Search NASA⌕ Search

SEARCH · Search NASA

Results for “Strategy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

An R&D Strategy to Decouple Energy from Water

Development of technologies that enable a cost-effective net-zero water consumption power plant is a critical component in a comprehensive R&D strategy to decouple this major connector in the Energy-Water Nexus.

13 HYDRO ENERGY↗

Anode-Design Strategies for Improved Performance of Polymer-Electrolyte Fuel Cells with Ultra-Thin Electrodes

Here, we report results of systematic, holistic, diagnostic, and cell studies to elucidate the mechanistic role of the experimentally determined influence of the anode gas-diffusion layer (GDL) on the performance of ultra-thin electrode polymer-electrolyte fuel cells, which can further enable fuel-cell market penetration. Measurements of product water balance and in situ neutron imaging of operational membrane-electrode-assembly water profiles demonstrate how improved performance is due to a novel anode GDL fiber-density modulated structure at the micrometer scale that removes water preferentially out of the anode, a key strategy to manage water in these cells. The banded structure results in low transport-resistance pathways, which affect water-droplet removal from the GDL surface. This interfacial effect is unexpectedly shown to be critical for decreasing overall water holdup throughout the cell. Finally, these studies demonstrate a new material paradigm for understanding and controlling fuel-cell water management and related high-power technologies or electrodes where multiphase flow occurs.

25 ENERGY STORAGE↗

The energy system transformation needed to achieve the US long-term strategy

The authors designed and executed the integrated assessment modeling for the United States long-term strategy. They bring diverse expertise to the modeling and analysis of United States decarbonization. Russell Horowitz, Matthew Binsted, and Haewon McJeon are scientists at the Joint Global Change Research Institute, a partnership between Pacific Northwest National Laboratory and the University of Maryland. Allen Fawcett, James McFarland, and Morgan Browning are economists at the Environmental Protection Agency’s Climate Economics Branch. Claire Henly is White House Fellow at the Office of the US Special Presidential Envoy for Climate. Nathan Hultman is the Director of the Center for Global Sustainability at the University of Maryland.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Unraveling the conundrum of electronic leakage in protonic ceramic cells: Operation-specific insights and rational design strategies

Electronic conduction through proton-conducting electrolytes significantly impairs the efficiency of protonic ceramic cells (PCCs). Here, in this study, we explore the electron and ion mixed transport properties of four common protonic ceramics, BaZr 0.8 Y 0.2 O 3-δ (BZY82), BaZr 0.7 Ce 0.2 Y 0.1 O 3-δ (BZCY721), BaZr 04 Ce 0.4 Y 0.1 Yb 0.1 O 3-δ (BZCYYb4411), and BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ (BZCYYb1711). It marks the first instance of investigating these properties under operation-specific scenarios: fuel side of electrolysis cell, air side of electrolysis cell, fuel side of fuel cell, and air side of the fuel cell. BZCYYb1711 exhibits the highest ionic conductivity, but two to three times higher electronic leakage when exposed to oxygen-containing environments than the others. BZY82 exhibits approximately two times higher electronic leakage in a hydrogen-containing environment. BZCY721 demonstrates excellent ion transport numbers (~0.95) across these four operating conditions. BZCYYb4411 behaves quite similarly to BZCY721. The most challenging operating environment for all candidates is the air side of fuel cell mode. This mode leads to a high initial electronic leakage, followed by a significant increase with polarization. The probable cause for this behavior is a H 2 -free, polarization-induced reduction that leads to the formation of V$^•_O$. The electron small polaron associated with V$^•_O$ is released by the electrical field due to the Poole-Frenkel effect. ZnO and NiO sintering aids are found to be detrimental to the ionic conductivity of the electrolytes. In particular, NiO substantially lowers the ion transport number. The correlation of the operation-specific electronic leakage to full cells is discussed. It is suggested that a rational PCC design should synergistically couple BZCYYb1711 at fuel side with BZCY4411 at air side to deliver a well-balanced performance and faradaic efficiency simultaneously, and the high temperature sintering process with a NiO fuel electrode should be shortened or replaced by ultra-fast sintering techniques or using a fuel electrode scaffold-infiltration fabrication strategy.

42 ENGINEERING↗

Optimization of well design and CO 2 injection strategy for risk reduction in Class VI geological carbon sequestration wells

The safety and durability of Class VI wells are critical for geological carbon sequestration (GCS). However, current GCS operations face unique challenges: unlike traditional Class II wells, Class VI CO 2 injection wells operate at rates up to 100 times higher, dramatically increasing the risk of wellbore leakage and structural compromise due to severe temperature drops and associated mechanical stresses. Despite existing guidelines on material selection, there remains a substantial gap in understanding how rapid CO 2 injection rates, low surface temperatures, and variable reservoir conditions interact to threaten long-term well integrity. This study presents a comprehensive, original workflow integrating advanced analytical and numerical models for both well flow and well integrity analysis. By systematically simulating a wide range of field-relevant scenarios—including variations in injection rate, CO 2 temperature, and reservoir pressure—this work provides the first cross-validated assessment of cooling effects on wellbore. The results reveal that extreme temperature drops, up to 60 °C, can occur under high injection rates, particularly in depleted reservoirs, significantly increasing the risk of cement failure. Building on these insights, the study proposes innovative, practical well design and operational strategies, including ductile cement formulations, pre-stressing techniques, advanced insulation coatings, and proactive management of injection rates. The safety of Class VI well extends beyond simply using CO 2 resistant materials. Cement materials should possess optimal thermo-hydraulic-mechanical-chemical properties for effective performance. This work provides a scientific basis for optimizing Class VI well designs, with direct benefits for minimizing environmental risk, lowering operational costs, and enhancing the long-term reliability of GCS.

25 ENERGY STORAGE↗

New strategy to the controllable synthesis of CuInS{sub 2} hollow nanospheres and their applications in lithium ion batteries

A new strategy has been presented to the controllable synthesis of CuInS{sub 2} hollow nanospheres based on the Cu{sub 2}O solid nanospheres as the precursor in the absence of any surfactant. Specifically, the CuInS{sub 2} hollow nanospheres result from hydrothermal transformation of the intermediate Cu{sub 7}S{sub 4} hollow nanospheres derived from Cu{sub 2}O solid nanosphere precursor by the Kirkendall effect in the conversion process. The CuInS{sub 2} hollow nanospheres with diameters of about 250 nm are assembly of nanoparticles with an average size of 20-30 nm. The composition, structure, and morphology of the Cu{sub 2}O precursor, the Cu{sub 7}S{sub 4} intermediate, and final CuInS{sub 2} product have been, respectively, characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) with selected area electron diffraction (SAED). Different from investigation of photovoltaic properties, in this work, the as-prepared CuInS{sub 2} hollow nanospheres have been explored as anode materials for rechargeable lithium ion batteries. They deliver a large initial discharge capacity of 1144 mAh g{sup -1} and exhibit good cycle performance with a discharge capacity of 265 mAh g{sup -1} after 20 cycles, which are superior to those of CuInS{sub 2} nanoparticles. The suitable surface area and relatively stable structure of the CuInS{sub 2} hollow nanospheres play an important role in their enhanced electrochemical performance as anode materials. - Graphical abstract: CuInS{sub 2} hollow nanospheres was successfully prepared from Cu{sub 2}O solid nanospheres in the absence of any surfactant, which can deliver a large initial discharge capacity of 1144 mAh g{sup -1} and exhibit good cycle performance. Highlights: Black-Right-Pointing-Pointer CuInS{sub 2} hollow nanospheres were synthesized hydrothermally from Cu{sub 2}O nanospheres. Black-Right-Pointing-Pointer The CuInS{sub 2} hollow nanospheres present high discharge capacities as anode materials. Black-Right-Pointing-Pointer Better cycling performance can be attributed to its hollow structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integration of first-principles methods and crystallographic database searches for new ferroelectrics: Strategies and explorations

In this concept paper, the development of strategies for the integration of first-principles methods with crystallographic database mining for the discovery and design of novel ferroelectric materials is discussed, drawing on the results and experience derived from exploratory investigations on three different systems: (1) the double perovskite Sr(Sb{sub 1/2}Mn{sub 1/2})O{sub 3} as a candidate semiconducting ferroelectric; (2) polar derivatives of schafarzikite MSb{sub 2}O{sub 4}; and (3) ferroelectric semiconductors with formula M{sub 2}P{sub 2}(S,Se){sub 6}. A variety of avenues for further research and investigation are suggested, including automated structure type classification, low-symmetry improper ferroelectrics, and high-throughput first-principles searches for additional representatives of structural families with desirable functional properties. - Graphical abstract: Integration of first-principles methods with crystallographic database mining, for the discovery and design of novel ferroelectric materials, could potentially lead to new classes of multifunctional materials. Highlights: Black-Right-Pointing-Pointer Integration of first-principles methods and database mining. Black-Right-Pointing-Pointer Minor structural families with desirable functional properties. Black-Right-Pointing-Pointer Survey of polar entries in the Inorganic Crystal Structural Database.

36 MATERIALS SCIENCE↗

Novel heterometallic metal–azido complex synthesized by “one-step” reaction: synthetic strategy and magnetic properties

A novel heterometallic complex, [Ni{sub 2}Mn(N{sub 3}){sub 2}(nic){sub 4}·(H{sub 2}O){sub 2}]{sub n} (1) (nic=nicotinate), was obtained by assembling MnCl{sub 2}·4H{sub 2}O, Ni(NO{sub 3}){sub 2}·6H{sub 2}O, NaN{sub 3} and nicotinic acid with a “one step” synthetic strategy—hydrothermal reaction. The 3D structure of the complex can be described as end-on (EO) azido and syn,syn carboxylates mixed bridged by alternate Ni–Mn–Ni trimers linked by the nicotinate. Dominant ferromagnetic interactions were observed between the Ni{sup II} and Mn{sup II} ions in the trimer. - Graphical abstract: A novel heterometallic 3D complex [Ni{sub 2}Mn(N{sub 3}){sub 2}(nic){sub 4}·(H{sub 2}O){sub 2}]{sub n} (1) (nic=nicotinate) was synthesized by hydrothermal reaction. This complex exhibits interesting structural and magnetic properties. - Highlights: • It is difficult to construct simple coordination complexes with azide as “ligands” to obtain heterometallic metal–azido compounds. • A “one-step” method—hydrothermal reaction— was introduced to avoid the disadvantages of azide mentioned above. • The magnetic property is different with the isostructural homometal–azido complex due to the changed metal center.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A convenient strategy to functionalize carbon nanotubes with ascorbic acid and its effect on the physical and thermomechanical properties of poly(amide–imide) composites

Multi-walled carbon nanotubes (MWCNTs) were functionalized by ascorbic acid by a fast strategy under microwave irradiation to improve interfacial interactions and dispersion of CNTs in a poly(amide–imide) (PAI) matrix. This technique provides a rapid and economically viable route to produce covalently functionalized CNTs. The as-prepared, new type of functionalized CNTs were analyzed by several techniques. The thermal stabilities and mechanical interfacial properties of CNT/PAI composites were investigated using several techniques. The dispersion state of CNTs in the PAI matrix was observed by field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The mechanical interfacial property of the composites was significantly increased by the addition of ascorbic acid treated CNTs. The FE-SEM and TEM results showed that the separation and uniform dispersion of CNTs in the PAI matrix. The overview of these recent results is presented. -- Graphical abstract: Presentation of possible interactions of hydrogen bonding between the MWCNT-AS and the PAI chains. Highlights: • Surface functionalization of MWCNTs with ascorbic acid under microwave irradiation. • The MWCNT-AS/PAI composite films were fabricated by solution blending process. • Microstructure and MWCNT states in the composites were studied. • Thermal and mechanical properties of the composite films were evaluated. • Films of different contents of the MWCNTs-AS showed a superior tensile behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluating vaccination strategies for tuberculosis in endemic and non-endemic settings

According to the World Health Organization, tuberculosis (TB) is the leading cause of death from infectious disease worldwide. While there is no effective vaccine against adult pulmonary TB, more than a dozen vaccine candidates are in the clinical trial pipeline. These include both pre-exposure vaccines to prevent initial infections and post-exposure vaccines to prevent reactivation of latent disease. Many epidemiological models have been used to study TB, but most have not included a continuous age structure and the possibility of both pre- and post-exposure vaccination. Incorporating age-dependent death rates, disease properties, and social contact data allows for more realistic modeling of disease spread. Here, we propose a continuous age-structured model for the epidemiology of tuberculosis with pre- and post-exposure vaccination. We use uncertainty and sensitivity analysis to make predictions about the efficacy of different vaccination strategies in a non-endemic setting (United States) and an endemic setting (Cambodia). In particular, we determine optimal age groups to target for pre-exposure and post-exposure vaccination in both settings. We find that the optimal age groups tend to be younger for Cambodia than for the US, and that post-exposure vaccination has a significantly larger effect than pre-exposure vaccination in the US.

60 APPLIED LIFE SCIENCES↗

Electron backscatter diffraction: Strategies for reliable data acquisition and processing

In electron backscatter diffraction (EBSD) software packages there are many user choices both in data acquisition and in data processing and display. In order to extract maximum scientific value from an inquiry, it is helpful to have some guidelines for best practice in conducting an EBSD investigation. The purpose of this article therefore is to address selected topics of EBSD practice, in a tutorial manner. The topics covered are a brief summary on the principles of EBSD, specimen preparation, calibration of an EBSD system, experiment design, speed of data acquisition, data clean-up, microstructure characterisation (including grain size) and grain boundary characterisation. This list is not meant to cover exhaustively all areas where EBSD is used, but rather to provide a resource consisting of some useful strategies for novice EBSD users.

36 MATERIALS SCIENCE↗

Synthesis of ZSM-23/ZSM-22 intergrowth zeolite with a novel dual-template strategy

ZSM-23/ZSM-22 intergrowth zeolite with fixed proportion of 60%ZSM-23/40%ZSM-22 has been synthesized with a novel dual-template strategy. The products were characterized by X-ray diffraction and scanning electron microscopy. Dimethylamine and diethylamine were used together as a dual-template system. The molar ratio of diethylamine to dimethylamine, which was changed with the type of aluminum source, was the key factor for the synthesis of intergrowth zeolites. A molar ratio of diethylamine to dimethylamine of 1:24 could result in an ZSM-23/ZSM-22 intergrowth zeolite if aluminum sulfate was used as aluminum source, whereas a molar ratio of diethylamine to dimethylamine of 1:12 was required to get an ZSM-23/ZSM-22 intergrowth zeolite if sodium metaaluminate was used. Furthermore, fluoride anion could be involved in the process as a crystallization promoter.

36 MATERIALS SCIENCE↗

A new strategy to diminish the 4 V voltage plateau of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4}

Graphical abstract: The annealed sample LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} cannot eliminate the 4-V voltage plateau completely. The Mg-doped compound LiNi{sub 0.5}Mn{sub 1.45}Mg{sub 0.05}O{sub 4} can effectively diminish the 4 V voltage plateau during charge and discharge process. - Highlights: • Mg-doped compound LiNi{sub 0.5}Mn{sub 1.45}Mg{sub 0.05}O{sub 4} was prepared. • The 4 V voltage plateau in the charge–discharge curves of LiNi{sub 0.5}Mn{sub 1.45}Mg{sub 0.05}O{sub 4} was diminished. • Compound LiNi{sub 0.5}Mn{sub 1.45}Mg{sub 0.05}O{sub 4} exhibited good electrochemical properties. - Abstract: As for spinel LiNi{sub 0.5}Mn{sub 1.5}O{sub 4}, there is 4 V voltage plateau in the charge–discharge profiles. This voltage plateau can be reduced by an annealing process, however it is hard to avoid it completely. In this study, a new strategy of partial substitution for Mn by Mg is applied. There is no 4 V voltage plateau in the charge–discharge profiles of Mg-doped compound LiNi{sub 0.5}Mn{sub 1.45}Mg{sub 0.05}O{sub 4}. This compound exhibits good electrochemical properties which can be used as cathode material of lithium ion batteries. At 1 C rate, it can deliver a capacity of around 129 mAh g{sup −1} and remain good cycle performance.

36 MATERIALS SCIENCE↗

A dual strategy for improving lithium storage performance, a case of Fe{sub 2}O{sub 3}

Graphical abstract: The α-Fe{sub 2}O{sub 3} nanoellipse with180–230 nm (edge length) and 140–170 nm (edge width) has been synthesize and tested as anode material for LIBs. The α-Fe{sub 2}O{sub 3} nanoellipse electrode with sodium alginate (SA) binder exhibits greatly enhanced performance for lithium storage. - Highlights: • α-Fe{sub 2}O{sub 3} nanoellipses were fabricated by a simple hydrothermal method with glycine. • The elliptical α-Fe{sub 2}O{sub 3}-SA electrode exhibits enhanced lithium storage performance. • The reason for the enhanced performance of elliptical α-Fe{sub 2}O{sub 3}-SA was investigated. - Abstract: In this paper, we developed a dual strategy, the nanostructure engineering of active material and the proper choice of binder, to achieve excellent lithium storage performance of transition metal oxides. α-Fe{sub 2}O{sub 3} nanoellipses with a mean size of 180–230 nm (edge length) and 140–170 nm (edge width) were fabricated by a simple hydrothermal method in the presence of glycine. When tested as anode material for lithium ion batteries (LIBs), the α-Fe{sub 2}O{sub 3} nanoellipse electrode with sodium alginate (SA) binder exhibits greatly enhanced performance for lithium storage. The capacity could be retained as high as 1164 mA h g{sup −1} at a current density of 100 mA g{sup −1} for over 60 cycles. Even cycled at high current densities of 2000–5000 mA g{sup −1}, high capacities of 443–628 mA h g{sup −1} can be achieved, whereas the electrode with the conventional poly(vinylidene fluoride) (PVDF) binder suffers from rapid capacity decay under the same test conditions.

36 MATERIALS SCIENCE↗

Sodium citrate-assisted anion exchange strategy for construction of Bi{sub 2}O{sub 2}CO{sub 3}/BiOI photocatalysts

Highlights: • Heterostructured Bi{sub 2}O{sub 2}CO{sub 3}/BiOI microspheres were prepared via anion exchange. • Sodium citrate-assisted anion exchange for construction of composite photocatalysts. • Bi{sub 2}O{sub 2}CO{sub 3}/BiOI composites show high visible light photocatalytic activity. - Abstract: Bi{sub 2}O{sub 2}CO{sub 3}/BiOI heterojuncted photocatalysts were constructed through a facile partial anion exchange strategy starting from BiOI microspheres and urea with the assistance of sodium citrate. The content of Bi{sub 2}O{sub 2}CO{sub 3} in the catalysts was regulated by modulating the amount of urea as a precursor, which was decomposed to generate CO{sub 3}{sup 2−} in the hydrothermal process. Citrate anion plays a key role in controlling the morphology and composition of the products. The Bi{sub 2}O{sub 2}CO{sub 3}/BiOI catalysts display much higher photocatalytic activity than pure BiOI and Bi{sub 2}O{sub 2}CO{sub 3} towards the degradation of rhodamine B (RhB) and bisphenol A (BPA). The enhancement of photocatalytic activity of the heterojuncted catalysts is attributed to the formation of p–n junction between p-BiOI and n-Bi{sub 2}O{sub 2}CO{sub 3}, which is favorable for retarding the recombination of photoinduced electron-hole pairs. Moreover, the holes are demonstrated to be the main active species for the degradation of RhB and BPA.

36 MATERIALS SCIENCE↗

A facile strategy to fabricate plasmonic Cu modified TiO{sub 2} nano-flower films for photocatalytic reduction of CO{sub 2} to methanol

Graphical abstract: Photoreduction of CO{sub 2} to CH{sub 3}OH over plasmonic Cu/TiO{sub 2} film. - Highlights: • Cu nanoparticles modified TiO{sub 2} nano-flower film was prepared by a facile strategy. • Cu nanoparticles can enhance the light absorption and the Raman scattering of TiO{sub 2}. • Cu nanoparticles can effectively restrain the recombination of the charge carriers. • A synergistic mechanism is proposed for photocatalytic reduction of CO{sub 2} on Cu/TiO{sub 2} film. - Abstract: Cu nanoparticles (NPs) deposited TiO{sub 2} nano-flower films were fabricated using a combination of a hydrothermal method and a microwave-assisted reduction process. The investigations indicated that Cu NPs and TiO{sub 2} film both exhibit visible light harvesting properties based on localized surface plasmon resonance (LSPR) of Cu NPs and unique nanostructures of TiO{sub 2} film. Fluorescence quenching was observed because the recombination of charge carriers was effectively suppressed by Cu NPs deposition. The experimental results indicate that Cu/TiO{sub 2} films exhibit better activity for the photocatalytic reduction of CO{sub 2} due to the charge transfer property and LSPR effect of Cu NPs. The CH{sub 3}OH production rate reached 1.8 μmol cm{sup −2} h{sup −1} (energy efficiency was 0.8%) over 0.5 Cu/TiO{sub 2} film under UV and visible light irradiation, which was 6.0 times higher than that observed over pure TiO{sub 2} film. In addition, a tentative photocatalytic mechanism is proposed to understand the experimental results over the Cu modified TiO{sub 2} nano-flower films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hierarchically macro–mesoporous TiO{sub 2} film via self-assembled strategy for enhanced efficiency of dye sensitized solar cells

Highlights: • A new hierarchically macro–mesoporous TiO{sub 2} film is fabricated via TiF{sub 4} hydrolysis. • TiF{sub 4} hydrolysis is accompanied with self-assembled process of TiO{sub 2} nanoparticles. • The hierarchically porous TiO{sub 2} films show higher performance than nonporous film. - Abstract: The hierarchically porous structure of TiO{sub 2} film plays an important role on improved photoelectric conversion efficiency in dye-sensitized solar cells (DSSCs). It is highly required to develop a facile strategy to prepare the hierarchical porous photoelectrode. In this study, a novel hierarchically macro–mesoporous TiO{sub 2} film as photoelectrode of DSSCs is fabricated by a self-assembled process of TiO{sub 2} nanoparticles via TiF{sub 4} hydrolysis. The hydrolysis of TiF{sub 4} is accompanied with self-assembled process of TiO{sub 2} nanoparticles on the surface of electrophoretic-deposited titanate nanotube film which provides effective active sites for the deposition of TiO{sub 2} nanoparticles owing to a large amount of hydroxyl groups, resulting in the formation of hierarchically porous structures. The hierarchically porous TiO{sub 2} film is mainly composed of mesopores with a size of 2–50 nm and macropores with a wide range of 0.5–5 μm, which contribute to an obviously higher conversion performance (6.70%) than nonporous P25-TiO{sub 2} film (4.01%). The main reasons for enhanced conversion efficiency of hierarchically porous TiO{sub 2} film can be attributed to adsorption of more dye molecules, rapid diffusion and efficient transport of electrolyte, and longer electron lifetime. This work may provide new insights into preparing porous structure of TiO{sub 2} films in DSSCs for modification of photoelectric conversion efficiency.

36 MATERIALS SCIENCE↗

On optical properties and scintillation performance of emerging Ga 2 O 3 : Crystal growth, emission mechanisms and doping strategies

As an emerging ultra-wide bandgap compound semiconductor, Ga 2 O 3 has attracted rapidly growing interest due to its unique physical properties for harsh condition applications. Compared to Ga 2 O 3 ’s electrical-characteristic based uses, such as power electronics, photodetectors and solar cells, a much less explored area for Ga 2 O 3 is its promising optical properties and its related scintillation capabilities. Undoped Ga 2 O 3 is a strong scintillator with excellent scintillation characteristics such as fast decay constants and encouraging light yield which is comparable to that of the classic Bi 4 Ge 3 O 12 (BGO) scintillator. The scintillation capability of Ga 2 O 3 can be precisely tuned via a series of approaches including systematic crystal growth control, post-growth annealing, targeted doping, and optimization of operation temperature. Here we summarize exciting progress of Ga 2 O 3 scintillators which have been pursued over the past few years. Our efforts cover a series of growth techniques of Ga 2 O 3 materials as well as discussion of emission mechanisms. Here we dedicate a targeted portion toward the doping strategies to improve the performance of Ga 2 O 3 . A detailed analysis is provided to compare the impact of different dopants. Through these efforts, we hope to provide useful perspectives to help accelerate the development of high performance Ga 2 O 3 scintillators.

36 MATERIALS SCIENCE↗