Search NASA⌕ Search

SEARCH · Search NASA

Results for “X ray diffraction analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Microstructural, optical and electrical investigations of Sb-SnO{sub 2} thin films deposited by spray pyrolysis

Highlights: • We controlled structural, morphological, electrical, optical and physical (such as band gap energy) properties by altering the Sb doping concentration. • Variation in bandgap with Sb concentration is in agreement with the Burstein–Moss hypothesis and this hypothesis was further confirmed by plotting E{sub g} vs n{sup 2/3}. • The resistivity and mobility are in the range of 1.512–6.624 × 10{sup −3} Ω cm and 9.75–22.96 cm{sup 2} V{sup −1} s{sup −1}. The e-density lies between 4.11 × 10{sup 19} and 4.24 × 10{sup 20} cm{sup −3}. • We observed that Sb substitution in SnO{sub 2} lattice decreases the crystallite size and the possible reason for this is the creation of Sb monolayer on the surface of SnO{sub 2} crystallite. - Abstract: The structural, optical and electrical properties of spray deposited antimony (Sb) doped tin oxide (SnO{sub 2}) thin films, prepared from SnCl{sub 4} precursor, have been studied as a function of antimony doping concentration. The doping concentration was varied from 0 to 1.5 wt.% of Sb. The analysis of X-ray diffraction patterns revealed that the as deposited doped and undoped tin oxide thin films are pure crystalline tetragonal rutile phase of tin oxide which belongs to the space group P4{sub 2}/mnm (number 136). The surface morphological examination with field emission scanning electron microscopy (FESEM) revealed the fact that the grains are closely packed and pores/voids between the grains are very few. The resistivity (ρ) and mobility (μ) are in the range of 1.512 × 10{sup −3}–6.624 × 10{sup −3} Ω cm and 9.75–22.96 cm{sup 2} V{sup −1} s{sup −1}. The electron density lies between 4.11 × 10{sup 19} and 4.24 × 10{sup 20} cm{sup −3}. A thorough electrical investigation reveals that the film's resistivity depends on carrier concentration. It is found that ionized impurity scattering is the dominant mechanism, which limits the mobility of the carriers. The transmittance spectra for as-deposited films were recorded in the wavelength range of 200–1000 nm. The transmittance of the films was observed to increase from 57% to 68% (at 800 nm) on initial addition of Sb (up to [Sb]/[Sn] = 0.5 wt.%) and then it is decreased for higher level of antimony doping ([Sb]/[Sn] >0.5 wt.%)

36 MATERIALS SCIENCE↗

Frequency upconversion in Er{sup 3+} doped Y{sub 2}O{sub 3} nanophosphor:Yb{sup 3+} sensitization and tailoring effect of Li{sup +} ion

Graphical abstract: - Highlights: • Dual mode luminescence behavior of Er{sup 3+} in oxide phosphor. • Sensitization through Yb{sup 3+} codoping, and tailoring effect of lithium ion. • Phosphors for lighting and display applications. - Abstract: Er{sup 3+} doped Y{sub 2}O{sub 3} nanophosphor has been synthesized using solution combustion technique and further characterized for structure and optical properties. Optical properties of Er{sup 3+} ion have been studied both through frequency upconversion (UC) as well as through fluorescence (excitation, emission, and CIE co-ordinate analysis) processes. Further to enhance the UC emission of Er{sup 3+} ions, a two step process has been used. In the first step, Yb{sup 3+} ion has been co-doped, which acts as the sensitizer for Er{sup 3+} through energy transfer process. In the second step, different concentrations of Li{sup +} ions have been co-doped in the Er{sup 3+}/Yb{sup 3+}:Y{sub 2}O{sub 3} system. Fourier transform infrared analysis, and X-ray diffraction (XRD) followed by Le-Bail refinement of the XRD data reveal that the co-doping of Li{sup +} ion decreases unit cell parameter, increases the particle size, and removes the quenching centers (like OH, NO{sub x}, etc.), which all together causes a significant enhancement in UC emission. Optimum UC luminescence is attained for 5 mol% Li{sup +} doping concentration beyond which a quenching in UC emission is observed. This combined approach, i.e. Yb{sup 3+} sensitization and Li{sup +} ion tailoring simultaneously enhances the UC emission intensity of Er{sup 3+} several times in yttria matrix effectively. The strategy can be generalized in other hosts also which could help in the development of efficient photonic materials for lighting and display devices.

36 MATERIALS SCIENCE↗

Investigation into the optoelectrical properties of tungsten oxide thin films annealed in an oxygen air

Tungsten oxide (WO{sub x}) thin film have been deposited onto glass substrates using the thermal vacuum evaporation technique, monitored by an annealing process in a variable oxygen atmosphere. Analysis by X-ray diffraction and Raman spectroscopy showed the structural changes from orthorhombic to monoclinic which depend on the annealing temperature and the oxygen content. AFM study shows that the increase of oxygen content leads to a decrease of the root-mean-square from 94.64 nm to 2 nm. Ellipsometric measurements have been used to evaluate the optical constants. Further, it is found that when the oxygen content increases, the band gap of the annealed layer varies from 3.01 eV to 3.52 eV by against, the Urbach energy decreases. The AC conductivity plot showed a universal power law according to the Jonscher model. Moreover, at high frequency semiconductor-to-metallic behavior has been observed. Finally, the effect of annealing in oxygen atmosphere on their structural modifications, morphological, optical properties and electrical conductivity are reported.

36 MATERIALS SCIENCE↗

Effects of different annealing atmospheres on the properties of cadmium sulfide thin films

Graphical abstract: The effects of different annealing atmospheres (air and sulfur) on the structural, morphological and optical properties of CdS thin films were studied at three different pH values. - Highlights: • Compactness and smoothness of the films were enhanced after sulfur annealing. • Micro-strain values of some films were improved after sulfur annealing. • Dislocation density values of some films were improved after sulfur annealing. • Band gap values of the films were improved after sulfur annealing. - Abstract: Cadmium sulfide (CdS) thin films were prepared on glass substrates by using chemical bath deposition (CBD) technique. The effects of different annealing atmospheres (air and sulfur) on the structural, morphological and optical properties of CdS thin films were studied at three different pH values. Compactness and smoothness of the films (especially for pH 10.5 and 11) enhanced after sulfur annealing. pH value of the precursor solution remarkably affected the roughness, uniformity and particle sizes of the films. Based on the analysis of X-ray diffraction (XRD) patterns of the films, micro-strain and dislocation density values of the sulfur-annealed films (pH 10.5 and 11) were found to be lower than those of air-annealed films. Air-annealed films (pH 10.5, 11 and 11.5) exhibited higher transmittance than sulfur-annealed films in the wavelength region of 550–800 nm. Optical band gap values of the films were found between 2.31 eV and 2.36 eV.

36 MATERIALS SCIENCE↗

One-pot synthesis of Ni/Ni{sub 3}C/Ni{sub 3}N nanocomposite: Structure, growth mechanism and magnetic properties

Graphical abstract: Ni/Ni{sub 3}C/Ni{sub 3}N nanocomposites were synthesized by a one-pot solution chemistry method at lower temperature of 200 °C. The formation mechanism, magnetic properties and textural structures of Ni/Ni{sub 3}C/Ni{sub 3}N nanocomposite were investigated. - Highlights: • Ni/Ni{sub 3}C/Ni{sub 3}N nanocomposites were synthesized by a one-pot solution chemistry method at lower temperature of 200 °C. • Ni{sub 3}N nanomaterials were generally obtained by two steps, here we use one-step for preparation of Ni{sub 3}N nanomaterials. • The formation mechanism, magnetic properties and textural structures of Ni/Ni{sub 3}C/Ni{sub 3}N nanocomposite were investigated. - Abstract: A one-pot solvothermal synthesis of Ni/Ni{sub 3}C/Ni{sub 3}N nanocomposite, using hydrazine hydrate (N{sub 2}H{sub 4}) as reducing agent and tetraethylene glycol (TEG) as solvent, is reported. The contents of Ni{sub 3}C and Ni{sub 3}N decrease with increasing the amount of N{sub 2}H{sub 4}. The magnetic hysteresis loops at room temperature of the Ni/Ni{sub 3}C/Ni{sub 3}N display ferromagnetic characteristics. Saturation magnetization increases gradually with increasing Ni content of the Ni/Ni{sub 3}C/Ni{sub 3}N. Growth mechanism is discussed based on the characterization results of X-ray diffraction (XRD), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TG), nitrogen adsorption desorption, and elemental analysis. Furthermore, Ni{sub 3}N was fabricated by such a solution chemistry method at low-temperature of 200 °C.

36 MATERIALS SCIENCE↗

Photocatalytic study on SrBi2B2O7 (SrO-Bi2O3-B2O3) transparent glass ceramics

Highlights: • SrO-Bi{sub 2}O{sub 3}-B{sub 2}O{sub 3} transparent glass ceramic was fabricated via melt-quenching. • XRD and SEM revealed nucleation of SrBi{sub 2}B{sub 2}O{sub 7} nanocrystals over glass surface. • SrBi{sub 2}B{sub 2}O{sub 7} nanocrystals were found responsible for photocatalytic activity. • Rz ink test was performed to test self-cleaning ability of glass. • Digital photographic method was opted to view self-cleaning of glass. - Abstract: SrO-Bi{sub 2}O{sub 3}-B{sub 2}O{sub 3} transparent glass ceramic was fabricated via conventional melt-quenching technique. Structural analysis like X-ray diffraction, Raman and Fourier transform infrared spectroscopies were performed to confirm SBBO glass ceramic formation. As-quenched glass samples exhibited X-ray diffraction peaks corresponding to SrBi{sub 2}B{sub 2}O{sub 7} which were further confirmed through Field Emission Scanning Electron Microscope. UV–vis transmission spectra revealed 60%–80% transparency in 500–800 nm spectral range. Absorption study revealed direct bandgap of 2.58 eV. Resazurin (Rz) ink was used as an indicator to monitor photocatalytic activity for self-cleaning purposes. Digital photographic method was performed to examine photoreduction of Rz ink. Further, the pseudo-first order kinetics was istimated for Methylene blue (MB) degradation. Nucleation of nanoparticles of SrBi{sub 2}B{sub 2}O{sub 7} over glass surface were found responsible for photocatalytic activity. Contact angle with water droplet for SBBO glass ceramic was 63.43°. Reduced Young’s modulus (E{sub r}) and Vickers hardness (H{sub v}) were found 59.9 GPa and 5.01 GPa, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Biosynthesis of the palladium/sodium borosilicate nanocomposite using Euphorbia milii extract and evaluation of its catalytic activity in the reduction of chromium(VI), nitro compounds and organic dyes

Highlights: • Green synthesis of Pd/sodium borosilicate nanocomposite using Euphorbia milii aqueous extract. • Characterization of catalyst by FT-IR, XRD, FESEM, EDS, TEM and elemental mapping. • Catalytic reduction of Cr(VI), 2,4-DNPH, 4-NP, CR, MO and MB by Pd/sodium borosilicate nanocomposite. - Abstract: For the first time, a green method is developed to prepare palladium/sodium borosilicate nanocomposite by using aqueous extract of the leaves of Euphorbia milii as bioreducing and stabilizing agent. The immobilization of Pd NPs on the surface of the sodium borosilicate glass was established by several instrumental analysis including X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), EDS elemental dot maps and transmission electron microscopy (TEM). The green synthesized nanocatalyst exhibited excellent performance in the reduction of the chromium (VI) (Cr(VI)), nitro compounds such as 2,4-dinitrophenylhydrazine (2,4-DNPH) and 4-nitrophenol (4-NP) and some organic dyes containing Congo red (CR), Methyl orange (MO), and Methylene blue (MB). The biosynthesized heterogeneous catalyst was easily recovered and reused at least in 5 consecutive reactions with no losing of its performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enantioselective catalysts based on metal-organic framework-supported nucleotides

Adenosine triphosphate (ATP) and other nucleotides can be irreversibly bound to the metal-organic framework (MOF) MIL-101(Cr). Analysis of X-ray diffraction data suggests that the location of the adsorbed ATP molecule is in proximity of the Cr 3 clusters. Solid-state NMR and DFT calculations indicate that ATP is bound to MIL-101(Cr) through linkages of the terminal phosphate group with Cr(III) of the framework. In the presence of Cu(II) ions, the MOF-supported nucleotides can function as stable and reusable enantioselective heterogeneous catalysts for reactions like Diels-Alder and Michael addition. In conclusion, compared to the corresponding homogeneous nucleotide-based artificial metalloenzymes (ArMs), the MOF-supported nucleotide-based ArMs exhibit significantly enhanced activity and selectivity in certain cases, demonstrating their potential as a new class of enantioselective heterogeneous catalysts.

36 MATERIALS SCIENCE↗

Room temperature polar and weak-ferromagnetic oxide with low dielectric loss

Single-phase materials that are simultaneously ferroelectric and ferromagnetic at room temperature are promising for devices such as non-volatile random-access memory. Perovskite BiFeO 3 which crystallizes in the polar rhombohedral structure (R3c) is ferroelectric and antiferromagnetic at room temperature. Here, we report a family of perovskite oxides in the BiFeO 3 – Bi 2/3 TiO 3 – ATiO 3 (where A 2+ is divalent alkaline earth metal ions e.g., Ca 2+ , Sr 2+ , Ba 2+ ) ternary phase diagram that is polar as well as weak ferromagnetic above room temperature. The composition (Bi 0.9167 A 0.075 )(Fe 0.9 Ti 0.1 )O 3 crystallizes in the polar rhombohedral structure space group R3c as corroborated by powder X-ray and neutron diffraction analysis. The nearly pure A-site perovskite possesses a long-range magnetic ordering above room temperature. Finally, these perovskites show a low dielectric loss, and the electrical response is dominated by grain contributions below 723 K.

42 ENGINEERING↗

Synthesis strategies toward improved ordering of [MnO 6 ] octahedra in tunnel structured 2 × 3 and 2 × 4 MnO 2

Improved homogeneity of tunnel size in Na-stabilized 2 × 3 and 2 × 4 MnO 2 structures was achieved by identifying and controlling critical synthesis parameters. 2 × 3 and 2 × 4 MnO 2 tunnel manganese oxide nanowires were obtained by hydrothermal treatment of Na-birnessite, a layered manganese oxide that undergoes a layer-to-tunnel transition under high pressure and temperature. Herein, the improved ordering of [MnO 6 ] octahedra is revealed via a combined analysis of X-ray diffraction patterns and scanning transmission electron microscopy images. Furthermore, we show that crystallinity of the Na-birnessite precursor and the chemical composition of the system during hydrothermal treatment are crucial for achieving the targeted size of the structural tunnels with adequate uniformity.

36 MATERIALS SCIENCE↗

Investigation of La x Sr 1-x Co y M 1-y O 3-δ (M = Mn Fe) perovskite materials as thermochemical energy storage media

Materials in the La x Sr 1–x Co y Mn 1–y O 3–δ (LSCM) and La x Sr 1–x Co y Fe 1–y O 3–δ (LSCF) families are candidates for high-temperature thermochemical energy storage due to their facility for cyclic endothermic reduction and exothermic oxidation. A set of 16 LSCM and 21 LSCF compositions were synthesized by a modified Pechini method and characterized by powder X-ray diffraction and thermogravimetric analysis. All materials were found to be various symmetries of the perovskite phase. LSCM was indexed as tetragonal, cubic, rhombohedral, or orthorhombic as a function of increased lanthanum content. For LSCF, compositions containing low lanthanum content were indexed as cubic while materials with high lanthanum content were indexed as rhombohedral. An initial screening of redox activity was completed by thermogravimetric analysis for each composition. The top three compositions with the greatest recoverable redox capacity for each family were further characterized in equilibrium thermogravimetric experiments over a range of temperatures and oxygen partial pressures. As a result, these equilibrium experiments allowed the extraction of thermodynamic parameters for LSCM and LSCF compositions operated in thermochemical energy storage conditions.

14 SOLAR ENERGY↗

Growth Mode Transition in Complex Oxide Heteroepitaxy: Atomically Resolved Studies

Here we performed investigations of the atomic-scale surface structure of epitaxial La 5/8 Ca 3/8 MnO 3 thin films as a model system dependent on growth conditions in pulsed laser deposition with emphasis on film growth kinetics. Postdeposition in situ scanning tunneling microscopy was combined with in operando reflective high-energy electron diffraction to monitor the film growth and ex situ X-ray diffraction for structural analysis. We find a correlation between the out-of-plane lattice parameter and both adspecies mobility and height of the Ehrlich–Schwoebel barrier, with mobility of adatoms greater over the cationically stoichiometric terminations. We find that the data suggest that the out-of-plane lattice parameter is dependent on the mechanism of epitaxial strain relaxation, which is controlled by the oxidative power of the deposition environment.

36 MATERIALS SCIENCE↗

An Aluminum-Based Metal–Organic Cage for Cesium Capture

Metal–organic cages are a class of supramolecular structures that often require the careful selection of organic linkers and metal nodes. Of this class, few examples of metal–organic cages exist where the nodes are composed of main group metals. Herein, we have prepared an aluminum-based metal–organic cage, H 8 [Al 8 (pdc) 8 (OAc) 8 O 4 ] (Al-pdc-AA), using inexpensive and commercially available materials. The cage formation was achieved via solvothermal self-assembly of solvated aluminum and pyridine-dicarboxylic linkers in the presence of a capping agent, acetic acid. The obtained supramolecular structure was characterized by single-crystal X-ray diffraction (SCXRD), thermogravimetric analysis, and NMR spectroscopy. Based on crystal structure and computational analyses, the cage has a 3.7 Å diameter electron-rich cavity suitable for the binding of cations such as cesium (ionic radius of 1.69 Å). Here, the host–guest interactions were probed with 1 H and 133 Cs NMR spectroscopy in DMSO, where at low concentrations, Cs + binds to Al-pdc-AA in a 1:1 ratio. The binding site was identified from the crystal structure of CsH 7 [Al 8 (pdc) 8 (OAc) 8 O 4 ] (Cs + Al-pdc-AA), and a binding affinity of ~10 6 –10 7 M –1 was determined from NMR titration experiments. The Al-pdc-AA showed improved selectivity for cesium binding over alkali metal cations (Cs + > Rb + > K + >> Na + ~ Li + ). Collectively, the study reports a novel aluminum cage that can serve as a promising host for efficient and selective cesium removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Octafluorodirhenate(III) Revisited: Solid-State Preparation, Characterization, and Multiconfigurational Quantum Chemical Calculations

A simple method for the high-yield preparation of (NH 4 ) 2 [Re 2 F 8 ]· 2H 2 O has been developed that involves the reaction of (n-Bu 4 N)2[Re 2 Cl 8 ] with molten ammonium bifluoride (NH 4 HF 2 ). Using this method, the new salt [NH 4 ] 2 [Re 2 F 8 ]·2H 2 O was prepared in ~90% yield. The product was characterized in solution by ultraviolet-visible light (UV-vis) and 19 F nuclear magnetic resonance (19F NMR) spectroscopies and in the solid-state by elemental analysis, powder X-ray diffraction (XRD), and infrared (IR) spectroscopy. Multiconfigurational CASSCF/CASPT2 quantum chemical calculations were performed to investigate the molecular and electronic structure, as well as the electronic absorption spectrum of the [Re 2 F 8 ] 2- anion. The metal-metal bonding in the Re 2 6+ unit was quantified in terms of effective bond order (EBO) and compared to that of its [Re 2 Cl 8 ] 2- and [Re 2 Br 8 ] 2- analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating the Role of Silver Oxidation State on the Thermodynamic Interactions between Xenon and Silver-Functionalized Zeolites

The molecular level understanding of the strong adsorption of Xe to silver-modified zeolites remains elusive. Here, we probe the effect of silver oxidation state on the thermodynamics of Xe sorption in silver-functionalized zeolites by measuring the enthalpies of adsorption after various treatments using inverse gas chromatography (IGC). The enthalpy of adsorption was measured for silver-functionalized chabazites (AgCHA) before and after hydrogen reduction and subsequent reoxidation. The sorption enthalpy (ΔH) for AgCHA was 35.2 kJ/mol, which decreased to 25.8 kJ/mol with hydrogen reduction. After reoxidation (O 2 -AgCHA), 95% of the binding strength was restored. Hydrogen reduction of the base chabazite (CHA) did not influence Xe adsorption. Henry’s law constant for Xe adsorption increased in the order AgCHA > O 2 -AgCHA > H 2 -AgCHA > CHA. A decrease in enthalpy and Henry’s constant with silver reduction and increase with reoxidation suggest that ionic silver is playing a role in Xe binding. The effect of reduction and reoxidation on the zeolite microstructure was analyzed using surface area analysis, powder X-ray diffraction (p-XRD), scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), and X-ray photoelectron spectroscopy (XPS). Finally, these results lay the groundwork for better material design of strong noble gas adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous Crystalline Niobium Oxide with a High Surface Area: A Solid Acid Catalyst for Alkyne Hydration

A mesoporous crystalline niobium oxide with tunable pore sizes was synthesized via the sol–gel-based inverse micelle method. The material shows a surface area of 127 m 2 /g, which is the highest surface area reported so far for crystalline niobium oxide synthesized by soft template methods. The material also has a monomodal pore size distribution with an average pore diameter of 5.6 nm. A comprehensive characterization of niobium oxide was performed using powder X-ray diffraction, Brunauer–Emmett–Teller, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, UV–vis, and X-ray photoelectron spectroscopy. The material acts as an environmentally friendly, solid acid catalyst toward hydration of alkynes under with excellent catalytic activity (99% conversion, 99% selectivity, and 4.39 h –1 TOF). Brønsted acid sites present in the catalyst were found to be responsible for the high catalytic activity. Lastly, the catalyst was reusable up to five cycles without a significant loss of the activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mineralogical characterization of Sasol feed coals and corresponding gasification ash constituents

Feed coal and coarse ash particles (heated rock fragments and clinkers), produced from Sasol-Lurgi gasifier tests under different operating conditions, have been characterized by quantitative X-ray diffraction, electron microprobe analysis, and associated chemical techniques, as a basis for better understanding of the relations between the mineralogical and physical properties of the ash particles. Crystalline phases in the ashes include quartz particles inherited directly from the feed coal, as well as anorthite, mullite, and diopside, derived from solid-state reactions or crystallization of a silicate melt during the gasification process. Glass, cooled from the melt, is also abundant in the ash materials. The abundance of large particles of hard minerals in the coal or the ash, such as quartz, anorthite, pyrite, and diopside, has been correlated with a laboratory-determined abrasion index and may contribute significantly to wear on mechanical equipment during coal- or ash-handling operations. 21 refs., 3 figs., 9 tabs.

01 COAL, LIGNITE, AND PEAT↗

Enabling Ethanol Dehydrogenation Catalysis by Postsynthetic Anion Exchange of Triazolate-Based Metal–Organic Frameworks

Materials containing soft, polarizable elements are expanding the boundaries of catalytic properties, offering unique electronic communication and stability characteristics compared with their harder counterparts due to the enhanced covalent nature of metal–ligand interactions. However, integrating soft components like sulfur into metal–organic frameworks (MOFs) for catalytic applications remains a largely underexplored challenge. Here, we report the synthesis of a family of triazole-based MOFs and expand upon established postsynthetic anion exchange methods to incorporate sterically encumbered polarizable elements, such as alkyl thiolates. Single-crystal X-ray diffraction, coupled with elemental analysis, confirms the successful anion exchange within M 2 X 2 BBTA (M = Co, Ni; X = μ-Cl, μ-OH, μ-SH, μ-SMe, μ-SEt; H 2 BBTA = 1H,5H-benzo(1,2-d:4,5-d′)bistriazole). We found that the anion identity significantly impacts the catalytic activity and selectivity of the MOFs, especially in nonoxidative ethanol dehydrogenation. Temperature-programmed experiments indicated that the metal single sites act as catalytically active sites below 250 °C. This work not only expands the synthetic toolbox for incorporating polarizable components into MOFs but also provides critical insights into their catalytic potential.

Anions↗