Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffusers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Diffusion of silver over atomically clean silicon surfaces

The diffusion of silver the (111), (100), and (110) silicon surfaces is studied by Auger electron spectroscopy and low-energy electron diffraction. The mechanisms of diffusion over the (111) and (110) surfaces are revealed, and the temperature dependences of diffusion coefficients are measured. An anisotropy of silver diffusion over the (110) surface is detected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffusion of Ag, Sn, and Pb over Atomically Clean Ge(111) Surface

Auger electron spectroscopy and low-energy electron diffraction were used to study the diffusion of Ag, Sn, and Pb over the Ge (111) surface. The mechanisms of diffusion of atoms of these elements over the Ge(111) surface are determined, and the temperature dependences of the diffusion coefficients are measured. The parameters of diffusion of these elements over the Ge(111) and Si (111) surfaces are compared.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrically active centers formed in silicon during the high-temperature diffusion of boron and aluminum

The parameters of electrically active centers formed during the high-temperature diffusion of boron and aluminum into silicon in various media are studied by the Hall method and capacitance spectroscopy. It is found that the variation in the resistivity of the n base of the structures with p-n junctions fabricated in the study is controlled by the formation of three donor levels Q1, E4, and Q3 with the energies E{sub c} - 0.31, E{sub c} - 0.27, and E{sub c} - 0.16 eV. Diffusion in a chlorine-containing atmosphere introduces only a single level E4, but its concentration is 2.5 times lower, compared with diffusion in air. The values of the ionization energy of the Q3 level, measured under equilibrium (Hall effect) and nonequilibrium (capacitance spectroscopy) conditions, almost coincide. The deepest level E1 with an energy of E{sub c} - 0.54 eV, formed upon diffusion in both media, has no effect on the resistivity in the n base of the structures.

36 MATERIALS SCIENCE↗

Halogen diffusion on a Ga-stabilized ζ-GaAs(001)–(4 × 2) surface

The atomic and electronic structure of a Ga-stabilized GaAs(001) surface with the ζ(4 × 2) reconstruction and halogens in a number of symmetric sites on the surface are calculated by the plane-wave projector augmented wave method. The energy barriers of halogen-atom diffusion on this surface are calculated, which allow determination of the most preferred paths of their migration. It is shown that there is a low barrier (0.17–0.23 eV) for the diffusion of all halogens under consideration (I, Br, Cl, F) along the surface gallium dimer, whereas the barrier is significantly higher for diffusion between adjacent gallium dimers. In general, the energy barriers for halogen diffusion in both directions ([110] and [1-10]) point to their high surface mobility, despite high binding energies at a number of surface adsorption sites.

36 MATERIALS SCIENCE↗

Grassmannian Diffusion Maps--Based Dimension Reduction and Classification for High-Dimensional Data

This work introduces the Grassmannian diffusion maps (GDMaps), a novel nonlinear dimensionality reduction technique that defines the affinity between points through their representation as low-dimensional subspaces corresponding to points on the Grassmann manifold. Here, the method is designed for applications, such as image recognition and data-based classification of constrained high-dimensional data where each data point itself is a high-dimensional object (i.e., a large matrix) that can be compactly represented in a lower-dimensional subspace. The GDMaps is composed of two stages. The first is a pointwise linear dimensionality reduction wherein each high-dimensional object is mapped onto the Grassmann manifold representing the low-dimensional subspace on which it resides. The second stage is a multipoint nonlinear kernel-based dimension reduction using diffusion maps to identify the subspace structure of the points on the Grassmann manifold. To this end, an appropriate Grassmannian kernel is used to construct the transition matrix of a random walk on a graph connecting points on the Grassmann manifold. Spectral analysis of the transition matrix yields low-dimensional Grassmannian diffusion coordinates embedding the data into a low-dimensional reproducing kernel Hilbert space. Further, a novel data classification/recognition technique is developed based on the construction of an overcomplete dictionary of reduced dimension whose atoms are given by the Grassmannian diffusion coordinates. Three examples are considered. First, a "toy" example shows that the GDMaps can identify an appropriate parametrization of structured points on the unit sphere. The second example demonstrates the ability of the GDMaps to revealing the intrinsic subspace structure of high-dimensional random field data. In the last ex- ample, a face recognition problem is solved considering face images subject to varying illumination conditions, changes in face expressions, and occurrence of occlusions. The technique presented high recognition rates (i.e., 95% in the best case) using a fraction of the data required by conventional methods.

42 ENGINEERING↗

A Generalization of Threshold-Based and Probability-Based Models of Information Diffusion

Diffusion of information through complex networks is of interest in studies such as propagation prediction and influence maximization, both of which have applications in viral marketing and rumor controlling. There are a variety of information diffusion models, all of which simulate the adoption and spread of information over time. However, there is a lack of understanding of whether, despite their conceptual differences, these models represent the same underlying generative structures. For instance, if two different models utilize different conceptual mechanisms, but generate the same results, does the choice of model matter? A classification of diffusion of information models is developed based on the neighbor knowledge of the model infection requirement and the stochasticity of the model. This classification allows for the identification of models that fall into each respective category. The study involves the analysis of the following agent-based models on directed scale-free networks: (1) a linear absolute threshold model (LATM), (2) a linear fractional threshold model (LTFM), (3) the independent cascade model (ICM), (4) Bass-Rand-Rust model (BRRM) (5) a stochastic linear absolute threshold model (SLATM) (6) a stochastic fractional threshold model (SLFTM), and (7) Dodds–Watts model (DWM). Through the execution of simulations and analysis of the experimental results, the distinctive properties of each model are identified. Our analysis reveals that similarity in conceptual design does not imply similarity in behavior concerning speed, final state of nodes and edges, and sensitivity to parameters. Therefore, we highlight the importance of considering the unique behavioral characteristics of each model when selecting a suitable information diffusion model for a particular application.

97 MATHEMATICS AND COMPUTING↗

Estimating the Diffusion Coefficient of Lithium in Graphite: Extremely Fast Charging and a Comparison of Data Analysis Techniques

Galvanostatic intermittent titration experiments were performed in three-electrode cells to characterize the effect of C/2, 2-C and 4-C charge rates on the observed lithium diffusion coefficient. As part of the data analysis process, we compared the classic Weppner-Huggins analysis of polarization data with a newer (Wang et al.) analysis method for depolarization data. At low values of x in Li x C 6 , both analysis methods showed the same general trend in the apparent lithium diffusion coefficient, 4-C > 2-C > C/2. The two techniques differed in the magnitude of the estimated diffusion coefficient by about a factor of 100. The observed increase in diffusion coefficient does not last over a large compositional range. Since the estimates from the method of Weppner and Huggins may contain artifacts due to the use of particulate electrodes and high charge rates, the method of Wang et al. may produce better values.

25 ENERGY STORAGE↗

Extension of the PINN diffusion model to k-eigenvalue problems

This paper extends our recent work on the Physics-Informed Neural Networks (PINN) approach for the fixed source diffusion models and applies it to the diffusion theory based k-eigenvalue problems. To make the PINN equitable for the eigenvalue problems, we introduce a novel integral regularization term to the loss function in the framework, and allow the direct inference of the principal eigenvalue and the associated eigenfunction. The regularization term enforces a pre-defined value on the integration of the model predictions, and this value can be directly related to a physical property of the system. We also introduce an additional learnable parameter to approximate the principal eigenvalue. As a proof of principle, we solve the one-group two-dimensional k-eigenvalue neutron diffusion equation in this work. We then provide two numerical examples to demonstrate the applicability of the PINN approach. In each example, we solve the k-eigenvalue diffusion equation in a multi-region configuration constrained with a set of Robin boundary conditions for generality. We use a FEM solution based on the power-iteration method to verify the results of the PINN solution. The results showed relative percentage error in the predicted eigenvalue of about 0.77% and about 1.2% for example 1 and example 2, respectively. The mean absolute error in the predicted flux for example 1 is ∼ 0.002 and for example 2 is ∼ 0.0024. These results indicate some preliminary successes of the PINN application to k-eigenvalue problems. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Method for more accurate transmittance measurements of low-angle scattering samples using an integrating sphere with an entry port beam diffuser

For most integrating sphere measurements, the difference in light distribution between a specular reference beam and a diffused sample beam can result in significant errors. The problem becomes especially pronounced in integrating spheres that include a port for reflectance or diffuse transmittance measurements. The port is included in many standard spectrophotometers to facilitate a multipurpose instrument, however, absorption around the port edge can result in a detected signal that is too low. The absorption effect is especially apparent for low-angle scattering samples, because a significant portion of the light is scattered directly onto that edge. In this paper, a method for more accurate transmittance measurements of low-angle light-scattering samples is presented. The method uses a standard integrating sphere spectrophotometer, and the problem with increased absorption around the port edge is addressed by introducing a diffuser between the sample and the integrating sphere during both reference and sample scan. This reduces the discrepancy between the two scans and spreads the scattered light over a greater portion of the sphere wall. The problem with multiple reflections between the sample and diffuser is successfully addressed using a correction factor. The method is tested for two patterned glass samples with low-angle scattering and in both cases the transmittance accuracy is significantly improved.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Predicting Ga and Cu Profiles in Co-Evaporated Cu(In,Ga)Se 2 Using Modified Diffusion Equations and a Spreadsheet

Cu(In,Ga)Se 2 (CIGS) photovoltaic absorbers frequently develop Ga gradients during growth. These gradients vary as a function of growth recipe, and are important to device performance. Prediction of Ga profiles using classic diffusion equations is not possible because In and Ga atoms occupy the same lattice sites and thus diffuse interdependently, and there is not yet a detailed experimental knowledge of the chemical potential as a function of composition that describes this interaction. Here, we show how diffusion equations can be modified to account for site sharing between In and Ga atoms. The analysis has been implemented in an Excel spreadsheet, and outputs predicted Cu, In, and Ga profiles for entered deposition recipes. A single set of diffusion coefficients and activation energies are chosen, such that simulated elemental profiles track with published data and those from this study. Extent and limits of agreement between elemental profiles predicted from the growth recipes and the spreadsheet tool are demonstrated.

14 SOLAR ENERGY↗

Multispecies Diffusion Capability For The AMP Nuclear Fuel Performance Code (LANL Milestone M31MS060301 Final Report)

This work addresses only diffusion. The contact solver in AMP was not sufficiently developed this year to attempt treatment of species contact. A cylindrical tensor diffusion coefficient model was added to the AMP code, with the KHHS model [1] implemented into the AMP material library as a specific example. A cylindrical tensor diffusion operator manufactured solution verification example was coded. Before meeting the full text of the milestone task, it remains to: (1) code and run a cylindrical tensor diffusion solver manufactured solution (2) code and run the validation example of [1] (3) document results. These are dependent on developing new capabilities for the AMP code requiring close collaboration with the AMP team at ORNL. The model implemented provides a good intermediate first step toward a general multi-species solver. The multi-species capability of the AMP nuclear fuel code [2] is intended to allow the modeling of radiation-driven redistribution of various elements through solid metal nuclear reactor fuels. The initial model AMP provides for U-Pu-Zr fuels is based on the analysis of the Integral Fast Reactor (IFR) fuel development program experiment X419 post-irradiation data described in [1], referred to here as the KHHS model. This model may be specific to that experiment, but it was thought to provide a good start for the AMP code, because it (1) is formulated at the engineering scale, (2) decouples the species from each other, (3) predetermines the phase boundaries so that reference to a phase diagram is not needed, and (4) one of the authors (Hayes) was the NEAMS Fuels IPSC manager for FY11. The KHHS model is formulated for radial fluxes as little axial redistribution is seen experimentally. As U-Pu-Zr fuel is irradiated, the constituents migrate to form three annular regions. The center region is Zr-enriched and U-depleted, the middle region is Zr-depleted and U-enriched, and the outer region is Zr-enriched and U-depleted. The Pu concentration stays roughly constant throughout with slight enrichment in the center and depletion near the surface. Pu acts as a solvent for the mixture. The experiment was only run to 1.9% burnup, so the model is not at this time applicable to the high-burnup scenarios that the AMP code is intended to eventually model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High Speed, Low Cost Fabrication of Gas Diffusion Electrodes for Membrane Electrode Assemblies

Fabrication of membrane electrode assemblies (MEAs) depends on creating inks or pastes of catalyst and binder, and applying this suspension to either the membrane (catalyst coated membrane) or gas diffusion media (gas diffusion electrode) and respectively laminating either gas diffusion media or gas diffusion electrodes (GDEs) to the membrane. One barrier to cost effective fabrication for either of these approaches is the development of stable and consistent suspensions. This program investigated the fundamental forces that destabilize the suspensions and developed innovative approaches to create new, highly stable formulations.

08 HYDROGEN↗

Field Testing of an Unvented Roof with Fibrous Insulation, Tiles and Vapor Diffusion Venting

This research is a test implementation of an unvented tile roof assembly in a hot-humid climate (Orlando, FL; Zone 2A), insulated with air permeable insulation (netted and blown fiberglass). Given the localized moisture accumulation and failures seen in previous unvented roof field work, it was theorized that a 'diffusion vent' (water vapor open, but air barrier 'closed') at the highest points in the roof assembly might allow for the wintertime release of moisture, to safe levels. The 'diffusion vent' is an open slot at the ridge and hips, covered with a water-resistant but vapor open (500+ perm) air barrier membrane. As a control comparison, one portion of the roof was constructed as a typical unvented roof (self-adhered membrane at ridge). The data collected to date indicate that the diffusion vent roof shows greater moisture safety than the conventional, unvented roof design. The unvented roof had extended winter periods of 95-100% RH, and wafer (wood surrogate RH sensor) measurements indicating possible condensation; high moisture levels were concentrated at the roof ridge. In contrast, the diffusion vent roofs had drier conditions, with most peak MCs (sheathing) below 20%. In the spring, as outdoor temperatures warmed, all roofs dried well into the safe range (10% MC or less). Some roof-wall interfaces showed moderately high MCs; this might be due to moisture accumulation at the highest point in the lower attic, and/or shading of the roof by the adjacent second story. Monitoring will be continued at least through spring 2016 (another winter and spring).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

M4FT-16LL080303052-State of Knowledge for Colloid Facilitated Radionuclide Transport and Update on Actinide Diffusion in Bentonite Backfill

This progress report (Level 4 Milestone Number M4FT-16LL080303052) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Crystalline Disposal R&D Activity Number FT-16LL080303051 and Crystalline International Collaborations Activity Number FT-16LL080303061. The focus of this research is the interaction of radionuclides with Engineered Barrier System (EBS) and host rock materials at various physico-chemical conditions relevant to subsurface repository environments. They include both chemical and physical processes such as solubility, sorption, and diffusion. The colloid-facilitated transport effort focused on preparation of a draft manuscript summarizing the state of knowledge and parameterization of colloid-facilitated transport mechanisms in support of reactive transport and performance assessment models for generic crystalline repositories. This draft manuscript is being submitted as a level 3 milestone with LANL as the primary author. LLNL’s contribution to that effort is summarized only briefly in the present report. A manuscript summarizing long-term U(VI) diffusion experiments through bentonite backfill material was recently accepted for publication; the contents of that manuscript are summarized in the present report. The Np(IV) diffusion experiments were started mid-year and are ongoing. The completion of these experiments is planned for early FY17. Our progress in quantifying Np(IV) diffusion in bentonite backfill is summarized in the present report. Our involvement with the NEA TDB project was summarized in a recent Argillite Disposal activity report. It is not included in this report.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Milestone report: The simulation of radiation driven gas diffusion in UO 2 at low temperature

Below 1000 K it is thought that fission gas diffusion in nuclear fuel during irradiation occurs through atomic mixing due to radiation damage. This is an important process for nuclear reactor performance as it affects fission gas release, particularly from the periphery of the pellet where such temperatures are normal. Here we present a molecular dynamics study of Xe and Kr diffusion due to irradiation. Thermal spikes and cascades have been used to study the electronic stopping and ballistic phases of damage, respectively. Our results predict that O and Kr exhibit the greatest diffusivity and U the least, while Xe lies in between. It is concluded that the ballistic phase does not sufficiently account for the experimentally observed diffusion. Preliminary thermal spike calculations indicate that the electronic stopping phase generates greater fission gas displacement than the ballistic phase, although further calculation must be carried out to confirm this. A good description of the system by the empirical potentials is important over the very wide temperatures induced during thermal spike and damage cascade simulations. This has motivated the development of a parameter set for gas-actinide and gas-oxygen interactions that is complementary for use with a recent many-body potential set. A comprehensive set of density functional theory (DFT) calculations were used to study Xe and Kr incorporation at a number of sites in CeO 2 , ThO 2 , UO 2 and PuO 2 . These structures were used to fit a potential, which was used to generate molecular dynamics (MD) configurations incorporating Xe and Kr at 300 K, 1500 K, 3000 K and 5000 K. Subsequent matching to the forces predicted by DFT for these MD configurations was used to refine the potential set. This fitting approach ensured weighted fitting to configurations that are thermodynamically significant over a broad temperature range, while avoiding computationally expensive DFT-MD calculations. The resultant gas potentials were validated against DFT binding energies and are suitable for simulating combinations of Xe and Kr in solid solutions of CeO 2 , ThO 2 , UO 2 and PuO 2 , providing a powerful tool for the atomistic simulation of conventional nuclear reactor fuel UO 2 as well as advanced MOX fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Final Report: Towards an Emergent Model of Technology Adoption for Accelerating the Diffusion of Residential Solar PV

This project sought to enable electric utilities in Texas to accelerate diffusion of residential solar photovoltaic (PV) by systematically identifying and targeting existing barriers to PV adoption. A core goal of the project was to develop an integrated research framework that combines survey research, econometric modeling, financial modeling, and implementation and evaluation of pilot projects to study the PV diffusion system. This project considered PV diffusion as an emergent system, with attention to the interactions between the constituent parts of the PV socio-technical system including: economics of individual decision-making; peer and social influences; behavioral responses; and information and transaction costs. We also conducted two pilot projects, which have yielded new insights into behavioral and informational aspects of PV adoption. Finally, this project has produced robust and generalizable results that will provide deeper insights into the technology-diffusion process that will be applicable for the design of utility programs for other technologies such as home-energy management systems and plug-in electric vehicles. When we started this project in 2013 there was little systematic research on characterizing the decision-making process of households interested in adopting PV. This project was designed to fill that research gap by analyzing the PV adoption process from the consumers' decision-making perspective and with the objective to systematically identifying and addressing the barriers that consumers face in the adoption of PV. The two key components of that decision-making process are consumers' evaluation of: (i) uncertainties and non-monetary costs associated with the technology and (ii) the direct monetary cost-benefit. This project used an integrated approach to study both the non-monetary and the monetary components of the consumer decision-making process.

14 SOLAR ENERGY↗

Calculations of hydrogen diffusivity in Zr-based alloys: Influence of alloying elements and effect of stress

This report summarizes the progress on modeling hydrogen diffusivity in Zr-based alloys. The presence of hydrogen (H) can detrimentally affect the mechanical properties of many metals and alloys. To mitigate these detrimental effects requires fundamental understanding of the thermodynamics and kinetics governing H pickup and hydride formation. In this work, we focus on H diffusion in Zr-based alloys by studying the effects of alloying elements and stress, factors that have been shown to strongly affect H pickup and hydride formation in nuclear fuel claddings. A recently developed accelerated kinetic Monte Carlo method is used for the study. It is found that for the alloys considered here, H diffusivity depends weakly on composition, with negligible effect at high temperatures in the range of 600-1200 K. Therefore, the small variation in compositions of these alloys is likely not a major cause of the very different H pickup rates. In contrast, stress strongly affects H diffusivity. This effect needs to be considered for studying hydride formation and delayed hydride cracking.

36 MATERIALS SCIENCE↗

Diffusion Behavior of Oversized Fission Products in bcc Fe Cladding: A First-Principles Study

Fuel-Cladding Chemical Interaction (FCCI) poses significant challenges in nuclear reactors, where fission products from nuclear fuel interact with Fe-based cladding materials, potentially compromising their structural integrity. This study investigates the diffusion behavior of oversized fission products, Pr, Nd, Ce, and La, within bcc Fe cladding using density functional theory (DFT), nudged elastic band (NEB) method, and self-consistent mean field (SCMF) theory. Our results reveal significant long-range vacancy binding energies, particularly up to the 6th nearest neighbor, with La exhibiting the strongest binding affinity, followed by Nd, Ce, and Pr. The NEB calculations indicate significant high barriers for the dissociation of 1nn vacancy-solute pairs for all fission products. The tracer diffusion coefficients of these fission products was derived in Arrhenius form. The significant trapping effect of vacancies by a very dilute amount of fission products reduces vacancy mobility, leading to an oversaturation of point defects, void nucleation, and swelling. These are critical issues for irradiated cladding materials. The tracer diffusion coefficients indicate that Nd diffuses the fastest, followed by La, Ce, and Pr. This study provides essential insights for developing advanced cladding materials and design strategies to mitigate FCCI, ultimately enhancing nuclear reactor safety and performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗