Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geologic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Highlighting the complexities of a groundwater pilot study during an avian influenza outbreak: Methods, lessons learned, and select contaminant results

The highly pathogenic avian influenza (H5N2) outbreak in the Midwestern United States (US) in 2015 was historic due to the number of birds and poultry operations impacted and the corresponding economic loss to the poultry industry and was the largest animal health emergency in US history. The U.S. Geological Survey (USGS), with the assistance of several state and federal agencies, aided the response to the outbreak by developing a study to determine the extent of virus transport in the environment. The study goals were to: develop the appropriate sampling methods and protocols for measuring avian influenza virus (AIV) in groundwater, provide the first baseline data on AIV and outbreak- and poultry-related contaminant occurrence and movement into groundwater, and document climatological factors that may have affected both survival and transport of AIV to groundwater during the months of the 2015 outbreak. While site selection was expedient, there were often delays in sample response times due to both relationship building between agencies, groups, and producers and logistical time constraints. This study's design and sampling process highlights the unpredictable nature of disease outbreaks and the corresponding difficulty in environmental sampling of such events. The lessons learned, including field protocols and approaches, can be used to improve future research on AIV in the environment. - Highlights: • Historic 2015 avian influenza outbreak resulted in over 50 million birds destroyed. • Study to determine environmental extent of virus transport logistically challenging. • Challenges included communication, relationship building, and safety protocols. • Temperature, precipitation may have favored virus survival, transport to subsurface.

54 ENVIRONMENTAL SCIENCES↗

Assignment and calibration of relative permeability by hydrostratigraphic units for multiphase flow analysis, case study: CO 2 -EOR operations at the Farnsworth Unit, Texas

Included in the most critical factors for geological CO 2 storage site screening, selection, and operation is effective simulations of multiphase flow and transport. Relative permeability is probably the greatest source of potential uncertainty in multiphase flow simulation, second only to intrinsic permeability heterogeneity. The specific relative permeability relationship assigned greatly impacts forecasts of CO 2 trapping mechanisms, phase behavior, and long-term plume movement. A primary goal of this study is to evaluate the impacts and implications of different methods of assigning relative permeability relationships for CO 2 -EOR model forecasts. Most simulation studies published in the literature base selection of relative permeability functions on the geologic formation or rock type alone. In this study, we initially implemented reservoir model grids with previously-identified hydrostratigraphic units based on porosity and permeability relationship of the Morrow ‘B’ Sandstone, then assigned relative permeability functions for those hydrostratigraphic units. Specific, constrained relative permeability relationships were created and assigned to each hydrostratigraphic unit using petrophysical data and Mercury Intrusion Capillary Pressure (MICP) measurements, from core samples of each hydrostratigraphic unit. Results of forward simulations with the newly-calibrated models will be compared to those of previous models as well as to simulation results for a range of different relative permeability relationships. The study site is the Farnsworth Unit (FWU) in the northeast Texas Panhandle, an active CO 2 -EOR operation. The target formation is the Morrow ‘B’ Sandstone, a clastic formation composed of medium to course sands.

58 GEOSCIENCES↗

14C and U-series disequilibria age constraints from recent eruptions at Sete Cidades volcano, Azores

Accurate dating of young (<10 ka) volcanic rocks poses numerous challenges, yet determining eruption ages is critical to understanding magmatic evolution and hazards associated with active volcanic centers. 14C dating is the preferred technique for dating young geologic materials, but a few studies have suggested that volcanic degassing can result in erroneously old 14C dates (e.g. Pasquier-Cardin et al., 1999). Finding an isotopic system with which to accurately constrain eruptive recurrence intervals at recently active volcanic centers is critical to assessing future volcanic hazards. In this study, we have obtained 14C data from modern terrestrial gastropods on Sa~o Miguel island, Azores to assess the current impact of volcanic degassing on 14C ages near active and extinct volcanic centers, and for one active volcanic center, we have compared 14C of paleosols with 226Ra-230Th maximum eruptive ages for pumices immediately overlying the respective paleosols. 14C ages of the modern terrestrial gastropod Cornu aspersum demonstrate the effects of dilution from a range of current outgassing levels at three active trachytic stratovolcanoes on Sa~o Miguel island: Sete Cidades, Fogo, Furnas, as well as the extinct Povoac¸a~o volcano. A modern gastropod sampled at Furnas, where there is evidence of extensive present-day degassing, has a 14C age of 394 ±97 y cal BP. At Fogo volcano, also a location with active degassing, the 14C age of a modern gastropod is 1324 ±60 y cal BP. Both of these ages clearly show effects of dilution of atmospheric 14C due to volcanic degassing. In contrast, there is currently no apparent outgassing occurring at Sete Cidades or Povoac¸a~o, and modern gastropod ages from these volcanoes are post-bomb. We also obtained 14C data from paleosols and 226Ra-230Th ages associated pumices from the youngest eruptive sequence of Sete Cidades volcano, the Pepom P1-P17 deposits, the ages of which are poorly constrained but thought to be <5,000 y (Queiroz, 1997). 226Ra-230Th disequilibrium in a P1 glass separate indicates a maximum eruptive age of 4440 ±195 y. 14C ages of paleosols below P1 and P3 are older than those derived from 226Ra-230Th dating, at 7293 ±141 y cal BP and 7698 ± 172 y cal BP, respectively. We interpret the 14C ages as being erroneously old due to abundant volcanic degassing at the time of eruption. Similarly, but to a lesser extent, the 226Ra-230Th maximum eruptive age of glass separated from the P8 eruption is 2659 ±55 y, whereas the age of the paleosol sampled directly beneathP8 is older (3054 ±194 y BP). In contrast, paleosols sampled at multiple field localities from below the most recent eruptive deposit (P17) are within error of each other (476 ±56 cal y BP and 585 ±68 cal y BP), while 226Ra-230Th maximum eruptive ages in glass separates from two different P17 sampling sites are 762 ±14 y and 730 y ±15 y. This is consistent with the observation that Sete Cidades volcano is experiencing limited hydrothermal activity at the present time and likely had similar low levels of degassing just prior to the last eruption. The average eruptive recurrence interval for the P1-P17 deposits, based on 226Ra-230Th maximum eruptive ages from P1 and P8 and 14C ages from P17, is ~220 years. This recurrence interval is similar to the ~200 y eruptive recurrence interval at Furnas volcano and much shorter than the ~1200 y eruptive interval at Fogo volcano. This has important implications with respect to volcanic hazards and should be considered in any future volcanic hazard planning.

U-series disequilibria, Carbon-14, Cornu aspersum,↗

Identifying geological structures through microseismic cluster and burst analyses complementing active seismic interpretation

At the Decatur carbon capture and storage site (IL, USA) CO 2 has been injected from 2011–2014 and from 2017 to present near the base of the Lower Mt. Simon Sandstone saline reservoir, resulting in microseismicity. Microseismicity is mainly located in the basement and distributed in distinct spatial clusters. The lack of significant impedance contrasts within the basement makes the interpretation of active-source seismic reflection data challenging, however, recent reprocessing allowed to resolve faults above and at the top of the basement. These faults generally do not coincide with the location of microseismic events and their continuation to the general depth of the seismic events cannot be assumed. This paper shows how the interpretation of the microseismicity can complement structural interpretations of active-source seismic reflection data. In particular, we analyze clusters and bursts (abrupt increases) of microseismicity, identify unresolved, smaller-scale weaknesses and extract statistical parameters. These parameters allow comparisons with the interpreted faults, and with fracture sets intercepted by boreholes. During injection at the Decatur site, the injection pressure was kept far below fracture pressure, nevertheless, seismic events were induced and spread far beyond the expected extent of the CO 2 plume. We argue that local stress transfers related to the CO 2 injection reactivated pre-existing fractures within the critically stressed basement. Finally, we conducted a slip tendency analysis for faults interpreted from active seismic, selected cluster, bursts and nodal planes from focal mechanisms to determine if the interpreted structures are optimally oriented with respect to the stress regime. Our results suggest that the orientation of fractures close to the injection well, generally shows slight deviations from the optimal orientation for slip. This might indicate either slight local deviations of the maximum horizontal stress azimuth from the average direction used in the analysis, or the lack of optimally oriented fractures at this location.

58 GEOSCIENCES↗

Regularization via f -Divergence: An Application to Multi-Oxide Spectroscopic Analysis

In this paper, we explore the application of convolutional neural networks (CNNs) for predicting the chemical composition of complex geologic samples in a simulated Martian atmospheric environment. Specifically, we aim to characterize oxide weight percentages (wt.%) of rock samples analyzed by remote Laser-Induced Breakdown Spectroscopy (LIBS), framing the problem as a multi-target regression task . Neural networks trained on LIBS spectra are prone to overfitting due to high spectral complexity, limited labeled data, and measurement noise. While regularization is critical for improving generalization, common methods (e.g., ℓ 2 regularization) impose constraints not directly tied to data distribution properties. We propose a novel regularization method based on a specific ƒ-divergence induced by a graph-based estimator, designed to constrain the distributional discrepancy between predictions and targets. This regularizer serves a dual purpose: (a) mitigating overfitting by enforcing a constraint on the distributional difference between predictions and noisy targets, and (b) acting as an auxiliary loss that penalizes large divergences. To enable backpropagation, we develop a differentiable approximation of this particular ƒ-divergence, making the method feasible for neural networks. Experiments on ChemCam and SuperCam LIBS calibration spectra show that mathematical equation-divergence regularization outperforms or matches standard regularization methods (ℓ 1 , ℓ 2 , dropout) and the classical baseline, partial least squares (PLS). Combining ƒ-divergence regularization with standard regularization yields further performance gains, indicating that distributional regularization is useful in this context giving a promising direction for robust model training in planetary science applications. Source code is publicly available at Klein and Li (2025), https://doi.org/10.11578/dc.20250530.7.

58 GEOSCIENCES↗

Direct Air Capture-Based Carbon Dioxide Removal with United States Low-Carbon Energy and Sinks

The overall objective of this project was to complete an initial design of a commercial-scale, Carbon Capture and Storage system for Direct Air Capture (CCS-DAC) that separates and stores a minimum of 100,000 tonnes/year (t/yr.) net CO 2 from air. Three geographically diverse host sites will be used to determine the impact of different climates on the design and cost of the CCS-DAC systems; California (dry-hot), Louisiana (humid-hot), and Wyoming (mid-continental). In addition, the impact of using different low-carbon energy sources was also examined. The focus of this project was to geologically store the CO 2 , rather than the utilization of CO 2 . This Final Scientific/Technical Report is a collection of the deliverables for the project. The project team was able to successfully complete all the necessary tasks needed to determine the feasibility of the designs and operational needs of the DAC systems for each location. The data created by this allowed the project team to conduct the required evaluations to meet the requirements of the deliverables. The following deliverables were drafted and submitted to DOE prior to the conclusion of the project: (1) Initial Engineering Design; (2) Costing Estimate; (3) Techno-Economic Analysis (TEA); (4) Life Cycle Analysis (LCA); (5) Business Case Assessment; and (6) Technology EH&S Risk Assessment.

42 ENGINEERING↗

Prospective implementation of a software application for pre-disposal L/ILW waste management activities in Romania

Romania is actively engaged to update the Medium and Long Term National Strategy for Safe Management of Radioactive Waste and to approve the Road Map for Geological Repository Development. Considering relevant documents to be further updated, about 122,000 m{sup 3} SL-LILW are to be disposed in a near surface facility that will have room, also, for quantities of VLLW. Planned date for commissioning is under revision. Taking into account that in this moment there are initiated several actions for the improvement of the technical capability for LILW treatment and conditioning, several steps for the possible use of SAFRAN software were considered. In view of specific data for Romanian radioactive waste inventory, authors are trying to highlight the expected limitations and unknown data related with the implementation of SAFRAN software for the foreseen pre-disposal waste management activities. There are challenges that have to be faced in the near future related with clear definition of the properties of each room, area and waste management activity. This work has the aim to address several LILW management issues in accordance with national and international regulatory framework for the assurance of nuclear safety. Also, authors intend to develop their institutional capability for the safety demonstration of the existent and future radioactive waste management facilities and activities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Feasibility of a Deep Direct-Use Geothermal System at the University of Illinois Urbana-Champaign

This study assesses the feasibility of using deep direct-use (DDU) geothermal energy in agricultural research facilities on the University of Illinois at Urbana-Champaign campus to exploit low-temperature sedimentary basins, such as the Illinois Basin. Subsurface components of the system include extraction and injection wells and downhole pumps. Surface equipment includes heat pumps/exchangers, and fluid transport and monitoring systems. Two geologic formations in the region exhibit a potential as sources for geothermal energy, based on pre initial temperatures and flow rates of fluids. The St. Peter and Mt. Simon Sandstones lie at depths of 634 and 1,280 m, respectively. Geocellular modeling is used to characterize the reservoirs. A St. Peter Sandstone model was made for an area south of the campus. Petrophysical and geothermal properties used are based on data from the closest wells penetrating the formations. Characterization of the Mt. Simon Sandstone is in progress and is not discussed here. Extraction and injection flows simulated with different wellbore configurations provide estimates of fluid flow out of and into the reservoir. The models are used to optimize flow rates, bottomhole pressure, and temperature of the produced fluid. Individual wellbore models simulate subsurface heat loss and gain, providing guidance on the optimal type and amount of insulation in the wellbore. Design of the surface facilities will address aspects of fluid delivery, heat exchange, capital operating costs, heat loss, and corrosion. Heat capacity and flow rates are assessed to estimate life-cycle costs and benefits, including the environmental benefits of reducing greenhouse gases and water use and increased energy efficiency. A preliminary analysis of surface configurations for the DDU system (including cascading applications) based on building heat loads is being conducted to identify multiple system designs that will maximize performance, energy efficiency, and cost recovery.

15 GEOTHERMAL ENERGY↗

Entrainment rate diurnal cycle in marine stratiform clouds estimated from geostationary satellite retrievals and a meteorological forecast model: Entrainment Rate in Stratiform Clouds

The mean diurnal cycle of cloud entrainment rate (w e ) over the northeast Pacific region is for the first time computed by combining, in a mixed-layer model framework, the hourly composited GOES-15 satellite-based cloud top height (H T ) tendency, advection, and large-scale vertical velocity (w) during May to September 2013, with horizontal winds and w taken from the European Centre for Medium-Range Weather Forecasts (ECMWF) model. The tendency term dominates the magnitude and phase of the w e diurnal cycle, with a secondary role of w, and a modest advective contribution. The peak and minimum in w e occur between 20:00–22:00 LT and 9:00–11:00 LT, respectively, in close agreement with the diurnal cycle of turbulence driven by cloud top longwave cooling. Uncertainties in H T and ECMWF fields are assessed with in situ observations and three meteorological reanalysis data sets. This study provides the basis for constructing nearly global climatologies of w e by combining a suite of well-calibrated geostationary satellites.

54 ENVIRONMENTAL SCIENCES↗

The 2025 “Hacking Limnology” Workshop Series and DSOS Virtual Summit: A Half Decade of Data‐Intensive Aquatic Science

The 5th Aquatic Ecosystem MOdeling Network—Junior (AEMON-J) “Hacking Limnology” Workshop and 6th Virtual Summit: Incorporating Data Science and Open Science in the Aquatic Sciences (DSOS) convened 21–25 July 2025. As in previous years (Fig. 1; Meyer and Zwart 2020; Meyer et al. 2021b, 2021c, 2022, 2024), the virtual workshops and summit were free of charge, the content was formatted to allow for broad engagement from a globally distributed audience, and workshop materials and recordings were made available on the AEMON-J/DSOS archive (Meyer et al. 2021a). In contrast to previous years, which primarily focused on inland aquatic ecosystems, this year's workshops and summit showcased a notable plurality of ecosystem types, with workshops spanning marine, riverine, and lacustrine environments. The weeklong event brought together researchers and practitioners interested in the nexus of data science, open science, and the aquatic sciences, hosting between 47 and 65 attendees at a single time and a higher number of registrants (n = 389), who might opt to access the material asynchronously.

Meyer, Michael F. [US Geological Survey, Portland,↗

Source Term Modeling for Evaluating the Potential Impacts to Groundwater of Fluids Escaping from a Depleted Oil Reservoir Used for Carbon Sequestration

In recent years depleted oil reservoirs have received special interest as carbon storage reservoirs because of their potential to offset costs through collaboration with enhanced oil recovery projects. Modeling is currently being conducted to evaluate potential risks to groundwater associated with leakage of fluids from depleted oil reservoirs used for storage of CO2. Modeling results reported here focused on understanding how toxic organic compounds found in oil will distribute between the various phases within a storage reservoir after introduction of CO2, understanding the migration potential of these compounds, and assessing potential groundwater impacts should leakage occur. Two model scenarios were conducted to evaluate how organic components in oil will distribute among the phases of interest (oil, CO2, and brine). The first case consisted of 50 wt.% oil and 50 wt.% water; the second case was 90 wt.% CO2 and 10 wt.% oil. Several key organic compounds were selected for special attention in this study based upon their occurrence in oil at significant concentrations, relative toxicity, or because they can serve as surrogate compounds for other more highly toxic compounds for which required input data are not available. The organic contaminants of interest (COI) selected for this study were benzene, toluene, naphthalene, phenanthrene, and anthracene. Partitioning of organic compounds between crude oil and supercritical CO2 was modeled using the Peng-Robinson equation of state over temperature and pressure conditions that represent the entire subsurface system (from those relevant to deep geologic carbon storage environments to near surface conditions). Results indicate that for a typical set of oil reservoir conditions (75°C, and 21,520 kPa) negligible amounts of the COI dissolve into the aqueous phase. When CO2 is introduced into the reservoir such that the final composition of the reservoir is 90 wt.% CO2 and 10 wt.% oil, a significant fraction of the oil dissolves into the vapor phase. As the vapor phase moves up through the stratigraphic column, pressures and temperatures decrease, resulting in significant condensation of oil components. The heaviest organic components condense early in this process (at higher pressures and temperatures), while the lighter components tend to remain in the vapor phase until much lower pressures and temperatures are reached. Based on the model assumptions, the final concentrations of COI to reach an aquifer at 1,520 kPa and 25°C were quite significant for benzene and toluene, whereas the concentrations of polynuclear aromatic hydrocarbons that reach the aquifer were very small. This work demonstrates a methodology that can provide COI source term concentrations in CO2 leaking from a reservoir and entering an overlying aquifer for use in risk assessments.

carbon sequestration, scCO2, crude oil, benzene, B↗

ED-cPSD: Fast Phase-Size Distribution via Sequential Erosion-Dilation

The Erosion-Dilation continuous Phase-Size Distribution, ED-cPSD, is an application for calculating continuous pore and particle-size distribution from digital reconstructions and/or image-based structural data. It is based on the erosion-dilation continuous phase-size distribution method. A continuous size distribution is a measure of the probability density of finding a particle or pore of a certain size. These distributions are of interest in any field of study involving porous media, including but not limited to electrochemistry, petroleum engineering, geology, and food science. The algorithm behind the software provides a computationally efficient way to calculate phase-size distributions for large domains. For a 3D battery electrode reconstruction with 1.3 x 10 8 voxels, the particle size distribution is derived in under 2 min on a desktop, while also retaining flexibility and computational efficiency for HPC-scale multi-threading. The software can handle structures with over 10 9 voxels. The algorithm is roughly 280 times faster than a previous version on the same task.

Characterization↗

Ion beam analyses of radionuclide migration in heterogeneous rocks

The migration of radionuclides (RN) in the environment is a topic of general interest, for its implications on public health, and it is an issue for the long-term safety studies of deep geological repositories (DGR) for high-level radioactive waste. The role played by colloids on RN migration is also of great concern. Diffusion and sorption are fundamental mechanisms controlling RN migration in rocks and many experimental approaches are applied to determine transport parameters for low sorbing RN in homogeneous rocks. However, it is difficult to obtain relevant data for high sorbing RN or colloids, for which diffusion lengths are extremely short, or within heterogeneous rocks, where transport might be different in different minerals. The ion beam techniques Rutherford Backscattering Spectrometry (RBS) and micro-Particle Induced X-Ray Emission ({mu}PIXE), rarely applied in the field, were selected for their micro-analytical potential to study RN diffusion and surface retention within heterogeneous rocks. Main achievements obtained during last 12 years are highlighted.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Climate impact on fluvial-lake system evolution, Eocene Green River Formation, Uinta Basin, Utah, USA

In light of a modern understanding of early Eocene greenhouse climate fluctuations and new highly seasonal fluvial system faces models, the role of climate in the evolution of one classically-cited continental, terminal lake system is re-examined. Detailed stratigraphic description and elemental abundance data from fifteen cores and seven outcrop regions of the Green River Formation were used to construct a ~150 km cross section across the Uinta Basin, Utah, USA. Lake Uinta in the Uinta Basin is divided into five lake phases: (1) post-Paleocene Eocene Thermal Maximum, (2) peak Eocene hyperthermal, (3) waning hyperthermal, Early Eocene Climatic Optimum (EECO), (4) post-hyperthermal, and (5) post-EECO regimes, based primarily on climatically driven changes in fluvial style in combination with sedimentary indicators of lacustrine carbonate deposition, organic matter preservation, salinity, and lake depth. Basinwide siliciclastic dominated intervals were deposited by highly seasonal fluvial systems and record negative organic carbon isotope excursions associated with early Eocene abrupt, transient global warming (hyperthermal) events. Carbonate dominated or organic rich intervals record stable, less seasonal climate periods between hyperthermals, with lower siliciclastic sediment supply allowing the development of carbonate and organic matter preservation. The stratigraphic progression from alternating organic rich and lean zones to the overlying organic rich Mahogany and R8 zones represents the global transition out of the pulsed early Eocene hyperthermal climate regime to a time of sediment starvation and lake stratification, sequestering sedimentary organic carbon. This study provides a novel approach to terrestrial paleoclimate reconstruction that relies largely on unique sedimentary indicators and secondarily on isotopic proxy records within the context of a large basin-wide sedimentologic and stratigraphic data set, thus setting the stage for future detailed geochemical terrestrial paleoclimate proxy development.

Geology↗

Validation of Fault Displacements from Dynamic Rupture Simulations against the Observations from the 1992 Landers Earthquake

ABSTRACT Coseismic fault displacements in large earthquakes have caused significant damage to structures and lifelines on and near fault lines. Coseismic displacements represent a real threat, especially to distributed infrastructure systems. For infrastructure systems that can not avoid active faults, engineering displacement demands are defined using probabilistic fault-displacement hazard analyses (PFDHA). However, PFDHA models are sparse and poorly constrained partly due to the scarcity of detailed fault-displacement observations. Advancements in dynamic rupture simulation methods make them an attractive approach to address this important issue. Because fault displacements can be simulated for various geologic conditions as constrained by current knowledge about earthquake processes, they can be used to supplement the observation datasets. In addition to providing on-fault displacements, when used with appropriate constitutive models for the bulk medium, they can capture off-fault distributed inelastic deformations as well. For viable extrapolation, simulations must first be validated against data. In this article, we summarize the calibration and validation of the dynamic rupture model against the observations of the well-documented 1992 Landers earthquake. We defined a preferred model that reproduces several first-order fault-displacement metrics such as the on-fault partition of the total displacement, the mean fault-zone width, and the location of the peak displacement. Simulated ground motions consistent with the observations ensure that all physics important to modeling have been properly parameterized. For the extrapolation, we generated a suite of dynamic rupture models to quantify expected fault-displacement metrics, their intercorrelations, and magnitude dependencies, which are in part supported by the Landers and other recent earthquakes. Our validation and extrapolation exercise paves the way for using dynamic rupture modeling to quantitatively address fault-displacement hazard on a broader scale. The results are promising and are expected to be useful to inform PFDHA model development.

Geochemistry & Geophysics↗

Fresh Water Generation from Aquifer-Pressured Carbon Storage: Annual Report FY09

This project is establishing the potential for using brine pressurized by Carbon Capture and Storage (CCS) operations in saline formations as the feedstock for desalination and water treatment technologies including reverse osmosis (RO) and nanofiltration (NF). The aquifer pressure resulting from the energy required to inject the carbon dioxide provides all or part of the inlet pressure for the desalination system. Residual brine is reinjected into the formation at net volume reduction, such that the volume of fresh water extracted balances the volume of CO{sub 2} injected into the formation. This process provides additional CO{sub 2} storage capacity in the aquifer, reduces operational risks (cap-rock fracturing, contamination of neighboring fresh water aquifers, and seismicity) by relieving overpressure in the formation, and provides a source of low-cost fresh water to offset costs or operational water needs. This multi-faceted project combines elements of geochemistry, reservoir engineering, and water treatment engineering. The range of saline formation waters is being identified and analyzed. Computer modeling and laboratory-scale experimentation are being used to examine mineral scaling and osmotic pressure limitations. Computer modeling is being used to evaluate processes in the storage aquifer, including the evolution of the pressure field. Water treatment costs are being evaluated by comparing the necessary process facilities to those in common use for seawater RO. There are presently limited brine composition data available for actual CCS sites by the site operators including in the U.S. the seven regional Carbon Sequestration Partnerships (CSPs). To work around this, we are building a 'catalog' of compositions representative of 'produced' waters (waters produced in the course of seeking or producing oil and gas), to which we are adding data from actual CCS sites as they become available. Produced waters comprise the most common examples of saline formation waters. Therefore, they are expected to be representative of saline formation waters at actual and potential future CCS sites. We are using a produced waters database (Breit, 2002) covering most of the United States compiled by the U.S. Geological Survey (USGS). In one instance to date, we have used this database to find a composition corresponding to the brine expected at an actual CCS site (Big Sky CSP, Nugget Formation, Sublette County, Wyoming). We have located other produced waters databases, which are usually of regional scope (e.g., NETL, 2005, Rocky Mountains basins).

20 FOSSIL-FUELED POWER PLANTS↗

The Cigeo Pilot Phase - 19024

Within the incremental development of the Cigeo deep geological repository, the Pilot Phase (PP) concept emerged during the 2013 public debate on Cigeo. The PP is a period of time that covers the beginning of the project, after its construction license is granted. It mainly aims at acquiring and / or confirming in situ, in a representative environment and in the operating conditions of Cigeo, the data selected for the design and safety demonstration. In parallel, it will emphasize the gradual and cautious approach for starting a complex industrial installation such as Cigeo. The Pilot Phase which is scheduled for a total duration of at least a decade will include 'inactive' tests (without radioactive waste) and then radioactive waste package disposal operations. The PP should be considered as a phase during which additional knowledge will be obtained and demonstration that cannot be fully acquired within the Underground Research Laboratory will be completed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Assessment of Carbonated Brine Injection as Low-risk Strategy for Geologic Carbon Storage

The main objective of this early-phase research was to evaluate the techno-economic feasibility and risk associated with combined brine and CO 2 storage in SWD wells using brine dissolution in the North Dakota portion of the Williston Basin. Three simulation studies were conducted to investigate: (1) CO 2 phases at different conditions, (2) wellbore compatibility, and (3) long-term storage fate in reservoir. (1) A simple reservoir model and injection simulations were created using data to represent the BEST (brine extraction and storage test) site, an operational SWD facility located near Watford City, North Dakota. The pressure evolution caused by CO 2 comingled in produced water injectate in a layer cake reservoir was then modeled while tracking aqueous CO 2 throughout the project. The salinity of the injection water, the salinity of the reservoir brine, and the amount of dissolved CO 2 comingled in the injection water were varied. (2) A wellbore corrosion model was performed using the CO 2 concentrations selected based on the reservoir modeling to examine the carbonated produced water impact on wellbore. (3) Reactive transport modeling was conducted with the optimal CO 2 concentration for this injection site to study the rock-fluid interactions and CO 2 fate in the reservoir. Results suggest that CO 2 dissolved in produced water can be injected without appreciably increasing subsurface pressure or leakage risks. Pressure buildup was found to vary with salinity but not with CO 2 mass fraction. Simulation results show that lower CO 2 percent mass fraction leads to a higher amount of CO 2 that can be dissolved at a higher injection salinity. Furthermore, the long-term goal of dissolution trapping in a traditional carbon storage project is accomplished from the start, mitigating risks associated with potential migration of buoyant CO 2 , so long as the reservoir pressure and temperature are used to determine the maximum mass fraction of the dissolved CO 2 .

54 ENVIRONMENTAL SCIENCES↗