Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spatial Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Quantifying the cooperative evolution of microphase segregation and nanostructural order in annealed polyurethanes of MDI-BDO-PTHF

Here, we quantify the relationship between microphase segregation and local structure development in thermoplastic polyurethanes. Samples were prepared with varying ratios of 4,40 -methylene diphenyl diisocyanate (MDI) and 1,4-butanediol (BDO) to polytetrahydrofuran (PTHF) and annealed at temperatures T a between RT–140 °C for 20 h each. Distinct populations of smaller and larger ordered domains are distinguished by pair distribution func tion analysis. The intermediate-range order of nanoscale hard domains in the paracrystalline state (form I) is directly extracted and characterized. The results suggest that form I of the MDI-BDO:PTHF system presents a conformational and packing order similar to the form III structure, typically obtained from stretching/annealing, but with limited spatial coherence of 3–7 nm. Heating above T g of the hard segments is necessary to achieve a substantial structural response from the annealing treatment. Increasing T a promotes purification of the soft phase via microphase segregation, coalescence of the hard blocks, and growth of paracrystalline phase, while a minority fraction of longer-range ordered domains left over from production remains relatively constant. We observe a composition-dependent decrease in the average nearest-neighbor dis tance that can be correlated with the greater number of C C, C N, and C O bonds with increased hard segment content. A non-linear deviation in the trend is observed to correlate with sample densification. The mechanical and thermal behavior of the samples is intimately tied to the segregation state.

processing-structure-properties↗
DOE OSTI2022

BASIN-3D: A brokering framework to integrate diverse environmental data

Diverse observational and simulation datasets are needed to understand and predict complex ecosystem behavior over seasonal to decadal and century time-scales. Integration of these datasets poses a major barrier towards advancing environmental science, particularly due to differences in the structure and formats of data provided by various sources. Here, we describe BASIN-3D (Broker for Assimilation, Synthesis and Integration of eNvironmental Diverse, Distributed Datasets), a data integration framework designed to dynamically retrieve and transform heterogeneous data from different sources into a common format to provide an integrated view. BASIN-3D enables users to adopt a standardized approach for data retrieval and avoid customizations for the data type or source. We demonstrate the value of BASIN-3D with two use cases that require integration of data from regional to watershed spatial scales. The first application uses the BASIN-3D Python library to integrate time-series hydrological and meteorological data to provide standardized inputs to analytical and machine learning codes in order to predict the impacts of hydrological disturbances on large river corridors of the United States. The second application uses the BASIN-3D Django framework to integrate diverse time-series data in a mountainous watershed in East River, Colorado, United States to enable scientific researchers to explore and download data through an interactive web portal. Thus, BASIN-3D can be used to support data integration for both web-based tools, as well as data analytics using Python scripting and extensions like Jupyter notebooks. The framework is expected to be transferable to and useful for many other field and modeling studies.

Varadharajan, C↗
DOE OSTI2022

Mean-field theory for the structure of strongly interacting active liquids

Active systems, which are driven out of equilibrium by local non-conservative forces, exhibit unique behaviors and structures with potential utility for the design of novel materials. An important and difficult challenge along the path toward this goal is to precisely predict how the structure of active systems is modified as their driving forces push them out of equilibrium. Here, we use tools from liquid-state theories to approach this challenge for a classic minimal active matter model. First, we construct a nonequilibrium mean-field framework that can predict the structure of systems of weakly interacting particles. Second, motivated by equilibrium solvation theories, we modify this theory to extend it with surprisingly high accuracy to systems of strongly interacting particles, distinguishing it from most existing similarly tractable approaches. Furthermore, our results provide insight into spatial organization in strongly interacting out-of-equilibrium systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1971

Theory of the unmagnetized plasma.

The Vlasov mathematical model of a plasma, which has come to be thought more useful than any other in describing the dynamical behavior of the majority of plasmas of interest, is first examined. Macroscopic variables and moment equations; linear electrostatics solutions; plasma oscillations, ion acoustic waves, and linear instabilities are treated, as well as external fields, 'test' charges, and nonlinear Vlasov phenomena. Plasmas are statistically described, and attention is given to the kinetic theory of the stable, uniform plasma and the Balescu-Lenard equation; two-time ensemble averages and fluctuation spectra in stable plasmas; the kinetic theory of the unstable plasma; and ensembles of Vlasov plasmas. Some illustrative experiments are described. Four appendixes deal with the electrostatic approximation and transverse waves; solution of the linearized Vlasov equation in a magnetic field; estimates of correlation functions from thermal equilibrium; and equivalence of spatially uniform BBGKY and Klimontovich correlations.

Montgomery, D. C.↗
NASA NTRS1978

Spectral evolution of multiply-impulsive solar bursts

Hard X-ray and microwave observations of multiply-impulsive solar bursts, identified in the OSO-5 data were analyzed. Spectra in both frequency ranges were used to determine whether or not the source properties change from peak to peak within individual bursts. Two categories of microwave spectral behavior were identified: those events during which the microwave turnover frequency and spectral shape remain the same from peak to peak, and those during which the turnover frequency and spectral shape change significantly. These categories correspond to two classes of multiply-impulsive bursts: those for which the emission can be characterized by a constant magnetic field and therefore a single source region, in which case the multiplicity may be due to modulation of the emission process; and those in which groups of component spikes appear to originate in regions of different magnetic-field strengths, corresponding to separate source regions which flare sequentially. Examples of the latter type of events are presented. The discrete flaring regions are analyzed and their spatial separations estimated.

Karpen, J. T.↗
NASA NTRS2001

Thalamocortical NMDA conductances and intracortical inhibition can explain cortical temporal tuning

Cells in cerebral cortex fail to respond to fast-moving stimuli that evoke strong responses in the thalamic nuclei innervating the cortex. The reason for this behavior has remained a mystery. We study an experimentally motivated model of the thalamic input-recipient layer of cat primary visual cortex that accounts for many aspects of cortical orientation tuning. In this circuit, inhibition dominates over excitation, but temporal modulations of excitation and inhibition occur out of phase with one another, allowing excitation to transiently drive cells. We show that this circuit provides a natural explanation of cortical low-pass temporal frequency tuning, provided N-methyl-D-aspartate (NMDA) receptors are present in thalamocortical synapses in proportions measured experimentally. This suggests a new and unanticipated role for NMDA conductances in shaping the temporal response properties of cortical cells, and suggests that common cortical circuit mechanisms underlie both spatial and temporal response tuning.

Synapses/metabolism↗
DOE OSTI2024

(Doublon) Benchmarking of Different Inverse Point Kinetics Implementations for an Autocorrected Reactimeter Algorithm

In November 2017, the Transient Reactor Test Facility returned to operation. Since that time, many transient test series have been completed, such as the Transient Heatsink Overpower Response capsule (THOR), the Transient Water Irradiation System for TREAT (TWIST), and Sirius. Each has provided valuable data for materials performance and reactor safety that can be applied in future designs. During each experimental series, detector count rates provided important information on the core behavior during transients. However, a limitation of these data is that variations in the neutron distribution during experiments can cause errors when attempting to infer reactivity evolution from detector signals. Neutron physics codes can be used to compute the flux shape variations. However, this is a poor solution when the experimental data is used for code verification, validation and uncertainty quantification. Indeed, if the output of the code is used both as a reference and to correct what the reference is compared to, the circular dependency limits the quality of the verification, validation and uncertainty quantification approach. To overcome this problem, the autocorrected reactimeter algorithm (ACRA) has been developed. This approach infers a time-dependent reactivity evolution by testing different spatial corrections and selecting the one that minimizes reactivity variations when the core is in a frozen configuration (i.e., when there is no variation in parameters affecting reactivity). However, the scope of this method was limited to transients where there were negligible thermal feedback. Indeed, the core is never in a frozen configuration when the fuel temperature varies during the whole transient. This is our motivation for developing an improved version of the ACRA that does not require frozen configurations. To develop this new algorithm, we need a precise and unbiased implementation of the inverse point kinetic equations (IPKEs) as any error in the reactivity evaluation will be propagated into the choice of the optimal spatial correction. Indeed, the previous reactimeter algorithm would use approximations, such as a negligible flux amplitude derivative, to focus on rapidity. For the numerical validation of ACRA, we aim at absolute error under for reactivity derived from signals similar to the one of this study. In this summary, we test eight different IPKE implementations. Each will process a mockup signal built for this study, similar to those that the future ACRA will process. Each reactivity output will be compared to the reference reactivity that has been used to generate the mockup signal. The implementation minimizing the difference with the reference reactivity will be used in the development of a new ACRA formulation.

73 - NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2001

Evolution of Local Microstructures: Spatial Instabilities of Coarsening Clusters

This work examines the diffusional growth of discrete phase particles dispersed within a matrix. Engineering materials are often microstructurally heterogeneous, and the details of the microstructure determine how well that material performs in a given application. Critical to the development of designing multiphase microstructures with long-term stability is the process of Ostwald ripening. Ripening, or phase coarsening, is diffusion-limited and arises in polydisperse multiphase materials. Growth and dissolution occur because fluxes of solute, driven by chemical potential gradients at the interfaces of the dispersed phase material, depend on particle size. Competitive kinetics of these processes dictates that larger particles grow at the expense of smaller ones, overall leading to an increase of the average particle size. The classical treatment of phase coarsening was done by Todes, Lifshitz, and Slyozov, (TLS) in the limit of zero volume fraction, V(sub V)=0 of the dispersed phase. Since the publication of TLS theory, there have been numerous investigations, many of which sought to describe the kinetic scaling behavior over a range of volume fractions. Some studies in the literature report that the relative increase in coarsening rate at low (but not zero) volume fractions compared to that predicted by TLS is proportional to V(exp 1/2)(sub v) whereas others suggest V(exp 1/3)(sub v).This issue has been addressed recently by simulation studies at low volume fractions in three dimensions by members of the Rensselaer/MSFC team.

Glicksman, Martin E.↗
DOE OSTI2023

The 2022 High-energy Outburst and Radio Disappearing Act of the Magnetar 1E 1547.0–5408

We report the radio and high-energy properties of a new outburst from the radio-loud magnetar 1E 1547.0–5408. Following the detection of a short burst from the source with Swift-BAT on 2022 April 7, observations by NICER detected an increased flux peaking at (6.0 ± 0.4) × 10 –11 erg s –1 cm –2 in the soft X-ray band, falling to a baseline level of 1.7 × 10 –11 erg s –1 cm –2 over a 17 day period. Joint spectroscopic measurements by NICER and NuSTAR indicated no change in the hard nonthermal tail despite the prominent increase in soft X-rays. Observations at radio wavelengths with Murriyang, the 64 m Parkes radio telescope, revealed that the persistent radio emission from the magnetar disappeared at least 22 days prior to the initial Swift-BAT detection and was redetected two weeks later. Such behavior is unprecedented in a radio-loud magnetar, and may point to an unnoticed slow rise in the high-energy activity prior to the detected short bursts. Finally, our combined radio and X-ray timing revealed the outburst coincided with a spin-up glitch, where the spin frequency and spin-down rate increased by 0.2 ± 0.1 μHz and (–2.4 ± 0.1) × 10 –12 s –2 , respectively. A linear increase in the spin-down rate of (–2.0 ± 0.1) × 10 –19 s –3 was also observed over 147 days of postoutburst timing. Our results suggest that the outburst may have been associated with a reconfiguration of the quasi-polar field lines, likely signaling a changing twist, accompanied by spatially broader heating of the surface and a brief quenching of the radio signal, yet without any measurable impact on the hard X-ray properties.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1986

Concentration distributions in a model combustor

A hot-wire concentration probe with a spatial resolution of 0.13 mm is used to measure concentration in a model cylindrical combustor. The flow inside the combustor is simulated by injecting a helium jet into a cylindrical confinement with or without swirling air flow present. Mean concentrations are essentially zero outside of the jet region, indicating complete confinement of the scalar field by the swirling flow. Consequently, concentration fluctuations are found to be relatively weak compared to velocity fluctuations, and are maximum off-axis at a point which corresponds to the interface between helium and air flows. However, in the absence of a swirling air flow, the helium diffuses quickly to fill the combustor. The resulting helium concentrations are constant and do not resemble the jet-like behavior of the velocity field.

Ahmed, S. A.↗
DOE OSTI2021

Effects of spatial energy distribution-induced porosity on mechanical properties of laser powder bed fusion 316L stainless steel

Laser powder bed fusion (LPBF) additive manufacturing (AM) offers a variety of advantages over traditional manufacturing, however its usefulness for manufacturing of high-performance components is currently hampered by internal defects (porosity) created during the LPBF process that have an unknown impact on global mechanical performance. By inducing porosity distributions through variations in print energy density and inspecting the resulting tensile samples using computed tomography, nearly 50,000 pores across 75 samples were identified. Porosity characteristics were quantitatively extracted from inspection data and compared with mechanical properties to understand the strength of relationships between porosity and global tensile performance. Useful porosity characteristics were identified for prediction of part performance. Results indicate that ductility and strain at ultimate tensile strength are the global tensile properties most significantly impacted by porosity and can be predicted with reasonable accuracy using simple porosity shape descriptors such as volume, diameter, and surface area. Moreover, it was found that the largest pores influenced behavior most significantly. Specifically, pores in excess of 125 µm in diameter were found to be a sufficient threshold for property estimation. These results establish an initial understanding of the complex defect-performance relationship in AM 316L stainless steel and can be leveraged to develop certification standards and improve confidence in part quality and reliability for the broader set of engineering alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Elucidating the Discharge Behavior of Aqueous Zinc Sulfur Batteries in the Presence of Molybdenum(IV) Chalcogenide Catalyst: The Criticality of Interfacial Electrochemistry

The aqueous zinc-sulfur battery holds promise for significant capacity and energy density with low cost and safe operation based on environmentally benign materials. However, it suffers from the sluggish kinetics of the conversion reaction. Here, we highlight the efficacy of molybdenum(IV) sulfide (MoS 2 ) to reduce the overpotential of S-ZnS conversion in aqueous electrolytes and study the discharge products formed at the solid-solid and solid-liquid interfaces using experimental and theoretical approaches. Specifically, the MoS 2 -catalyzed electrochemical conversion reaction is characterized via ex situ X-ray diffraction (XRD), transmission electron microscopy (TEM) with energy dispersive spectroscopy (EDS), Raman spectroscopy, synchrotron-based Mo K-edge X-ray absorption spectroscopy (XAS), and in situ synchrotron-based X-ray computed tomography (XCT). Additionally, operando synchrotron-based S K-edge XAS and X-ray fluorescence (XRF) maps are collected to determine the spatial evolution of sulfur-based species at the electrode-electrolyte interface. Further, coupling the operando S K-edge XAS data with the simulated spectra and fitting the data suggested a possible ZnS 2 intermediate phase.

25 ENERGY STORAGE↗
NASA NTRS1999

Evolution of Local Microstructures (ELMS): Spatial Instabilities of Coarsening

This work examines the diffusional growth of discrete phase particles dispersed within a matrix. Engineering materials are microstructurally heterogeneous, and the details of the microstructure determine how well that material performs in a given application. Critical to the development of designing multiphase microstructures with long-term stability is the process of Ostwald ripening. Ripening, or phase coarsening, is a diffusion-limited process which arises in polydisperse multiphase materials. Growth and dissolution occur because fluxes of solute, driven by chemical potential gradients at the interfaces of the dispersed phase material, depend on particle size. The kinetics of these processes are "competitive," dictating that larger particles grow at the expense of smaller ones, overall leading to an increase of the average particle size. The classical treatment of phase coarsening was done by Todes, Lifshitz, and Slyozov, (TLS) in the limit of zero volume fraction, V(sub v), of the dispersed phase. Since the publication of TLS theory there have been numerous investigations, many of which sought to describe the kinetic scaling behavior over a range of volume fractions. Some studies in the literature report that the relative increase in coarsening rate at low (but not zero) volume fractions compared to that / 2 1/ 3 predicted by TLS is proportional to V(sub v)(exp 1/2), whereas others suggest V(sub v)(exp 1/3). This issue has been resolved recently by simulation studies at low volume fractions in three dimensions by members of the Rensselaer/MSFC team.

Glicksman, Martin E.↗
DOE OSTI2025

Laser-induced selective local patterning of vanadium oxide phases

The same elements can form different compounds with widely different physical properties. Synthesis of a single-phase material is commonly achieved by controlling experimental conditions. Synthesizing materials that incorporate multiple specific spatially distributed chemical phases is often challenging, especially if different phases must be organized into well-defined spatial patterns. Here, we present an efficient solid reaction laser annealing (SRLA) approach to directly write regions of different local chemical compositions. We demonstrate the practical utility of our approach by locally writing microscale patterns of distinct chemical phases in vanadium oxide thin films. Specifically, we achieved the controlled local recrystallization of a uniform V 2 O 3 matrix into VO 2 , V 3 O 5 , and V 4 O 7 regions exhibiting sharp 1st- and 2nd-order metal–insulator phase transitions over a wide range of critical temperatures, i.e., a characteristic feature of select vanadium oxides that is extremely sensitive to even minute structural or compositional imperfections. We utilized the local chemical phase writing to pattern spiking oscillators with distinct electrical behavior directly in the thin film sample without employing elaborate lithography fabrication. Our laser tuning local chemical composition opens a pathway to synthesize a wide range of artificially micropatterned composite materials, with precision and control unattainable in conventional material synthesis methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Atomistic Simulations of the Elastic Compression of Platinum Nanoparticles

Abstract The elastic behavior of nanoparticles depends strongly on particle shape, size, and crystallographic orientation. Many prior investigations have characterized the elastic modulus of nanoscale particles using experiments or simulations; however their reported values vary widely depending on the methods for measurement and calculation. To understand these discrepancies, we used classical molecular dynamics simulation to model the compression of platinum nanoparticles with two different polyhedral shapes and a range of sizes from 4 to 20 nm, loaded in two different crystal orientations. Multiple standard methods were used to calculate the elastic modulus from stress-vs-strain data for each nanoparticle. The magnitudes and particle-size dependence of the resulting moduli varied with calculation method and, even for larger nanoparticles where bulk-like behavior may be expected, the effective elastic modulus depended strongly on shape and orientation. Analysis of per-atom stress distributions indicated that the shape- and orientation-dependence arise due to stress triaxiality and inhomogeneity across the particle. When the effective elastic modulus was recalculated using a representative volume element in the center of a large nanoparticle, the elastic modulus had the expected value for each orientation and was shape independent. It is only for single-digit nanoparticles that meaningful differences emerged, where even the very center of the particle had a lower modulus due to the effect of the surface. These findings provide better understanding of the elastic properties of nanoparticles and disentangle geometric contributions (such as stress triaxiality and spatial inhomogeneity) from true changes in elastic properties of the nanoscale material.

36 MATERIALS SCIENCE↗
NASA NTRS1985

The Landsat sensor's spatial responses

Based on the geometrical characteristics of the Landsat-4 and Landsat-5 Thematic Mapper (TM) and Multispectral Scanner (MSS), functions defining their spatial responses are derived, i.e., transfer functions (TF's) and line-spread functions (LSF's). These design LSF's and TF's are modified based on prelaunch component and system measurements to provide improved estimates. The two MSS instruments were comparable at their temperatures of best focus; separate calculations were performed for bands 1 and 3, band 2, and band 4. The presample nadir effective instantaneous fields of view, based on the 0.5 modulation transfer function (MTF) criteria, are 70-75 m in the track direction and 79-82 m in the scan direction. For the TM instruments, more extensive prelaunch measurements were available. LSF's derived from component measurements differed from the limited measured LSF data only in the ringing response/overshoot behavior.

Markham, B. L.↗
NASA NTRS1997

Electrical signal transmission and gap junction regulation in a bone cell network: a cable model for an osteon

A cable model is formulated to estimate the spatial distribution of intracellular electric potential and current, from the cement line to the lumen of an osteon, as the frequency of the loading and the conductance of the gap junction are altered. The model predicts that the characteristic diffusion time for the spread of current along the membrane of the osteocytic processes, 0.03 sec, is nearly the same as the predicted pore pressure relaxation time in Zeng et al. (Annals of Biomedical Engineering. 1994) for the draining of the bone fluid into the osteonal canal. This approximate equality of characteristic times causes the cable to behave as a high-pass, low-pass filter cascade with a maximum in the spectral response for the intracellular potential at approximately 30 Hz. This behavior could be related to the experiments of Rubin and McLeod (Osteoporosis, Academic Press, 1996) which show that live bone appears to be selectively responsive to mechanical loading in a specific frequency range (15-30 Hz) for several species.

NASA Discipline Musculoskeletal↗
NASA NTRS2005

Discrete element simulations of gravitational volcanic deformation: Deformation structures and geometries - 1

We have carried out two-dimensional particle dynamics simulations of granular piles subject to frictional Coulomb failure criteria to gain a first-order understanding of different modes of gravitational deformation within volcanoes. Under uniform basal and internal strength conditions, granular piles grow self-similarly, developing distinctive stratigraphies, morphologies, and structures. Piles constructed upon cohesive substrates exhibit particle avalanching, forming outward dipping strata and angle of repose slopes. Systematic decreases in basal strength lead to progressively deeper and steeper internal detachment faults and slip along a basal decollement; landslide forms grade from shallow slumps to deep-seated landslide and, finally, to axial subsidence and outward flank displacements, or volcanic spreading. Surface slopes decrease and develop concave up morphologies with decreasing decollement strength; depositional layers tilt progressively inward. Spatial variations in basal strength cause lateral transitions in pile structure, stratigraphy, and morphology. This approximation of volcanoes as Coulomb granular piles reproduces the richness of deformational structures and surface morphologies in many volcanic settings. The gentle slopes of Hawaiian volcanoes and Olympus Mons on Mars suggest weak basal decollements that enable volcanic spreading. High-angle normal faults, favored above weak decollements, are interpreted in both settings and may explain catastrophic sector collapse in Hawaii and broad aureole deposits surrounding Olympus Mons. In contrast, steeper slopes and shallow detachment faults predominate in the Canary Islands, thought to lack a weak decollement, favoring smaller, more frequent slope failures than predicted for Hawaii. The numerical results provide a useful predictive tool for interpreting dynamic behavior and associated geologic hazards of active volcanoes.

Morgan, Julia K.↗