Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

A measurement of the equation of state of carbon envelopes of white dwarfs

White dwarfs represent the final state of evolution for most stars. Certain classes of white dwarfs pulsate, leading to observable brightness variations, and analysis of these variations with theoretical stellar models probes their internal structure. Modelling of these pulsating stars provides stringent tests of white dwarf models and a detailed picture of the outcome of the late stages of stellar evolution. However, the high-energy-density states that exist in white dwarfs are extremely difficult to reach and to measure in the laboratory, so theoretical predictions are largely untested at these conditions. In this paper we report measurements of the relationship between pressure and density along the principal shock Hugoniot (equations describing the state of the sample material before and after the passage of the shock derived from conservation laws) of hydrocarbon to within five per cent. The observed maximum compressibility is consistent with theoretical models that include detailed electronic structure. This is relevant for the equation of state of matter at pressures ranging from 100 million to 450 million atmospheres, where the understanding of white dwarf physics is sensitive to the equation of state and where models differ considerably. The measurements test these equation-of-state relations that are used in the modelling of white dwarfs and inertial confinement fusion experiments, and we predict an increase in compressibility due to ionization of the inner-core orbitals of carbon. We also find that a detailed treatment of the electronic structure and the electron degeneracy pressure is required to capture the measured shape of the pressure–density evolution for hydrocarbon before peak compression. Our results illuminate the equation of state of the white dwarf envelope (the region surrounding the stellar core that contains partially ionized and partially degenerate non-ideal plasmas), which is a weak link in the constitutive physics informing the structure and evolution of white dwarf stars.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantification of Dissolved O 2 in Bulk Aqueous Solutions and Porous Media Using NMR Relaxometry

Effects of dissolved paramagnetic oxygen (O 2 ) in water on 1 H nuclear magnetic resonance (NMR) Carr-Purcell-Meiboom-Gill (CPMG) experiments is evaluated at a 1 H Larmor frequency of 2 MHz. Dissolution of O 2 into water significantly reduces the 1 H transverse relaxation coefficient (T 2 ). For deoxygenated water, T 2 is 3388 ms, water at ambient atmospheric conditions (7.4 mg/L O2) exhibits a T2 of 2465 ms, and dissolution of 2710 mg/L O 2 further reduces T 2 to 36 ms. The results were fit with an empirical model to facilitate prediction of T 2 times for bulk water as a function of paramagnetic oxygen concentrations in solution. Dissolved O 2 also greatly influences 1 H NMR CPMG experiments of confined water in a model system composed of Berea sandstone. For this system, 90 mg/L O 2 in H 2 O enhances T 2 relaxation of bulk water such that the relaxation time is comparable to physically confined water in the sandstone pores. Given the sensitivity of NMR T 2 coefficients to paramagnetic oxygen, low-field NMR-based characterization of fluid and porous media structure requires control of dissolved oxygen, as geospatial variation in the partial pressure of O 2 alone is expected to perturb fluid and pore relaxation times by up to 60 and 36%, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

H-Abstraction reactions by OH, HO 2 , O, O 2 and benzyl radical addition to O 2 and their implications for kinetic modelling of toluene oxidation

Here, alkylated aromatics constitute a significant fraction of the components commonly found in commercial fuels. Toluene is typically considered as a reference fuel. Together with n-heptane and iso-octane, it allows for realistic emulations of the behavior of real fuels by the means of surrogate mixture formulations. Moreover, it is a key precursor for the formation of poly-aromatic hydrocarbons, which are of relevance to understanding soot growth and oxidation mechanisms. In this study the POLIMI kinetic model is first updated based on the literature and on recent kinetic modelling studies of toluene pyrolysis and oxidation. Then, important reaction pathways are investigated by means of high-level theoretical methods, thereby advancing the present knowledge on toluene oxidation. H-Abstraction reactions by OH, HO 2 , O and O 2 , and the reactivity on the multi well benzyl-oxygen (C 6 H 5 CH 2 + O 2 ) potential energy surface (PES) were investigated using electronic structure calculations, transition state theory in its conventional, variational, and variable reaction coordinate forms (VRC-TST), and master equation calculations. Exploration of the effect on POLIMI model performance of literature rate constants and of the present calculations provides valuable guidelines for implementation of the new rate parameters in existing toluene kinetic models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assigning value to energy storage systems at multiple points in an electrical grid

The ability to define the potential value that energy storage systems (ESS) could generate through various applications in electric power systems, and an understanding of how these values change due to variations in locations, ESS performance and parameters, market structure, utility structures, and valuation methodologies is highly important in advancing ESS deployment. This paper presents the outcome of an effort to assign benefits values, or more precisely ranges of values, to major ESS applications, and summarize and evaluate the capabilities of several available tools currently used to estimate value for specific ESS deployments.

energy storage valuation, balducci, energy storage↗

Structures of Al{sub n}, its anions and cations up to n=34: A theoretical investigation

A systematic density functional study has been performed for neutral and singly charged clusters of aluminum with up to 34 atoms. A thorough search for global minimum structures has been carried out for Al{sub n} employing genetic algorithm and basin-hopping procedures. For Al{sub n} this confirms results of previous investigations up to n=22; new global minima have been located for n=23-31, 33. Structures for singly charged cations and anions have been obtained by reoptimization of the pool of 40 low-energy structures of the neutral clusters. The global minima of charged and neutral clusters are always low-spin states with the possible exception of a triplet state of Al{sub 28}, which is isoenergetic with a singlet. The cluster structures are mostly quite irregular and do not resemble fractions of the fcc bulk phase. High symmetries are found only for the global minimum of Al{sub 23} and the triplet state of Al{sub 28}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Various forms of indexing HDMR for modelling multivariate classification problems

The Indexing HDMR method was recently developed for modelling multivariate interpolation problems. The method uses the Plain HDMR philosophy in partitioning the given multivariate data set into less variate data sets and then constructing an analytical structure through these partitioned data sets to represent the given multidimensional problem. Indexing HDMR makes HDMR be applicable to classification problems having real world data. Mostly, we do not know all possible class values in the domain of the given problem, that is, we have a non-orthogonal data structure. However, Plain HDMR needs an orthogonal data structure in the given problem to be modelled. In this sense, the main idea of this work is to offer various forms of Indexing HDMR to successfully model these real life classification problems. To test these different forms, several well-known multivariate classification problems given in UCI Machine Learning Repository were used and it was observed that the accuracy results lie between 80% and 95% which are very satisfactory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The minor pilin PilV provides a conserved adhesion site throughout the antigenically variable meningococcal type IV pilus

Type IV pili (T4P) are among the most widespread adhesive factors in prokaryotes. In pathogenic Neisseria, the major pilin, which provides the structural framework for the filamentous T4P, undergoes antigenic variation allowing the bacteria to evade the humoral immune response without impacting host-cell adhesion. Here, we show that a minor pilin, PilV, is distributed throughout the pilus and contributes to Neisseria meningitidis adhesion and that antibodies to PilV block meningococcal adhesion in vivo. Our results provide a mechanism whereby N. meningitidis varies its immunodominant major pilin to escape antibody recognition while maintaining conserved sites throughout the pilus for host receptor binding. They further suggest a strategy to prevent or block deadly N. meningitidis infections by targeting this minor pilin.

59 BASIC BIOLOGICAL SCIENCES↗

Pressure-gradient-induced Alfvén eigenmodes: II. Kinetic excitation with ion temperature gradient

The kinetic excitation of ideal magnetohydrodynamic (MHD) discrete Alfvén eigenmodes in the second MHD ballooning stable domain is studied in the presence of a thermal ion temperature gradient (ITG), using linear gyrokinetic particle-in-cell simulations of a local flux tube in shifted-circle tokamak geometry. The instabilities are identified as α-induced toroidal Alfvén eigenmodes (αTAE); that is, bound states trapped between pressure-gradient-induced potential barriers of the Schrödinger equation for shear Alfvén waves. Using numerical tools, we examine in detail the effect of kinetic thermal ion compression on αTAEs; both non-resonant coupling to ion sound waves and wave–particle resonances. It is shown that the Alfvénic ITG instability thresholds (e.g., the critical temperature gradient) are determined by two resonant absorption mechanisms: Landau damping and continuum damping. The numerical results are interpreted on the basis of a theoretical framework previously derived from a variational formulation. The present analysis of properties and structures of Alfvénic fluctuations in the presence of steep pressure gradients applies for both positive or negative magnetic shear and can serve as an interpretative framework for experimental observations in (future) high-performance fusion plasmas of reactor relevance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Atacama Cosmology Telescope: DR6 constraints on extended cosmological models

We use new cosmic microwave background (CMB) primary temperature and polarization anisotropy measurements from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) to test foundational assumptions of the standard cosmological model, ΛCDM, and set constraints on extensions to it. We derive constraints from the ACT DR6 power spectra alone, as well as in combination with legacy data from the Planck mission. To break geometric degeneracies, we include ACT and Planck CMB lensing data and baryon acoustic oscillation data from DESI Year-1. To test the dependence of our results on non-ACT data, we also explore combinations replacing Planck with WMAP and DESI with BOSS, and further add supernovae measurements from Pantheon+ for models that affect the late-time expansion history. We verify the near-scale-invariance (running of the spectral index dn s /d ln k = 0.0062 ± 0.0052) and adiabaticity of the primordial perturbations. Neutrino properties are consistent with Standard Model predictions: we find no evidence for new light, relativistic species that are free-streaming (N eff = 2.86 ± 0.13, which combined with astrophysical measurements of primordial helium and deuterium abundances becomes N eff = 2.89 ± 0.11), for non-zero neutrino masses (∑m ν < 0.089 eV at 95% CL), or for neutrino self-interactions. We also find no evidence for self-interacting dark radiation (N idr < 0.134), or for early-universe variation of fundamental constants, including the fine-structure constant (α EM /α EM,0 = 1.0043 ± 0.0017) and the electron mass (m e /m e,0 = 1.0063 ± 0.0056). Our data are consistent with standard big bang nucleosynthesis (we find Y p = 0.2312 ± 0.0092), the COBE/FIRAS-inferred CMB temperature (we find T CMB = 2.698 ± 0.016 K), a dark matter component that is collisionless and with only a small fraction allowed as axion-like particles, a cosmological constant (w = -0.986 ± 0.025), and the late-time growth rate predicted by general relativity (γ = 0.663 ± 0.052). We find no statistically significant preference for a departure from the baseline ΛCDM model. In fits to models invoking early dark energy, primordial magnetic fields, or an arbitrary modified recombination history, we find H 0 = 69.9 +0.8 -1.5 , 69.1 ± 0.5, or 69.6 ± 1.0 km/s/Mpc, respectively; using BOSS instead of DESI BAO data reduces the central values of these constraints by 1–1.5 km/s/Mpc while only slightly increasing the error bars. In general, models introduced to increase the Hubble constant or to decrease the amplitude of density fluctuations inferred from the primary CMB are not favored over ΛCDM by our data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

HELIOSEISMIC RESPONSE TO THE X2.2 SOLAR FLARE OF 2011 FEBRUARY 15

The X2.2-class solar flare of 2011 February 15 produced a powerful 'sunquake' event, representing a helioseismic response to the flare impact in the solar photosphere, which was observed with the Helioseismic and Magnetic Imager (HMI) instrument on board the Solar Dynamics Observatory (SDO). The impulsively excited acoustic waves formed a compact wave packet traveling through the solar interior and appearing on the surface as expanding wave ripples. The initial flare impacts were observed in the form of compact and rapid variations of the Doppler velocity, line-of-sight magnetic field, and continuum intensity. These variations formed a typical two-ribbon flare structure, and are believed to be associated with thermal and hydrodynamic effects of high-energy particles heating the lower atmosphere. The analysis of the SDO/HMI and X-ray data from RHESSI shows that the helioseismic waves were initiated by the photospheric impact in the early impulsive phase, observed prior to the hard X-ray (50-100 keV) impulse, and were probably associated with atmospheric heating by relatively low-energy electrons ({approx}6-50 keV) and heat flux transport. The impact caused a short motion in the sunspot penumbra prior to the appearance of the helioseismic wave. It is found that the helioseismic wave front traveling through a sunspot had a lower amplitude and was significantly delayed relative to the front traveling outside the spot. These observations open new perspectives for studying the flare photospheric impacts and for using the flare-excited waves for sunspot seismology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preserving isohydricity: vertical environmental variability explains Amazon forest water-use strategies

Abstract Increases in hydrological extremes, including drought, are expected for Amazon forests. A fundamental challenge for predicting forest responses lies in identifying ecological strategies which underlie such responses. Characterization of species-specific hydraulic strategies for regulating water-use, thought to be arrayed along an ‘isohydric–anisohydric’ spectrum, is a widely used approach. However, recent studies have questioned the usefulness of this classification scheme, because its metrics are strongly influenced by environments, and hence can lead to divergent classifications even within the same species. Here, we propose an alternative approach positing that individual hydraulic regulation strategies emerge from the interaction of environments with traits. Specifically, we hypothesize that the vertical forest profile represents a key gradient in drought-related environments (atmospheric vapor pressure deficit, soil water availability) that drives divergent tree water-use strategies for coordinated regulation of stomatal conductance (gs) and leaf water potentials (ΨL) with tree rooting depth, a proxy for water availability. Testing this hypothesis in a seasonal eastern Amazon forest in Brazil, we found that hydraulic strategies indeed depend on height-associated environments. Upper canopy trees, experiencing high vapor pressure deficit (VPD), but stable soil water access through deep rooting, exhibited isohydric strategies, defined by little seasonal change in the diurnal pattern of gs and steady seasonal minimum ΨL. In contrast, understory trees, exposed to less variable VPD but highly variable soil water availability, exhibited anisohydric strategies, with fluctuations in diurnal gs that increased in the dry season along with increasing variation in ΨL. Our finding that canopy height structures the coordination between drought-related environmental stressors and hydraulic traits provides a basis for preserving the applicability of the isohydric-to-anisohydric spectrum, which we show here may consistently emerge from environmental context. Our work highlights the importance of understanding how environmental heterogeneity structures forest responses to climate change, providing a mechanistic basis for improving models of tropical ecosystems.

Forestry↗

Composition dependence of bulk properties in the Co-intercalated transition metal dichalcogenide $\mathrm{Co_{1/3}TaS_2}$

Spontaneous Hall conductivity has recently been reported in the triangular lattice antiferromagnet Co 1/3 TaS 2 under a zero magnetic field. This phenomenon originates from the distinctive noncoplanar triple-Q magnetic ground state, possessing uniform real-space Berry curvature characterized by scalar spin chirality. We investigated the physical properties of Co 1/3 TaS 2 by judiciously controlling the composition, revealing a drastic change in its bulk properties, even by slight variations in cobalt composition, despite the same crystal structure. For 0.299≤x≤0.325, Co x TaS 2 keeps all the characteristics of the ground state consistent with the previous studies—two antiferromagnetic phase transitions at T N1 and T N2 ( N1 ), a large spontaneous Hall conductivity [σ xy (H=0)], and a weak ferromagnetic moment along the c axis. However, samples with x≥0.330 exhibit distinct bulk properties, including the absence of both σ xy (H=0) and the weak ferromagnetic moment. Our neutron diffraction data reveal that Co x TaS 2 with x≥0.330 develops coplanar helical magnetic order with q m1 =(1/3, 0, 0). This is entirely different from what has been seen in x≤0.325, explaining the observed composition dependence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cosmological fluctuation growth in bimetric MOND

I begin to look at the growth of weak density inhomogeneities of nonrelativistic matter, in bimetric-MOND (BIMOND) cosmology. Far from making an exhaustive study, I concentrate on one attractive cosmological scenario, which employs matter-twin-matter-symmetric versions of BIMOND, and, furthermore, assumes that, on average, the universe is symmetrically populated in the two sectors. MOND effects are totally absent in an exactly symmetric universe, apart from the significant possible appearance of a cosmological constant, {Lambda}{approx}(a{sub 0}/c){sup 2}. MOND effects--local and cosmological--do enter when density inhomogeneities that differ in the two sectors appear and develop. MOND later takes its standard form in systems that are islands dominated by pure matter, as are presumably the well scrutinized systems such as galaxies. I derive the nonrelativistic (weak-field-slow-motion) equations governing small-scale fluctuation growth. The equations split into two uncoupled systems, one for the sum, the other for the difference, of the fluctuations in the two sectors. The former is governed strictly by Newtonian dynamics, and describes standard growth of fluctuations. The latter is governed by MOND dynamics, which entails stronger gravity, and nonlinearity even for the smallest of perturbations. These cause the difference to grow faster than the sum, leading to anticorrelated perturbations, conducing to matter-twin-matter segregation (which continues for high overdensities). The nonlinearity also causes interaction between nested perturbations on different scales. Because matter and twin matter (TM) repel each other in the MOND regime, matter inhomogeneities grow not only by their own self-gravity, but also through shepherding by flanking twin matter overdensities (and vice versa). The relative importance of gravity and pressure in the MOND system (analog of the Jeans criterion), depends also on the strength of the perturbation. MOND gravity, which scales as the square root of the difference perturbation, holds sway over pressure for any mass, for weak enough perturbations. The development of structure in the universe, in either sector, thus depends crucially on two initial fluctuation spectra: that of matter alone and that of the matter-TM difference. I also discuss the backreaction on cosmology of BIMOND effects that appear as ''phantom matter'' (interpreted by some as 'dark matter'), resulting from inhomogeneity differences between the two sectors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Universal Behavior of Pair Correlations in a Strongly Interacting Fermi Gas

We show that short-range pair correlations in a strongly interacting Fermi gas follow a simple universal law described by Tan's relations. This is achieved through measurements of the static structure factor which displays a universal scaling proportional to the ratio of Tan's contact to the momentum C/q. Bragg spectroscopy of ultracold {sup 6}Li atoms from a periodic optical potential is used to measure the structure factor for a wide range of momenta and interaction strengths, providing broad confirmation of this universal law. We calibrate our Bragg spectra using the f-sum rule, which is found to improve the accuracy of the structure factor measurement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anomalous stress response of ultrahard WB n compounds

Boron-rich tungsten borides are premier prototypes of a new class of ultrahard compounds. Here, we show by first-principles calculations that their stress-strain relations display surprisingly diverse and anomalous behavior under a variety of loading conditions. Most remarkable is the dramatically changing bonding configurations and deformation modes with rising boron concentration in WB n (n=2, 3, 4), resulting in significantly different stress responses and unexpected indentation strength variations. This novel phenomenon stems from the peculiar structural arrangements in tungsten borides driven by boron’s ability to form unusually versatile bonding states. Our results elucidate the intriguing deformation mechanisms that define a distinct type of ultrahard material. Here, these new insights underscore the need to explore unconventional structure-property relations in a broad range of transition-metal light-element compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging surface topography with coherent x-ray reflectivity: Theory, kinematics, and simulations

A theoretical formalism is described for understanding coherent x-ray reflectivity (CXR) from the surface of a semi-infinite crystal having a variable surface topography, described by the height profile ℎ(𝑥,𝑦). The surface topography is imaged as a complex “effective density,” obtained from the phasing and inversion of the coherent x-ray reflectivity data, measured through a rocking scan centered at a vertical momentum transfer 𝑄$^{0}_{𝑧}$ and a vertical range Δ⁢𝑄 𝑧 . The formalism predicts that the effective density has an amplitude with a maximum located at the surface height for each position within the surface plane. The phase of the effective density has a lateral variation that is controlled by the surface height and a vertical variation that reflects a combination of the interfacial structure and specific choice of measurement conditions. This understanding enables direct observation of nanometer-scale interfacial topography, i.e., ℎ⁡(𝑥,𝑦)⁢𝑐 𝑠 (where 𝑐 𝑠 is the vertical substrate lattice parameter) with Å-scale sensitivity to surface height. Numerical simulations illustrate and confirm the theoretical results. These results show how the interpretation of the interfacial density phase obtained by CXR data inversion (i.e., surface topography with respect to a flat surface) is conceptually similar to that previously known for Bragg coherent diffraction imaging (BCDI) measurements of isolated nanoparticles (i.e., lattice displacements with respect to an ideal crystal lattice). This suggests that CXR can be thought of as a form of dark field imaging with respect to the bright field BCDI approach. An implication of these results is that interfacial imaging may bypass some of the significant challenges associated with BCDI imaging of multiple particles having different orientations.

X-ray imaging↗

Efficacious Qubit Mappings for Quantum Simulations of the 12 C Rotational Band

Solving atomic nuclei from first principles places enormous demands on computational resources, which grow exponentially with increasing number of particles and the size of the space they occupy. We present first quantum simulations based on the variational quantum eigensolver for the low-lying structure of the 12C nucleus that provide acceptable bound-state energies even in the presence of noise. Here, we achieve this by taking advantage of two critical developments. First, we utilize an almost perfect symmetry of atomic nuclei that, in a complete symmetry-adapted basis, drastically reduces the size of the model space. Second, we use the efficacious Gray encoding, for which it has been recently shown that it is resource efficient, especially when coupled with a near band-diagonal structure of the nuclear Hamiltonian.

Encoding↗

Brachytherapy structural shielding calculations using Monte Carlo generated, monoenergetic data

Purpose: To provide a method for calculating the transmission of any broad photon beam with a known energy spectrum in the range of 20–1090 keV, through concrete and lead, based on the superposition of corresponding monoenergetic data obtained from Monte Carlo simulation. Methods: MCNP5 was used to calculate broad photon beam transmission data through varying thickness of lead and concrete, for monoenergetic point sources of energy in the range pertinent to brachytherapy (20–1090 keV, in 10 keV intervals). The three parameter empirical model introduced byArcher et al. [“Diagnostic x-ray shielding design based on an empirical model of photon attenuation,” Health Phys. 44, 507–517 (1983)] was used to describe the transmission curve for each of the 216 energy-material combinations. These three parameters, and hence the transmission curve, for any polyenergetic spectrum can then be obtained by superposition along the lines of Kharrati et al. [“Monte Carlo simulation of x-ray buildup factors of lead and its applications in shielding of diagnostic x-ray facilities,” Med. Phys. 34, 1398–1404 (2007)]. A simple program, incorporating a graphical user interface, was developed to facilitate the superposition of monoenergetic data, the graphical and tabular display of broad photon beam transmission curves, and the calculation of material thickness required for a given transmission from these curves. Results: Polyenergetic broad photon beam transmission curves of this work, calculated from the superposition of monoenergetic data, are compared to corresponding results in the literature. A good agreement is observed with results in the literature obtained from Monte Carlo simulations for the photon spectra emitted from bare point sources of various radionuclides. Differences are observed with corresponding results in the literature for x-ray spectra at various tube potentials, mainly due to the different broad beam conditions or x-ray spectra assumed. Conclusions: The data of this work allow for the accurate calculation of structural shielding thickness, taking into account the spectral variation with shield thickness, and broad beam conditions, in a realistic geometry. The simplicity of calculations also obviates the need for the use of crude transmission data estimates such as the half and tenth value layer indices. Although this study was primarily designed for brachytherapy, results might also be useful for radiology and nuclear medicine facility design, provided broad beam conditions apply.

61 RADIATION PROTECTION AND DOSIMETRY↗