Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Approaching Solar Maximum 24 with Stereo-Multipoint Observations of Solar Energetic Particle Events

Since the beginning of the Solar Terrestrial Relations Observatory (STEREO) mission at the end of 2006, the two spacecraft have now separated by more than 130◦ degrees from the Earth. A 360-degree view of the Sun has been possible since February 2011, providing multipoint in situ and remote sensing observations of unprecedented quality. Combining STEREO observations with near-Earth measurements allows the study of solar energetic particle (SEP) events over a wide longitudinal range with minimal radial gradient effects. This contribution provides an overview of recent results obtained by the STEREO/IMPACT team in combination with observations by the ACE and SOHO spacecraft. We focus especially on multi-spacecraft investigations of SEP events. The large longitudinal spread of electron and 3He-rich events as well as unusual anisotropies will be presented and discussed.

observations↗

Rigid Supramolecular Aramid Nanotubes as Catalyst Supports

Solution‐phase heterogeneous catalysts benefit from nanoscale dimensions, which maximize specific surface area and enhance catalytic activity. However, the ease of recovering such nanocatalysts depends on the design of the support materials, which are often particle‐like. Rigid 1D nanomaterials are proposed as supports that can enhance separability while offering high volumetric specific surface area for greater catalyst loading and activity. Here, aramid amphiphiles (AAs) are designed to spontaneously self‐assemble in water into high‐aspect‐ratio supramolecular nanotubes with tunable surface chemistry. These AA nanotubes exhibit high persistence lengths (P = 750 ± 340 µm) and mechanical stiffnesses (3 N/m). Incorporating surface thiol groups enables immobilization of catalytic gold nanoparticles. The resulting AA nanotube‐gold nanoparticle complexes exhibit high catalytic activity, efficient recoverability via simple microfiltration, and sustained reusability over ten reaction cycles. This study demonstrates the utility of molecular self‐assembled 1D nanomaterials as versatile scaffolds for the reuse and recovery of nanoscale catalysts.

1D nanomaterials↗

Surface modification of ZIF ‐90 with triptycene for enhanced interfacial interaction in mixed‐matrix membranes for gas separation

Abstract Zeolite imidazole framework (ZIF‐90) nanoparticles were chemically modified by grafting triptycene moieties. The modified nanoparticles were introduced into a triptycene‐based polyimide as fillers to generate mixed matrix membranes (MMMs) for gas separation. The incorporation of “hook‐like” triptycene moieties in both dispersed and continuous phases led to intimate contact between the two phases and thus defect‐free interfacial morphology, due to the supramolecular interlocking and π–π stacking interaction between triptycene units presented in both phases. The filler/polymer solution showed shear thickening behavior due to such strong interfacial interaction. The separation performance of the prepared composite membranes was investigated as a function of filler loading and particle surface grafting density. Pure‐gas permeation results showed that the gas permeabilities increased expectedly as the filler loading increased, with stable or improved selectivities. The reduced permeability relative to pristine polyimide film is likely due to the pore blockage of ZIF‐90 upon grafting triptycene moieties on the particle surface. Reducing the grafting density of triptycene moieties led to improved permeability and selectivity suggesting good tunability of this series of new composite membranes. Overall, modification of nanofiller with hierarchical triptycene moieties offers a fundamentally new avenue for creation of composite membranes with unique properties in gas separations.

Zhang, Qinnan↗

Three-dimensional scanning transmission electron microscopy of biological specimens

A three-dimensional (3D) reconstruction of the cytoskeleton and a clathrin-coated pit in mammalian cells has been achieved from a focal-series of images recorded in an aberration-corrected scanning transmission electron microscope (STEM). The specimen was a metallic replica of the biological structure comprising Pt nanoparticles 2 - 3 nm in diameter, with a high stability under electron beam radiation. The 3D dataset was processed by an automated deconvolution procedure. The lateral resolution was 1.1 nm, set by pixel size. Particles differing by only 10 nm in vertical position were identified as separate objects with greater than 20% dip in contrast between them. We refer to this value as the axial resolution of the deconvolution or reconstruction, the ability to recognize two objects, which were unresolved in the original data set. The precision of the height determination was 0.2 nm. The resolution of the reconstruction is comparable to that achieved by tilt-series transmission electron microscopy (TEM). However, the focal-series method does not require mechanical tilting and is therefore much faster. 3D STEM images were also recorded of the Golgi ribbon in conventional thin sections containing 3T3 cells with a comparable axial resolution in the deconvolved data set.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Malic Acid Carbon Dots: From Super-resolution Live-Cell Imaging to Highly Efficient Separation

As-synthesized malic acid carbon dots are found to possess photoblinking properties that are outstanding and superior compared to those of conventional dyes. Considering their excellent biocompatibility, malic acid carbon dots are suitable for super-resolution fluorescence localization microscopy under a variety of conditions, as we demonstrate in fixed and live trout gill epithelial cells. In addition, during imaging experiments, the so-called "excitation wavelength-dependent" emission was not observed for individual as-made malic acid carbon dots, which motivated us to develop a time-saving and high throughput separation technique to isolate malic acid carbon dots into fractions of different particle size distributions using C-18 reversed-phase silica gel column chromatography. This post-treatment allowed us to determine how particle size distribution influences the optical properties of malic acid carbon dot fractions, that is, optical band gap energies and photoluminescence behaviors.

photoblinking, super-resolution localization micro↗

Precipitation of heterogeneous nanostructures: Metal nanoparticles and dielectric nanocrystallites

Heterogeneous precipitation of nanocrystallites of metallic Bi and anatase was observed in CaO-Bi{sub 2}O{sub 3}-B{sub 2}O{sub 3}-Al{sub 2}O{sub 3}-TiO{sub 2} glass-ceramics. Addition of AlN reduced the Bi{sub 2}O{sub 3} to Bi metal nanoparticles, which were uniformly dispersed in the glass. After heat-treatment of the Bi-precipitated glass around the glass transition temperature, nanocrystalline anatase precipitated out without aggregation of the Bi metal particles. It was found that the anatase nanocrystal size was affected by the distance between a nanocrystal and a precipitated Bi nanoparticle. The glass-ceramic produced is a functional material containing a random dispersion of different types of nanoparticles with different dielectric constants.

36 MATERIALS SCIENCE↗

Structural morphology of acoustically levitated and heated nanosilica droplet

We study the vaporization and precipitation dynamics of a nanosilica encapsulated water droplet by levitating it acoustically and heating it with a CO{sub 2} laser. For all concentrations, we observe three phases: solvent evaporation, surface agglomeration, and precipitation leading to bowl or ring shaped structures. At higher concentrations, ring reorientation and rotation are seen consistently. The surface temperature from an infrared camera is seen to be dependent on the final geometrical shape of the droplet and its rotation induced by the acoustic field of the levitator. With nonuniform particle distribution, these structures can experience rupture which modifies the droplet rotational speed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of SnO{sub 2} Nanoparticles Using Ultrasonication

The use of ultrasonic energy for chemical synthesis has recently become an interesting and growing area of research. Using this form of energy, we have synthesized nanoparticles of SnO{sub 2}(8-30 nm) at room temperature by a sonication assisted precipitation technique. In order to understand the effect of ultrasonic energy on particle size and their distribution, the precipitation time was varied during the preparation. A sonication time of 3 h was found to be optimum to produce SnO{sub 2} nanoparticles having size below 10 nm. We found that a gradual increase of the sonication time gradually decreases the particle size with interesting morphology and increased surface area. The butane sensing properties of the synthesized powders exhibited a direct influence of the sonication time on the sensing properties. A 3 h sonicated sample, exhibited a maximum response of around 98.88% towards 5000 ppm butane at 450 deg. C with a fast recovery time.

36 MATERIALS SCIENCE↗

Introduction to Double Beta Decay

While the neutrino oscillation experiments have measured non-zero square mass differences between neutrino flavors, the double beta decay is the most sensitive process to the absolute mass of the neutrinos and the only that can distinguish whether neutrino is a Dirac or a Majorana particle. These are a few but not the only reasons that many efforts, both theoretically and experimentally, are dedicated to the study of this process. In this lecture I'll give a short introduction to the double beta decay process. Different decay modes and mechanisms, a short history, decay rates and extraction of the neutrino mass parameter are presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ion Beam Collimation For Improved Resolution In Associated Particle Imaging

Beam spot size on target for a Penning ion source has been measured under different source operating pressures as a function of the extraction channel length and beam energy. A beam halo/core structure was observed for ion extraction at low extraction voltages, and was greatly reduced at higher beam energy. Collimation through use of longer extraction channels results in reduced ion current on target; the resultant reduction in neutron yield for an API system driven by such an ion source can be compensated for by use of even higher beam energies.

43 PARTICLE ACCELERATORS↗

Positron Annihilation Studies in Search of Fine Precipitates in Fe-9Cr alloys

Positron annihilation lifetime studies were carried out on cold worked pure Fe and Fe-9Cr alloy subjected to isochronal annealing in the temperature range from 300 to 1323 K. The measured lifetimes of Fe-9Cr alloy showed three distinct annealing stages as compared to pure Fe viz., initial annealing of defects, a plateau between 623 K and 873 K and noticeable increase beyond 1123 K. The second annealing stage is likely due to the formation of chromium rich nanoclusters. Third annealing stage beyond 1123 K is attributed to highly defected martensitic phase formation during cooling from y-phase.

36 MATERIALS SCIENCE↗

Analysis of heterogeneous water vapor uptake by metal iodide cluster ions via differential mobility analysis-mass spectrometry

The sorption of vapor molecules onto pre-existing nanometer sized clusters is of importance in understanding particle formation and growth in gas phase environments and devising gas phase separation schemes. Here, we apply a differential mobility analyzer-mass spectrometer based approach to observe directly the sorption of vapor molecules onto iodide cluster ions of the form (MI){sub x}M{sup +} (x = 1-13, M = Na, K, Rb, or Cs) in air at 300 K and with water saturation ratios in the 0.01-0.64 range. The extent of vapor sorption is quantified in measurements by the shift in collision cross section (CCS) for each ion. We find that CCS measurements are sensitive enough to detect the transient binding of several vapor molecules to clusters, which shift CCSs by only several percent. At the same time, for the highest saturation ratios examined, we observed CCS shifts of up to 45%. For x < 4, cesium, rubidium, and potassium iodide cluster ions are found to uptake water to a similar extent, while sodium iodide clusters uptake less water. For x ≥ 4, sodium iodide cluster ions uptake proportionally more water vapor than rubidium and potassium iodide cluster ions, while cesium iodide ions exhibit less uptake. Measured CCS shifts are compared to predictions based upon a Kelvin-Thomson-Raoult (KTR) model as well as a Langmuir adsorption model. We find that the Langmuir adsorption model can be fit well to measurements. Meanwhile, KTR predictions deviate from measurements, which suggests that the earliest stages of vapor uptake by nanometer scale species are not well described by the KTR model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen assisted interconnection of silver nanoparticles with femtosecond laser radiation

Ablation of silver (Ag) nanoparticles in the direction of laser polarization is achieved by utilizing femtosecond laser irradiation in air at laser fluence ranging from ∼2 mJ/cm{sup 2} to ∼14 mJ/cm{sup 2}. This directional ablation is attributed to localized surface plasmon induced localized electric field enhancement. Scanning electron microscopy observations of the irradiated particles in different gases and at different pressures indicate that the ablation is further enhanced by oxygen in the air. This may be due to the external heating via the reactions of its dissociation product, atomic oxygen, with the surface of Ag particles, while the ablated Ag is not oxidized. Further experimental observations show that the ablated material re-deposits near the irradiated particles and results in the extension of the particles in laser polarization direction, facilitating the interconnection of two well-separated nanoparticles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Leaky ion extraction method for dielectronic recombination strength measurements at electron-beam ion traps

There are a number of mechanisms via which ions and electrons interact in a plasma, but by far one of the most important is through dielectronic recombination (DR). This is a resonant process through which an ion can capture a free electron and decrease its charge by one unit. Cross sections or strengths for this process are of vital importance in the modeling of hot plasmas and hence any advance in measurement or calculation procedures for obtaining DR data is of great importance. The work presented here examines the underlying basis of a newly developed method based on leaky mode ion extraction from an electron beam ion trap (EBIT), for relatively quickly obtaining DR strengths. The development attains to use the ratio of the leaked ions in adjacent charge states, i.e., the initial and final charge states of a DR process, to obtain the strengths preassuming that this ratio is the same as that of the ions remaining inside the EBIT trap. This work shows this assumption to be false. Hence DR strengths measured using leaked ions may be subject to error. But this work also reveals that the difference between this ratio and the one for trapped ions is insensitive to most of the experimental conditions, which means reliable DR strengths can still be obtained by leaky mode ion extraction if proper corrections are applied. An example is shown in this paper where after correction of some experimental results for DR strengths, obtained using the leaky mode, excellent agreement with corresponding theoretical calculations is obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Discriminating Uranium Isotopes Using the Time-Emission Profiles of Long-Lived Delayed Neutrons

In nuclear nonproliferation and safeguards, detecting and accurately characterizing special nuclear material remains one of the greatest challenges. Uranium enrichment determination is typically achieved by measuring the ratio of characteristic γ -ray emissions from 235 U and 238 U. Fission also produces β -delayed neutrons, which have been used in the past to determine uranium enrichment from the time dependence of the long-lived delayed-neutron emission rate. Such measurements typically use moderated 3 He-tube detectors. We demonstrate an alternative measurement technique that employs a fast neutron active-interrogation probe and a scintillation detector to measure the enrichment of uranium using both the buildup and decay of β -delayed-neutron emission. Instead of 3 He tubes, a capture-based heterogeneous composite detector consisting of scintillating Li glass and polyvinyl toluene is constructed and used, offering a prospect to scale delayed-neutron measurements to larger detector sizes. Since the technique relies on the existing tabulated nuclear data, no calibration standards are required. It is shown that the buildup of delayed-neutron emission can be used to distinguish between uranium samples and infer the uranium enrichment level, with accuracy that rivals the method that employs the time-dependent decay of delayed-neutron emission.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Clustering in structure and reactions using configuration interaction techniques

Atomic nuclei are remarkable quantum many-body systems where clustering properties develop naturally from underlying interactions between the constituent nucleons. Clustering degrees of freedom manifest themselves in multiple structure and reaction observables. Our goal is to study nuclear clustering and its emergence in many-nucleon dynamics from nucleon-nucleon interactions. Clustering is a phenomenon that is known to emerge on the boundary between structure and reactions, therefore developing appropriate techniques that bridge the structure-reaction divide and establishing connections to observables is among our principal objectives. Showing consistency and how the new techniques can be reduced to well established other methods is an important part of this work. Here, the configuration-interaction technique based on second quantization is used to treat the quantum many-body problem assuring that fermionic antisymmetry is fully satisfied. The use of the harmonic oscillator single-particle basis allows for the center-of-mass coordinate to be separated and prepared in a desired oscillator state for each cluster. The relative motion reaction basis channels are constructed by coupling clusters in different harmonic oscillator states with respect to their relative motion. Finally, using a resonating group method strategy we solve the generalized eigenvalue problem to obtain scattering channels. Structural clustering characteristics are discussed and the modified harmonic oscillator representation for scattering equations method is used to extract scattering observables. New methods for treating clustering problems have been put forward. We demonstrate broad applicability of the developed techniques. Examples highlight connections with algebraic techniques, and the role of approximations leading to algebraic limits is assessed using realistic examples. Various types of clustering characteristics are used to study alpha clustering in light nuclei that are relevant to currently ongoing experimental efforts. We demonstrate the emergence of strongly clustered bands of states in beryllium, triple alpha channels in 12 C, and molecular type clustering in 21 Ne. Starting from nucleon-nucleon interactions without any additional assumptions scattering phase shifts for alpha-alpha scattering are determined and shown to be consistent with those observed. In this work we put forward a new configuration-interaction-based method that targets the physics of clustering, and further unifies nuclear structure and reactions. We provide detailed discussions and many examples highlighting features and advantages of the approach.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MeV-scale performance of water-based and pure liquid scintillator detectors

This paper presents studies of the performance of water-based liquid scintillators (WbLS) in both 1-kt and 50-kt detectors. In this work, performance is evaluated in comparison to both pure water Cherenkov detectors and a nominal model for pure scintillator detectors. Performance metrics include energy, vertex, and angular resolution, along with a metric for the ability to separate the Cherenkov from the scintillation signal as being representative of various particle identification capabilities that depend on the Cherenkov/scintillation ratio. We also modify the time profile of scintillation light to study the same performance metrics as a function of rise and decay time. We go on to interpret these results in terms of their impact on certain physics goals, such as solar neutrinos and the search for Majorana neutrinos. This work supports and validates previous results, and the assumptions made therein, and serves as a significant stepping stone to complete detector design studies by using a more detailed detector model and full reconstruction, with a primarily data-driven optical model, and fewer model assumptions. With this model, a high-coverage 50-kt detector achieves better than 10 (1)% precision on the flux of neutrinos from the Carbon-Nitrogen-Oxygen cycle with a water-based liquid scintillator (pure LS) target in five years of data taking. A 1-kt LS detector, with a conservative 50% fiducial volume of 0.5 kt, can achieve better than 5% detection. A liquid scintillator detector has sensitivity into the normal hierarchy region for Majorana neutrinos with half-life sensitivity of $T^{0νββ}_{1/2}$ > 1.4 × 10 28 years at 90% C.L. for 10 years of data taking with a Te-loaded target.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗