Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Theoretical Investigation of the Structural Stabilities of Ceria Surfaces and Supported Metal Nanocluster in Vapor and Aqueous Phases

Understanding the structural stability and dynamics at the interface between the solid metal oxide and aqueous phase is significant in a variety of industrial applications including heterogeneous catalysis and environmental remediation. In the present work, the stabilities of three low-index ceria (CeO2) surfaces, i.e., (111), (110) and (100) in vapor and aqueous phases were studied using ab initio molecular dynamics simulations and density functional theory (DFT) calculations. Gibbs surface free energies as a function of temperature, water partial pressure, and water coverages were calculated using DFT based atomistic thermodynamic approach. On the basis of surface free energies, the morphology and exposed surface structures of the CeO2 nanoparticle were predicted using Wulff construction principle. It is found that the partially hydroxylated (111) and (100) are two major surface structures of CeO2 nanoparticles in vapor phase at ambient temperature (300 K). As the temperature increases, the fully dehydrated (111) surface gradually becomes the most dominant surface structure. While in aqueous phase, the exposed surface of the CeO2 nanoparticle is dominated by the hydroxylated (110) structure at 393 K. Finally, the morphology and stability of a cuboctahedron Pt13 nanocluster supported on CeO2 surfaces in both gas and aqueous phases were investigated. In gas phase, the supported Pt13 nanocluster has the tendency to wetting the CeO2 surface due to the strong metal-support interaction. The calculated interaction energies suggest the CeO2(110) surface provides the best stability for the Pt13 nanocluster. The CeO2 supported Pt13 nanoclusters are oxidized. Compared to the gas phase, the morphology of the CeO2 supported Pt13 nanocluster is less distorted due to the solvation effect provided by surrounding water molecules in aqueous phase. More electrons are transferred from the Pt13 nanocluster to the CeO2 support, implying the supported Pt13 nanocluster is further oxidized in aqueous phase.

ab initio molecular dynamics simulation↗

Surface Enthalpies of Nanophase ZnO with Different Morphologies

A direct calorimetric measurement of the dependence of the surface enthalpy of nanophase ZnO on morphology is reported. Nanoparticles, nanoporous composites, nanorods, and nanotetrapods were prepared with various sizes and their surface enthalpies were derived from their drop solution enthalpies in molten sodium molybdate. Water adsorption calorimetry for nanoparticles and nanorods was carried out to characterize the stabilization effect of surface hydration. The surface enthalpies of hydrated surfaces for nanoparticles, nanoporous composites, nanorods and nanotetrapods are 1.31±0.07, 1.42±0.21, 5.19±0.56, and 5.77±2.50 J/m2, respectively, while those of the anhydrous surfaces are 2.55±0.23, 2.74±0.16, 6.67±0.56, and 7.28±2.50 J/m2. The surface enthalpies of nanoparticles are the same as those of nanoporous composites, and are much lower than those of nanorods and nanotetrapods, which are also close to each other. The dependence of surface enthalpy on morphology is discussed in terms of exposed surface structures. This is the first time that calorimetry on nanocrystalline powders bas been able to detect differences in surface energetics of materials having different morphologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactive Ballistic Deposition of Nanostructured Model Materials for Electrochemical Energy Conversion and Storage

Finely structured, supported thin films offer a host of opportunities for fundamental and applied research. Nanostructured materials often exhibit physical properties which differ from their bulk counterparts due to the increased importance of the surface in determining the thermodynamics and behavior of the system. Thus, control of the characteristic size, porosity, morphology, and surface area presents opportunities to tailor new materials which are useful platforms for elucidating the fundamental processes related to energy conversion and storage. The ability to produce high purity materials with direct control of relevant film parameters such as porosity, film thickness, and film morphology is of immediate interest in the fields of electrochemistry, photocatalysis, and thermal catalysis. Studies of various photoactive materials have introduced questions concerning the effects of film architecture and surface structure on the performance of the materials, while recent work has demonstrated that nanostructured, mesoporous, or disordered materials often deform plastically, making them robust in applications where volumetric expansion and phase transformations occur, such as in materials for lithium-ion batteries. Moreover, renewed emphasis has been placed on the formation of semi-conductive electrodes with controlled pore-size and large surface areas for the study and application of pseudo-capacitance and cation insertion processes for electrical energy storage. Understanding how the performance of such materials depends on morphology, porosity, and surface structure and area requires a synthesis technique which provides for incremental variations in structure and facilitates assessment of the performance with the appropriate analytical tools, preferably those that provide both structural information and kinetic insight into photoelectrochemical processes.

30 DIRECT ENERGY CONVERSION↗

Nanoporous Gold as a Neural Interface Coating: Effects of Topography, Surface Chemistry, and Feature Size

We report that designing neural interfaces that maintain close physical coupling of neurons to an electrode surface remains a major challenge for both implantable and in vitro neural recording electrode arrays. Typically, low-impedance nanostructured electrode coatings rely on chemical cues from pharmaceuticals or surface-immobilized peptides to suppress glial scar tissue formation over the electrode surface (astrogliosis), which is an obstacle to reliable neuron–electrode coupling. Nanoporous gold (np-Au), produced by an alloy corrosion process, is a promising candidate to reduce astrogliosis solely through topography by taking advantage of its tunable length scale. In the present in vitro study on np-Au’s interaction with cortical neuron–glia co-cultures, we demonstrate that the nanostructure of np-Au achieves close physical coupling of neurons by maintaining a high neuron-to-astrocyte surface coverage ratio. Atomic layer deposition-based surface modification was employed to decouple the effect of morphology from surface chemistry. Additionally, length scale effects were systematically studied by controlling the characteristic feature size of np-Au through variations in the dealloying conditions. In conclusion, our results show that np-Au nanotopography, not surface chemistry, reduces astrocyte surface coverage while maintaining high neuronal coverage and may enhance neuron–electrode coupling through nanostructure-mediated suppression of scar tissue formation.

36 MATERIALS SCIENCE↗

Tomography and High-Resolution Electron Microscopy Study of Surfaces and Porosity in a Plate-Like γ-Al 2 O 3

Morphological and surface characteristics of gamma-Al 2 O 3 are topics of high relevance in the field of catalysis. Using tomography and high-resolution S/TEM imaging, we have studied the surface characteristics of a model gamma-Al 2 O 3 synthesized in the shape of platelets and macroscopically defined by (110)Al 2 O 3 and (111)Al 2 O 3 surface facets. We show that the dominant (110)Al 2 O 3 surface of the synthesized gamma-Al 2 O 3 is not atomically flat but undergoes a significant reconstruction, forming nanoscale (111)Al 2 O 3 terraces. In addition to high resolution imaging, tomographic analysis was carried out, enabling an examination of the pores/voids, which were found to be mostly enclosed within the bulk and inaccessible to gasses or metals. Tomographic analysis shows that the surfaces of the pores are defined exclusively by (100)Al 2 O 3 and (111)Al 2 O 3 facets. The importance of these findings is discussed in the context of relative surface energies of low index surfaces and ethanol desorption characteristics.

Environmental Molecular Sciences Laboratory↗

Thermodynamic and Kinetic Roles of H2 in Structure Evolution of Urchin-like Co: A density functional theory study

Small gas molecules working as good capping agents play important roles in controlling the morphologies and surface structures of the metal nanocrystals. In present work, the thermodynamic and kinetic roles of H2 molecule played on the morphology of Co nanocrystal were systematically studied based on density functional theory (DFT). The Gibbs surface free energies (?) of Co(100), Co(110) and Co(111) under different hydrogen surface coverages were investigated by ab initio thermodynamics, based on which i) the phase diagrams of stable H coverage on each plane were obtained; ii) the morphology evolutions of the Co nanocrystals with various surface hydrogen coverages were further predicted by Wulff construction. It was revealed that addition of H2 could change the facet stability generating diverse morphological Co nucleus. The kinetic role of H2 was further explored by DFT during adatom Co surface diffusions under different H coverages (?H), which suggested that except for Co(100) at ?H of 0.56 ML, the surface H would hinder Co surface diffusions. The projected density of state (PDOS) gave a deeper insight that the electronic structures of the Co adatom could be alerted by addition of the surface H, which thereby affected its surface diffusion ability. X. Wang, N. Liu, Q. Zhang, X. Liang, and B. Chen were financially supported by the National Natural Science Foundation of China (No. 21476012, 21571012, and 91534201). D. Mei was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. Computing time was granted by the facility user proposal grand challenge of computational catalysis of the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL). EMSL is a national scientific user facility located at Pacific Northwest National Laboratory (PNNL) and sponsored by DOE’s Office of Biological and Environmental Research.

Nanocrystal Co, Surface free energy, Surface diffu↗

Hydration kinetics and morphology of cement pastes with pozzolanic volcanic ash studied via synchrotron-based techniques

Here, this study investigates the early ages of hydration behavior when basaltic volcanic ash was used as a partial substitute to ordinary Portland cement using ultra-small-angle X-ray scattering and wide-angle X-ray scattering (WAXS). The mix design consisted of 10, 30 and 50% substitution of Portland cement with two different-sized volcanic ashes. The data showed that substitution of volcanic ash above 30% results in excess unreacted volcanic ash, rather than additional pozzolanic reactions along longer length scales. WAXS studies revealed that addition of finely ground volcanic ash facilitated calcium-silicate-hydrate related phases, whereas inclusion of coarser volcanic ash caused domination by calcium-aluminum-silicate-hydrate and unreacted MgO phases, suggesting some volcanic ash remained unreacted throughout the hydration process. Addition of more than 30% volcanic ash leads to coarser morphology along with decreased surface area and higher intensity of scattering at early-age hydration. This suggests an abrupt dissolution indicated by changes in surface area due to the retarding gel formation that can have implication on early-age setting influencing the mechanical properties of the resulting cementitious matrix. The findings from this work show that the concentration of volcanic ash influences the specific surface area and morphology of hydration products during the early age of hydration. Therefore, natural pozzolanic volcanic ashes can be a viable substitute to Portland cement by providing environmental benefits in terms of lower-carbon footprint along with long-term durability.

36 MATERIALS SCIENCE↗

Effect of Microstructural Evolution on Wettability of Laser Coated Calcium Phosphate on Titanium Alloy

Surface engineering of synthetic implant materials provides an exciting opportunity to mimic natural biomaterials. Surface that are bioactive and textured at multi scale have the potential for easier osseointegration. Ti alloy surfaces known for their biocompatibility are coated with bioactive Calcium Phosphate using a laser source at multiple processing speeds. The resulting surface has multiscale morphology and multi-phase chemical nature. Faster processing speeds showed improved wettability to water along with higher degree of crystallinity in the phases present.

36 MATERIALS SCIENCE↗

Interaction of hydrogen with actinide dioxide (011) surfaces

The corrosion and oxidation of actinide metals, leading to the formation of metal-oxide surface layers with the catalytic evolution of hydrogen, impacts the management of nuclear materials. In this work, the interaction of hydrogen with actinide dioxide (AnO 2 , An = U, Np, or Pu) (011) surfaces by Hubbard corrected density functional theory (PBEsol+U) has been studied, including spin–orbit interactions and non-collinear 3k anti-ferromagnetic behavior. The actinide dioxides crystalize in the fluorite-type structure, and although the (111) surface dominates the crystal morphology, the (011) surface energetics may lead to more significant interaction with hydrogen. The dissociative adsorption of hydrogen on the UO 2 (0.44 eV), NpO 2 (-0.47 eV), and PuO 2 (-1.71 eV) (011) surfaces has been calculated. It is found that hydrogen dissociates on the PuO 2 (011) surface; however, UO 2 (011) and NpO 2 (011) surfaces are relatively inert. Recombination of hydrogen ions is likely to occur on the UO 2 (011) and NpO 2 (011) surfaces, whereas hydroxide formation is shown to occur on the PuO 2 (011) surface, which distorts the surface structure.

36 MATERIALS SCIENCE↗

Surface modification to prevent oxide scale spallation

A surface modification to prevent oxide scale spallation is disclosed. The surface modification includes a ferritic stainless steel substrate having a modified surface. A cross-section of the modified surface exhibits a periodic morphology. The periodic morphology does not exceed a critical buckling length, which is equivalent to the length of a wave attribute observed in the cross section periodic morphology. The modified surface can be created using at least one of the following processes: shot peening, surface blasting and surface grinding. A coating can be applied to the modified surface.

36 MATERIALS SCIENCE↗

Influence of ion-to-atom ratio on the microstructure of evaporated molybdenum thin films grown using low energy argon ions

The authors report the effect of argon ion to molybdenum atom ratio (r) on the microstructure of low energy (70 eV) argon ion assisted electron beam evaporated Mo thin films. Surface roughness, morphology, and crystallinity of Mo films are found to strongly depend on “r.” Increase of “r” from 0 to 100 induces gradual loss in crystallinity, reduction in surface roughness and systematic increase in density of the film. For “r” ∼ 100, average atomic density of the film approaches the bulk value (97%) with lowest surface roughness. Further, increasing “r” up to 170 reduces the atomic density, increases roughness, and increase in crystallinity induced by low energy Ar ion beam. The observed surface roughness and grain size determined by x-ray reflectivity and glancing incidence x-ray diffraction correlate well with atomic force microscopy measurements. This study demonstrates that for r = 100 one gets lowest roughness Mo film with highest density and nearly amorphous microstructure. The growth model is discussed by structural zone model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Morphology modification of gold nanoparticles from nanoshell to C-shape: Improved surface enhanced Raman scattering

Morphology modification of nanostructures is of great interest, because it can be used to fabricate nanostructures which are hard to be done using other methods. Different from traditional lithographic technique which is slow and expensive, morphology modification is easy, cheap, and reproducible. In this paper, modification of the optical and morphological properties of a hollow gold nanoshell (HGNS) is achieved by using H{sub 2}O{sub 2} as an oxidizer. The reshaping of these nanostructures has been demonstrated as a consequence of an oxidation process in which HGNSs are dissolved by H{sub 2}O{sub 2} under the acidic conditions provided by HCl. We investigate the oxidation process by a transmission electron microscope and propose a reshaping model involving four different shapes (HGNS, HGNS with hole, gold nanoring, and C-shaped gold nanoparticle) which are corresponding to the oxidation products of HGNSs at different pH values. Besides, the surface enhanced Raman scattering (SERS) activity of each oxidation product has been evaluated by using rhodamine 6G as the Raman active probe. It has been observed that the C-shaped gold nanoparticles which are corresponding to the oxidation products at the minimum pH value have the highest SERS activity and this result can also be interpreted by discrete-dipole approximation simulations. We demonstrate that the morphology modification of HGNSs becomes possible in a controlled manner using wet chemistry and can be used in preparation of gold nanoparticles such as HGNS with hole, gold nanoring, and C-shaped gold nanoparticle with large SERS activity. These nanostructures must have potential use in many plasmonic areas, including sensing, catalysis, and biomedicine.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE Award No. FG02-93ER14331 Final Technical Report

We have studyed new aspects of the relationships between nanoscale surface features and heterogeneous catalysis or electrocatalysis. We concentrate on atomically rough and morphologically unstable surfaces of catalytic metal single crystals (Re, Ru, Ir) that undergo nanoscale faceting when interacting with strongly adsorbed species (e.g. O, N, C) at elevated temperatures.

36 MATERIALS SCIENCE↗

Formation and characterization of perpendicular mode Si ripples by glancing angle O{sub 2}{sup +} sputtering at room temperature

Off-normal low energy ion beam sputtering of solid surfaces often leads to morphological instabilities resulting in the spontaneous formation of ripple structures in nanometer length scales. In the case of Si surfaces at ambient temperature, ripple formation is found to take place normally at lower incident angles with the wave vector parallel to the ion beam direction. The absence of ripple pattern on Si surface at larger angles is due to the dominance of ion beam polishing effect. We have shown that a gentle chemical roughening of the starting surface morphology can initiate ripple pattern under grazing incidence ion beam sputtering (theta>64 deg. with respect to the surface normal), where the ripple wave vector is perpendicular to the ion beam direction. The characteristics of the perpendicular mode ripples are studied as a function of pristine surface roughness (2-30 nm) and projectile fluence (5x10{sup 16}-1.5x10{sup 18} O atoms cm{sup -2}). The quality of the morphological structure is assessed from the analysis of ion induced topological defects.

36 MATERIALS SCIENCE↗

Influence of Short Central PEO Segment on Hydrolytic and Enzymatic Degradation of Triblock PCL Copolymers

Hydrolytic, enzymatic degradation and composting under controlled conditions of series of triblock PCL/PEO copolymers, PCEC, with central short PEO block (M{sub n} 400 g/mol) are presented and compared with homopolymer (PCL). The PCEC copolymers, synthesized via ring-opening polymerization of ε-caprolactone, were characterized by {sup 1}H NMR, quantitative {sup 13}C NMR, GPC, DSC and WAXS. The introduction of the PEO central segment (< 2 wt%) in PCL chains significantly affected thermal degradation and crystallization behavior, while the hydrophobicity was slightly reduced as confirmed by water absorption and moisture uptake experiments. Hydrolytic degradation studies in phosphate buffer after 8 weeks indicated a small weight loss, while FTIR analysis detected changes in crystallinity indexes and GPC measurements revealed bulk degradation. Enzymatic degradation tested by cell-free extracts containing Pseudomonas aeruginosa PAO1 confirmed high enzyme activity throughout the surface causing morphological changes detected by optical microscopy and AFM analysis. The changes in roughness of polymer films revealed surface erosion mechanism of enzymatic degradation. Copolymer with the highest content of PEO segment and the lowest molecular weight showed better degradation ability compared to PCL and other copolymers. Furthermore, composting of polymer films in a model compost system at 37 °C resulted in significant degradation of the all synthesized block copolymers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗