Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMAL STRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Tensile creep properties of a CrMnFeCoNi high-entropy alloy

Tensile creep tests were performed on a CrMnFeCoNi high-entropy alloy at temperatures from 1023 K to 1173 K. A uniform stress exponent 3.7 ± 0.1 was found across all temperatures. The apparent activation energies of creep under various applied stresses were determined to be around 230 kJ/mol and decrease with increasing stress, indicating a stress-assisted, thermally activated behavior. Steady-state creep microstructures feature no subgrain formation and high dislocation density within grains. Based on our results, the creep rate of CrMnFeCoNi is believed to be controlled by both dislocation-dislocation interactions and dislocation-lattice interactions.

36 MATERIALS SCIENCE↗

Chemically Tunable Aspect Ratio Control and Laser Refrigeration of Hexagonal Sodium Yttrium Fluoride Upconverting Materials

Hexagonal sodium yttrium fluoride with Na 3x Y 2-x F 6 stoichiometry (β-NaYF) is a promising material for luminescence upconversion applications due to the narrow crystal field splitting of the Yb(III) ion’s lower 2 F 7/2 manifold. However, growing single crystals of β-NaYF remains an outstanding challenge due to thermal expansion stresses that cause cracking during melt growth. Here, we demonstrate a novel hydrothermal synthesis of β-NaYF with the ability to tune the aspect ratio from microplatelets to microrods with aspect ratios that match computationally predicted cavity (Mie) resonances. These crystals have a root-mean-square roughness below 1 nm after calcination, which makes them ideal for optical cavities. The β-NaYF microcrystals are doped with 10% Yb(III) cations and are used to build optomechanical laser-refrigeration devices consisting of a hexagonal β-NaYF crystal located at the end of a cantilever. Laser refrigeration of these devices by >12.5 °C is observed using calibrated measurements of both the cantilever’s fundamental eigenfrequency and a Boltzmann fit to crystal field luminescence from the Yb(III) ions.

36 MATERIALS SCIENCE↗

Electrically Accelerated Mechanochemical Film Formation by a Phosphonium Phosphate Ionic Liquid: An In Situ Chemical Kinetics Investigation

Powertrains in electric vehicles are exposed to stray currents that accelerate wear and cause failure of mechanical components. These durability issues are further aggravated when using low-viscosity lubricants, which are desired for energy efficiency but create harsher contact conditions at sliding interfaces. This study investigates a phosphonium phosphate ionic liquid as a performance-enhancing additive in a low-viscosity base oil for lubricating electrified sliding interfaces. Ionic liquids can adsorb and react on contact interfaces via stress-assisted chemical reactions, generating nanometric tribofilms that provide protection against wear. However, the effect of electric fields on the mechanochemistry of ionic liquids is poorly understood, hindering their adoption in lubricants for electrified powertrains. This article reports an in situ optical interferometry study of ionic liquid derived tribofilm growth kinetics at stressed sliding/rolling interfaces under direct currents. The application of electric currents accelerated tribofilm formation up to a critical current density (∼1.4 A/mm 2 ), beyond which pitting-induced wear dominated. The tribofilms were composed of iron phosphates, iron oxides, and carbon species, with iron oxides becoming predominant under applied currents. These tribofilms prevented the scuffing failure of steel surfaces under electrified conditions. Based on the results, a kinetic model is proposed that integrates electric current effect into the classical stress-assisted thermal activation framework to allow prediction of tribofilm growth at electrified sliding contacts. This framework provides crucial guidance for designing next-generation lubricants for electrified transportation and power generation systems.

additives↗

Scanning electron and cathodoluminescence imaging of thin film Lu{sub 2}SiO{sub 5}:Ce scintillating materials

Cerium doped lutetium orthosilicate thin films were sputter deposited onto rough and smooth alumina substrates to compare their extrinsic photoluminescence efficiency. To understand the photoluminescence results, scanning electron and cathodoluminescence imaging were performed. The plane view and cross-section images revealed that dark cathodoluminescence regions were correlated with topology in both films, though the mechanisms for the degraded luminescence were different. For the rough films, substrate topology causes localized shadowing of the sputtered species which creates compositional inhomogeneities. The smooth films have protrusions caused by thermally induced stress and the reduced cathodoluminescence intensity is attributed to electron-hole surface recombination.

36 MATERIALS SCIENCE↗

Control of magnetic anisotropy in (111)SmAl{sub 2} films

This study enlightens how the magnetic anisotropy might be tailored in magnetic films by the proper choice of the substrate. Single crystalline (111)SmAl{sub 2} films have been grown by molecular beam epitaxy on two substrates: (1120)Al{sub 2}O{sub 3} and (111)CaF{sub 2}. Hysteresis loops measured along the different crystallographic directions are the signature of the following: (i) a uniaxial anisotropy with an easy direction perpendicular to the (111) growth plane when the film is grown on Al{sub 2}O{sub 3}; (ii) a [111] hard magnetic direction when the film is grown on CaF{sub 2}. This effect can be understood if we consider the influence of the thermal strains on the various energy terms which govern the easy magnetization direction. The relevant parameters to determine the easy magnetization direction are the relative sign and absolute values of the strains and of the magnetoelastic constants.

36 MATERIALS SCIENCE↗

Probabilistic Fracture Analysis of Functionally Graded Materials--Part I: Uncertainty and Probabilistic Analysis Method

Probabilistic fracture analysis is performed for predicting uncertain fracture responses of Functionally Graded Material (FGM) structures. The uncertainties in material properties including Young's modulus and fracture toughness are considered. The limit state function for a crack initiation event is defined in terms of the J-integral for FGMs. The First-Order-Reliability-Method (FORM) is used in conjunction with a finite element code that computes the J-integral with high accuracy. A two-step probabilistic analysis procedure is proposed to investigate the effects of the uncertainties in the spatial distribution of Young's modulus on the probability of crack initiation in FGMs. First, we investigate the effects of the uncertainties in the shape of the spatial distribution by considering the slope and the location of the inflection point of a spatial distribution profile as random quantities. Second, we investigate the effects of the spatial fluctuations of Young's modulus by making use of a discretized random field. The companion paper (Part II) implements this method into a finite element fracture analysis code and presents numerical examples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preparation of Functionally Graded Materials (FGMs) Using Coal Fly Ash and NiCr-Based Alloy Powder by Spark Plasma Sintering (SPS)

Functionally Graded Materials (FGMs) were prepared by spark plasma sintering (SPS) using coal fly ash and NiCr alloy powder. The coal fly ash was produced by the Misumi Coal Thermal Power Station (Chugoku Electric Power Co., Inc.), with 80 wt% nickel and 20 wt% chromium (Fukuda Metal Foil and Powder Co., Ltd.) used as source materials. The sintering temperature in the graphite die was 1000 deg. C. X-ray diffraction patterns of the sintered coal fly ash materials indicated that mullite (3Al{sub 2}O{sub 3}{center_dot}2SiO{sub 2}) and silica (SiO{sub 2}) phases were predominant. Direct joining of coal fly ash and NiCr causes fracture at the interface. This is due to the mismatch in the thermal expansion coefficients (CTE). A crack in the FGM was observed between the two layers with a CTE difference of over 4.86x10{sup -6} K{sup -1}, while a crack in the FGM was difficult to detect when the CTE difference was less than 2.77x10{sup -6} K{sup -1}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ULTRASONIC AND RADIOGRAPHIC IMAGING OF NIOBIUM TARGET CAPSULES FOR RADIOISOTOPE PRODUCTION

In the case of proton-irradiated radioisotope production, niobium target capsules containing gallium are exposed to intense radiation, thermally induced stress, for extended periods. The structural integrity of the target capsules is of crucial importance for containing the accelerator-produced radioisotopes and target material. The capsule window should be as thin and transparent to the proton beam as possible, and preferably should not become significantly activated under proton irradiation. In addition, the material for the capsule needs to be as defect-free as possible. Niobium encapsulated gallium targets have a history of unpredictable failure under intense irradiation with 100 MeV protons. This study illustrates the utility of non-destructive testing in order to detect defects that may result in mechanical failure of the capsules during irradiation. Prior to this work, it was not known if the gallium initially wets the niobium capsule that encapsulates it, and if it does, it is not known to what degree. However, the imaging techniques used in this work show that local areas of wetting do occur. We used ultrasonic images from various lots of niobium capsule material to assess the integrity of the capsules. Digital radiography is also used to detect any voids in the gallium that will tend to cause local heating in the capsules.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser-induced radial birefringence and spin-to-orbital optical angular momentum conversion in silver-doped glasses

Samples of Ag{sup +}/Na{sup +} ion-exchanged glass that have been subject to intense laser irradiation may develop novel optical properties, as a consequence of the formation of patterns of silver nanoparticles and other structures. Here, we report the observation of a laser-induced permanent transverse birefringence, with the optical axis forming a radial pattern, as revealed by the spin-to-orbital angular momentum conversion occurring in a probe light beam. The birefringence pattern can be modeled well as resulting from thermally-induced stresses arising in the silver-doped glass during laser exposure, although the actual mechanism leading to the permanent anisotropy is probably more complex.

36 MATERIALS SCIENCE↗

A new TriBeam system for three-dimensional multimodal materials analysis

The unique capabilities of ultrashort pulse femtosecond lasers have been integrated with a focused ion beam (FIB) platform to create a new system for rapid 3D materials analysis. The femtosecond laser allows for in situ layer-by-layer material ablation with high material removal rates. The high pulse frequency (1 kHz) of ultrashort (150 fs) laser pulses can induce material ablation with virtually no thermal damage to the surrounding area, permitting high resolution imaging, as well as crystallographic and elemental analysis, without intermediate surface preparation or removal of the sample from the chamber. The TriBeam system combines the high resolution and broad detector capabilities of the DualBeam{sup TM} microscope with the high material removal rates of the femtosecond laser, allowing 3D datasets to be acquired at rates 4-6 orders of magnitude faster than 3D FIB datasets. Design features that permit coupling of laser and electron optics systems and positioning of a stage in the multiple analysis positions are discussed. Initial in situ multilayer data are presented.

36 MATERIALS SCIENCE↗

The evolution of solid density within a thermal explosion II. Dynamic proton radiography of cracking and solid consumption by burning

We report proton transmission images obtained subsequent to the laser assisted thermal ignition of a sample of PBX 9501 (a plastic bonded formulation of the explosive nitramine octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX)). We describe the laser assisted thermal ignition technique as a means to synchronize a non-linear thermal ignition event while preserving the subsequent post-ignition behavior. We have obtained dynamic proton transmission images at two spatial magnifications and viewed both the radial and transverse axis of a solid cylindrical sample encased in aluminum. Images have been obtained with 3 to 15 {mu}s temporal resolution and approximately 100 {mu}m spatial resolution at the higher magnification. We observe case expansion from very early in the experiment, until case fragmentation. We observe spatially anisotropic features in the transmission which we attribute to cracking in the solid explosive, in agreement with previous measurements conducted on two dimensional samples with optical viewing. Digital analysis of the images also reveals spatially isotropic features which we attribute to the evolution of the loss of density by burning subsequent to thermal ignition.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

New superconducting toroidal magnet system for IAXO, the international AXion observatory

Axions are hypothetical particles that were postulated to solve one of the puzzles arising in the standard model of particle physics, namely the strong CP (Charge conjugation and Parity) problem. The new International AXion Observatory (IAXO) will incorporate the most promising solar axions detector to date, which is designed to enhance the sensitivity to the axion-photon coupling by one order of magnitude beyond the limits of the current state-of-the-art detector, the CERN Axion Solar Telescope (CAST). The IAXO detector relies on a high-magnetic field distributed over a very large volume to convert solar axions into X-ray photons. Inspired by the successful realization of the ATLAS barrel and end-cap toroids, a very large superconducting toroid is currently designed at CERN to provide the required magnetic field. This toroid will comprise eight, one meter wide and twenty one meter long, racetrack coils. The system is sized 5.2 m in diameter and 25 m in length. Its peak magnetic field is 5.4 T with a stored energy of 500 MJ. The magnetic field optimization process to arrive at maximum detector yield is described. In addition, materials selection and their structure and sizing has been determined by force and stress calculations. Thermal loads are estimated to size the necessary cryogenic power and the concept of a forced flow supercritical helium based cryogenic system is given. A quench simulation confirmed the quench protection scheme.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental study of thermodynamics propagation fatigue crack in metals

This work is devoted to the development of an experimental method for studying the energy balance during cyclic deformation and fracture. The studies were conducted on 304 stainless steel AISE samples. The investigation of the fatigue crack propagation was carried out on flat samples with stress concentrators. The stress concentrator was three central holes. The heat flux sensor was developed based on the Seebeck effect. This sensor was used for measuring the heat dissipation power in the examined samples during the fatigue tests. The measurements showed that the rate of fatigue crack growth depends on the heat flux at the crack tip and there are two propagation mode of fatigue crack with different link between the propagation mode and heat flux from crack tip.

36 MATERIALS SCIENCE↗

Microscopic molecular dynamics characterization of the second-order non-Navier-Fourier constitutive laws in the Poiseuille gas flow

The second-order non-Navier-Fourier constitutive laws, expressed in a compact algebraic mathematical form, were validated for the force-driven Poiseuille gas flow by the deterministic atomic-level microscopic molecular dynamics (MD). Emphasis is placed on how completely different methods (a second-order continuum macroscopic theory based on the kinetic Boltzmann equation, the probabilistic mesoscopic direct simulation Monte Carlo, and, in particular, the deterministic microscopic MD) describe the non-classical physics, and whether the second-order non-Navier-Fourier constitutive laws derived from the continuum theory can be validated using MD solutions for the viscous stress and heat flux calculated directly from the molecular data using the statistical method. Peculiar behaviors (non-uniform tangent pressure profile and exotic instantaneous heat conduction from cold to hot [R. S. Myong, “A full analytical solution for the force-driven compressible Poiseuille gas flow based on a nonlinear coupled constitutive relation,” Phys. Fluids 23(1), 012002 (2011)]) were re-examined using atomic-level MD results. It was shown that all three results were in strong qualitative agreement with each other, implying that the second-order non-Navier-Fourier laws are indeed physically legitimate in the transition regime. Furthermore, it was shown that the non-Navier-Fourier constitutive laws are essential for describing non-zero normal stress and tangential heat flux, while the classical and non-classical laws remain similar for shear stress and normal heat flux.

42 ENGINEERING↗

Processing-induced strain glass states in a Ni 49.5 Ti 50.5 shape memory alloy

Shape memory alloys (SMAs) represent a revolutionary and innovative class of active materials which can provide potential solutions to many of today's engineering problems due to their compact form, high energy densities, and multifunctional capabilities. While many applications in the biomedical, aerospace, and automotive industries have already been investigated and realized for Nickel-Titanium (NiTi) based SMAs, the effects of restricting the ferroelastic transformation to nanosized domains is not well understood and the potential remains untapped. In binary NiTi, the martensitic transformation, which is characterized by long-range strain ordering (LRO), can be replaced with a strain glass transition, which consists of an LRO parent phase and a short-range strain ordered glassy phase. Such alloys have been named strain glass alloys (SGAs) due to the fact that they exhibit a glassy state which results from compositionally- or processing-induced strain. While SGAs do not exhibit a stress-free, temperature-induced macroscopic phase change, they still exhibit the strain recovery and actuation capabilities intrinsic to near equiatomic NiTi and other SMAs. It has been shown in the available literature that certain compositions, for example 51.5 at. % Nickel in binary NiTi, can create a strain glass; however, these compositionally-induced NiTi SGAs generally have transformation temperatures below 173 K and this will restrict their practical applications. In the present study, a new method for producing a strain glass phase in Ti-rich NiTi through sufficient plastic deformation via cold work is reported; the resulting SGA exhibits a temperature-induced ferroelastic recovery above room temperature. Additionally, the macroscopic actuation capabilities are improved when compared to both compositionally-induced SGAs and the base material due to the increased functional stresses of the SGA. To better understand the transition from an SMA to an SGA, Ni49.5Ti50.5 (at. %) rods were processed to several degrees of cold work and characterized via scanning and transmission electron microscopy, differential scanning calorimetry, thermomechanical testing, and synchrotron radiation x-ray diffraction. The experimental results indicate that twin size decreases with additional cold work and, around 45% thickness reduction, stress-free thermal cycling no longer results in a measurable phase transformation; however, mechanically-induced phase transformation is still possible, where fully recoverable strains in these SGAs were observed to be above 4.5% when loaded at room temperature and recovered at 150 °C.

36 MATERIALS SCIENCE↗

Significant enhancement of magnetocaloric effect in a NiMnCuGa Heusler alloy through textural modification

Magnetocaloric materials are of increasing interest to bring magnetic refrigeration to everyday households and drastically impact the energy demands for temperature control devices. In this work, a polycrystalline Heusler alloy of composition Ni2Mn0.76Cu0.24Ga with coinciding structural and magnetic transformation temperatures was subjected to compressive stress assisted thermal cycling (SATC) to enhance the magnetic properties by inducing a preferred orientation in the martensite. Isofield magnetization measurements showed a sharpening of the transformation between ferromagnetic martensite and paramagnetic austenite due to SATC. In isothermal magnetization measurements, SATC was seen to increase the magnetostructural coupling. With a 2 T applied magnetic field, the magnetocaloric effect (MCE) increased from ∼10 to ∼25 J/kg K and the refrigeration capacity (RC) almost doubled due to SATC. Heat capacity measurements were largely unaffected by SATC. The change in adiabatic temperature was estimated by using Cp and change in magnetic entropy (ΔSM) calculations. SATC was seen to increase ΔTad from ∼1.2 K to 2 K for an applied magnetic field of 2 T. Neutron diffraction measurements revealed highly textured martensite in the as received state that rotated to a more ideal preferred orientation after SATC that enhanced the magnetostructural transformation; and thus, improving the MCE and ΔTad.

McLeod, M. V. (ORCID:0000000329883516)↗

Structural Analysis of Induction Machine and Switched Reluctance Machine

Presented is a comprehensive analysis of structural performance of Induction Machine (IM) and Switched Reluctance Machine (SRM) rotors under different operational conditions. Electric machines are susceptible to forces of diverse origins. In addition to traditionally considered magnetic and centrifugal forces, this article discusses independent and inclusive effects of thermal expansion and shaft attachment techniques on structural integrity of the machines. A comparative analysis of structural performance of IMs and SRMs has also been performed, under a range of scenarios, to facilitate application specific machine selection from a structural perspective.

42 ENGINEERING↗

Review of Recent Progress in Plasma-Facing Material Joints and Composites in the FRONTIER U.S.-Japan Collaboration

The plasma-facing components (PFCs) of future fusion reactors will have intricate structures and require multiple materials because no one material can simultaneously satisfy all the requirements of the component. The dissimilar material joints in PFCs must withstand extreme thermal and stress gradients under neutron irradiation. The Fusion Research Oriented to Neutron Irradiation and Tritium Behavior at Material Interfaces (FRONTIER) U.S.-Japan collaboration seeks to explore and explain the behavior of internal solid interfaces in PFCs under neutron irradiation. The first step of the collaboration was to identify the leading PFCs that should be studied further and prepare them for the next step, which will include neutron irradiation. Different strategies for material development are being pursued worldwide to produce robust PFCs. Here, in this work, an overview is presented of some of the most promising materials in the areas of copper alloys, tungsten-copper composites, tungsten-steel composites, additively manufactured tungsten, particle-reinforced tungsten, and tungsten and SiC fiber composites. Each material’s fabrication and benefits are described, and some discussion of remaining questions is given.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗