Search NASA⌕ Search

SEARCH · Search NASA

Results for “Function approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Comparison of Hirs' equation with Moody's equation for determining rotordynamic coefficients of annular pressure seals

The rotordynamic coefficients of an incompressible-flow annular pressure seal were determined using a bulk-flow model in conjunction with two different friction factor relationships. The first, Hirs' equation, assumes the friction factor is a function of Reynolds number only. The second, Moody's equation, approximates Moody's diagram and assumes the friction factor is a function of both Reynolds number and relative roughness. For each value of relative roughness, Hirs' constants were determined so that both equations gave the same magnitude and slope of the friction factor. For smooth seals, both relationships give the same results. For rough seals, Moody's equation predicts 44 percent greater direct stiffness, 35 percent greater cross-coupled stiffness, 19 percent smaller cross-coupled damping, 59 percent smaller cross-coupled inertia, and nominally the same direct damping and direct inertia.

Nelson, C. C.↗
NASA NTRS1993

Program Determines Minimum-State Approximations To Unsteady Aerodynamic Forces

MIST implements minimum-state method for determining rational approximations of matrix of aerodynamic force coefficients. Accepts complex tabular data representing generalized unsteady aerodynamic forces over set of reduced frequencies. Determines approximations to tabular data in Laplace domain by use of rational functions. Provides capability to select coefficients of denominator in rational approximations, to constrain approximation selectably without increasing size of problem, and determines and emphasizes criticial frequency ranges in determining approximations. Written in ANSI FORTRAN 77.

Karpel, Mordechay↗
NASA NTRS1991

Closed-loop transfer recovery with observer-based controllers. I - Analysis

The description of a novel problem in loop transfer recovery is presented. The problem of closed-loop recovery (CLTR) is examined using a measurement feedback-control law where the closed-loop transfer function from the external signal to the controlled output can be made either exactly equal or approximately close to the so-called target closed-loop transfer function achieved under full-state feedback. The analysis of CLTR applies specifically to the general class of observer-based controllers and focuses on three fundamental issues. The first issue is concerned with what can and cannot be achieved for a given system and for an arbitrary target closed-loop transfer function. The second issue is to develop necessary and/or sufficient conditions for a target closed-loop transfer function to be recoverable either exactly or approximately. The third issue deals with the necessary and/or sufficient conditions on a given system such that it has at least one recoverable target closed-loop transfer function. The result is applied to the lateral autopilot design for a commercial transport airplane.

Chen, Ben M.↗
NASA NTRS1980

Analytic and approximate boundary-fitted coordinate systems for fluid flow simulation

A method for constructing a direct functional relation between the computational and physical domains such that boundaries in the computational domain map into boundaries in the physical domain is presented. This method which is called the 'two-boundary technique' is based on generating functions that represent two disconnected boundaries in the physical domain and an independent function which connects one boundary with another to generate grids. The suggested connecting functions are simple linear and cubic parametric polynomials with parameters based on position and derivatives at the disconnected boundaries. The boundaries can be defined by analytical, approximate, and tension spline functions; the grid density in specified regions is controlled by embedding contraction functions in either the boundary representation or the connecting function.

Smith, R. E.↗
DOE OSTI2021

Non-intrusive nonlinear model reduction via machine learning approximations to low-dimensional operators

Abstract Although projection-based reduced-order models (ROMs) for parameterized nonlinear dynamical systems have demonstrated exciting results across a range of applications, their broad adoption has been limited by their intrusivity: implementing such a reduced-order model typically requires significant modifications to the underlying simulation code. To address this, we propose a method that enables traditionally intrusive reduced-order models to be accurately approximated in a non-intrusive manner. Specifically, the approach approximates the low-dimensional operators associated with projection-based reduced-order models (ROMs) using modern machine-learning regression techniques. The only requirement of the simulation code is the ability to export the velocity given the state and parameters; this functionality is used to train the approximated low-dimensional operators. In addition to enabling nonintrusivity, we demonstrate that the approach also leads to very low computational complexity, achieving up to $$10^3{\times }$$ 10 3 × in run time. We demonstrate the effectiveness of the proposed technique on two types of PDEs. The domain of applications include both parabolic and hyperbolic PDEs, regardless of the dimension of full-order models (FOMs).

42 ENGINEERING↗
DOE OSTI2021

Twisted bilayer graphene. I. Matrix elements, approximations, perturbation theory, and a k · p two-band model

We investigate the twisted bilayer graphene (TBG) model of Bistritzer and MacDonald (BM) [Bistritzer and MacDonald, Proc. Natl. Acad. Sci. 108, 12233 (2011)] to obtain an analytic understanding of its energetics and wave functions needed for many-body calculations. We provide an approximation scheme for the wave functions of the BM model, which first elucidates why the BM K M -point centered original calculation containing only four plane waves provides a good analytical value for the first magic angle (θ M ≈ 1°). The approximation scheme also elucidates why most of the many-body matrix elements in the Coulomb Hamiltonian projected to the active bands can be neglected. By applying our approximation scheme at the first magic angle to a Γ M -point centered model of six plane waves, we analytically understand the reason for the small Γ M -point gap between the active and passive bands in the isotropic limit w 0 = w 1 . Furthermore, we analytically calculate the group velocities of the passive bands in the isotropic limit, and show that they are almost doubly degenerate, even away from the Γ M point, where no symmetry forces them to be. Furthermore, moving away from the Γ M and K M points, we provide an explicit analytical perturbative understanding as to why the TBG bands are flat at the first magic angle, despite the first magic angle is defined by only requiring a vanishing K M -point Dirac velocity. We derive analytically a connected “magic manifold” w 1 = $2\sqrt{1 + w^{2}_{0}}$ $-\sqrt{2 + 3w^2_0}$, on which the bands remain extremely flat as w 0 is tuned between the isotropic (w 0 = w 1 ) and chiral (w 0 = 0) limits. We analytically show why going away from the isotropic limit by making w 0 less (but not larger) than w 1 increases the Γ M -point gap between the active and the passive bands. Finally, by perturbation theory, we provide an analytic Γ M point k ∙ p two-band model that reproduces the TBG band structure and eigenstates within a certain w 0 , w 1 parameter range. Further refinement of this model are discussed, which suggest a possible faithful representation of the TBG bands by a two-band Γ M point k ∙ p model in the full w 0 , w 1 parameter range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Rational RBF-based partition of unity method for efficiently and accurately approximating 3D objects

We consider the problem of reconstructing 3D objects via meshfree interpolation methods. In this framework, we usually deal with large data sets and thus develop an efficient local scheme via the well-known partition of unity method. The main contribution in this paper consists in constructing the local interpolants for the implicit interpolation by means of rational radial basis functions. Numerical experiments, devoted to test the accuracy of the scheme, confirm that the proposed method is particularly performing when 3D objects, or more in general implicit functions defined by scattered points, need to be approximated.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Topological phase transition in LaAs under pressure

Using density functional theory (DFT) calculations with the screened hybrid functional of Heyd, Scuseria, and Ernzerhof (HSE06), we study the effects of hydrostatic pressure on the electronic properties of LaAs. We focus on the band crossing near the X point that can make LaAs a topological semimetal, discussing results of both DFT within the generalized gradient approximation (GGA) and the HSE06 hybrid functional. We find that in DFT-GGA, under the calculated equilibrium lattice parameter, LaAs displays a crossing between the highest As p band and the lowest La d band near the X point due to the overestimated p–d band overlap. Such crossing does not occur when the band overlap is corrected in the HSE06 calculation. However, we find that the p–d crossing can be induced in LaAs under hydrostatic pressure, showing a topological phase transition at ~7GPa. Furthermore, the rocksalt crystal structure of LaAs is predicted to be stable under applied pressure up to 20 GPa, in good agreement with experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Nuclear theory and event generators for charge-changing neutrino reactions

Semi-inclusive $CC\nu$ cross sections based on factorized cross sections are studied for a selection of spectral function models with the objective of facilitating the choice of models for use as input into event generators. The basic formalism for such cross sections is presented along with an introduction to constructing spectral functions for simple models based on the independent particle shell model (IPSM), the relativistic Fermi gas model (RFG) and a local density approximation (LDA) based on the RFG. Spectral functions for these models are shown for $^{16}$O along with a more sophisticated model which includes nucleon-nucleon interactions.. Inclusive and semi-inclusive cross sections are calculated for these models. Although the inclusive cross sections are all of similar size and shape, the semi-inclusive cross sections are subtantially different depending upon whether the spectral functions contain some features associated with the nuclear shell model or are based on the RFG and LDA models. Here, calculations of average values and standard deviations of the initial neutrino energy using the semi-inclusive cross section for the various models are presented and indicate that there may be simple kinematical descriptions of the average neutrino energy which is common to all of these models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1995

A 3D High-Order Unstructured Finite-Volume Algorithm for Solving Maxwell's Equations

A three-dimensional finite-volume algorithm based on arbitrary basis functions for time-dependent problems on general unstructured grids is developed. The method is applied to the time-domain Maxwell equations. Discrete unknowns are volume integrals or cell averages of the electric and magnetic field variables. Spatial terms are converted to surface integrals using the Gauss curl theorem. Polynomial basis functions are introduced in constructing local representations of the fields and evaluating the volume and surface integrals. Electric and magnetic fields are approximated by linear combinations of these basis functions. Unlike other unstructured formulations used in Computational Fluid Dynamics, the new formulation actually does not reconstruct the field variables at each time step. Instead, the spatial terms are calculated in terms of unknowns by precomputing weights at the beginning of the computation as functions of cell geometry and basis functions to retain efficiency. Since no assumption is made for cell geometry, this new formulation is suitable for arbitrarily defined grids, either smooth or unsmooth. However, to facilitate the volume and surface integrations, arbitrary polyhedral cells with polygonal faces are used in constructing grids. Both centered and upwind schemes are formulated. It is shown that conventional schemes (second order in Cartesian grids) are equivalent to the new schemes using first degree polynomials as the basis functions and the midpoint quadrature for the integrations. In the new formulation, higher orders of accuracy are achieved by using higher degree polynomial basis functions. Furthermore, all the surface and volume integrations are carried out exactly. Several model electromagnetic scattering problems are calculated and compared with analytical solutions. Examples are given for cases based on 0th to 3rd degree polynomial basis functions. In all calculations, a centered scheme is applied in the interior, while an upwind matching scheme is employed at material interfaces and the Engquist-Majda non-reflecting boundary condition is implemented at the numerical outer boundaries. The staggered leapfrog scheme and the Runge-Kutta methods are utilized for the time integration. Excellent agreements are found between the numerical and analytical solutions.

Liu, Yen↗
DOE OSTI2022

Bayesian Monte Carlo Evaluation Framework for Imperfect Data and Models [Abstract]

Nuclear data evaluation methods conventionally make the following assumptions: prior and posterior probability distribution functions (PDFs) of all model parameters and data are normal (Gaussian); the linear approximation is sufficiently accurate for minimization of a cost function (even for non-linear models); and that both the model (of, e.g., neutron cross section) and experimental data (including their covariance data) are perfect. These assumptions are inherent to the well-known generalized linear least squares (GLLS) minimization method commonly used for evaluations of resolved resonance region (RRR) neutron cross sections. However, these assumptions are often not justified due to the presence of non-normal PDFs, non-linear models (e.g. R -matrix formalism), and inherent imperfections in data and models (e.g. discrepant data sets, discrepancies between the previous evaluation and newly measured data, or imperfect covariance data). We remove the said assumptions in a mathematical framework of Bayes’ theorem, and implement it using the Metropolis-Hastings Monte Carlo method. Parameters of a new kind are introduced to parameterize inherent imperfections, e.g. , any discrepancies between the theoretical model and measured data. These new parameters enable evaluators to quantify their expert judgement about any discrepancies or imperfections in a reproducible manner. We demonstrate the framework with an ongoing evaluation of 233 U in the eV region using the ENDF-B/VIII library and transmission data measured by Guber, et al. , and compare the posterior parameters to those obtained by conventional evaluation methods.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Optimal Bandwidth for Multitaper Spectrum Estimation

A systematic method for bandwidth parameter selection is desired for Thomson multitaper spectrum estimation. We give a method for determining the optimal bandwidth based on a mean squared error (MSE) criterion. When the true spectrum has a second-order Taylor series expansion, one can express quadratic local bias as a function of the curvature of the spectrum, which can be estimated by using a simple spline approximation. This is combined with a variance estimate, obtained by jackknifing over individual spectrum estimates, to produce an estimated MSE for the log spectrum estimate for each choice of time-bandwidth product. The bandwidth that minimizes the estimated MSE then gives the desired spectrum estimate. Additionally, the bandwidth obtained using our method is also optimal for cepstrum estimates. We give an example of a damped oscillatory (Lorentzian) process in which the approximate optimal bandwidth can be written as a function of the damping parameter. Furthermore, the true optimal bandwidth agrees well with that given by minimizing estimated the MSE in these examples.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1979

The adiabatic semiclassical perturbation theory for vibrationally inelastic scattering. I - Collinear calculations. II - Three-dimensional treatment

A semiclassical approximation to treat vibrationally inelastic scattering is developed. The vibrational basis set used is adiabatic with respect to a reference potential which is chosen to be as close as possible to the true potential and also gives easily obtainable solutions to the vibrational wave equation. The radial wave functions are obtained using the WKB approximation, and the coupled Schroedinger equations are solved by a first-order perturbation method to yield a phase shift matrix which is exponentiated to give the full scattering matrix. Results were obtained for all the cases computed by Secrest and Johnson and by Clark and Dickinson, and the agreement is better than 10% for half of the cross-sections and rarely off by more than a factor of 2.

Cross, R. J., Jr.↗
NASA NTRS1992

Scattering from arbitrarily shaped microstrip patch antennas

The scattering properties of arbitrarily shaped microstrip patch antennas are examined. The electric field integral equation for a current element on a grounded dielectric slab is developed for a rectangular geometry based on Galerkin's technique with subdomain rooftop basis functions. A shape function is introduced that allows a rectangular grid approximation to the arbitrarily shaped patch. The incident field on the patch is expressed as a function of incidence angle theta(i), phi(i). The resulting system of equations is then solved for the unknown current modes on the patch, and the electromagnetic scattering is calculated for a given angle. Comparisons are made with other calculated results as well as with measurements.

Shively, David G.↗
DOE OSTI2022

On the choice of reference orbitals for linear-response calculations of solution-phase K-edge X-ray absorption spectra

The simplest response theory methods for computing vertical excitation spectra in condensed-phase are configuration interaction with single excitations (CIS) and linear-response time-dependent density functional theory (TDDFT) within the Tamm–Dancoff approximation. In applications to X-ray absorption spectroscopy (XAS), methods like CIS and TDDFT that codify only single excitations into the wave function are prone to catastrophic errors in main-edge and post-edge features whose shapes act as a crucial fingerprint in structural analyses of liquids. Here, we show that these errors manifest primarily due to a lack of orbital relaxation in conventional linear-response theories and that core-ionized (n - 1-electron) references, like those of electron-affinity TDDFT, can eliminate the errors in the spectral profile, even in the highest-energy parts of the post-edge. Crucially, we find that single excitations atop core-ionized references are sufficient to elucidate liquid-phase XAS spectra with semi-quantitative accuracy, opening the door for methods like electron-affinity CIS/TDDFT to be used as efficient alternatives to higher-order wave function approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Development of the self-consistent approximation and its application to the problem of magnetoelastic resonance in an inhomogeneous medium

Our previously proposed approximation involving both the first and second terms of the expansion of the vertex function is generalized to the system of two interacting wavefields of different physical nature. A system of self-consistent equations for the matrix Green’s function and matrix vertex function is derived. On the basis of this matrix generalization of the new self-consistent approximation, a theory of magnetoelastic resonance is developed for a ferromagnetic model, where the magnetoelastic coupling parameter ε(x) is inhomogeneous. Equations for magnetoelastic resonance are analyzed for one-dimensional inhomogeneities of the coupling parameter. The diagonal and off-diagonal elements of the matrix Green’s function of the system of coupled spin and elastic waves are calculated with the change in the ratio between the average value ε and rms fluctuation Δε of the coupling parameter between waves from the homogeneous case (ε ≠ 0, Δε = 0) to the extremely randomized case (ε = 0, Δε ≠ 0) at various correlation wavenumbers of inhomogeneities k{sub c}. For the limiting case of infinite correlation radius (k{sub c} = 0), in addition to approximate expressions, exact analytical expressions corresponding to the summation of all diagrams of elements of the matrix Green’s function are obtained. The results calculated for an arbitrary k{sub c} value in the new self-consistent approximation are compared to the results obtained in the standard self-consistent approximation, where only the first term of the expansion of the vertex function is taken into account. It is shown that the new approximation corrects disadvantages of the Green’s functions calculated in the standard approximation such as the dome shape of resonances and bends on the sides of resonance peaks. The appearance of a fine structure of the spectrum in the form of a narrow resonance on the Green’s function of spin waves and a narrow antiresonance on the Green’s function of elastic waves, which was previously predicted in the standard self-consistent approximation, is confirmed. With an increase in the parameter k{sub c}, the Green’s functions calculated in the standard and new approximations approach each other and almost coincide with each other at k{sub c}/k ≥ 0.5. At the same time, the results of this work indicate that the new self-consistent approximation has a certain advantage for studying the problems of stochastic radiophysics in media with long-wavelength inhomogeneities (small k{sub c} values), because it describes both the shape and width of peaks much better than the standard approximation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1992

The role of under-determined approximations in engineering and science application

There is currently a great deal of interest in using response surfaces in the optimization of aircraft performance. The objective function and/or constraint equations involved in these optimization problems may come from numerous disciplines such as structures, aerodynamics, environmental engineering, etc. In each of these disciplines, the mathematical complexity of the governing equations usually dictates that numerical results be obtained from large computer programs such as a finite element method program. Thus, when performing optimization studies, response surfaces are a convenient way of transferring information from the various disciplines to the optimization algorithm as opposed to bringing all the sundry computer programs together in a massive computer code. Response surfaces offer another advantage in the optimization of aircraft structures. A characteristic of these types of optimization problems is that evaluation of the objective function and response equations (referred to as a functional evaluation) can be very expensive in a computational sense. Because of the computational expense in obtaining functional evaluations, the present study was undertaken to investigate under-determinined approximations. An under-determined approximation is one in which there are fewer training pairs (pieces of information about a function) than there are undetermined parameters (coefficients or weights) associated with the approximation. Both polynomial approximations and neural net approximations were examined. Three main example problems were investigated: (1) a function of one design variable was considered; (2) a function of two design variables was considered; and (3) a 35 bar truss with 4 design variables was considered.

Carpenter, William C.↗
DOE OSTI2025

Efficient sampling of free energy landscapes with functions in Sobolev spaces

Molecular simulations of biological and physical phenomena generally involve sampling complicated, rough energy landscapes characterized by multiple local minima. In this work, we introduce a new family of methods for advanced sampling that draw inspiration from functional representations used in machine learning and approximation theory. As shown here, such representations are particularly well suited for learning free energies using artificial neural networks. As a system evolves through phase space, the proposed methods gradually build a model for the free energy as a function of one or more collective variables, from both the frequency of visits to distinct states and generalized force estimates corresponding to such states. Implementation of the methods is relatively simple and, more importantly, for the representative examples considered in this work, they provide computational efficiency gains of up to several orders of magnitude over other widely used simulation techniques.

Approximation theory↗