Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Probing the Excited State of Methylcobalamin Using Polarized Time-Resolved X-ray Absorption Spectroscopy

We use picosecond time-resolved polarized X-ray absorption near-edge structure (XANES) measurements to probe the structure of the long-lived photoexcited state of methylcobalamin (MeCbl) and the cob(II)alamin photoproduct formed following photoexcitation of adenosylcobalamin (AdoCbl, coenzyme B12). For MeCbl, we used 520 nm excitation and a time delay of 100 ps to avoid the formation of cob(II)alamin. We find only small spectral changes in the equatorial and axial directions, which we interpret as arising from small (<~0.05 Å) changes in both the equatorial and axial distances. This confirms expectations based on prior UV–visible transient absorption measurements and theoretical simulations. We do not find evidence for the significant elongation of the Co–C bond reported by Subramanian [ J. Phys. Chem. Lett. 2018, 9, 1542–1546] following 400 nm excitation. For AdoCbl, we resolve the difference XANES contributions along three unique molecular axes by exciting with both 540 and 365 nm light, demonstrating that the spectral changes are predominantly polarized along the axial direction, consistent with the loss of axial ligation. These data suggest that the microsecond “recombination product” identified by Subramanian et al. is actually the cob(II)alamin photoproduct that is produced following bond homolysis of MeCbl with 400 nm excitation. Our results highlight the pronounced advantage of using polarization-selective transient X-ray absorption for isolating structural dynamics in systems undergoing atomic displacements that are strongly correlated to the exciting optical polarization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of High and Low Salt Concentration in Electrolytes at Lithium–Metal Anode Surfaces

The use of high concentration salts in electrolyte solutions of lithium-sulfur (Li-S) batteries has been shown beneficial for mitigating some effects such as polysulfide shuttle and dendrite growth at the Li metal anode. Such complex solutions have structural, dynamical, and reactivity associated issues that need to be analyzed for a better understanding of the reasons behind such beneficial effects. A passivation interfacial layer known as solid-electrolyte interphase (SEI) is generated during battery cycling as a result of electron transfer from the metal anode causing electrolyte decomposition. Here in this work, we investigate using density functional theory and ab initio molecular dynamics simulations the salt decomposition, solvation effects, interactions among intermediate products and other species, and potential components of the SEI layer as a function of chemical nature and concentration of the salt, for lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium bis(fluorosulfonyl)imide (LiFSI) at 1M and 4M concentrations in dimethoxyethane. It is found that LiTFSI undergoes a less complete reduction and facilitates charge transfer from the anode, whereas LiFSI shows a more complete decomposition forming LiF as one of the main SEI products. In addition, the specific decomposition mechanisms of each salt clearly point to the initial SEI components and the potential main products derived from them. Finally, very complex networks are found among the salt and solvent molecules in their attempt to maximize Li ion solvation that is quantified through the determination of coordination numbers.

25 ENERGY STORAGE↗

Measuring Intermolecular Excited State Geometry for Favorable Singlet Fission in Tetracene

Singlet fission (SF) is the process of converting an excited singlet to a pair of excited triplets. Harvesting two charges from a single photon has the potential to increase photovoltaic device efficiencies. Acenes, such as tetracene and pentacene, are model molecules for studying SF. Despite SF being an endoergic process for tetracene and exoergic for pentacene, both acenes exhibit near unity SF quantum efficiencies, raising questions about how tetracene can overcome the energy barrier. Here, we use recently developed instrumentation to measure inelastic neutron scattering (INS) while optically exciting the model molecules using two different excitation energies. The spectroscopic results reveal intermolecular structural relaxation due to the presence of a triplet excited state. Here, the structural dynamics of the combined excited state molecule and surrounding tetracene molecules are further studied using time-dependent density functional theory (TD-DFT), which shows that the singlet and triplet levels shift due to the excited state geometry, reducing the uphill energy barrier for SF to within kT.

36 MATERIALS SCIENCE↗

Molecular origins of the zeta potential

The zeta potential (ZP) is an oft-reported measure of the macroscopic charge state of solid surfaces and colloidal particles in contact with solvents. However, the origin of this readily measurable parameter has remained divorced from the molecular-level processes governing the underlying electrokinetic phenomena, which limits its usefulness. Here, we connect the macroscopic measure to the microscopic realm through nonequilibrium molecular dynamics simulations of electroosmotic flow between parallel slabs of the hydroxylated (110) rutile (TiO 2 ) surface. These simulations provided streaming mobilities, which were converted to ZP via the commonly used Helmholtz-Smoluchowski equation. A range of rutile surface charge densities (0.1 to –0.4 C/m 2 ), corresponding to pH values between about 2.8 and 9.4, in RbCl, NaCl, and SrCl 2 aqueous solutions, were modeled and compared to experimental ZPs for TiO 2 particle suspensions. Simulated ZPs qualitatively agree with experiment and show that “anomalous” ZP values and inequalities between the point of zero charge derived from electrokinetic versus pH titration measurements both arise from differing co- and counterion sorption affinities. We show that at the molecular level the ZP arises from the delicate interplay of spatially varying dynamics, structure, and electrostatics in a narrow interfacial region within about 15 Å of the surface, even in dilute salt solutions. This contrasts fundamentally with continuum descriptions of such interfaces, which predict the ZP response region to be inversely related to ionic strength. In reality the properties of this interfacial region are dominated by relatively immobile and structured water. Furthermore, viscosity values are substantially greater than in the bulk, and electrostatic potential profiles are oscillatory in nature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multicomponent and Multiphase Lipid Nanotubes Formed by Gliding Microtubule-Kinesin Motility and Phase-Separated Giant Unilamellar Vesicles

Cytoskeletal filaments and motor proteins are critical components in the transport and reorganization of membrane-based organelles in eukaryotic cells. Previous studies have recapitulated the microtubule-kinesin transport system in vitro to dynamically assemble large-scale nanotube networks from multilamellar liposomes and polymersomes. Moving toward more biologically relevant systems, this work examines whether lipid nanotube (LNT) networks can be generated from giant unilamellar vesicles (GUVs) and subsequently characterizes how the lipid composition may be tuned to alter the dynamics, structure, and fluidity of networks. Here, we describe a two-step process in which microtubule motility (i) drives the transport and aggregation of GUVs to form structures with a decreased energy barrier for LNT formation and (ii) extrudes LNTs without destroying parent GUVs, allowing for the formation of large LNT networks. We further show that the lipid composition of the GUV influences formation and morphology of the extruded LNTs and associated networks. For example, LNTs formed from phase-separated GUVs (e.g., liquid–solid phase-separated and coexisting liquid-ordered and liquid-disordered phase-separated) display morphologies related to the specific phase behavior reflective of the parent GUVs. Overall, the ability to form nanotubes from compositionally complex vesicles opens the door to generating lipid networks that more closely mimic the structure and function of those found in cellular systems.

59 BASIC BIOLOGICAL SCIENCES↗

Ordering pathway of block copolymers under dynamic thermal gradients studied by in situ GISAXS

Dynamic thermal gradient-based processes for directed self-assembly of block copolymer (BCP) thin films such as cold zone annealing (CZA) have demonstrated much potential for rapidly fabricating highly ordered patterns of BCP domains with facile orientation control. As a demonstration, hexagonally packed predominantly vertical cylindrical morphology, technologically relevant for applications such as membranes and lithography, was achieved in 1 μm thick cylinder-forming PS-b-PMMA (cBCP) films by applying sharp thermal gradients (CZA-Sharp) at optimum sample sweep rates. A thorough understanding of the molecular level mechanisms and pathways of the BCP ordering that occur during this CZA-S process is presented, useful to fully exploit the potential of CZA-S for large-scale BCP-based device fabrication. To that end, we developed a customized CZA-S assembly to probe the dynamic structure evolution and ordering of the PS-b-PMMA cBCP film in situ as it undergoes the CZA-S process using the grazing incidence small-angle X-ray scattering (GISAXS) technique. Four distinct regimes of BCP ordering were observed within the gradient that include microphase separation from an “as cast” unordered state (Regime I), evolution of vertical cylinders under a thermally imposed strain gradient (Regime II), reorientation of a fraction of cylinders due to preferential substrate interactions (Regime III), and finally grain-coarsening on the cooling edge (Regime IV). The ordering pathway in the different regimes is further described within the framework of an energy landscape. A novel aspect of this study is the identification of a grain-coarsening regime on the cooling edge of the gradient, previously obscure in zone annealing studies of BCPs. Furthermore, such insights into the development of highly ordered BCP nanostructures under template-free thermal gradient fields can potentially have important ramifications in the field of BCP-directed self-assembly and self-assembling polymer systems more broadly.

36 MATERIALS SCIENCE↗

NMR Methodologies for the Detection and Quantification of Nanostructural Defects in Silicone Networks

Here, we present and discuss a sensitive spectroscopic means of detecting and quantifying network defects within a series of polysiloxane elastomers through a novel application of 19F solution state nuclear magnetic resonance (NMR). Polysiloxanes are the most utilized non-carbon polymeric material today. Their final network structure is complex, hierarchical, and often ill-defined due to modification. Characterization of these materials with respect to starting and age-dependent network structure is obfuscated by the intractable nature of polysiloxane network elastomers. We report a synthetic strategy for selectively tagging chain-end silanols with an organofluorine compound, which may then be conveniently and quantitatively measured as a function of structure and environment by means of 19 F NMR. This study represents a new and sensitive means of directly quantifying aspects of network architecture in polysiloxane materials and has the potential to be a powerful new tool for the spectroscopic assessment of structural dynamic response in polysiloxane networks.

36 MATERIALS SCIENCE↗

Absolute Intra-Molecular Distance Measurements with Ångström-Resolution using Anomalous Small-Angle X-ray Scattering

Accurate determination of molecular distances is fundamental to understanding the structure, dynamics, and conformational ensembles of biological macromolecules. Here we present a method to determine the full,distance,distribution between small (~7 Å) gold labels attached to macromolecules with very high-precision(≤1 Å) and on an absolute distance scale. Our method uses anomalous small-angle X-ray scattering close to a gold absorption edge to separate the gold-gold interference pattern from other scattering contributions. Results for 10-30 bp DNA constructs achieve excellent signal-to-noise and are in good agreement with previous results obtained by single-energy,SAXS measurements without requiring the preparation and measurement of single labeled and unlabeled samples. Finally, the use of small gold labels in combination with ASAXS read out provides an attractive approach to determining molecular distance distributions that will be applicable to a broad range of macromolecular systems.

47 OTHER INSTRUMENTATION↗

Morphology-Controlled Discharge Profile and Reversible Cu Extrusion and Dissolution in Biomimetic CuS

Metal sulfides, such as CuS, SnS2, Co9S8, MoS2, are high capacity anode materials for Li-ion batteries. However, these materials go through a conversion reaction with Li+, which is accompanied by the phase transformation and inevitably results in a huge volume expansions, therefore causing performance degradation. Here, we report nanoscale engineering route to efficiently control the overall volume expansion for enhanced performance. We engineered CuS with nanoplate assembly on a nanostring, leading to a nanostructure of mimicking the crassula baby necklace (CBN) in the natural plant. Using in-situ transmission electron microscopy (in-situ TEM), we probed the lithiation kinetics and dynamic structural transformations. Due to the linkage of the central nanostring, the CuS CBN exhibited fast Li+ diffusion along the axial direction and high mechanical stability during lithiation. The volume expansion was minimal for the CuS CBN due to the pre-engineered gap between these plates. The CuS followed a two-step lithiation process with Cu2S and Li2S formation as the first step and Cu extrusion from Cu2S in the later stage. Interestingly, during the Cu2S to Cu conversion, there was a incubation period before the metallic Cu extrusion, which is featured by the formation of an amorphous structure due to the large lattice strain and distortion associated with the displacement of Cu by Li ions. In the final stage, the lithiated amorphous phase recrystallized to a composite of Cu nanocrystals dispersed in a polycrystalline Li2S matrix. Associate with the nanoscale size, the Cu nanocrystals can reversibly dissolve into the matrix upon delithiation. The present work demonstrates tailoring of desired functionality through nanoscale engineering of using bionic methods.

Han, Shaobo↗

Reversing the Tradeoff between Rate and Overpotential in Molecular Electrocatalysts for H 2 Production

A longstanding challenge in molecular electrocatalysis is to design catalysts that break away from the tradeoff between rate and overpotential arising from electronic scaling relationships. In this paper, we report an inversion of the rate–overpotential correlation through system-level design of [Ni(P R 2 N R ' 2 ) 2 ] 2+ electrocatalysts for the production of H 2 . The overpotential is lowered by an electron-withdrawing ligand, while the turnover frequency is increased by controlling the catalyst structural dynamics, using both ligand design and solvent viscosity. The cumulative effect of controlling each of these system components is an electrocatalyst with a turnover frequency of 70000 s –1 and an overpotential of 230 mV, corresponding to a 100-fold rate enhancement and a 170 mV reduction in overpotential in comparison to the parent nickel catalyst. Molecular Tafel plot analysis reveals that the new catalysts reported here are substantially more efficient than other leading molecular electrocatalysts for the production of H 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Big Effect of Small Nanoparticles: A Shift in Paradigm for Polymer Nanocomposites

Polymer nanocomposites (PNCs) are important materials that are widely used in many current technologies and potentially have broader applications in the future due to their excellent property of tunability, light weight and low cost. But, expanding the limits in property enhancement remains a fundamental scientific challenge. We demonstrate that well-dispersed, small (diameter ~1.8 nm) nanoparticles with attractive interactions lead to unexpectedly large and qualitatively new changes in PNC structural dynamics in comparison to conventional composites based on particles of diameter ~10-50 nm. At the same time, the zero-shear viscosity at high temperatures remains comparable to that of the neat polymer, thereby retaining good processibility and resolving a major challenge in PNC applications. These results suggest that the nanoparticle mobility and relatively short lifetimes of nanoparticlepolymer associations open qualitatively new horizons in tunability of macroscopic properties in nanocomposites with high potential for the development of new functional materials.

36 MATERIALS SCIENCE↗

Nanocrystal Geometry Governs Phase Transformation Pathways in Palladium Hydride

Pathways and structural dynamics of phase transformations impact performance of materials in energy and information storage technologies. Palladium hydride (PdH x ) nanocrystals are an ideal model system for studying solute-induced phase transformations, where elastic energy from lattice mismatch between α-PdH x and β-PdH x phases is often considered a key to determining the transformation pathways. α/β-PdH x interfacial elastic energy is affected by the confined geometry of a nanocrystal. However, how nanocrystal geometry influences phase transformation pathways is largely unknown. Using in situ liquid phase transmission electron microscopy, we directly visualize hydrogenation in Pd nanocrystals with two geometries, a nanocube and a hexagonal nanoplate. Both follow similar sequences of an initially curved nucleus, interface flattening, and reverse-stage nucleation; however, their evolving α/β-PdH x interfaces exhibit geometry-dependent crystallographic alignments. In nanocubes, {100}-aligned configurations conform to static elastic energy ordering, representing a pathway that maintains a local mechanical equilibrium, whereas nanoplates display both {110}- and {211}-aligned interfaces. Theoretical simulations show that geometry determines the accessibility of alternative phase transformation pathways as the system is driven far from equilibrium during hydrogenation. In conclusion, these findings identify geometry as a fundamental parameter for directing phase transformation pathways, offering design principles for accessing atypical configurations and improving properties of intercalation-based devices.

Lee, Daewon [Lawrence Berkeley National Laboratory↗

REACH coarse-grained simulation of a cellulose fiber

A molecular level understanding of the structure, dynamics and mechanics of cellulose fibers can aid in understanding the recalcitrance of biomass to hydrolysis in cellulosic biofuel production. Here, a residue-scale REACH (Realistic Extension Algorithm via Covariance Hessian) coarse-grained force field was derived from all-atom molecular dynamics (MD) simulations of the crystalline Iβ cellulose fibril. REACH maps the atomistic covariance matrix onto coarse-grained elastic force constants. The REACH force field was found to reproduce the positional fluctuations and low-frequency vibrational spectra from the all-atom model, allowing elastic properties of the cellulose fibril to be characterized using the coarse-grained force field with a speedup of >20 relative to atomistic MD on systems of the same size. The calculated longitudinal/transversal Young s modulus and the velocity of sound are in agreement with experiment. The persistence length of a 36-chain cellulose microcrystal was estimated to be ~380 μm. In conclusion, the normal-mode analysis with the REACH force field suggests that intrinsic dynamics might facilitate the deconstruction of the cellulose fibril from the hydrophobic surface.

59 BASIC BIOLOGICAL SCIENCES↗

Incorporating Peptides in the Outer Coordination Sphere of Bio-inspired Electrocatalysts for Hydrogen Production

Four new cyclic 1,5-diaza-3,7-diphosphacyclooctane ligands have been prepared and used to synthesize [Ni(PPh2NR2)2]2+ complexes in which R is a mono- or dipeptide. These complexes represent a first step in developing an outer coordination sphere for this class of complexes that can mimic the outer coordination sphere of the active sites of hydrogenase enzymes. Importantly, these complexes retain the electrocatalytic activity of the parent [Ni(PPh2NPh2)2]2+ complex in acetonitrile solution with turnover frequencies (TOF) for hydrogen production ranging from 14 to 25 s-1 in the presence of p-cyanoanilinium trifluoromethanesulphonic acid and 135-1000 s-1 in the presence of triflic acid salt of protonated dimethylformamide, with moderately low overpotentials, ~0.3 V. The addition of small amounts of water result in rate increases of 5-7 times. Unlike the parent complex, these complexes demonstrate dynamic structural transformations in solution whereby the dipeptide tail interacts with the nickel center. These results establish a building block from which larger peptide scaffolding can be added to allow the [Ni(PR2NR’2)2]2+ molecular catalytic core to begin to mimic the multifunctional outer coordination sphere of enzymes. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

08 HYDROGEN↗

Tocopherol Activity Correlates with its Location in a Membrane: A New Perspective on the Anti-Oxidant Vitamin E

We show evidence of an antioxidant mechanism for vitamin E which correlates strongly with its physical location in a model lipid bilayer. This data addresses the overlooked problem of the physical distance between the vitamin's reducing hydrogen and lipid acyl chain radicals. Our combined data from neutron diffraction, NMR and UV spectroscopy experiments, all suggest that reduction of reactive oxygen species and lipid radicals occurs specifically at the membrane's hydrophobic-hydrophilic interface. The latter is possible when the acyl chain snorkels to the interface from the hydrocarbon matrix. Moreover, not all model lipids are equal in this regard, as indicated by the small differences in vitamin's location. The present result is a clear example of the importance of lipid diversity in controlling the dynamic structural properties of biological membranes. Importantly, our results suggest that measurements of aToc oxidation kinetics, and its products, should be revisited by taking into consideration the physical properties of the membrane in which the vitamin resides.

Marquardt, Drew↗

Tunable and Cooperative Thermomechanical Properties of Protein-Metal-Organic Frameworks

We recently introduced protein-metal-organic frameworks (protein-MOFs) as chemically designed protein crystals, composed of ferritin nodes that predictably assemble into 3D lattices upon coordination of various metal ions and ditopic, hydrox-amate-based linkers. Owing to their unique tripartite construction, protein-MOFs possess extremely sparse lattice connectivi-ty, suggesting that they might display unusual thermomechanical properties. Leveraging the synthetic modularity of ferritin-MOFs, we investigated the temperature-dependent structural dynamics of six distinct frameworks. Our results show that the thermostabilities of ferritin-MOFs can be tuned through the metal component or the presence of crowding agents. Our stud-ies also reveal a framework that undergoes a reversible and isotropic first-order phase transition near-room temperature, corre-sponding to a 4% volumetric change within ≤1 deg C and a hysteresis window of ~10 deg C. Here, this highly cooperative crystal-to-crystal transformation, which stems from the soft crystallinity of ferritin-MOFs, illustrates the advantage of modular con-struction strategies in discovering tunable–and unpredictable–material properties.

36 MATERIALS SCIENCE↗