SEARCH · Search NASA

Results for “Recognizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Tailoring-Orientated Deposition of Li 2 S for Extreme Fast-Charging Lithium–Sulfur Batteries

Precipitation/dissolution of insulating Li 2 S has long been recognized as the rate-determining step in lithium-sulfur (Li-S) batteries, which dramatically undermines sulfur utilization at elevated charging rates. Herein, we present an orientated Li 2 S deposition strategy to achieve extreme fast charging (XFC, ≤15 min) through synergistic control of porosity, electronic conductivity, and anchoring sites of electrode substrate. Via magnesiothermic reduction of a zeolitic imidazolate framework, a nitrogen-doped and hierarchical porous carbon with highly graphitic phase was developed. This design effectively reduces interfacial resistance and ensures efficient sequestration of polysulfides during deposition, leading to (110)-preferred growth of Li 2 S nanocrystalline between (002)-dominated graphitic layers. Our approach directs an alternative Li 2 S deposition pathway to the commonly reported lateral growth and 3D thickening growth mode, ameliorating the electrode passivation. Therefore, a Li-S cell capable of charging/discharging at 5C (12 min) while maintaining excellent cycling stability (82% capacity retention) for 1000 cycles is demonstrated. In conclusion, even under high S loading (8.3 mg cm -2 ) and low electrolyte/sulfur ratio (3.8 mL mg -1 ), the sulfur cathode still delivers a high areal capacity of >7 mAh cm -2 for 80 cycles.

25 ENERGY STORAGE↗

DOE OSTI2016

Cathode based on molybdenum disulfide nanoflakes for lithium-oxygen batteries.

Lithium-oxygen (Li-O-2) batteries have been recognized as an emerging technology for energy storage systems owing to their high theoretical specific energy. One challenge is to find an electrolyte/cathode system that is efficient, stable, and cost-effective. We present such a system based on molybdenum disulfide (MoS2) nanoflakes combined with an ionic liquid (IL) that work together as an effective cocatalyst for discharge and charge in a Li-O-2 battery. Cyclic voltammetry results show superior catalytic performance for this cocatalyst for both oxygen reduction and evolution reactions compared to Au and Pt catalysts. It also performs remarkably well in the Li-O-2 battery system with 85% round-trip efficiency and reversibility up to 50 cycles. Density functional calculations provide a mechanistic understanding of the MoS2 nanoflakes/IL system. cocatalyst reported in this work could open the way for exploiting the unique properties of ionic liquids in Li-air batteries in combination with nanostructured MoS2 as a cathode material.

Asadi, Mohammad↗

DOE OSTI2025

Prospects of Nanoscience with Nanocrystals: 2025 Edition

Abstract Nanocrystals (NCs) of various compositions have made important contributions to science and technology, with their impact recognized by the 2023 Nobel Prize in Chemistry for the discovery and synthesis of semiconductor quantum dots (QDs). Over four decades of research into NCs has led to numerous advancements in diverse fields, such as optoelectronics, catalysis, energy, medicine, and recently, quantum information and computing. The last 10 years since the predecessor perspective “Prospect of Nanoscience with Nanocrystals” was published in ACS Nano have seen NC research continuously evolve, yielding critical advances in fundamental understanding and practical applications. Mechanistic insights into NC formation have translated into precision control over NC size, shape, and composition. Emerging synthesis techniques have broadened the landscape of compounds obtainable in colloidal NC form. Sophistication in surface chemistry, jointly bolstered by theoretical models and experimental findings, has facilitated refined control over NC properties and represents a trusted gateway to enhanced NC stability and processability. The assembly of NCs into superlattices, along with two-dimensional (2D) photolithography and three-dimensional (3D) printing, has expanded their utility in creating materials with tailored properties. Applications of NCs are also flourishing, consolidating progress in fields targeted early on, such as optoelectronics and catalysis, and extending into areas ranging from quantum technology to phase-change memories. In this perspective, we review the extensive progress in research on NCs over the past decade and highlight key areas where future research may bring further breakthroughs.

Chemistry↗

DOE OSTI2025

Nitrogen Vacancies Induce Fatigue in Ferroelectric Al 0.93 B 0.07 N

Wurtzite ferroelectrics (e.g., Al 0.93 B 0.07 N) are being explored for high-temperature and emerging near-, or in-compute, memory architectures due to the material advantages offered by their large remanent polarization and robust chemical stability. Despite these advantages, current Al0.93B0.07N devices do not have sufficient endurance lifetime to meet roadmap targets. To identify the defects responsible for this limited endurance, a combination of electronic measurements and optical spectroscopies characterized the evolution of defect states within Al 0.93 B 0.07 N with cycling. Ultrathin (∼10 nm) metal contacts were used to optically probe regions subject to ferroelectric switching; photoluminescence spectroscopy identified the emergence of a transition near 2.1 eV whose intensity scaled with the non-switching polarization quantified via positive-up negative-down (PUND) measurements. Accompanying thermally stimulated depolarization current (TSDC) and modulus spectroscopy measurements also observed the strengthening of a state near 2.1 eV. The origin of this feature is ascribed to transitions between a nitrogen vacancy and another defect deeper in the bandgap. Recognizing that the impurity concentration is largely fixed, strengthening of this transition indicates an increase in the number of nitrogen vacancies. Switching, therefore, creates vacancies in Al 0.93 B 0.07 N likely due to hot-atom damage induced by the aggressive fields necessary to switch wurtzite materials that ultimately limits endurance.

36 MATERIALS SCIENCE↗

DOE OSTI2017

Supra-Nanoparticle Functional Assemblies through Programmable Stacking

The quest for the by-design assembly of material and devices from nanoscale inorganic components is well recognized. Conventional self-assembly is often limited in its ability to control material morphology and structure simultaneously. We report a general method of assembling nanoparticles in a linear “pillar” morphology with regulated internal configurations. Our approach is inspired by supramolecular systems, where intermolecular stacking guides the assembly process to form diverse linear morphologies. Programmable stacking interactions were realized through incorporation of DNA coded recognition between the designed planar nanoparticle clusters. This resulted in the formation of multilayered pillar architectures with a well-defined internal nanoparticle organization. Furthermore, by controlling the number, position, size, and composition of the nanoparticles in each layer, a broad range of nanoparticle pillars were assembled and characterized in detail. In addition, we demonstrated the utility of this stacking assembly strategy for investigating plasmonic and electrical transport properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2018

Effects of Catalyst Processing on the Activity and Stability of Pt–Ni Nanoframe Electrocatalysts

Pt-based alloys have shown great promise as cathodic catalysts for cost-effective proton exchange membrane fuel cells. Post-synthesis treatment has been recognized as a critical step to improve the catalytic performance of Pt-based alloys. Here we present the effects of catalyst processing on the catalytic behavior of Pt-Ni nanoframe electrocatalysts in oxygen reduction reaction. The Pt-Ni nanoframes were made by corroding Ni-rich phase from solid rhombic dodecahedral particles. Three different corrosion procedures were compared. Among them, electrochemical corrosion led to the highest initial specific activity (1.35 mA cm -2 at 0.95 VRHE) by retaining more Ni in the nanoframes. However, the high activity gradually went down in a subsequent stability test due to continuous Ni loss and concomitant surface reconstruction. On the other hand, the best stability was achieved by a more aggressive corrosion using oxidative nitric acid. Although the initial activity was compromised, this procedure imparted a less-defective surface and thus the specific activity dropped by only 7% over 30,000 potential cycles. These results indicate a delicate trade-off between the activity and stability of Pt-Ni nanoframe electrocatalysts. The obtained understandings on how to balance the activity-stability trade-off via catalyst processing can be generalized to other Pt-based alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2020

ACS Sustainable Chemistry & Engineering Virtual Special Issue on Recent Advances in Biomass Characterization and Modeling

Recognizing the importance of biomass characterization and modeling, a virtual special issue (VSI) entitled Recent Advances in Biomass Characterization and Modeling was organized to showcase the recent contributions to this emerging field. This VSI features contributions from leading scientists in the biorefinery field, intending to provide the readers with the latest advances in analytical methodology and modeling to characterize biomass feedstocks and biomass-derived products. Further, the VSI contains perspectives and research articles. Advanced analytical methods that measure the mechanical, chemical, physical, biological, and other properties of biomass and biomass pyrolysis products are described along with their application’s limitations in two perspectives. Biomass is a multicomponent/multiscale, complex, nonconducting, and highly heterogeneous material; thus, it could be problematic for many characterization techniques. Traditional biomass analysis tools that are slow, laborious, and generally require harsh reagents have been replaced or supplemented by simpler and more rapid chromatographic and spectroscopic approaches such as GC-MS, HPLC, FTIR, Raman, and NMR spectroscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Amphiphilic Co-Solvents Modulate the Structure of Membrane Domains

Biofuels are an increasing part of the sustainable energy picture. This makes it a societal and economic imperative to optimize biofuel production. Mitigating the toxic effects of amphiphilic co-solvents is one way to improve the efficiency of biofuel production. Amphiphiles partition into cellular membranes, leading to membrane thinning, destabilization, loss of membrane potential, and, ultimately, cell death. However, this picture of solvent toxicity misses the disruptive impact of co-solvents on lateral membrane organization, which is increasingly recognized as critical for membrane protein sorting and oligomerization. The alteration or disruption of membrane domains has deleterious effects on cellular processes. Here, in this work, we pursue the hypothesis that membrane lateral organization is disrupted by the presence of co-solvents at concentrations lower than those which lead to full membrane destabilization. The disruption occurs due to an increasing interfacial tension between the co-existing phases, resulting in conformational changes to minimize the interfacial length-to-area ratio. This represents an unrecognized mode of solvent-induced stress and a new target for interventions to improve fermentation yields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Minimizing Toxicity and Optimizing Lubricity of Ionic Liquids for Eco-Friendly Lubrication

As much as 60 million liters of lubricating fluids end up in the environment annually, and thus, the environmental impact of lubricants is increasingly recognized in addition to meeting the rheological and tribological requirements. Although US Environmental Protection Agency-approved environmentally acceptable base fluids are available, there is a lack of additives that are both nontoxic and effective in wear protection. Here, this study reports the successful development of a new class of ionic liquids (ILs) with demonstrated significantly lower aquatic toxicity and superior friction reduction and wear protection capabilities compared with a commercial lubricant additive and some ILs reported in the literature. Specifically, ammonium phosphate and phosphonium phosphate ILs with four-carbon alkyls have been identified with balanced oil solubility, thermal stability, toxicity, and lubricity, which provide fundamental insights for future development of eco-friendly ILs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Marine Toxicity, Biodegradability, and Rolling-Sliding Tribological Performance of Ionic Liquid-Enhanced Environmentally-Acceptable Lubricants for Tidal Turbomachinery

Environmentally acceptable lubricants (EALs) are increasingly being recognized in many fields including waterpower, hydraulics, water transport, agricultural machinery, offshore wind turbines, etc. Specifically, high-performance EALs are demanded for tidal turbomachinery to ensure high efficiency and reliability and avoid the significant risk of direct contamination of the marine ecosystem upon leaks. Here we report a new development of ionic liquid (IL)-enhanced EALs for tidal energy. One short-chain phosphonium phosphate and one short-chain ammonium phosphate ILs were used as the candidate additives and the IL-containing EALs demonstrated significantly improved lubricating performance, much lower toxicity, and increased biodegradability compared with commercial baselines. Specifically, in a rolling-sliding test simulating the operation of a model tidal turbine gearbox bearing, an EAL containing the ILs at a 0.5 wt % concentration demonstrated 40% lower friction, 45% less wear loss, substantially reduced rolling contact fatigue-induced surface damage, and one order of magnitude lower vibration noise compared with a commercial gear oil. In an EPA standard toxicity test, 90 and 70% survival of marine biota was observed when exposed to an EAL containing 5 wt % of the short-chain phosphonium phosphate and ammonium phosphate ILs, respectively, while the selected commercial gear oil and bioderived additive killed all marine biota. In a standard biodegradability test, 2 wt % addition of the phosphonium phosphate IL not only retained the EAL’s ready biodegradability but further boosted the oil decomposition from a range of 60–80% to a higher level of 80–95%. Conversely, adding the commercial bioderived additive downgraded the EAL from readily to inherently biodegradable. Furthermore, this work offers scientific insights for development of ILs as potential EAL additives for marine energy and broader applications.

additives↗

DOE OSTI2019

Demonstration and Evaluation of Hybrid Microalgae Aqueous Conversion Systems for Biofuel Production

As an effort to develop affordable and sustainable energy sources, algae-derived biofuels have attracted considerable interest. As use of individual conversion processes targeting a subset of biochemical components (e.g., extraction and upgrading of lipids) has been shown to be economically unfeasible, there is a recognized need for integrated conversion systems that can valorize algal feedstocks with varying cell compositions. In this study, two hybrid systems (HBD-1, HBD-2) are proposed to enable more efficient conversion of all biomass components (lipids, proteins, carbohydrates) by leveraging two complementary systems: direct hydrothermal liquefaction (DHTL) and combined algal processing (CAP). Demonstrative experiments with Scenedesmus acutus show a 12.2-34.3% increase in fuel yields relative to individual systems (DHTL, CAP). Subsequent modeling efforts reveal substantial improvements stemming from CAP valorization of carbohydrates and lipids and DHTL valorization of proteins and CAP residuals. The maximum biomass-to-fuel conversion efficiencies for lipids/proteins/carbohydrate cell components are 79%/34%/75% (HBD-2), and techno-economic analysis suggests a 3.2-62.1% reduction in minimum fuel selling prices (MFSPs). The increased fuel yields and reduced MFSPs highlight the flexibility of the hybrid systems for biofuel production, revealing advantages of these systems for broader ranges of feedstocks, including ones not traditionally considered for fuel production.

09 BIOMASS FUELS↗

DOE OSTI2021

Programmable Aggregation of Artificial Cells with DNA Signals

Cell aggregation is a complex behavior, which is closely related to the viability, differentiation, and migration of cells. An effort to create synthetic analogs could lead to considerable advances in cell physiology and biophysics. Rendering and modulating such a dynamic artificial cell system require mechanisms for receiving, transducing, and transmitting intercellular signals, yet effective tools are limited at present. Here we construct synthetic cells from engineered lipids and show their programmable aggregation behaviors using DNA oligonucleotides as a signaling molecule. The artificial cells have transmembrane channels made of DNA origami that are used to recognize and process intercellular signals. We demonstrate that multiple small vesicles aggregate onto a giant vesicle after a transduction of external DNA signals by an intracellular enzyme, and that the small vesicles dissociate when receiving ‘release’ signals. Furthermore, this work provides new possibilities for building synthetic protocells capable of chemical communication and coordination.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2014

Consequences of Optimal Bond Valence on Structural Rigidity and Improved Luminescence Properties in Sr x Ba 2-x SiO 4 :Eu 2+ Orthosilicate Phosphors

The orthosilicate phosphors Sr x Ba 2–x SiO 4 :Eu 2+ have now been known for over four decades and have found extensive recent use in solid-state white lighting. It is well-recognized in the literature and in practice that intermediate compositions in the solid-solutions between the orthosilicates Sr 2 SiO 4 and Ba 2 SiO 4 yield the best phosphor hosts when the thermal stability of luminescence is considered. We employ a combination of synchrotron X-ray diffraction, total scattering measurements, density functional theory calculations, and low-temperature heat capacity measurements, in conjunction with detailed temperature- and time-resolved studies of luminescence properties to understand the origins of the improved luminescence properties. We observe that in the intermediate compositions, the two cation sites in the crystal structure are optimally bonded as determined from bond valence sum calculations. Optimal bonding results in a more rigid lattice, as established by the intermediate compositions possessing the highest Debye temperature, which are determined experimentally from low-temperature heat capacity measurements. Greater rigidity in turn results in the highest luminescence efficiency for intermediate compositions at elevated temperatures.

Denault, Kristin A.↗

DOE OSTI2014

Structural Evolution and Li Dynamics in Nanophase Li3PS4 by Solid-State and Pulsed Field Gradient NMR

The ceramic lithium ion conductor -Li3PS4 has a disordered and nanoporous structure that leads to an enhancement in ionic conductivity by some three orders of magnitude compared to the crystalline phase. The phase is prepared by thermal treatment of an inorganic-organic complex based on Li3PS4 and THF. Multinuclear (1H, 6,7Li, 31P) solid state NMR spectroscopy is used to characterize the structural phase evolution of the starting material at various steps in the thermal treatment. The phase formed after high temperature treatment is recognized as spectroscopically distinct from the bulk -Li3PS4 compound. Also formed is an amorphous lithium thiophosphate phase that is metastable as verified by annealing over an extended period. Lithium ion self-diffusion coefficients are measurable by standard pulsed gradient NMR methods at 100oC and with values consistent with the high ionic conductivity previously reported for this material.

energy storage↗

DOE OSTI2021

Depolymerization of Hydroxylated Polymers via Light-Driven C–C Bond Cleavage

The accumulation of persistent plastic waste in the environment is widely recognized as an ecological crisis. New chemical technologies are necessary both to recycle existing plastic waste streams into high-value chemical feedstocks and to develop next-generation materials that are degradable by design. Here, we report a catalytic methodology for the depolymerization of a commercial phenoxy resin and high molecular weight hydroxylated polyolefin derivatives upon visible light irradiation near ambient temperature. Proton-coupled electron transfer (PCET) activation of hydroxyl groups periodically spaced along the polymer backbone furnishes reactive alkoxy radicals that promote chain fragmentation through C–C bond β-scission. The depolymerization produces well-defined and isolable product mixtures that are readily diversified to polycondensation monomers. In addition to controlling depolymerization, the hydroxyl group modulates the thermomechanical properties of these polyolefin derivatives, yielding materials with diverse properties. Furthermore, these results demonstrate a new approach to polymer recycling based on light-driven C–C bond cleavage that has the potential to establish new links within a circular polymer economy and influence the development of new degradable-by-design polyolefin materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2021

Au and Pt Remain Unoxidized on a CeO 2 -Based Catalyst during the Water–Gas Shift Reaction

The active form of Au and Pt in CeO 2 based catalysts for the WGS reaction is an issue that although it has been widely studied remains unclear. On one hand, ionic species might be responsible of weakening the Ce-O bonds increasing the oxygen mobility and WGS activity. On the other hand, the close contact of Au or Pt atoms with CeO 2 oxygen vacancies at the metal/CeO 2 interface might provide the active sites for an efficient reaction. In this work, by using in-situ X-ray absorption spectroscopy, we demonstrate that both Au and Pt remain unoxidized during the reaction. Here, remarkable differences involving the dynamics established by both species under WGS atmospheres were recognized. For the pre-reduced Pt catalyst, an increase of the conversion coincided with a re-structuration of the Pt atoms into cuboctahedrical metallic particles without significant variations on the overall particle size. Contrary to the relatively static behavior of Pt 0 , Au 0 nanoparticles exhibited a sequence of particle splitting and agglomeration whilst maintaining a zero oxidation state, even though not being located in a metallic environment during the process. High WGS activity was obtained when Au atoms were surrounded by oxygen. The fact that Au preserves its unoxidized state indicates that the chemical interaction between Au and oxygen must be necessarily electrostatic being such electrostatic interaction fundamental for a top performance in the WGS process.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Hydration of a Side-Chain-Free n-Type Semiconducting Ladder Polymer Driven by Electrochemical Doping

Here, we study the organic electrochemical transistors (OECTs) performance of the ladder polymer, poly(benzimidazobenzophenanthroline) (BBL) in an attempt to better understand how an apparently hydrophobic side-chain-free polymer is able to operate as an OECT with favorable redox kinetics in an aqueous environment. We examine two BBLs of different molecular masses from different sources. Both BBLs show significant film swelling during the initial reduction step. By combining electrochemical quartz crystal microbalance (eQCM) gravimetry, in-operando atomic force microscopy (AFM), and both ex-situ and in-operando grazing incidence wide-angle x-ray scattering (GIWAXS), we provide a detailed structural picture of the electrochemical charge injection process in BBL in the absence of any hydrophilic side-chains. Compared with ex-situ measurements, inoperando GIWAXS shows both more swelling upon electrochemical doping than has previously been recognized, and less contraction upon dedoping. The data show that BBL films undergo an irreversible hydration driven by the initial electrochemical doping cycle with significant water retention and lamellar expansion that persists across subsequent oxidation/reduction cycles. This swelling creates a hydrophilic environment that facilitates the subsequent fast hydrated ion transport in the absence of the hydrophilic side-chains used in many other polymer systems. Due to its rigid ladder backbone and absence of hydrophilic side-chains, the primary BBL water uptake does not significantly degrade the crystalline order, and the original dehydrated, unswelled state can be recovered after drying. The combination of doping induced hydrophilicity and robust crystalline order leads to efficient ionic transport and good stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Intermetallic Single-Atom Alloy In–Pd Bimetallene for Neutral Electrosynthesis of Ammonia from Nitrate

Harvesting recyclable ammonia (NH 3 ) from the electrocatalytic reduction of nitrate (NO 3 RR) offers a sustainable strategy to close the ecological nitrogen cycle from nitration contamination in an energy-efficient and environmentally friendly manner. The emerging intermetallic single-atom alloys (ISAAs) are recognized to achieve the highest site density of single atoms by isolating contiguous metalatoms into single sites stabilized by another metal within the intermetallic structure, which holds promise to couple the catalytic benefits from intermetallic nanocrystals and single-atom catalysts for promoting NO 3 RR. Herein, ISAA In-Pd bimetallene, in which the Pd single atoms are isolated by surrounding In atoms, is reported to boost neutral NO 3 RR with a NH 3 Faradaic efficiency(FE) of 87.2%, a yield rate of 28.06 mg h -1 mg Pd -1 , and an exceptional electrocatalytic stability with increased activity/selectivity over 100 h and 20 cycles. The ISAA structure induces substantially diminished overlap of Pdd-orbitals and narrowed p-d hybridization of In-p and Pd-d states around the Fermi level, resulting in a stronger NO 3 - adsorption and a depressed energy barrier of the potential-determining step for NO 3 RR. Finally, further integrating the NO 3 RR catalyst into a Zn-NO 3 - flow battery as the cathode delivers a power density of 12.64 mW cm -2 and a FE of 93.4% for NH 3 production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗