tunnel investigation of the effect of power and flaps on the static lateral characteristics of a single-engine low-wing airplane model

Tests were made in the Langley 7- by 10-foot tunnel to determine the lateral-stability characteristics with and without power of a model of a typical low-wing single-engine airplane with flaps neutral, with a full-span single slotted flap, and with a full-span double slotted flap. Power decreased the dihedral effect regardless of flap condition, and the double-slotted flap configuration showed the most marked decrease. The usual effect of power in increasing the directional stability was also shown. Deflection of the single slotted flap produced negative dihedral effect, but increased the directional stability. The effects of deflecting the double slotted flap were erratic and marked changes in both effective dihedral and directional stability occurred. The addition of the tail surfaces always contributed directional stability and generally produced positive dihedral effect.

Tamburello, Vito↗

NASA NTRS1993

The pH of Mars

The Viking labeled release (LR) experiments provided data that can be used to determine the acid-base characteristics of the regolith. Constraints on the acid-base properties and redox potentials of the Martian surface material would provide additional information for determining what reactions are possible and defining formation conditions for the regolith. Calculations devised to determine the pH of Mars must include the amount of soluble acid species or base species present in the LR regolith sample and the solubility product of the carbonate with the limiting solubility. This analysis shows that CaCO3, either as calcite or aragonite, has the correct K(sub sp) to have produced the Viking LR successive injection reabsorption effects. Thus CaCO3 or another MeCO3 with very similar solubility characteristics must have been present on Mars. A small amount of soluble acid, but no more than 4 micro-mol per sample, could also have been present. It is concluded that the pH of the regolith is 7.2 +/- 0.1.

Plumb, R. C.↗

NASA NTRS1996

Planetary Boundary Layer Simulation Using TASS

Boundary conditions to an existing large-eddy simulation model have been changed in order to simulate turbulence in the atmospheric boundary layer. Several options are now available, including the use of a surface energy balance. In addition, we compare convective boundary layer simulations with the Wangara and Minnesota field experiments as well as with other model results. We find excellent agreement of modelled mean profiles of wind and temperature with observations and good agreement for velocity variances. Neutral boundary simulation results are compared with theory and with previously used models. Agreement with theory is reasonable, while agreement with previous models is excellent.

Schowalter, David G.↗

NASA NTRS1994

Experiment K-7-29: Connective Tissue Studies: Changes in Muscle Serine Proteases, Serpins and Matrix Molecules - Part 2

In zero or micro-gravity, type 1 muscle fibers atrophy and lose predominance, especially in slow-twitch muscles. No increase in mononuclear cells has been observed, just as in simple denervation, where both types 1 and 2 fibers atrophy, again without infiltration of cells, but with clear satellite cell proliferation. However, extracellular matrix (ECM) degradation takes place after denervation and if re-innervation is encouraged, functional recovery to near control levels may be achieved. No information is available concerning the ECM milieu, the activation of serine proteases, their efficacy in degrading ECM components and the production of locally-derived natural protease inhibitors (serpins) in effecting surface proteolytic control. In addition, no studies are available concerning the activation of these enzymes in micro- or zero gravity or their response to muscle injury on the ground and what alterations, if any, occur in space. These studies were the basis for the experiments in Cosmos 2044.

Festoff, B. W.↗

NASA NTRS1993

The Achievement of Near-Theoretical-Minimum Contact Resistance to InP

We have investigated the electrical and metallurgical behavior of the InP/Au/Ni contact system. We show that when a layer of Au, 100 A or more in thickness, is introduced between n-InP and Ni contact metallization, specific contact resistivity R, values in the low 10(exp -8) Omega cm(exp 2) range are achieved after sintering. It is suggested that these ultralow values of R(sub c) are due to the presence, at the metal-InP interface, of a Ni3P layer combined with a stoichiometry change in the InP surface. We show, in addition, that it is possible to achieve very low R(sub c) values with this system without incurring device destroying sinter-induced metallurgical interdiffusion.

Fatemi, Navid S.↗

NASA NTRS1999

Observations of Land Surface Variability Using Passive Microwave Sensing

Understanding the global variability of land surface wetness (soil moisture), skin temperature, and related surface fluxes of heat and moisture is key to assessing the importance of the land surface in influencing climate. The feasibility of producing model estimates of these quantities is being studied as part of the International Satellite Land Surface Climatology Project (ISLSCP) Global Soil Wetness Project (GSWP). In the GSWP approach, meteorological observations and analyses are used to drive global circulation models. Satellite measurements can provide independent estimates of key land surface parameters that are needed for initializing and validating the climate models and for monitoring long-term change. Satellite observations of the land surface can also be assimilated into soil models to estimate moisture in the root zone. In our research, passive microwave satellite data recorded during 1978-1987 from the Nimbus-7 Scanning Multichannel Microwave Radiometer (SMMR) are being used to examine spatial and temporal trends in surface soil moisture, vegetation, and temperature. These data include observations at C and X bands (6.6 and 10.7 GHz), which are not available on the current Special Sensor Microwave/Imager (SSM/I) and are precursors to data that will become available from the Advanced Microwave Scanning Radiometer (AMSR) on Advanced Earth Observing Satellite (ADEOS-II) and Earth Observing System (EOS) PM1 in the year 2000. A chart shows a time-series of SMMR-derived surface temperature, T-e and surface soil moisture M, retrieved on a 0.5 deg x 0.5 deg grid and further averaged over a 4 deg x 10 deg study region in the African Sahel. Also shown are National Center for Environmental Prediction (NCEP) model outputs of surface temperature, T-sfc, and soil wetness, Soil-w. The variables have been scaled to have similar dynamic ranges on the plots. The NCEP data from the NCEP Reanalysis Project are monthly averages on a 2.5 deg x 2.5 deg grid averaged over the 4 deg x 10 deg study area. Comparisons of SMMR retrievals with forecast model output show the potential of the satellite data for validating model output and monitoring long-term trends. Continuing work will extend these results to other regions to validate the retrievals more quantitatively. In preparation for the launch of AMSR, field experiments are planned in collaboration with the Global Energy and Water Cycle Experiment (GEWEX) Coordinated Enhanced Observing Period (CEOP) experiments to evaluate the satellite-derived soil moisture measurements and to demonstrate their usefulness for land surface hydrology and climate. Additional information is contained in the original.

Njoku, Eni G.↗

NASA NTRS1995

Determination of Eros Physical Parameters for Near Earth Asteroid Rendezvous Orbit Phase Navigation

Navigation of the orbit phase of the Near Earth steroid Rendezvous (NEAR) mission will re,quire determination of certain physical parameters describing the size, shape, gravity field, attitude and inertial properties of Eros. Prior to launch, little was known about Eros except for its orbit which could be determined with high precision from ground based telescope observations. Radar bounce and light curve data provided a rough estimate of Eros shape and a fairly good estimate of the pole, prime meridian and spin rate. However, the determination of the NEAR spacecraft orbit requires a high precision model of Eros's physical parameters and the ground based data provides only marginal a priori information. Eros is the principal source of perturbations of the spacecraft's trajectory and the principal source of data for determining the orbit. The initial orbit determination strategy is therefore concerned with developing a precise model of Eros. The original plan for Eros orbital operations was to execute a series of rendezvous burns beginning on December 20,1998 and insert into a close Eros orbit in January 1999. As a result of an unplanned termination of the rendezvous burn on December 20, 1998, the NEAR spacecraft continued on its high velocity approach trajectory and passed within 3900 km of Eros on December 23, 1998. The planned rendezvous burn was delayed until January 3, 1999 which resulted in the spacecraft being placed on a trajectory that slowly returns to Eros with a subsequent delay of close Eros orbital operations until February 2001. The flyby of Eros provided a brief glimpse and allowed for a crude estimate of the pole, prime meridian and mass of Eros. More importantly for navigation, orbit determination software was executed in the landmark tracking mode to determine the spacecraft orbit and a preliminary shape and landmark data base has been obtained. The flyby also provided an opportunity to test orbit determination operational procedures that will be used in February of 2001. The initial attitude and spin rate of Eros, as well as estimates of reference landmark locations, are obtained from images of the asteroid. These initial estimates are used as a priori values for a more precise refinement of these parameters by the orbit determination software which combines optical measurements with Doppler tracking data to obtain solutions for the required parameters. As the spacecraft is maneuvered; closer to the asteroid, estimates of spacecraft state, asteroid attitude, solar pressure, landmark locations and Eros physical parameters including mass, moments of inertia and gravity harmonics are determined with increasing precision. The determination of the elements of the inertia tensor of the asteroid is critical to spacecraft orbit determination and prediction of the asteroid attitude. The moments of inertia about the principal axes are also of scientific interest since they provide some insight into the internal mass distribution. Determination of the principal axes moments of inertia will depend on observing free precession in the asteroid's attitude dynamics. Gravity harmonics are in themselves of interest to science. When compared with the asteroid shape, some insight may be obtained into Eros' internal structure. The location of the center of mass derived from the first degree harmonic coefficients give a direct indication of overall mass distribution. The second degree harmonic coefficients relate to the radial distribution of mass. Higher degree harmonics may be compared with surface features to gain additional insight into mass distribution. In this paper, estimates of Eros physical parameters obtained from the December 23,1998 flyby will be presented. This new knowledge will be applied to simplification of Eros orbital operations in February of 2001. The resulting revision to the orbit determination strategy will also be discussed.

Miller, J. K.↗

NASA NTRS2000

Asbestos Free Insulation Development for the Space Shuttle Solid Propellant Rocket Motor (RSRM)

Asbestos has been used for many years as an ablation inhibitor in insulating materials. It has been a constituent of the AS/NBR insulation used to protect the steel case of the RSRM (Reusable Solid Rocket Motor) since its inception. This paper discusses the development of a potential replacement RSRM insulation design, several of the numerous design issues that were worked and processing problems that were resolved. The earlier design demonstration on FSM-5 (Flight Support Motor) of the selected 7% and 11% Kevlar(registered) filled EPDM (KF/EPDM) candidate materials was expanded. Full-scale process simulation articles were built and FSM-8 was manufactured using multiple Asbestos Free (AF) components and materials. Two major problems had to be overcome in developing the AF design. First, bondline corrosion, which occurred in the double-cured region of the aft dome, had to be eliminated. Second, KF/EPDM creates high levels of electrostatic energy (ESE), which does not readily dissipate from the insulation surface. An uncontrolled electrostatic discharge (ESD) of this surface energy during many phases of production could create serious safety hazards. Numerous processing changes were implemented and a conductive paint was developed to prevent exposed external insulation surfaces from generating ESE/ESD. Additionally, special internal instrumentation was incorporated into FSM-8 to record real-time internal motor environment data. These data included inhibitor insulation erosion rates and internal thermal environments. The FSM-8 static test was successfully conducted in February 2000 and much valuable data were obtained to characterize the AF insulation design.

Allred, Larry D.↗

NASA NTRS2001

Petit Grand Tour: Mission Concepts to Outer Planet Satellites Using Non-Conic Low Energy Trajectories

Our Solar System is connected by a vast Interplanetary Superhighway System (ISSys) providing low energy transport throughout. The Outer Planets with their satellites and rings are smaller replicas of the Solar System with their own ISSys, also providing low energy transport within their own satellite systems. This low energy transport system is generated by all of the Lagrange points of the planets and satellites within the Solar System. Figures show the tubular passage-ways near L1 of Jupiter and the ISSys of Jupiter schematically. These delicate and resilient dynamics may be used to great effect to produce free temporary captures of a spacecraft by a planet or satellite, low energy interplanetary and inter-satellite transfers, as well as precision impact orbits onto the surface of the satellites. Additional information is contained in the original extended abstract.

Lo, M. W.↗

NASA NTRS2001

Dust Particle Charging near Surfaces in Space

Dust dynamics, as observed on the lunar surface, are thought to be due to the interaction between charged dust and a photoelectron sheath above the surface. We perform experiments on the charging and dynamics of dust near a surface having a sheath Additional information is contained in the original extended abstract.

Sickafoose, A. A.↗