Search NASA⌕ Search

SEARCH · Search NASA

Results for “Component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Elastohydrodynamic principles applied to the design of helicopter components.

Elastohydrodynamic principles affecting the lubrication of transmission components are presented and discussed. Surface temperatures of the transmission bearings and gears affect elastohydrodynamic film thickness. Traction forces and sliding as well as the inlet temperature determine surface temperatures. High contact ratio gears cause increased sliding and may run at higher surface temperatures. Component life is a function of the ratio of elastohydrodynamic film thickness to composite surface roughness. Lubricant starvation reduces elastohydrodynamic film thickness and increases surface temperatures. Methods are presented which allow for the application of elastohydrodynamic principles to transmission design in order to increase system life and reliability.

Townsend, D. P.↗

Discrete component microwave amplifiers.

Several 2-3 GHz amplifiers using discrete variable components have been designed and tested. A power output of 6.5 watts with 30-mw drive and 29% efficiency has been obtained from a three-stage amplifier operating at 2.25 GHz. The unit has a 3 db bandwidth of 100 MHz and is stable with respect to temperature changes, a vacuum environment, and mechanical vibration. Significant problems arising from the use of discrete components have not been encountered.

Rippy, R. R.↗

Design integration and noise studies for jet STOL aircraft. Task 7C: Augmentor wing cruise blowing valveless system. Volume 2: Small-scale development testing of augmentor wing critical ducting components

Augmentor wing ducting system studies conducted on a valveless system configuration that provides cruise thrust from the augmentor nozzles have shown that most of the duct system pressure loss would occur in the strut-wing duct y-junction and the wing duct-augmentor lobe nozzles. These components were selected for development testing over a range of duct Mach numbers and pressure ratios to provide a technical basis for predicting installed wing thrust loading and for evaluating design wing loading of a particular wing aspect ratios. The flow characteristics of ducting components with relatively high pressure loss coefficients were investigated. The turbulent pressure fluctuations associated with flows at high Mach numbers were analyzed to evaluate potential duct fatigue problems.

Runnels, J. N.↗

Spacelab Phase B study environmental control system component handbook

Descriptions are given of candidate components for the Phase B Study of the Spacelab environmental control system. Most of the hardware was defined for the baseline ECS design concept. A low cost design approach was followed, with most of the components being selected from the Apollo and Skylab Programs.

Burns, R. A.↗

Component noise variables of a light observation helicopter

A test program was conducted to isolate and evaluate the individual noise sources of a light helicopter. To accomplish this, the helicopter was mounted on a special test rig, at a 6-foot skid height, in a simulated hover. The test rig contained by dynamometer for absorbing engine power and an exhaust silencing system for reducing engine noise. This test set-up allowed the various components of the helicopter to be run and listened to individually or in any combination. The sound pressure level was recorded at a point 200 feet from the helicopter as the component parameters were systematically varied. The tests were conducted in an open area, during the middle of the night, with no wind, and with all other known variables either eliminated or kept as constant as possible.

Robinson, F.↗

The effect of engine component noise on V/STOL aircraft noise contours

An analytical study of fly-over noise using noise contours to show the effects of varying airplane and path parameters. The method of approach was to synthesize engine component noise spectra and exercise these components along given flight paths to measure the individual and total fly-over effect as a function of noise footprint area. The study was carried out in two phases. Phase 1 utilized a research type aircraft and Phase 2 used an advanced VTOL aircraft. The effect of cross flow was considered for both inlet and exhaust sections of the engine.

Fogg, R. G.↗

Effect of small flares in the neutral component of secondary cosmic radiation

The results are presented of an investigation of the effect of small flares, scale divisions 1 and 1(+), in the neutron component of secondary cosmic radiation from the data of neutron supermonitors at the stations of Kiev, Bukhta Tiksi, and Deep River. It is shown that flares of scale divisions 1 and 1(+) are accompanied by an effect in the neutron component amounting to about 0.4%. A mechanism is presented for calculating the outflow of particles accelerated in small flares, owing to diffusion across the magnetic field of a trap.

Bondarenko, V. I.↗

Kinetics of homogeneous nucleation in many component systems

Reiss's classical treatment of the kinetics of homogeneous nucleation in a system containing two chemical components is extended to many-component systems. The formulation is analogous to the pseudo-stationary state theory of chemical reaction rates with the free energy as a function of the composition of the embryo taking the place of the potential energy as a function of interatomic distances.

Hirschfelder, J. O.↗

Design, manufacture, development, test, and evaluation of boron/aluminum structural components for space shuttle. Volume 4: Repairability

The repairability of boron/aluminum structural components was investigated. It was demonstrated that metal matrix composite material, damaged in service, can be repaired by techniques that are not very different from those currently in use for conventional materials. A list of repair guidelines was prepared to aid in determining the proper repair techniques for a given structure. The guidelines include specifying types of repair material and their applicability, corrosion prevention procedures, design criteria, and inspection criteria. Boron/aluminum structural components were repaired and tested to compare as-fabricated and repaired performance. All but one set of specimens, when repaired, exceeded the strength of the original specimens.

Miller, M. F.↗

A component of primitive nuclear composition in carbonaceous meteorites

Oxygen isotope analysis of anhydrous high-temperature phases from carbonaceous meteorite chondrites indicates a high degree of O(17) and O(18) isotope depletion. The isotope decay is believed to be a result of nuclear rather than chemical processes caused by the admixture of a component consisting of almost pure O(16). It is theorized that this component may predate the solar system and may represent interstellar dust with a separate history of nucleosynthesis.

Clayton, R. N.↗

Approximate spin projection of three-component UHF wavefunctions - The states of the pentachlorocyclopentadienyl cation and the croconate dianion, C5O5/2-/

The approximate spin projection method of Amos et al. is extended to handle UHF wave functions having three significant components of differing multiplicity. An expression is given for the energy after single annihilation which differs from that of Amos and Hall. The new expression reproduces the results obtained from a previous exact calculation for which the weights and energies of the components are known. The extended approximate projection method is applied to the pi-electron UHF wave functions for the ground states of the pentachlorocyclopentadienyl cation and the croconate dianion, C5O5(2-). The results indicate a triplet ground state for the former and a singlet ground state for the latter, in agreement with experimental ESR susceptibility measurements for these molecular ions. C5C15(-) cannont be treated by restricted Hartree-Fock theory, due to its open-shell ground state. Incorrect results are obtained for the croconate dianion, if restricted Hartree-Fock theory and singly excited configuration interactions are utilized.

Phillips, D. H.↗

Reliability approach to rotating-component design

A probabilistic methodology for designing rotating mechanical components using reliability to relate stress to strength is explained. The experimental test machines and data obtained for steel to verify this methodology are described. A sample mechanical rotating component design problem is solved by comparing a deterministic design method with the new design-by reliability approach. The new method shows that a smaller size and weight can be obtained for specified rotating shaft life and reliability, and uses the statistical distortion-energy theory with statistical fatigue diagrams for optimum shaft design. Statistical methods are presented for (1) determining strength distributions for steel experimentally, (2) determining a failure theory for stress variations in a rotating shaft subjected to reversed bending and steady torque, and (3) relating strength to stress by reliability.

Kececioglu, D. B.↗

Attitude Control Propulsion Components, Volume 2

Attitude control propulsion components are described, including hydrazine thrusters, hydrazine thruster and cold gas jet valves, and pressure and temperature transducers. Component-ordered data are presented in tabular form; the manufacturer and specific space program are included.

Source record↗

Nonlinear seismic analysis of a reactor structure impact between core components

The seismic analysis of the FFTF-PIOTA (Fast Flux Test Facility-Postirradiation Open Test Assembly), subjected to a horizontal DBE (Design Base Earthquake) is presented. The PIOTA is the first in a set of open test assemblies to be designed for the FFTF. Employing the direct method of transient analysis, the governing differential equations describing the motion of the system are set up directly and are implicitly integrated numerically in time. A simple lumped-nass beam model of the FFTF which includes small clearances between core components is used as a "driver" for a fine mesh model of the PIOTA. The nonlinear forces due to the impact of the core components and their effect on the PIOTA are computed.

Hill, R. G.↗

Kinetics of homogeneous nucleation on many-component systems

Reiss's (1950) classical treatment of the kinetics of homogeneous nucleation in a system containing two chemical components is extended to many-component systems. The formulation is analogous to the pseudostationary-state theory of chemical reaction rates, with the free energy as a function of the composition of the embryo taking the place of the potential energy as a function of interatomic distances.

Hirschfelder, J. O.↗

A three-component concept of the chromosphere and transition region

It is proposed that present observations of the chromosphere and transition region in EUV, optical and mm wavelengths are best described by a three-component concept. The three components are taken to be the interiors of supergranular cells, the hot plagettes overlying faculae, and the cooler, transient mottles which surround them in the network boundaries. The enhanced emission of the hot plagettes in transition ions is interpreted as a direct result of the increased pressure scale height over faculae relative to the cell interiors.

Foukal, P.↗

Lead isotope systematics of some Apollo 17 soils and some separated components from 76501

Isotopic lead data from bulk samples of Apollo 17 soils were analyzed, and they define a chord in a concordia diagram, showing the presence of a component or components containing excess radiogenic lead with Pb-207/Pb-206 equal to about 1.32. The chord is distinctly different from the cataclysm chord, for which Pb-207/Pb-206 is approximately 1.45. Nitric acid analysis of plagioclase indicates lead ages of around 4.35 AE, in agreement with previous findings. Agglutinates from soil 76501,34 show loss of approximately 15% of lead.

Church, S. E.↗

Some legal, jurisdictional, and operational implications of a congressional technology assessment component

An analysis is presented for the Congress of the relationships between an institutionalized assessment function and legislative information gathering and decisionmaking needs. The study was directed to the following topics: (1) the positing of a hypothetical technology assessment component for legislative support; (2) the posing of a number of questions relating to the operational context of this assessment component including the organization/operational framework, general operational problems, access to relevant information, and the utilization of assessment data and analyses; and (3) some selected comments relevant to the questions posed.

Mayo, L. H.↗