Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computer software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Software approach to automatic patching of analog computer

The Automatic Patching Verification program (APV) is described which provides the hybrid computer programmer with a convenient method of performing a static check of the analog portion of his study. The static check insures that the program is patched as specified, and that the computing components being used are operating correctly. The APV language the programmer uses to specify his conditions and interconnections is similar to the FORTRAN language in syntax. The APV control program reads APV source program statements from an assigned input device. Each source program statement is processed immediately after it is read. A statement may select an analog console, set an analog mode, set a potentiometer or DAC, or read from the analog console and perform a test. Statements are read and processed sequentially. If an error condition is detected, an output occurs on an assigned output device. When an end statement is read, the test is terminated.

Source record↗

Automatic documentation system extension to multi-manufacturers' computers and to measure, improve, and predict software reliability. Appendix A and B

A manual which explains how to use the DOMONIC command language is presented. The manual consists of the following sections: 1. Introduction 2. What You Must Know to Use DOMONIC 3. Functions of DOMONIC 4. Entering and Manipulating Data 5. Templates and Data Definitions 6. Recipes and Document Generation 7. Initiating A Project and 8. Entering and Changing Security Controls. The first four sections must be known by all DOMONIC users. Sections five, seven and eight describe functions normally used only by project management. Section six tells how to generate documents. The manual specifies what commands to use in performing each of the functions mentioned above.

Simmons, D. B.↗

Implementation of Large Scale Integrated (LSI) circuit design software

Portions of the Computer Aided Design and Test system, a collection of Large Scale Integrated (LSI) circuit design programs were modified and upgraded. Major modifications were made to the Mask Analysis Program in the form of additional operating commands and file processing options. Modifications were also made to the Artwork Interactive Design System to correct some deficiencies in the original program as well as to add several new command features related to improving the response of AIDS when dealing with large files. The remaining work was concerned with updating various programs within CADAT to incorporate the silicon on sapphire silicon gate technology.

Kuehlthau, R. L.↗

Software for transferring NASTRAN datablocks between dissimilar computers

Efforts to freely exchange all types of NASTRAN datablocks between the internalized forms in any of three makes of NASTRAN-class computers and that of any other such make are described. The medium used is magnetic tape formatted in BCD (Binary Coded Decimal) character and numerical fields. The method used involves a FORTRAN-coded post-processor and a pre-processor, mostly portable but with a small assembly-coded component peculiar to each make of machine. Snags in a method reported in an earlier NASTRAN colloquium have been overcome and functional requirements upgraded as well.

Rosencranz, R.↗

Data collection and evaluation for experimental computer science research

The Software Engineering Laboratory was monitoring software development at NASA Goddard Space Flight Center since 1976. The data collection activities of the Laboratory and some of the difficulties of obtaining reliable data are described. In addition, the application of this data collection process to a current prototyping experiment is reviewed.

Zelkowitz, Marvin V.↗

Photovoltaic array performance and life-cycle cost simulation using new software tools

The three computer models, SAMICS, PVARRAY, and LCP can be used together as a single analytical tool to compare the lifetime economic value of a photovoltaic (PV) array. This evaluation can be used to compare various module and array configurations and the performance characteristics of different module manufacturing technologies.

Daniel, R. E.↗

SKYMAP: Exploring the Universe in software

SKYMAP is a computer program which produces maps of arbitrary portions of the sky in a variety of projections and coordinate systems. Over the past ten years it has been used to produce finder charts for occultations by planets, display scan and image data from the Spacelab 2 Infrared Telescope, and make maps of fields for astronomical observations at X-ray, optical, infrared, and radio wavelengths. It can display multiple source catalogs, including the HST Guide Star Catalog, as well as solar system objects with astrometric accuracy using the JPL DE-130 ephemeris or tabulated positions. SKYMAP can be tuned to a specific task using an ASCII parameter file which controls how information is displayed on any Tektronix-compatible graphics display. The program contains a variety of interactive graphic and image processing features and has been ported to a variety of computer systems. A recent project visually demonstrates source density variation in various commonly-used all-sky catalogs.

Mink, D. J.↗

Theory, Modeling, Software and Hardware Development for Analytical and Computational Materials Science

The focus of this Cooperative Agreement between the Computational Materials Laboratory (CML) of the Processing Science and Technology Branch of the NASA Glenn Research Center (GRC) and the Department of Theoretical and Applied Mathematics at The University of Akron was in the areas of system development of the CML workstation environment, modeling of microgravity and earth-based material processing systems, and joint activities in laboratory projects. These efforts complement each other as the majority of the modeling work involves numerical computations to support laboratory investigations. Coordination and interaction between the modelers, system analysts, and laboratory personnel are essential toward providing the most effective simulations and communication of the simulation results. Toward these means, The University of Akron personnel involved in the agreement worked at the Applied Mathematics Research Laboratory (AMRL) in the Department of Theoretical and Applied Mathematics while maintaining a close relationship with the personnel of the Computational Materials Laboratory at GRC. Network communication between both sites has been established. A summary of the projects we undertook during the time period 9/1/03 - 6/30/04 is included.

Young, Gerald W.↗

Human factors process failure modes and effects analysis (HF PFMEA) software tool

Methods, computer-readable media, and systems for automatically performing Human Factors Process Failure Modes and Effects Analysis for a process are provided. At least one task involved in a process is identified, where the task includes at least one human activity. The human activity is described using at least one verb. A human error potentially resulting from the human activity is automatically identified, the human error is related to the verb used in describing the task. A likelihood of occurrence, detection, and correction of the human error is identified. The severity of the effect of the human error is identified. The likelihood of occurrence, and the severity of the risk of potential harm is identified. The risk of potential harm is compared with a risk threshold to identify the appropriateness of corrective measures.

Chandler, Faith T.↗

Computer In The Loop: A Paradigm For Software Augmentation Of Terrestrial Medical Support In Asynchronous Communication Environments

As humans plan for missions beyond the reach of real-time communication supported by terrestrially-based crews (i.e., increasingly earth-independent spaceflight missions), we need to consider how to maximize this effectiveness despite asynchronous communication with Earth. Medical events – especially those involving the sparing of life, limb, or eyesight - often need to be acted on immediately, in real-time. Often the expertise necessary to successfully complete such action covers an enormous range of training that is unrealistic to expect from crews engaged in exploration spaceflight. Thus, the medical support paradigm for asynchronous environments must account for both the limitations and coordinate seamlessly among ground-based expertise, the need for real-time interventions, and the limited crew time and knowledge resources.

D R Levin↗

Process Modeling and Validation for Metal Big Area Additive Manufacturing

Metal Big Area Additive Manufacturing (mBAAM) is a new additive manufacturing (AM) technology based on the metal arc welding. A continuously fed metal wire is melted by an electric arc that forms between the wire and the substrate, and deposited in the form of a bead of molten metal along the predetermined path. Objects are manufactured one layer at a time starting from the base plate. The final properties of the manufactured object are dependent on its geometry and the metal deposition path, in addition to depending on the basic welding process parameters. Computational modeling can be used to accelerate the development of the mBAAM technology as well as a design and optimization tool for the actual manufacturing process. We have developed a finite element method simulation framework for mBAAM using the new features of software ABAQUS. The computational simulation of material deposition with heat transfer is performed first, followed by the structural analysis based on the temperature history for predicting the final deformation and stress state. In this formulation, we assume that two physics phenomena are coupled in only one direction, i.e. the temperatures are driving the deformation and internal stresses, but their feedback on the temperatures is negligible. The experiment instrumentation (measurement types, sensor types, sensor locations, sensor placements, measurement intervals) and the measurements are presented. The temperatures and distortions from the simulations show good correlation with experimental measurements. Ongoing modeling work is also briefly discussed.

Simunovic, Srdjan↗

Cumulative reports and publications through December 31, 1991

A reports and publications list is given from the Institute for Computer Applications in Science and Engineering (ICASE) through December 31, 1991. The major categories of the current ICASE research program are; numerical methods, control and parameter identification problems, computational problems in engineering and the physical sciences, and computer systems and software. Since ICASE reports are intended to be preprints of articles that will appear in journals or conference proceedings, the published reference is included when available.

Mathematics↗