Search NASA⌕ Search

SEARCH · Search NASA

Results for “Behavior analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

High-resolution wall temperature measurements with distributed fiber optic sensors

Conventional approaches of surface temperature measurement are often unreliable, and other methods may not be practical in closed, high-temperature spaces. In this study, surface temperature measurements of the cooling panel of a natural circulation facility were performed with fiber optic distributed temperature sensors (DTS). High resolution surface temperature profiles of the cooling panel were acquired under two steady experimental conditions, and compared with measurements performed with nearby thermocouples. The total measurement error of the DTS results presented has been estimated to be ±4.4 °C. The findings reflected herein show that these DTS can reasonably measure surface temperature when installed with the methods developed in this study. Through the analysis of the DTS data collected, the interesting behavior of the cooling panel was revealed, providing new insights on the system's behavior that may be beneficial to the design and optimization of such heat transfer devices. These sensors can also provide the measurement density necessary for validation efforts with highly-resolved prediction methods such as finite element analysis (FEA) or computational fluid dynamics (CFD).

47 OTHER INSTRUMENTATION↗

Characterizing Machine Learning I/O Workloads on Leadership Scale HPC Systems

High performance computing (HPC) is no longer solely limited to traditional workloads such as simulation and modeling. With the increase in the popularity of machine learning (ML) and deep learning (DL) technologies, we are observing that an increasing number of HPC users are incorporating ML methods into their workflow and scientific discovery processes, across a wide spectrum of science domains such as biology, earth science, and physics. This gives rise to a diverse set of I/O patterns than the traditional checkpoint/restart-based HPC I/O behavior. The details of the I/O characteristics of such ML I/O workloads have not been studied extensively for large-scale leadership HPC systems. This paper aims to fill that gap by providing an in-depth analysis to gain an understanding of the I/O behavior of ML I/O workloads using darshan - an I/O characterization tool designed for lightweight tracing and profiling. We study the darshan logs of more than 23, 000 HPC ML I/O jobs over a time period of one year running on Summit - the second-fastest supercomputer in the world. This paper provides a systematic I/O characterization of ML I/O jobs running on a leadership scale supercomputer to understand how the I/O behavior differs across science domains and the scale of workloads, and analyze the usage of parallel file system and burst buffer by ML I/O workloads.

Paul, Arnab↗

Applications of Ergodic Theory to Coverage Analysis

The study of differential equations, or dynamical systems in general, has two fundamentally different approaches. We are most familiar with the construction of solutions to differential equations. Another approach is to study the statistical behavior of the solutions. Ergodic Theory is one of the most developed methods to study the statistical behavior of the solutions of differential equations. In the theory of satellite orbits, the statistical behavior of the orbits is used to produce 'Coverage Analysis' or how often a spacecraft is in view of a site on the ground. In this paper, we consider the use of Ergodic Theory for Coverage Analysis. This allows us to greatly simplify the computation of quantities such as the total time for which a ground station can see a satellite without ever integrating the trajectory, see Lo 1,2. More over, for any quantity which is an integrable function of the ground track, its average may be computed similarly without the integration of the trajectory. For example, the data rate for a simple telecom system is a function of the distance between the satellite and the ground station. We show that such a function may be averaged using the Ergodic Theorem.

Ergodic Theory↗

OVIS 3.2 user's guide.

This document describes how to obtain, install, use, and enjoy a better life with OVIS version 3.2. The OVIS project targets scalable, real-time analysis of very large data sets. We characterize the behaviors of elements and aggregations of elements (e.g., across space and time) in data sets in order to detect meaningful conditions and anomalous behaviors. We are particularly interested in determining anomalous behaviors that can be used as advance indicators of significant events of which notification can be made or upon which action can be taken or invoked. The OVIS open source tool (BSD license) is available for download at ovis.ca.sandia.gov. While we intend for it to support a variety of application domains, the OVIS tool was initially developed for, and continues to be primarily tuned for, the investigation of High Performance Compute (HPC) cluster system health. In this application it is intended to be both a system administrator tool for monitoring and a system engineer tool for exploring the system state in depth. OVIS 3.2 provides a variety of statistical tools for examining the behavior of elements in a cluster (e.g., nodes, racks) and associated resources (e.g., storage appliances and network switches). It provides an interactive 3-D physical view in which the cluster elements can be colored by raw or derived element values (e.g., temperatures, memory errors). The visual display allows the user to easily determine abnormal or outlier behaviors. Additionally, it provides search capabilities for certain scheduler logs. The OVIS capabilities were designed to be highly interactive - for example, the job search may drive an analysis which in turn may drive the user generation of a derived value which would then be examined on the physical display. The OVIS project envisions the capabilities of its tools applied to compute cluster monitoring. In the future, integration with the scheduler or resource manager will be included in a release to enable intelligent resource utilization. For example, nodes that are deemed less healthy (i.e., nodes that exhibit outlier behavior with respect to some set of variables shown to be correlated with future failure) can be discovered and assigned to shorter duration or less important jobs. Further, HPC applications with fault-tolerant capabilities would respond to changes in resource health and other OVIS notifications as needed, rather than undertaking preventative measures (e.g. checkpointing) at regular intervals unnecessarily.

97 MATHEMATICS AND COMPUTING↗

Carbonation Behavior of Pure Cement Hydrates under Supercritical Carbon Dioxide Conditions - 12199

Carbonation of cement-based waste forms using a supercritical carbon dioxide (SCCO{sub 2}) is a developing technology for the waste immobilization of radioactive and non-radioactive wastes. However, the detail carbonation behaviors of cement matrices under the SCCO{sub 2} condition are unknown, since cement matrices forms very complex phases. In this study, in order to clarify the crystal phases, we synthesized pure cement hydrate phases as each single phases; portlandite (Ca(OH){sub 2}), ettringite (Ca{sub 6}Al{sub 2}(SO{sub 4}){sub 3}(OH){sub 12}.26H{sub 2}O), and calcium silicate hydrate (n CaO---m SiO{sub 2} ---x H{sub 2}O), using suspensions containing a stoichiometric mixture of chemical regents, and performed carbonation experiments using an autoclave under supercritical condition for carbon dioxide. The XRD results revealed both the carbonate phases and co-product phases depending on the initial hydrate phases; gypsum for Ettringite, amorphous or crystalline silica for calcium silicate hydroxide. Thermogravimetric analysis was also performed to understand carbonation behaviors quantitatively. According to the experimental results, it was found that the major reaction was formation of calcium carbonate (CaCO{sub 3}) in all cases. However, the behaviors of H{sub 2}O and CO{sub 2} content were quietly different: Portlandite was most reactive for carbonation under SCCO{sub 2} conditions, and the CO{sub 2} content per one molar CaO was ranged from 0.96 ∼ 0.98. In the case of Ettringite, the experiment indicates partial decomposition of ettringite phase during carbonation. Ettringite was comparatively stable even under the SCCO{sub 2} conditions. Therefore, a part of ettringite remained and formed similar phases after the ettringite carbonation. The CO{sub 2} content for ettringite showed almost constant values around 0.86 ∼ 0.87. In the case of calcium silicate hydrate, the carbonation behavior was significantly influenced by the condition of SCCO{sub 2}. The CO{sub 2} content for the calcium silicate hydrate had values that ranged from 0.51 ∼ 1.01. The co-products of the carbonation were gypsum (CaSO{sub 4}) for ettringite, silica gel (SiO{sub x}) and silica (SiO{sub 2}) for calcium silicate hydrate, which also contributed to the densification of the particles. The production of co-products enhanced the change to their morphology after the carbonation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Unveiling the mechanism of photoinduced isomerization of the photoactive yellow protein (PYP) chromophore

A detailed theoretical analysis, based on extensive ab initio second-order approximate coupled cluster calculations, has been performed for the S{sub 1} potential energy surface (PES) of four photoactive yellow protein (PYP) chromophore derivatives that are hydrogen bonded with two water molecules and differ merely in the carbonyl substituent. The main focus is put on contrasting the isomerization properties of these four species in the S{sub 1} excited state, related to torsion around the chromophore's single and double carbon-carbon bonds. The analysis provides evidence of the different isomerization behavior of these four chromophore complexes, which relates to the difference in their carbonyl substituents. While a stable double-bond torsion pathway exists on the S{sub 1} PES of the chromophores bearing the –O–CH{sub 3} and –NH{sub 2} substituents, this is not the case for the –S–CH{sub 3} and –CH{sub 3} substituted species. The presence of the –S–CH{sub 3} group leads to a strong instability of the chromophore with respect to the single-bond twist, whereas in the case of the –CH{sub 3} substituent a crossing of the S{sub 1} and S{sub 2} PESs occurs, which perturbs the pathway. Based on this analysis, the key factors that support the double-bond torsion have been identified. These are (i) the hydrogen bonds at the phenolic oxygen of the chromophore, (ii) the weak electron-acceptor character of the carbonyl group, and (iii) the ethylene-like pattern of the torsion in the beginning of the process. Our results suggest that the interplay between these factors determines the chromophore's isomerization in the solvent environment and in the native PYP environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-Physics Coupled Seismic Safety Analysis of Molten-Salt Reactors

Pool-type Molten Salt Reactors (MSRs) are a promising advanced nuclear reactor concept relying on passive physical behavior to provide increased safety characteristics. The high heat capacity, high boiling point, unpressurized liquid salt contains the nuclear fuel and as it passes through the vessel achieves criticality and produces nuclear power. The salt then carries away the heat produced along with the delayed neutron precursors towards heat exchangers and primary pumps before entering the core. This forms a highly coupled multiphysics problem between neutronics and fluid flow, which makes modeling these reactors challenging. The safety/licensing case heavily relies on modeling and simulation to prove their safety, and significant effort has been expanded by the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to develop the appropriate simulation tools. Their safety/licensing will require a thorough analysis of their behavior during earthquake-based transients. Earthquakes are a transient condition commonly experienced in many regions, and are safely survived by dozens of reactors every year. Nonetheless, significant conservatisms were introduced with limited predictive modeling and simulation available. The first-of-a-kind capability developed by this research will allow for engineers to analyze ranges of design-basis and beyond-design basis accident scenarios to assess the integrity of the reactor vessel and surrounding system, possibly allowing for limiting the costly conservatisms in the design. This projects uses MASTODON, Griffin, and Pronghorn in the NEAMS ecosystem to model the coupled multiphysics problem posed by an earthquake in a molten salt reactor. It marches through a number of number of coupling schemes, from uncoupled simulations to tightly two-way coupled simulations. The appropriate level of coupling for these simulations will then be determined based on the accuracy in the quantities of interest (QoI) and computational effort involved in each scheme. The QoIs chosen for this paper include the mass flow rate across the heat exchanger (for Pronghorn simulations), power output of the reactor (for Griffin simulations), and the maximum Von Mises stress (for MASTODON simulations). This summary paper reports on the current progress of this project, with 2D tightly coupled multiphysics results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nonoverlapping block smoothers for the Stokes equations

Overlapping block smoothers efficiently damp the error contributions from highly oscillatory components within multigrid methods for the Stokes equations but they are computationally expensive. This paper is concentrated on the development and analysis of new block smoothers for the Stokes equations that are discretized on staggered grids. These smoothers are nonoverlapping and therefore desirable due to reduced computational costs. Traditional geometric multigrid methods are based on simple pointwise smoothers. However, using multigrid methods to efficiently solve more difficult problems such as the Stokes equations leads to computationally more expensive smoothers, for example, overlapping block smoothers. Nonoverlapping smoothers are less expensive, but have been considered less efficient in the literature. In this paper, we develop new nonoverlapping smoothers, the so-called triad-wise smoothers, and show their efficiency within multigrid methods to solve the Stokes equations. In addition, we compare overlapping and nonoverlapping smoothers by measuring their computational costs and analyzing their behavior by the use of local Fourier analysis.

97 MATHEMATICS AND COMPUTING↗

Predicting Unreinforced Fabric Mechanical Behavior with Recurrent Neural Networks

Unreinforced woven fabrics are widely employed in various high-performance applications, including parachute deployment systems, airbags, and ballistic armor. The analysis of such materials is inherently complex due to the multiscale structure of these materials, and the dependence of macroscale behavior on changes that occur at lower scales. Previously, NASA’s Multiscale Analysis Tool (NASMAT) showed its capability in predicting unreinforced fabric behavior at the macroscale by capturing finite rotations that occur at the mesoscale. Though effective, the tool can face high computational cost for large, complex problems, motivating the need for the development of a surrogate model that can capture the same behavior. A recurrent neural network (RNN) was developed and trained on virtual NASMAT data to mimic the physics-based solutions while improving the computational runtime. The architecture of the RNN to best simulate the fabric behavior was carefully crafted based on heuristic knowledge of predicting physics-based temporal data, manual hyperparameter case studies, and Hyperband optimization.. The resultant model was able to predict a variety of stress-strain curves for fabrics with different mesoscale geometries, and was further validated by comparing to experimental data for the K706 style Kevlar plain-weave fabric, demonstrating the ability of the model to effectively capture the geometric changes in the fabric without explicitly calculating them, as is done in NASMAT. Furthermore, the tool showed its ability to improve on the runtime by a factor of 10 for fabric solutions compared to the multiscale tool, which would further enable the simulation of complex loading scenarios on unreinforced fabrics.

Fabric↗

Corrosion Behavior of Steels in Supercritical CO 2 for Power Cycle Applications

In order to understand issues with corrosion of heat exchanger materials in direct supercritical carbon dioxide (sCO 2 ) power cycles, a series of autoclave exposure experiments and electrochemical experiments have been conducted. Corrosion behaviors of 347H stainless steel and P91 martensitic-ferrtic steel in sCO 2 environment have been compared. In autoclave exposure tests performed at 50°C- 245°C and 80 bar. Mass change measurements, surface characterization, and corrosion product analysis have been conducted to understand the corrosion behavior of steels in sCO 2 containing H 2 O and O 2 . Electrochemical tests performed at room temperature and 50°C, a simulation environment of water condensation phase with dissolved CO 2 was prepared to evaluate the corrosion resistance of materials. From both types of experiments, generally 347H showed higher corrosion resistance than P91.

01 COAL, LIGNITE, AND PEAT↗

Identification of efficient and stable solid-solid electrochemical interfaces for Li-S batteries. Final Report

The objective of this work is to develop a better understanding of the interactions between battery components that drive the observed battery performance. Using computational tools at the atomistic level, we elucidate molecular, crystal, and amorphous structures, interfacial structures and reactions, and electrochemical behavior. We focus on Li metal anodes, liquid electrolytes, solid electrolytes, S cathodes, and metal-oxide cathodes, and their corresponding interfaces. Within liquid electrolytes, we study their bulk structure and dynamics, as a function of salt concentration. The analysis allows to understand the formation of localized high concentrated regions as the solvent is substituted by a weakly interacting diluent species. Analysis of the electron distribution yields the reactive behavior at interfaces. Moreover, we employ tools that allow the characterization of ion and electron transport at interfaces, during the processes of solvation and desolvation occurring while cycling. For Sulfur cathodes we elucidate synthesis processes and the role of carbon-sulfur and nitrogen-sulfur interactions not only to provide electronic conductivity but also to define alternative reaction pathways during discharge of Li-S batteries. Full-cell simulations offer new insights regarding the integration of all the battery components. Our studies also include solid electrolytes and their interfaces with Li metal, S-C, and metal-oxide electrodes.

25 ENERGY STORAGE↗

Surface Composition of NiPd Alloys

Surface segregation in Ni-Pd alloys has been studied using the BFS method for alloys. Not only does the method predict an oscillatory segregation profile but it also indicates that the number of Pd-enriched surface planes can vary as a function of orientation. The segregation profiles were computed as a function of temperature, crystal face, and composition. Pd enrichment of the first layer is observed in (111) and (100) surfaces, and enrichment of the top two layers occurs for (110) surfaces. In all cases, the segregation profile shows oscillations that are actually related to weak ordering tendencies in the bulk. An atom-by-atom analysis was performed to identify the competing mechanisms leading to the observed surface behaviors. Large-scale atomistic simulations were also performed to investigate the temperature dependence of the segregation profiles as well as for analysis of the bulk structures. Finally, the observed surface behaviors are discussed in relation to the bulk phase structure of Ni-Pd alloys, which exhibit a tendency to weakly order.

Noebe, Ronald D.↗

Exploring the negative temperature coefficient behavior of acetaldehyde based on detailed intermediate measurements in a jet-stirred reactor

Acetaldehyde is an observed emission species and a key intermediate produced during the combustion and low-temperature oxidation of fossil and bio-derived fuels. Investigations into the low-temperature oxidation chemistry of acetaldehyde are essential to develop a better core mechanism and to better understand auto-ignition and cool flame phenomena. In this paper, the oxidation of acetaldehyde was studied at low-temperatures (528–946 K) in a jet-stirred reactor (JSR) with the corrected residence time of 2.7 s at 700 Torr. This work describes a detailed set of experimental results that capture the negative temperature coefficient (NTC) behavior in the low-temperature oxidation of acetaldehyde. The mole fractions of 28 species were measured as functions of the temperature by employing a vacuum ultra-violet photoionization molecular-beam mass spectrometer. To explain the observed NTC behavior, an updated mechanism was proposed, which well reproduces the concentration profiles of many observed peroxide intermediates. Finally, the kinetic analysis based on the updated mechanism reveals that the NTC behavior of acetaldehyde oxidation is caused by the competition between the O 2 -addition to and the decomposition of the CH 3 CO radical.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization and Damping Control of Mechanical Connections to Improve Performance of Horn Stripline

Magnetic focusing horns are critical components for creating a stable beam of neutrinos for neutrino facilities, such as the Long Baseline Neutrino Facility (LBNF) and the Neutrinos and Main Injector (NuMI) beam lines at Fermilab. The pulsed magnetic horns are powered by high current electricity through long striplines. In addition to requirements for low inductance and voltage standoff, the striplines must survive in a harsh radiation environment for the operational life of the component, specified as the 100 million pulses requirement for LBNF. Each stripline assembly consists of four (eight layers that splits off to 2 pairs of four layers at the horn interface) layers of Al 6101-T6. As an electromechanical system, the stripline layers are bolted together with ceramic isolators for electrical insulation and connections must facilitate passive cooling and mechanical stability. The striplines experience vibrational force in addition to clamping force, repetitive thermal and electro-magnetic loading. The holes of stripline plates for ceramic joints represent one of the weak links for potential failure [1,2]. By characterizing the contact behavior of these joints and optimizing their damping properties through finite element analysis and experimental modal analysis, stripline performance and longevity can be improved. This study not only helps predict the behavior of the striplines but also improves their performance to meet the required operational lifetime.

Liu, Zunping [Fermilab]↗

Finite element formulation with embedded weak discontinuities for strain localization under dynamic conditions

Here, we present an explicit finite element formulation designed for the treatment of strain localization under highly dynamic conditions. We also used a material stability analysis to detect the onset of localization behavior. Finite elements with embedded weak discontinuities are employed with the aim of representing subsequent localized deformation accurately. The formulation and its algorithmic implementation are described in detail. Numerical results are presented to illustrate the usefulness of this computational framework in the treatment of strain localization under highly dynamic conditions, and to examine its performance characteristics in the context of two-dimensional plane-strain problems.

36 MATERIALS SCIENCE↗

Redistribution of radionuclides in irradiated AGR-1 UCO TRISO fuel after 1800 °C safety testing

Release of radionuclides from intact tristructural-isotropic (TRISO) coated particle fuel at normal and accident conditions is a primary metric of fuel performance. The distribution of fission products and actinides in the TRISO layers of individual particles provides insight on radionuclide transport and release behavior and was determined using scanning electron microscopy analysis. Particles were isolated from an irradiated fuel compact (AGR-1 Compact 4-4-2) and analyzed as-irradiated or after individual particle safety-testing at 1800 °C for 650 h. Particles were selected for comparison based on their remaining 110mAg fission product inventory. These comparisons corroborated the observation that the 110m Ag inventory is a marker for relative irradiation temperature based on observed radionuclide distribution in the SiC layer. The comparison also indicated that the in-pile behavior influences the fission product and actinide species interactions with the TRISO layers during high temperature exposure after irradiation. The analysis confirms both palladium and uranium diffusion, as well as other species, are active in the UCO TRISO fuel system at 1800 °C and that palladium transport is active at lower temperatures relative to uranium. While diffusion across the SiC layer was observed, the intact nature of the SiC layer after the 1800 °C, 650-h exposure indicates the SiC layer maintained its functionality as a fission product barrier by mitigating release of radionuclides at beyond accident margin temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Phase Transformation Pathway of DyPO4 to 21.5 GPa

Interest in the deformation behavior and phase transformations of rare earth orthophosphates (REPO4s) spans several fields of science—from geological impact analysis to ceramic matrix composite engineering. In this study, the phase behavior of polycrystalline, xenotime DyPO4 is studied up to 21.5(16) GPa at ambient temperature using in situ diamond anvil cell synchrotron X-ray diffraction. This experiment reveals a large xenotime–monazite phase coexistence pressure range of 7.6(15) GPa and evidence for the onset of a post-monazite transformation at 13.9(10) GPa to scheelite. The identification of scheelite as the post-monazite phase of DyPO4, though not definitive, is consistent with REPO4 phase transformation pathways reported in both the experimental and the computational literature.

Sharma, Jai (ORCID:0000000339034534)↗