Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEADING ABSTRACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Theoretical Studies of the HO/HO2 Catalytic Cycle for Ozone Destruction

Recently it has been determined that the HO/HO2 catalytic cycle accounts for nearly one-half of the total ozone depletion in the lower stratosphere. The catalytic cycle is: (1) HO + O3 yields HO2 + O2; (2) HO2 + O3 yields HO + O2 + O2. The net reaction is 2O3 yields 3O2. The rate limiting step in this process is the reaction of HO2 with ozone. There is a problem extending the experimental measurement of the rate of this reaction over the range 233-400 K down to stratospheric temperatures of 210-220 K. Therefore we have undertaken a project to determine the temperature dependence of the rate constant for this reaction in the low temperature region. The first step in this project, which is described in this poster, is the determination of the relevant potential energy surfaces. The calculations use CASSCF/derivative methods to define the pathways followed by CASSCF/ACPF to determine the energetics. The HO + O3 reaction is found to proceed through an HO4 complex, which is unstable with respect to HO2 + O2. The HO2 +O3 reaction is more complex. One pathway, which has been characterized, is the formation of an HO5 complex which decomposes to HO3 + O2 and subsequently to HO + O2 + O2. Another pathway, which is believed to also play a role, is hydrogen abstraction to give O2 + HO3 and subsequent decomposition of HO3 to HO + O2. Isotopic labeling experiments indicate that the later pathway is dominant. However, so far attempts to locate the saddle point for this pathway have not been successful. We have also characterized the potential energy surfaces for a number of species involved in these reactions, including HO3 and triplet O4. The triplet O4 species is probably involved in the reaction of vibrationally excited O2 with ground state O2 leading to O3 + O. The latter reaction is believed to be important as an additional source of stratospheric ozone.

Walch, Stephen P.↗
DOE OSTI2019

Orbitals and the Interpretation of Photoelectron Spectroscopy and (e,2e) Ionization Experiments

Abstract Electron momentum spectroscopy, scanning tunneling microscopy, and photoelectron spectroscopy provide unique information about electronic structure, but their interpretation has been controversial. This essay discusses a framework for interpretation. Although this interpretation is not new, we believe it is important to present this framework in light of recent publications. The key point is that these experiments provide information about how the electron distribution changes upon ionization, not how electrons behave in the pre‐ionized state. Therefore, these experiments do not lead to a “selection of the correct orbitals” in chemistry and do not overturn the well‐known conclusion that both delocalized molecular orbitals and localized molecular orbitals are useful for interpreting chemical structure and dynamics. The two types of orbitals can produce identical total molecular electron densities and therefore molecular properties. Different types of orbitals are useful for different purposes.

Truhlar, Donald G.↗
DOE OSTI2019

Orbitals and the Interpretation of Photoelectron Spectroscopy and (e,2e) Ionization Experiments

Abstract Electron momentum spectroscopy, scanning tunneling microscopy, and photoelectron spectroscopy provide unique information about electronic structure, but their interpretation has been controversial. This essay discusses a framework for interpretation. Although this interpretation is not new, we believe it is important to present this framework in light of recent publications. The key point is that these experiments provide information about how the electron distribution changes upon ionization, not how electrons behave in the pre‐ionized state. Therefore, these experiments do not lead to a “selection of the correct orbitals” in chemistry and do not overturn the well‐known conclusion that both delocalized molecular orbitals and localized molecular orbitals are useful for interpreting chemical structure and dynamics. The two types of orbitals can produce identical total molecular electron densities and therefore molecular properties. Different types of orbitals are useful for different purposes.

Truhlar, Donald G.↗
DOE OSTI2024

An Ab initio based OH initiated oxidation kinetics of glycerol carbonate: A promising biofuel component

The global energy demand is steadily increasing because of the population explosion and economic growth. Fossil fuels supply around 85 % of global primary energy demand. On one hand, fulfilling the increasing energy demands is a big challenge for the next few decades. On the other hand, the continued burning of fossil fuels leads to higher CO2 emissions, severely impacting global warming. Therefore, the policymakers vow to shift from conventional fuels to renewable resources for economic, environmental, and future energy security reasons. In this context, biofuels from lignocellulosic biomass and/or carbon-neutral fuels produced in the sustainable carbon cycle can close the carbon cycle and reach net zero-carbon emission. Recently, glycerol carbonate has been proposed as a promising fuel or fuel additive for future sustainability. Therefore, we investigated the hydrogen abstraction reactions of glycerol carbonate (GC) by OH radicals using high-level ab initio and variational transition state theory calculations. We mapped out the potential energy surface using the CCSD(T)/cc-pV(D, T)Z//MP2/cc-pVTZ level of theory. Here we used the ab initio parameters to obtain the site-specific rate coefficients by employing the variational transition state theory. We observed that every hydrogen atom in GC displays a unique reactivity with OH radicals. We derived branching ratio of each channel that are difficult to access experimentally. The overall rate coefficients exhibit a strong non-Arrhenius behaviour, which can be represented as: $k^{CVT/SCT}_{ov}$ (T) = 3.39 x 10 -20 x T 2.659 x e$\frac{-750.0 Jmol^{-1}}{RT}$ $\frac{cm^{3}}{molecule s}$ This is the first reported rate data for the glycerol carbonate and OH radicals reaction.

09 BIOMASS FUELS↗
DOE OSTI2023

The Effect of Indian Ocean Temperature on the Pacific Trade Winds and ENSO

Abstract A notable shift in the El Niño‐Southern Oscillation (ENSO) has been observed in the early 21st century, characterized by an increased prevalence of Central Pacific (CP) events and strengthened Pacific trade winds. This shift may be attributed to the warming tropical Indian Ocean (TIO). To investigate this, we conduct perturbation experiments using the Insitut Pierre Simon Laplace climate model and nudge TIO surface temperatures to induce warming or cooling effects. Our findings reveal that TIO warming (or cooling) leads to amplified (weakened) mean trade winds and surface warming (cooling) in the Pacific region. Surprisingly, ENSO variability increases in both TIO cooling and warming scenarios. This result is linked to stronger positive feedbacks and a less stable Bjerknes index for either TIO forcing. Additionally, we find that TIO warming leads to more frequent CP events, meridional widening of wind anomalies, and broadening of the ENSO power spectrum toward lower frequencies.

Geology↗
DOE OSTI2023

Autonomous and dynamic precursor selection for solid-state materials synthesis

Abstract Solid-state synthesis plays an important role in the development of new materials and technologies. While in situ characterization and ab-initio computations have advanced our understanding of materials synthesis, experiments targeting new compounds often still require many different precursors and conditions to be tested. Here we introduce an algorithm (ARROWS 3 ) designed to automate the selection of optimal precursors for solid-state materials synthesis. This algorithm actively learns from experimental outcomes to determine which precursors lead to unfavorable reactions that form highly stable intermediates, preventing the target material’s formation. Based on this information, ARROWS 3 proposes new experiments using precursors it predicts to avoid such intermediates, thereby retaining a larger thermodynamic driving force to form the target. We validate this approach on three experimental datasets, containing results from over 200 synthesis procedures. In comparison to black-box optimization, ARROWS 3 identifies effective precursor sets for each target while requiring substantially fewer experimental iterations. These findings highlight the importance of domain knowledge in optimization algorithms for materials synthesis, which are critical for the development of fully autonomous research platforms.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A chemo-mechanical model for describing sorption hysteresis in a glassy polyurethane

Abstract Hysteretic sorption and desorption of water is observed from 0 to 95% relative humidity and 298–333 K on a glassy polyurethane foam. It is postulated that sorption-induced swelling of the glassy polyurethane increases the concentration of accessible hydrogen-bonding adsorption sites for water. The accessibility of sites is kinetically controlled due to the restricted thermal motions of chains in the glassy polymer, causing a difference in accessible site concentrations during sorption and desorption. This discrepancy leads to hysteresis in the sorbed concentrations of water. A coupled chemo-mechanical model relating volumetric strain, adsorption site concentration, and sorbed water concentration is employed to describe water sorption hysteresis in the glassy polyurethane. This model not only describes the final mass uptake for each relative humidity step, but also captures the dynamics of water uptake, which exhibit diffusion and relaxation rate-controlled regimes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Rotation in attosecond vibronic coherence spectroscopy for molecules

Abstract Excitation or ionization of a molecule by ultrafast laser pulses can create a superposition of electronic states, whose dynamics is influenced by the interplay of electronic coherence and nuclear motion, resulting in charge migration and possibly charge transfer. Probing the vibronic coherence is therefore vital to monitoring electronic dynamics and controlling chemical reactivity, as recently demonstrated in molecules via attosecond transient absorption spectroscopy (ATAS). However, theories supporting the interpretation of ATAS experiments neglect the effects of molecular rotation, often leading to inaccurate interpretation of experimental data. Here, we develop a comprehensive theory for ATAS of molecules encompassing the entire pump-probe process. Applying the theory to N 2 , we demonstrate that the emergence of coherent signals critically depends on the consideration of molecular rotation. This work contributes to close the gap between theory and ATAS experiments, paving the way for monitoring electronic motion and controlling chemical reactivity in diverse molecular systems.

Physics↗
DOE OSTI2023

Melting, reentrant ordering and peak effect for Wigner crystals with quenched and thermal disorder

Abstract We consider simulations of Wigner crystals in solid state systems interacting with random quenched disorder in the presence of thermal fluctuations. When quenched disorder is absent, there is a well defined melting temperature determined by the proliferation of topological defects, while for zero temperature, there is a critical quenched disorder strength above which topological defects proliferate. When both thermal and quenched disorder are present, these effects compete, and the thermal fluctuations can reduce the effectiveness of the quenched disorder, leading to a reentrant ordered phase in agreement with the predictions of Nelson (1983 Phys. Rev. B 27 2902–14). There are two competing theories for the low temperature behavior, and our simulations show that both capture aspects of the actual response. The critical disorder strength separating ordered from disordered states remains finite as the temperature goes to zero, as predicted by Cha and Fertig (1995 Phys. Rev. Lett. 74 4867–70), instead of dropping to zero as predicted by Nelson. At the same time, the critical disorder strength decreases with decreasing temperature, as predicted by Nelson, instead of remaining constant, as predicted by Cha and Fertig. The onset of the reentrant phase can be deduced based on changes in the transport response, where the reentrant ordering appears as an increase in the mobility or the occurrence of a depinning transition. We also find that when the system is in the ordered state and thermally melts, there is an increase in the effective damping or pinning. This produces a drop in the electron mobility that is similar to the peak effect phenomenon found in superconducting vortices, where thermal effects soften the lattice or break down its elasticity, allowing the particles to better adjust their positions to take full advantage of the quenched disorder.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Recipient-Biased Competition for an Intracellularly Generated Cross-Fed Nutrient Is Required for Coexistence of Microbial Mutualists

ABSTRACT Many mutualistic microbial relationships are based on nutrient cross-feeding. Traditionally, cross-feeding is viewed as being unidirectional, from the producer to the recipient. This is likely true when a producer’s waste, such as a fermentation product, has value only for a recipient. However, in some cases the cross-fed nutrient holds value for both the producer and the recipient. In such cases, there is potential for nutrient reacquisition by producer cells in a population, leading to competition against recipients. Here, we investigated the consequences of interpartner competition for cross-fed nutrients on mutualism dynamics by using an anaerobic coculture pairing fermentative Escherichia coli and phototrophic Rhodopseudomonas palustris . In this coculture, E. coli excretes waste organic acids that provide a carbon source for R. palustris . In return, R. palustris cross-feeds E. coli ammonium (NH 4 + ), a compound that both species value. To explore the potential for interpartner competition, we first used a kinetic model to simulate cocultures with varied affinities for NH 4 + in each species. The model predicted that interpartner competition for NH 4 + could profoundly impact population dynamics. We then experimentally tested the predictions by culturing mutants lacking NH 4 + transporters in both NH 4 + competition assays and mutualistic cocultures. Both theoretical and experimental results indicated that the recipient must have a competitive advantage in acquiring cross-fed NH 4 + to sustain the mutualism. This recipient-biased competitive advantage is predicted to be crucial, particularly when the communally valuable nutrient is generated intracellularly. Thus, the very metabolites that form the basis for mutualistic cross-feeding can also be subject to competition between mutualistic partners. IMPORTANCE Mutualistic relationships, particularly those based on nutrient cross-feeding, promote stability of diverse ecosystems and drive global biogeochemical cycles. Cross-fed nutrients within these systems can be either waste products valued by only one partner or nutrients valued by both partners. Here, we explored how interpartner competition for a communally valuable cross-fed nutrient impacts mutualism dynamics. We discovered that mutualism stability necessitates that the recipient have a competitive advantage against the producer in obtaining the cross-fed nutrient, provided that the nutrient is generated intracellularly. We propose that the requirement for recipient-biased competition is a general rule for mutualistic coexistence based on the transfer of intracellularly generated, communally valuable resources.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Deuterium scattering experiments in CTEQ global QCD analyses: a comparative investigation

Abstract Experimental measurements in deep-inelastic scattering and lepton-pair production on deuterium targets play an important role in the flavor separation of u and d (anti)quarks in global QCD analyses of the parton distribution functions (PDFs) of the nucleon. We investigate the impact of theoretical corrections accounting for the light-nuclear structure of the deuteron upon the fitted u , d -quark, gluon, and other PDFs in the CJ15 and CT18 families of next-to-leading order CTEQ global analyses. The investigation is done using the $$L_2$$ L 2 sensitivity statistical method, which provides a common metric to quantify the strength of experimental constraints on various PDFs and ratios of PDFs in the two distinct fitting frameworks. Using the $$L_2$$ L 2 sensitivity and other approaches, we examine the compatibility of deuteron data sets with other fitted experiments under varied implementations of the deuteron corrections. We find that freely-fitted deuteron corrections modify the PDF uncertainty at large momentum fractions and will be relevant for future PDFs affecting electroweak precision measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Direct and Inverse Photoelectron Spectroscopy Evidence for a Revised Picture of Electronic States of Negative Polarons in n‐Doped C 60

Abstract Determining the electronic levels associated with polarons, the fundamental charge carriers in organic semiconductors, is key to understanding the charge transport properties of these materials. Recent findings challenge the traditional view of these electronic levels by highlighting the importance of intra‐molecular Coulomb interactions in polarons. Experimental evidence was previously presented for a revised model of the negative polaron in the case of the polymer semiconductor poly(NDI2OD‐T 2 ); there, the addition of an excess electron was seen to lead to the emergence of a singly occupied state within the energy gap of the undoped material and an unoccupied state above the edge of the conduction states . Here, focus is on a small‐molecule semiconductor, C 60 , and spectral evidence is provided of a similar picture for the new states appearing upon polaron formation. Specifically, direct and inverse photoemission spectroscopy is used to investigate the density of states in C 60 films n‐doped with two dimeric dopants. The Coulomb interaction energy (Hubbard U ) of the C 60 anion is experimentally determined to be ≈1.1 eV, a value that aligns closely with theoretical predictions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Order–Disorder Phase Stabilization by Pressure‐Induced Charge Transfer Enhances the Ferroelectric Photovoltaic Effect in Multiferroic BaFe 4 O 7

Abstract Multiferroic ferroelectric photovoltaic (FPV) materials, combining magnetic and ferroelectric properties, are of paramount importance for optoelectronic and photovoltaic applications. However, optimizing both the remanent polarization and the optical bandgap—key factors for enhanced FPV performance—presents a significant challenge due to their trade‐off. This work shows that pressure‐induced charge transfer between different metal sites can break this trade‐off. Above ≈20 GPa, charge transfer between different trivalent iron (Fe) sites in the multiferroic material BaFe 4 O 7 leads to Fe valence disproportionation, FeO 4 tetrahedra disorder, and Jahn–Teller distortion of FeO 6 octahedra. These changes reduce the bandgap, lower resistivity, and enhance ferroelectric polarization, resulting in a 2.5‐fold increase in photocurrent. Upon decompression, BaFe 4 O 7 retains an order–disorder structure, optimal ferroelectric and optical properties at ambient conditions. This work provides a novel pathway to simultaneously optimizing ferroelectricity and bandgap via pressure‐induced charge transfer, overcoming the traditional trade‐off in FPV materials, and offers a promising approach for developing high polarization performance, narrow‐bandgap FPV materials.

Chemistry↗
DOE OSTI2023

Annealing in Argon Universally Upgrades the Na‐Storage Performance of Mn‐Based Layered Oxide Cathodes by Creating Bulk Oxygen Vacancies

Abstract Manganese‐rich layered oxide cathodes of sodium‐ion batteries (SIBs) are extremely promising for large‐scale energy storage owing to their high capacities and cost effectiveness, while the Jahn–Teller (J–T) distortion and low operating potential of Mn redox largely hinder their practical applications. Herein, we reveal that annealing in argon rather than conventional air is a universal strategy to comprehensively upgrade the Na‐storage performance of Mn‐based oxide cathodes. Bulk oxygen vacancies are introduced via this method, leading to reduced Mn valence, lowered Mn 3 d‐ orbital energy level, and formation of the new‐concept Mn domains. As a result, the energy density of the model P2‐Na 0.75 Mg 0.25 Mn 0.75 O 2 cathode increases by ≈50 % benefiting from the improved specific capacity and operating potential of Mn redox. The Mn domains can disrupt the cooperative J–T distortion, greatly promoting the cycling stability. This exciting finding opens a new avenue towards high‐performance Mn‐based oxide cathodes for SIBs.

Chemistry↗
DOE OSTI2016

Thermodynamic Stability of Transition‐Metal‐Substituted LiMn 2− x M x O 4 (M=Cr, Fe, Co, and Ni) Spinels

Abstract The formation enthalpies from binary oxides of LiMn 2 O 4 , LiMn 2− x Cr x O 4 ( x= 0.25, 0.5, 0.75 and 1), LiMn 2− x Fe x O 4 ( x= 0.25 and 0.5), LiMn 2− x Co x O 4 ( x= 0.25, 0.5, and 0.75) and LiMn 1.75 Ni 0.25 O 4 at 25 °C were measured by high temperature oxide melt solution calorimetry and were found to be strongly exothermic. Increasing the Cr, Co, and Ni content leads to more thermodynamically stable spinels, but increasing the Fe content does not significantly affect the stability. The formation enthalpies from oxides of the fully substituted spinels, LiMnMO 4 (M=Cr, Fe and Co), become more exothermic (implying increasing stability) with decreasing ionic radius of the metal and lattice parameters of the spinel. The trend in enthalpy versus metal content is roughly linear, suggesting a close‐to‐zero heat of mixing in LiMn 2 O 4 —LiMnMO 4 solid solutions. These data confirm that transition‐metal doping is beneficial for stabilizing these potential cathode materials for lithium‐ion batteries.

Lai, Chenying↗
DOE OSTI2023

Predicting encapsulant delamination in photovoltaic modules bridging photochemical reaction kinetics and fracture mechanics

Abstract Photovoltaic (PV) modules are subjected to environmental stressors (UV exposure, temperature, and humidity) that cause degradation within the encapsulant and its interfaces with adjacent glass and cell substrates. To save experimental time and to enable long‐term assessment with intensive degradation only taking place after many years, the development of predictive models is indispensable. Previous works have modeled the delamination of the ethylene vinyl acetate (EVA) encapsulant/glass and encapsulant/cell interfaces under field aging conditions with fundamental photochemical degradation reactions that lead to molecular scission and loss of interfacial adhesion, characterized by the fracture resistance, G c . However, these models were fundamentally limited in that the following aspects were not incorporated: (i) molecular crosslinking in the field, (ii) synergistic autocatalytic interactions of degradation mechanisms, (iii) connection between degraded encapsulant structure and its mechanical properties, and (iv) rigorous treatment of the plasticity contribution to G c with finite element models. Here, we present a time‐dependent multiscale model that addresses these limitations and is applicable to a wide range of encapsulants and interfaces. For the reference EVA encapsulant and its interfaces with the glass and cell, the presented model predicts an initial rise in G c in the first 3 years of field aging from crosslinking, then a subsequent sharp decline from degradation mechanisms. We used nanoindentation to measure the changes in EVA mechanical properties over exposure time to tune the model parameters. The model predictions of G c and mechanical properties match with experimental data and show an improvement compared to previous models. The model can even predict switches in failure interfaces, such as the observed EVA/cell to EVA/glass transition. We also conducted a sensitivity analysis study by varying the degradation and crosslinking kinetic parameters to demonstrate their effects on G c . Model extensions to polyolefin elastomer‐ and silicone‐encapsulants and their interfaces are also demonstrated.

Liu, Kuan↗