Search NASA⌕ Search

SEARCH · Search NASA

Results for “Curved Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Early Stage Detection of Stress Due to Copper on Maize (Zea mays L.) by Laser-Induced Fluorescence and Infrared Spectroscopy

Laser-induced fluorescence (LIF) and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy has been applied for the nondestructive, label free, and rapid analyses of the impact of copper (25, 50, and 75 μM) on maize seedlings at an early stage before the changes appear visually on the plant. The LIF measurement has been used to detect the signs of stress in the photosynthetic pigment. The integrated areal intensity and increasing fluorescence intensity ratios indicate decrease in the photosynthetic pigments in the leaves of maize plants stressed with copper. The ATR-FTIR technique has been utilized to estimate the changes arising in the cell wall polysaccharides, amino acid, secondary structure of protein and lipid content of the leaves of control and copper-treated maize seedlings. The second derivative and curve fitting analyses have been applied for the enhancement of the spectral variations and quantitative estimation of the changes arising in the biochemical profile. The result shows an increase in the pectin, lignin, amino acid, and protein content and reduction in the amount of cellulose and lipid in the leaves of maize seedlings due to the treatment of copper. This study indicates the toxic response of copper by hampering the growth and reduction in the photosynthetic pigments and biochemical content of the maize seedlings. This study also demonstrates the feasibility of the spectroscopic techniques (LIF and ATRFTIR) as a rapid, label free, and nondestructive probe for the assessment of stress and monitoring of crops.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rheological Evolution of Ti-Bearing Slag with Different Volume Fractions of TiN

The effect of the volume fraction of TiN (0 to 4.27 vol pct) on the rheological behaviors of Ti-bearing slag, including the viscosity and the constitutive equation, was investigated using a Brookfield rheometer at 1773 K. With the increasing TiN, the viscosity and the shear stress increased substantially, and the slag is converted from Newtonian to non-Newtonian. When the slag samples were dispersed with TiN (1.00 to 4.27 vol pct), the measured viscosities were greater than those estimated by the Einstein–Roscoe equation, and the complex internal structure was suggested to be responsible for the extra enhancement of the viscosity beyond that caused by TiN itself. The viscosity curves of the slag samples containing TiN (1.00 to 4.27 vol pct) were divided into three regions depending on the critical shear rate and the initial shear rate. In the Newtonian region, the apparent volume fraction of TiN was defined and used to develop a semiempirical model based on the Einstein–Roscoe equation to describe the viscosity. In the two non-Newtonian regions, the shear rate, the yield stress, and the viscosity differences between the non-Newtonians regions and the Newtonian regions were applied in developing the viscosity models.

36 MATERIALS SCIENCE↗

LAVA 1.0: A general-purpose python toolkit for calculation of material properties with LAMMPS and VASP

Here, we introduce LAVA, a general-purpose python toolkit to provide user-friendly and high throughput calculations for material properties using both LAMMPS and VASP. It contains a set of classes as well as pre-processing and post-processing functions to prepare, execute and extract information from LAMMPS/VASP simulations. An overview of the program structure is provided. The current version contains modules to calculate elastic and mechanical properties such as lattice constant, cohesive energy, cold curve, elastic constants, bulk and shear modulus, volume conserving/non-conserving deformation path, vacancy/interstitial formation energy, surface energy, stacking fault energy, melting point, radial distribution function, and thermal expansion. These functionalities are demonstrated for different interatomic potentials and DFT calculations in Al.

36 MATERIALS SCIENCE↗

Nanoscale size dependence parameters on lattice thermal conductivity of Wurtzite GaN nanowires

Graphical abstract: Temperature dependence of calculated lattice thermal conductivity of Wurtzite GaN nanowires. Highlights: Black-Right-Pointing-Pointer A modified Callaway model is used to calculate lattice thermal conductivity of Wurtzite GaN nanowires. Black-Right-Pointing-Pointer A direct method is used to calculate phonon group velocity for these nanowires. Black-Right-Pointing-Pointer 3-Gruneisen parameter, surface roughness, and dislocations are successfully investigated. Black-Right-Pointing-Pointer Dislocation densities are decreases with the decrease of wires diameter. -- Abstract: A detailed calculation of lattice thermal conductivity of freestanding Wurtzite GaN nanowires with diameter ranging from 97 to 160 nm in the temperature range 2-300 K, was performed using a modified Callaway model. Both longitudinal and transverse modes are taken into account explicitly in the model. A method is used to calculate the Debye and phonon group velocities for different nanowire diameters from their related melting points. Effect of Gruneisen parameter, surface roughness, and dislocations as structure dependent parameters are successfully used to correlate the calculated values of lattice thermal conductivity to that of the experimentally measured curves. It was observed that Gruneisen parameter will decrease with decreasing nanowire diameters. Scattering of phonons is assumed to be by nanowire boundaries, imperfections, dislocations, electrons, and other phonons via both normal and Umklapp processes. Phonon confinement and size effects as well as the role of dislocation in limiting thermal conductivity are investigated. At high temperatures and for dislocation densities greater than 10{sup 14} m{sup -2} the lattice thermal conductivity would be limited by dislocation density, but for dislocation densities less than 10{sup 14} m{sup -2}, lattice thermal conductivity would be independent of that.

36 MATERIALS SCIENCE↗

PySIDT: Subgraph Isomorphic Decision Trees for Molecular Property Prediction

Accurate molecular property prediction is important across all fields of chemistry. Deep neural networks (DNNs) have become increasingly popular due to their ability to train automatically, avoiding the incredibly tedious process of constructing and extending traditional property estimation schemes. However, DNNs require large amounts of training data, are challenging to interpret, require large amounts of memory to load even during inference, and have severe difficulties incorporating qualitative chemical knowledge, which are often desired for molecular property prediction tasks. Here, in this study, we present PySIDT (https://github.com/zadorlab/PySIDT), a software for training and running inference on Subgraph Isomorphic Decision Trees (SIDTs). SIDTs are graph-based decision trees made of nodes associated with molecular substructures. Inference is done by descending target molecular structures down the decision tree to nodes with matching subgraph isomorphic substructures and making predictions based on the final (most specific) nodes matched. SIDTs scale down well to dataset sizes much smaller than is feasible for DNNs. As trees of molecular substructures, SIDTs are inherently readable and easy to visualize, making them easy to analyze. They are also straightforward to extend and retrain, facilitate uncertainty estimation, and enable easy integration of expert knowledge. We demonstrate the SIDT approach discussing its application to a diverse range of molecular prediction tasks: rate coefficient estimation, diffusion coefficient estimation, thermochemistry estimation, transition state bond stretch prediction, p K a prediction, stability of molecular structures, stability of surface structures, and prediction of surface lateral interaction energetics. Additionally, we demonstrate the power of the SIDT algorithms in two direct learning curve vanilla comparisons with the popular DNN-based software Chemprop and the popular gradient boosted trees-based software XGBoost on enthalpy of formation and rate coefficient prediction tasks. In particular, in the enthalpy of formation case, vanilla PySIDT is able to outperform vanilla Chemprop and XGBoost across the full range of training/validation set sizes out to 11,560 data points.

Johnson, Matthew Sean [Sandia National Laboratorie↗

Frequency dependent dynamical electromechanical response of mixed ionic-electronic conductors

Frequency dependent dynamic electromechanical response of the mixed ionic-electronic conductor film to a periodic electric bias is analyzed for different electronic and ionic boundary conditions. Dynamic effects of mobile ions concentration (stoichiometry contribution), charge state of acceptors (donors), electron concentration (electron-phonon coupling via the deformation potential) and flexoelectric effect contribution are discussed. A variety of possible nonlinear dynamic electromechanical response of MIEC films including quasi-elliptic curves, asymmetric hysteresis-like loops with pronounced memory window and butterfly-like curves are calculated. The electromechanical response of ionic semiconductor is predicted to be a powerful descriptor of local valence states, band structure and electron-phonon correlations that can be readily measured in the nanoscale volumes and in the presence of strong electronic conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A watt-class 1-THz backward-wave oscillator based on sine waveguide

A novel backward wave oscillator was proposed by utilizing a concise sine waveguide slow-wave structure combined with sheet electron beam to operate at terahertz frequency band. First, the design method was described, and the dispersion curve and interaction impedance of the sine waveguide were calculated, then the device oscillation frequency and operating voltage were determined. Next, the circuit transmission losses were learned over the tunable frequency range. Finally, the particle-in-cell simulation method was applied to predict its signal generation performance. The investigation results show that, the backward wave oscillator can produce over 1.9 -W peak power output at the central operating frequency of 1-THz under 27-kV operating voltage and 5-mA beam current. And the interaction efficiency at 1-THz is more than 1.4% with a circuit length of 7.2-mm. It, therefore, will be considered as a promising watt-class terahertz radiation source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evaluation of freestanding boron-doped diamond grown by chemical vapour deposition as substrates for vertical power electronic devices

In this study, 4 x 4 mm{sup 2} freestanding boron-doped diamond single crystals with thickness up to 260 {mu}m have been fabricated by plasma assisted chemical vapour deposition. The boron concentrations measured by secondary ion mass spectroscopy were 10{sup 18} to 10{sup 20} cm{sup -3} which is in a good agreement with the values calculated from Fourier transform infrared spectroscopy analysis, thus indicating that almost all incorporated boron is electrically active. The dependence of lattice parameters and crystal mosaicity on boron concentrations have also been extracted from high resolution x-ray diffraction experiments on (004) planes. The widths of x-ray rocking curves have globally shown the high quality of the material despite a substantial broadening of the peak, indicating a decrease of structural quality with increasing boron doping levels. Finally, the suitability of these crystals for the development of vertical power electronic devices has been confirmed by four-point probe measurements from which electrical resistivities as low as 0.26 {Omega} cm have been obtained.

36 MATERIALS SCIENCE↗

Some Considerations On Photocurrent Characteristics Of Poly(alkylthiophene) And Photovoltaic Characteristics Of Poly(alkylthiophene)/ZnO Based Hybrid Solar Cells

Photocurrent characteristics of poly(alkylthiophene) has been investigated in ITO/poly(alkylthiophene)/Au structure by performing the V-I measurement at various light illumination intensity. The dependence of photocurrent on light intensity was clearly observed in reverse bias condition. The photocurrent characteristics obey a power law dependence on light intensity, which may be related with the electric field dependent charge carrier generation and transport. Photovoltaic characteristics has been investigated in ITO/Al-doped ZnO/poly(alkylthiophene)/Ag structure. The observed photovoltaic characteristics show the function of this ZnO layer as the acceptor layer. However, the V-I curve indicates unusual behavior indicating Ohmic-like characteristic, which is discussed by considering the nano-morphology and the conductivity properties of the ZnO layer.

36 MATERIALS SCIENCE↗

STRUCTURE AND DYNAMICS OF QUIESCENT FILAMENT CHANNELS OBSERVED BY HINODE/XRT AND STEREO/EUVI

We present a study of the structure and dynamics of quiescent filament channels observed by Hinode/XRT and STEREO/EUVI at the solar minimum 23/24 from 2006 November to 2008 December. For 12 channels identified on the solar disk (Group I channels), we find that the morphology of the structure on the two sides of the channel is asymmetric in both X-rays and EUV: the eastern side has curved features while the western side has straight features. We interpret the results in terms of a magnetic flux rope model. The asymmetry in the morphology is due to the variation in axial flux of the flux rope along the channel, which causes the field lines from one polarity to turn into the flux rope (curved feature), while the field lines from the other polarity are connected to very distant sources (straight). For most of the 68 channels identified by cavities at the east and west limbs (Group II channels), the asymmetry cannot be clearly identified, which is likely due to the fact that the axial flux may be relatively constant along such channels. Corresponding cavities are identified only for 5 of the 12 Group I channels, while Group II channels are identified for all of the 68 cavity pairs. The studied filament channels are often observed as dark channels in X-rays and EUV. Sheared loops within Group I channels are often seen in X-rays, but are rarely seen in Group II channels as shown in the X-ray Telescope daily synoptic observations. A survey of the dynamics of studied filament channels shows that filament eruptions occur at an average rate of 1.4 filament eruptions per channel per solar rotation.

79 ASTRONOMY AND ASTROPHYSICS↗

Possible detection of a cyclotron resonance scattering feature in the X-ray pulsar 4U 1909+07

We present timing and broad band spectral studies of the high-mass X-ray binary pulsar 4U 1909+07 using data from Suzaku observations during 2010 November 2-3. The pulse period of the pulsar is estimated to be 604.11 ± 0.14 s. Pulsations are seen in the X-ray light curve up to ∼70 keV. The pulse profile is found to be strongly energy-dependent: a complex, multi-peaked structure at low energy becomes a simple single peak at higher energy. We found that the 1-70 keV pulse-averaged continuum can be fit by the sum of a blackbody and a partial covering Negative and Positive power law with Exponential cutoff model. A weak iron fluorescence emission line at 6.4 keV was detected in the spectrum. An absorption-like feature at ∼44 keV was clearly seen in the residuals of the spectral fitting, independent of the continuum model adopted. To check the possible presence of a cyclotron resonance scattering feature (CRSF) in the spectrum, we normalized the pulsar spectrum with the spectrum of the Crab Nebula. The resulting Crab ratio also showed a clear dip centered at ∼44 keV. We performed statistical tests on the residuals of the spectral fitting and also on the Crab spectral ratio to determine the significance of the absorption-like feature and identified it as a CRSF of the pulsar. We estimated the corresponding surface magnetic field of the pulsar to be 3.8 × 10{sup 12} G.

79 ASTRONOMY AND ASTROPHYSICS↗

IMAGE-PLANE ANALYSIS OF n-POINT-MASS LENS CRITICAL CURVES AND CAUSTICS

The interpretation of gravitational microlensing events caused by planetary systems or multiple stars is based on the n-point-mass lens model. The first planets detected by microlensing were well described by the two-point-mass model of a star with one planet. By the end of 2014, four events involving three-point-mass lenses had been announced. Two of the lenses were stars with two planetary companions each; two were binary stars with a planet orbiting one component. While the two-point-mass model is well understood, the same cannot be said for lenses with three or more components. Even the range of possible critical-curve topologies and caustic geometries of the three-point-mass lens remains unknown. In this paper we provide new tools for mapping the critical-curve topology and caustic cusp number in the parameter space of n-point-mass lenses. We perform our analysis in the image plane of the lens. We show that all contours of the Jacobian are critical curves of re-scaled versions of the lens configuration. Utilizing this property further, we introduce the cusp curve to identify cusp-image positions on all contours simultaneously. In order to track cusp-number changes in caustic metamorphoses, we define the morph curve, which pinpoints the positions of metamorphosis-point images along the cusp curve. We demonstrate the usage of both curves on simple two- and three-point-mass lens examples. For the three simplest caustic metamorphoses we illustrate the local structure of the image and source planes.

79 ASTRONOMY AND ASTROPHYSICS↗

Exact statistics of helical wormlike chains with twist-bend coupling

Here, we present a solution for the Green's function for the general case of a helical wormlike chain with twist-bend coupling and demonstrate the applicability of our solution for evaluating general structural and mechanical chain properties. We find that twist-bend coupling renormalizes the persistence length and the force-extension curves relative to wormlike chains. Analysis of intrinsically twisted polymers shows that incorporation of twist-bend coupling results in the oscillatory behavior in principal tangent correlations that are observed in some studies of synthetic polymers. The exact nature of our solution provides a framework to evaluate the role of twist-bend coupling on polymer properties, such as DNA bound to histones and motivates the reinterpretation of existing biopolymer experimental data.

Ghosh, Ashesh [University of California, Berkeley,↗

Theoretical study of dissociative recombination of Cl{sub 2}{sup +}

Theoretical studies of low-energy electron collisions with Cl{sub 2}{sup +} leading to direct dissociative recombination are presented. The relevant potential energy curves and autoionization widths are calculated by combining electron scattering calculations using the complex Kohn variational method with multireference configuration interaction structure calculations. The dynamics on the four lowest resonant states of all symmetries is studied by the solution of a driven Schroedinger equation. The thermal rate coefficient for dissociative recombination of Cl{sub 2}{sup +} is calculated and the influence on the thermal rate coefficient from vibrational excited target ions is investigated.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electrons in Quasi-1D Waveguides with the Spin–Orbit Interaction: Manifestations of Additional Spin Symmetry

We consider quasi-one-dimensional electron waveguides with spin–orbit interaction, which are formed in quantum wells grown along arbitrary crystallographic directions. An analytic solution to the Schrödinger equation is obtained for systems with Hamiltonians possessing additional spin symmetry. It is shown that the dispersion curves for electrons, which correspond to different size-quantization modes, can intersect only when such symmetry exists. We analyze the structure of dips appearing on the dependences of the conductance of an inhomogeneous waveguide on the energy of carriers. It is shown that the width of the dips substantially depends on the waveguide orientation in the plane of the quantum well. In particular, it vanishes when the waveguide is formed along the direction of the “magic” vector of the initial 2D system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polariton condensate coherence in planar microcavities in a magnetic field

In planar GaAs microcavities in a magnetic field up to 5 T perpendicular to the structure growth plane, under conditions of resonant pulsed pumping to a point close to the inflection point of the lower dispersion curve, Zeeman splitting of the spin sublevels of the polariton condensate is observed. This is accompanied by a significant change in the degree of circular polarization and the second-order correlator g{sup 2}(0). It is found that the correlator is different for the spin sublevels of the polariton condensate, split in a magnetic field. In particular, correlator measurements indicate different condensation thresholds for the spin sublevels. The correlator values initially differing in terms of the absence of a field increase, reach a maximum, and then decrease and become equal for different polarizations in a field of 5 T.

36 MATERIALS SCIENCE↗

Electric-Field Behavior of the Resonance Features of the Tunneling Photocurrent Component in InAs(QD)/GaAs Heterostructures

The electric-field behavior of resonance features of the photoelectric characteristics of InAs/GaAs heterostructures is investigated. The emission of carriers excited by light from InAs quantum dots into the GaAs matrix is ​​discussed. It is shown that at the temperature of liquid nitrogen the photocurrent in a strong transverse electric field is only determined by the effect of electron tunneling through a barrier formed at the quantum-dot interfaces. Comparison of the experimental curves with the results obtained using a quasiclassical expression for the tunneling-current component and subsequent analysis of the potential structure made it possible to refine the parameters of the heterostructure under study. The contribution of the resonance component caused by possible electron tunneling through the barrier with the participation of the local defect states to the total tunneling current is analyzed. The influence of the level of excitation of the system on the photocurrent flowing through the InAs/GaAs heterojunction is theoretically studied.

36 MATERIALS SCIENCE↗

Structural Aspects of Deformational Amorphization of Ti{sub 50}Ni{sub 25}Cu{sub 25} Crystalline Alloy under High Pressure Torsion

The evolution of the structure of the Ti50Ni25Cu25 crystalline alloy during high-pressure torsion at room temperature has been studied. The torsional moment variation curve as a function of the strain value was fixed in situ, which allowed directly observing the transition of the material from the crystalline state to the amorphous state during the HPT. It was found that the amorphization of the material in the course of the HPT begins on the grain boundaries and fragments of the crystalline phase. Amorphized boundaries form a “grain-boundary carcass” in the cells of which the high-defect nanocrystalline phase is formed. Growth of deformation leads to broadening of the “grain-boundary carcass,” loss of stability of the crystalline phase, and, as a consequence, to the phase transition “crystal → amorphous” state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗