Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

SPUTTERED THIN FILMS FOR VERY HIGH POWER, EFFICIENT, AND LOW-COST COMMERCIAL SOFCS

The aim of this project was to leverage the low area specific resistance (ASR) of Redox’s GDC electrolyte-based cell architecture and increase solid oxide fuel cell (SOFC) efficiency (i.e., open circuit voltage, or OCV) without significantly increasing cell resistance. The key to achieving the increased SOFC efficiency is the introduction of a thin sputtered yttria stabilized zirconia (YSZ) electron-blocking layer and a thin sputtered gadolinia doped ceria (GDC) barrier layer on top of the half-cell substrate (i.e., anode and GDC electrolyte). A key initial effort of the project was to improve the quality of the half-cell substrate surface so that any remaining defects were significantly smaller than the desired film thickness. During lab-scale trials, we had to overcome challenges with film cracking during post-sputtering treatments (e.g., thermal anneals) as well as damage to the sputtering targets. After the initial lab-scale trials, the focus shifted toward the use of commercial scale sputtering equipment with a sputtering equipment manufacturer in the microelectronics industry. Using the commercial sputtering equipment, we deposited films with different variations of power, PO2, sputtering time, platen speed, etc. We then determined the combinations of sputtering conditions and post-sputtering treatments that yielded high-quality films without cracks or other significant defects. While thin films were deposited on cells as large as 10 cm by 10 cm, the processing was optimized using 4 cm by 4 cm cells. Cell performance was evaluated in stainless-steel test fixtures between 500 °C and 700 °C with hydrogen fuel fed to the anode and air fed to the cathode. Extensive studies allowed us to determine that modified cathode and cathode contact firing processes were required to achieve theoretical OCV. Moreover, use of the new firing processes resulted in the need for a modified cathode contact to achieve a low ASR. In summary, the project demonstrated the performance of high OCV (1.13 V at 650 °C) from sputtered layers and a low ASR (~0.25 Ohms-cm2 at 650 °C) resulting from a modification of cathode/contact processing and the introduction of alternative contact layers that are sufficient to yield a Gen-1 cell with a maximum power density of approximately 1.2 W/cm2. At an operating voltage of 0.74 V, this would yield a cell power density of ~1.1 W/cm2. While not utilized in this project, a Redox Gen-2 cell has a catalyst-infiltrated porous anode that reduces the ASR by more than 50% from that of the Gen-1 cells used in this project. Therefore, if the sputtered YSZ electron-blocking layer and GDC barrier layer are added to a Gen-2 half cell with a similar increase in OCV to the theoretical value of ~1.13 V at 650 °C, and if the same improvement in ASR (from that demonstrated in this project) is achieved when using the Gen-2 half-cell architecture as a sputtered cell substrate, then the power density at 0.74 Vop could be as high as ~2.6 W/cm2. The impact of such power density gains, while still maintaining high cell efficiency, and thus high system efficiency, is a dramatic decrease in system cost because the stack represents ~30-40% of the SOFC system cost.

01 COAL, LIGNITE, AND PEAT↗

Boreal lakes moderate seasonal and diurnal temperature variation and perturb atmospheric circulation: Analyses in the Community Earth System Model 1 (CESM1)

We used a lake thermal physics model recently coupled into the Community Earth System Model 1 (CESM1) to study the effects of lake distribution in present and future climate. Under present climate, correcting the large underestimation of lake area in CESM1 (denoted CCSM4 in the configuration used here) caused 1 °C spring decreases and fall increases in surface air temperature throughout large areas of Canada and the US. Simulated summer surface diurnal air temperature range decreased by up to 4 °C, reducing CCSM4 biases. These changes were much larger than those resulting from prescribed lake disappearance in some present-day permafrost regions under doubled-CO 2 conditions. Correcting the underestimation of lake area in present climate caused widespread high-latitude summer cooling at 850 hPa. Significant remote changes included decreases in the strength of fall Southern Ocean westerlies. We found significantly different winter responses when separately analysing 45-yr subperiods, indicating that relatively long simulations are required to discern the impacts of surface changes on remote conditions. We also investigated the surface forcing of lakes using idealised aqua-planet experiments which showed that surface changes of 2 °C in the Northern Hemisphere extra-tropics could cause substantial changes in precipitation and winds in the tropics and Southern Hemisphere. Shifts in the Inter-Tropical Convergence Zone were opposite in sign to those predicted by some previous studies. Zonal mean circulation changes were consistent in character but much larger than those occurring in the lake distribution experiments, due to the larger magnitude and more uniform surface forcing in the idealised aqua-planet experiments.

54 ENVIRONMENTAL SCIENCES↗

VOLTTRON-Based System for Providing Ancillary Services with Residential Building Loads

Ancillary services entail controlled modulation of building equipment to maintain a stable balance of generation and load in the power system. Ancillary services include frequency regulation and contingency reserves, whose acting time ranges from several seconds to several minutes. Many pilot studies have been implemented to use industrial loads to provide ancillary services, and some have explored services from commercial building loads or electric vehicle charging loads. Residential loads, such as space conditioning and water heating, represent a largely untapped resource for providing ancillary services. The residential building sector accounts for a significant fraction of the total electricity use in the United States. Many loads in residential buildings are flexible and could potentially be curtailed or shifted at the request of the grid. However, there are many barriers that prevent residential loads being widely used for ancillary services. One of the major technical barriers is the lack of communication capabilities between end-use devices and the grid. End-use devices need to be able to receive the automatic generation control (AGC) signal from the grid operator and supply certain types of telemetry to verify response. With the advance of consumer electronics, communication-enabled, or 'connected,' residential equipment has emerged to overcome the communication barrier. However, these end-use devices have introduced a new interoperability challenge due to the existence of numerous standards and communication protocols among different end devices. In this paper, we present a VOLTTRON-based system that overcomes these technical challenges and provides ancillary services with residential loads. VOLTTRON is an open-source control and sensing platform for building energy management, facilitating interoperability solutions for end devices. We have developed drivers to communicate and control different types of end devices through standard-based interfaces, manufacturer-provided application programming interfaces, and proprietary communication interfaces. We document the ability to manage nine appliances, using four different standards or proprietary communication methods. A hardware-in-the-loop test was performed in a laboratory environment where the loads of a laboratory home and a large number of simulated homes are controlled by an aggregator. Upon receipt of an AGC signal, the VOLTTRON home energy management system (HEMS) of the laboratory home adjusts the end-device controls based on the comfort criteria set by the end users and sends telemetry to the aggregator to verify response. The aggregator then sends the AGC signal to other simulated homes in attempts to match the utility request as closely as possible. Frequency regulation is generally considered a higher value service than other ancillary services but it is also more challenging due to the constraint of short response time. A frequency regulation use case has been implemented with the regulation signals sent every 10 seconds. Experimental results indicate that the VOLTTRON-controlled residential loads are able to be controlled with sufficient fidelity to enable an aggregator to meet frequency regulation requirements. Future work is warranted, such as understanding the impact of this type of control on equipment life, and market requirements needed to open up residential loads to ancillary service aggregators.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Experimental Approaches for Solution X-Ray Scattering And Fiber Diffraction

X-ray scattering and diffraction from non-crystalline systems have gained renewed interest in recent years, as focus shifts from the structural chemistry information gained by high-resolution studies to the context of structural physiology at larger length scales. Such techniques permit the study of isolated macromolecules as well as highly organized macromolecular assemblies as a whole under near-physiological conditions. Time-resolved approaches, made possible by advanced synchrotron instrumentation, add a crucial dimension to many of these investigations. This article reviews experimental approaches in non-crystalline X-ray scattering and diffraction that may be used to illuminate important scientific questions such as protein/nucleic acid folding and structure-function relationships in large macromolecular assemblies.

43 PARTICLE ACCELERATORS↗

Supercontinuum spectrum upon filamentation of laser pulses under conditions of strong and weak anomalous group velocity dispersion in transparent dielectrics

Using experiment and numerical simulation, we study the effect of anomalous group velocity dispersion (AGVD) on the formation of a visible supercontinuum band and light bullets arising in the course of filamentation of mid-IR femtosecond pulses in fused silica and fluorides. It is found that the anti-Stokes shift of the visible band increases with increasing energy of the pulse, the centre wavelength of which lies in the region of weak AGVD, and does not depend on this energy in the region of strong AGVD. A criterion is introduced for assessment of the AGVD ‘strength’, at which the stable visible supercontinuum band accompanies the formation of a robust light bullet in the mid-IR filament. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrafast exciton and trion dynamics in highly 𝑛-doped Mo⁢S 2 monolayers: Many-body effects

Understanding many-body interactions of excitons and charge carriers in monolayer semiconductors is crucial for tuning their unique optical properties and optimizing their performance in optoelectronic devices. However, the sensitivity of these atomically thin semiconductors to doping, defects, and strain–arising from synthesis, substrate, and environmental conditions–hinders consistent observation of many-body effects. In this work, we employed linear and ultrafast transient optical absorption spectroscopy to investigate the influence of background doping on exciton many-body interactions in Mo⁢S 2 monolayers. Using reversible molecular physisorption gating, we achieved a high background doping density of 4.9 × 10 13 c⁢m −2 in an argon environment, which is significantly higher than those attainable with conventional electrical gating. Our results reveal a photoinduced 𝐴-exciton resonance redshift, attributed to band-gap renormalization at a low background-doping density of 4.3 × 10 12 c⁢m −2 in an air environment, transitioning to a blueshift at a high background-doping density of 4.9 × 10 13 c⁢m −2 due to dominant Pauli blocking effects and vertical excitation shifts. We further observed transient energy splitting between free-exciton and -trion states up to 57 meV due to exciton-electron interactions. The ultrafast spectroscopy further revealed exciton and trion dynamics, including fast energy splitting of exciton and trion resonances within 1 picosecond (ps) followed by a rapid decay having a lifetime of ∼5.4 ps. Furthermore, our results demonstrate the critical role of background-doping conditions in tuning many-body interactions and quasiparticle dynamics in 2D semiconductors, providing valuable insights for future device design and material engineering.

Doped semiconductors↗

On the transcritical mixing of fuels at diesel engine conditions

Whilst the physics of both classical evaporation and supercritical fluid mixing are reasonably well characterized and understood in isolation, little is known about the transition from one to the other in the context of liquid fuel systems. The lack of experimental data for microscopic droplets at realistic operating conditions impedes the development of phenomenological and numerical models. To address this issue we performed systematic measurements using high-speed long-distance microscopy, for three single-component fuels (n-heptane, n-dodecane, n-hexadecane), into gas at elevated temperatures (700–1200 K) and pressures (2–11 MPa). We describe these high-speed visualizations and the time evolution of the transition from liquid droplet to fuel vapour at the microscopic level. The measurements show that the classical atomization and vaporisation processes do shift to one where surface tension forces diminish with increasing pressure and temperature, but the transition to diffusive mixing does not occur instantaneously when the fuel enters the chamber. Rather, subcritical liquid structures exhibit surface tension in the near-nozzle region and then, after time surrounded by the hot ambient gas and fuel vapour, undergo a transition to a dense miscible fluid. Although there was clear evidence of surface tension and primary atomization for n-dodecane and n-hexadecane for a period of time at all the above conditions, n-heptane appeared to produce a supercritical fluid from the nozzle outlet when injected at the most elevated conditions (1200 K, 10 MPa). This demonstrates that the time taken by a droplet to transition to diffusive mixing depends on the pressure and temperature of the gas surrounding the droplet as well as the fuel properties. We summarise our observations into a phenomenological model which describes the morphological evolution and transition of microscopic droplets from classical evaporation through a transitional mixing regime and towards diffusive mixing, as a function of operating conditions. We provide criteria for these regime transitions as reduced pressure–temperature correlations, revealing the conditions where transcritical mixing is important to diesel fuel spray mixing.

02 PETROLEUM↗

PROBING THE INTERSTELLAR MEDIUM OF z {approx} 1 ULTRALUMINOUS INFRARED GALAXIES THROUGH INTERFEROMETRIC OBSERVATIONS OF CO AND SPITZER MID-INFRARED SPECTROSCOPY

We explore the relationship between gas, dust, and star formation in a sample of 12 ultraluminous infrared galaxies (ULIRGs) at high-redshift compared to a similar sample of local galaxies. We present new CO observations and/or Spitzer mid-IR spectroscopy for six 70 {mu}m selected galaxies at z {approx} 1 in order to quantify the properties of the molecular gas reservoir, the contribution of an active galactic nucleus (AGN) to the mid-IR luminosity, and the star formation efficiency (SFE = L{sub IR}/L{sup '}{sub CO}). The mid-IR spectra show strong polycyclic aromatic hydrocarbon (PAH) emission, and our spectral decomposition suggests that the AGN makes a minimal contribution (<25%) to the mid-IR luminosity. The 70 {mu}m selected ULIRGs, which we find to be spectroscopic close pairs, are observed to have high SFE, similar to local ULIRGs and high-redshift submillimeter galaxies, consistent with enhanced IR luminosity due to an ongoing major merger. Combined with existing observations of local and high-redshift ULIRGs, we further compare the PAH, IR, and CO luminosities. We show that the ratio L{sub PAH,6.2}/L{sub IR} decreases with increasing IR luminosity for both local and high-redshift galaxies, but the trend for high-redshift galaxies is shifted to higher IR luminosities; the average L{sub PAH,6.2}/L{sub IR} ratio at a given L{sub IR} is {approx}3 times higher at high-redshift. When we normalize by the molecular gas, we find this trend to be uniform for galaxies at all redshifts and that the molecular gas is correlated with the PAH dust emission. The similar trends seen in the [C II] to molecular gas ratios in other studies suggests that PAH emission, like [C II], continues to be a good tracer of photodissociation regions even at high-redshift. Together the CO, PAH, and far-IR fine structure lines should be useful for constraining the interstellar medium conditions in high-redshift galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Long-term Coarsening and Function-time Evolution of an Initiator Powder

Long-term effectiveness of high-explosive devices necessitates maintaining a level of specific surface area of initiating powder components within specified margins. This ensures that ignition and detonation performance of the powder does not degrade significantly over time. Flow permeametry is a commonly employed surface characterization tool in this context, as embodied in the Fisher sub-sieve surface area (FSSA). Recently we made alterations to the commercial permeametry apparatus that enables accurate in situ measurements of FSSA using only ~ 100 mg samples. In this work we report on a 24-month aging study in such modified sample holders at elevated temperatures of 40 oC and 60 oC. Through a process called time-temperature-superposition (TTS) the resulting isotherms are translated into a single master curve that predicts powder FSSA evolution over decades under ambient temperature conditions. We generate master curves for two different powders, i.e., pure PETN and 1 wt% added TriPEON, and show that the TriPEON-doped powder coarsens at a rate a few times slower than the non-doped powder. Activation barriers computed from the TTS shift factors shed some light on the coarsening mechanisms.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

PCG method with Strang’s circulant preconditioner for Hermitian positive definite linear system in Riesz space fractional advection–dispersion equations

In this paper, preconditioned conjugate gradient (PCG) method with Strang’s circulant preconditioner is investigated to solve the Hermitian positive definite linear systems, which is result from the Crank–Nicolson (C-N) finite difference scheme with the weighted and shifted Grünwald difference (WSGD) operators to discretize the Riesz space fractional advection–dispersion equation (RSFADE). We show that the spectrum of the preconditioned matrix is clustered around 1, and the singular values of the preconditioned matrix are uniformly bounded away from zero under a certain condition, respectively; hence the PCG method, when applied to solving the preconditioned system, converges superlinearly. Moreover, the complexity in each iteration of the PCG method is O(Nlog N) via using the fast Fourier transforms, where N is the matrix size. Numerical experiments are included to demonstrate the effectiveness of our approach.

97 MATHEMATICS AND COMPUTING↗

Physics-informed machine learning of redox flow battery based on a two-dimensional unit cell model

In this paper, we present a physics-informed neural network (PINN) approach for predicting the performance of an all-vanadium redox flow battery, with its physics constraints enforced by a two-dimensional (2D) mathematical model. The 2D model, which includes 6 governing equations and 24 boundary conditions, provides a detailed representation of the electrochemical reactions, mass transport and hydrodynamics occurring inside the redox flow battery. To solve the 2D model with the PINN approach, a composite neural network is employed to approximate species concentration and potentials; the input and output are normalized according to prior knowledge of the battery system; the governing equations and boundary conditions are first scaled to an order of magnitude around 1, and then further balanced with a self-weighting method. Our numerical results show that the PINN is able to predict cell voltage correctly, but the prediction of potentials shows a constant-like shift. To fix the shift, the PINN is enhanced by further constrains derived from the current collector boundary. Finally, we show that the enhanced PINN can be even further improved if a small number of labeled data is available.

25 ENERGY STORAGE↗

Effect of Layer Charge on CO 2 and H 2 O Intercalations in Swelling Clays

The effect of layer charge on the intercalation of supercritical carbon dioxide (scCO 2 )–H 2 O mixture in Na-montmorillonite clay interlayers under T = 323 K and P = 90 bar geologic sequestration conditions has been further investigated. This effect includes the charge amount and its location (within either octahedral or tetrahedral layers due to isomorphic substitutions). Two clay models with different layer charges are used in this study. Simulation results show that the increase of charge amount shifts the monolayer-to-bilayer (1W-to-2W) hydration transition toward the lower relative humidity (RH), increasing water sorption at the expense of reducing the overall sorption amount of CO 2 in the clay interlayer. Furthermore, the combination of the influence of charge amount and charge location leads to insignificant changes in equilibrium basal spacings of the high- and low-charge clays. Molecular dynamics simulations show that the CO 2 dimers, which are frequently seen in low-charge clay interlayers, vanish in high-charge clay interlayers even at low RH of 30%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Environmental Controls on Water Vapor Deuterium Excess in the Coastal Boundary Layer: An Information Theory Perspective

We use information theory to quantify the environmental controls on water vapor deuterium excess (D-excess) in coastal Southern California from June 2023 through February 2024. Using Shannon entropy, mutual information (MI), and joint mutual information, metrics that capture both linear and nonlinear relationships, we identify the most informative variables and variable combinations governing D-excess across contrasting marine and continental regimes. Relative humidity with respect to sea surface temperature (RHS) is consistently the strongest individual predictor, explaining up to 27% of D-excess variability during marine conditions but only 10% in continental air masses. The Relative humidity(RHS) + sea surface temperature (SST) combination demonstrates synergistic effects, where their joint influence (explaining up to 36% of D-excess variability) exceeds what either variable achieves individually, confirming their coupled influence on deuterium excess. Wind direction complements RHS most effectively during continental conditions. The best three-variable combination (RHS + SST + Planetary Boundary Layer height) explains 38% of D-excess variability in marine air, while no combination exceeds 20% explanatory power during continental periods. Information theory shows that heteroscedasticity in D-excess relationships indicates regime shifts in controlling processes and quantifies fundamental constraints on predictor variables: some environmental factors like surface pressure or water vapor flux contain insufficient information content to explain D-excess variability regardless of their physical relevance. These results highlight the different predictability limits between marine and continental regimes, challenging the adequacy of linear models and providing a rigorous framework for quantifying the information content of isotope-climate relationships with implications for both modern and paleoclimate applications.

information theory↗

Functional composites by programming entropy-driven nanosheet growth

Here, nanomaterials must be systematically designed to be technologically viable. Driven by optimizing intermolecular interactions, current designs are too rigid to plug in new chemical functionalities and cannot mitigate condition differences during integration. Despite extensive optimization of building blocks and treatments, accessing nanostructures with the required feature sizes and chemistries is difficult. Programming their growth across the nano-to-macro hierarchy also remains challenging, if not impossible. To address these limitations, we should shift to entropy-driven assemblies to gain design flexibility, as seen in high-entropy alloys, and program nanomaterial growth to kinetically match target feature sizes to the mobility of the system during processing. In tis report, following a micro-then-nano growth sequence in ternary composite blends composed of block-copolymer-based supramolecules, small molecules and nanoparticles, we successfully fabricate high-performance barrier materials composed of more than 200 stacked nanosheets (125 nm sheet thickness) with a defect density less than 0.056 µm -2 and about 98% efficiency in controlling the defect type. Contrary to common perception, polymer-chain entanglements are advantageous to realize long-range order, accelerate the fabrication process (<30 min) and satisfy specific requirements to advance multilayered film technology. This study showcases the feasibility, necessity and unlimited opportunities to transform laboratory nanoscience into nanotechnology through systems engineering of self-assembly.

42 ENGINEERING↗

Radiation damage in tungsten under high-energy He-ion irradiation

Tungsten (W) is a primary candidate for plasma-facing components (PFCs) in fusion reactors and hybrid fission-fusion reactors. However, W suffers from severe microstructural damage under Helium (He) ion irradiation in operation conditions. Key irradiation parameters, including incident ion energy, fluence, and irradiation temperature, are known to determine the formation of He bubbles and dislocation loops, which ultimately lead to the degradation of mechanical properties, such as radiation hardening and ductile-to-brittle transition temperature (DBTT) shifts. Various strategies, for instance, interface engineering and alloying, have been developed to enhance He irradiation tolerance in W to address these challenges. Studies in the recent two decades have enhanced the understanding of the underlying mechanisms that drive defect evolution and mechanical performance degradation, thereby offering more insights into the design of more resilient W-based materials for extreme environments.

Liu, Yinghang [Purdue University]↗

Climate Change Alters Seedling Emergence and Establishment in an Old-Field Ecosystem

In shaping how ecosystems respond to climatic change, ecosystem structure can dominate over physiological responses of individuals, especially under conditions of multiple, simultaneous changes in environmental factors. Ecological succession drives large-scale changes in ecosystem structure over time, but the mechanisms whereby climatic change alters succession remain unresolved. Here, we investigate effects of atmospheric and climatic change on seedling establishment, recognizing that small shifts in seedling establishment of different species may have long-term repercussions on the transition of fields to forests in the future. Our 4-year experiment in an old-field ecosystem revealed that response of seedling emergence to different combinations of atmospheric CO2 concentration, air temperature, and soil moisture depends on seed phenology, the timing of seed arrival into an ecosystem. We conclude that seed phenology is an important plant trait that can shape, and help predict, the trajectories of ecosystems under climatic change.

54 ENVIRONMENTAL SCIENCES↗

CROCUS Sodar Measurements of Lower Atmospheric Wind Profiles at Argonne Testbed for Multiscale Observational Science (ATMOS) Site

The Scintec MFAS Sodar (Multiple-Frequency Acoustic Sounder) is an autonomous, ground-based acoustic remote sensing system designed to measure vertical profiles of horizontal wind speed, wind direction, and vertical velocity in the lower atmosphere. The instrument transmits sequences of acoustic pulses and detects the Doppler-shifted sound waves backscattered by small-scale temperature and velocity fluctuations caused by atmospheric turbulence. From these Doppler shifts, the system derives three-dimensional wind vectors by combining radial velocities from multiple beam orientations.The MFAS Sodar operates with a first usable range gate beginning at approximately 30 m above ground level and a configurable vertical resolution of 10 m. Under favorable acoustic conditions, the system provides wind profiles extending up to 600 m above ground level. Measurements are processed into 15-minute averaged profiles containing wind speed, direction, vertical velocity, and diagnostic quantities such as signal-to-noise ratio and echo strength.This dataset was collected at the Argonne Testbed for Multiscale Observational Science (ATMOS) facility in Lemont, Illinois, as part of DOE's CROCUS Urban Integrated Field Laboratory (UIFL) initiative. The purpose of these observations is to characterize the vertical wind structure and boundary-layer evolution across the urban–suburban gradient of the greater Chicago region. In particular, these data are intended to improve understanding of how local meteorology, such as lake-breeze penetration, nocturnal jets, and daytime mixing, varies between the densely built urban core and the suburban periphery. The MFAS observations provide critical context for evaluating high-resolution model simulations and for integrating with complementary lidar, radar, and in-situ meteorological measurements within the broader CROCUS UIFL network.All data are archived in NetCDF (Network Common Data Form) format and include wind and diagnostic parameters. The files can be accessed and analyzed using standard software that supports NetCDF, such as Python (e.g., xarray, netCDF4), MATLAB, R (e.g., ncdf4, raster), or Panoply (NASA’s NetCDF visualization application).

54 ENVIRONMENTAL SCIENCES↗

Microbial Community Structure and Functional Potential Along a Hypersaline Gradient

© 2018 Kimbrel, Ballor, Wu, David, Hazen, Simmons, Singer and Jansson. Salinity is one of the strongest environmental drivers of microbial evolution and community composition. Here we aimed to determine the impact of salt concentrations (2.5, 7.5, and 33.2%) on the microbial community structure of reclaimed saltern ponds near San Francisco, California, and to discover prospective enzymes with potential biotechnological applications. Community compositions were determined by 16S rRNA amplicon sequencing revealing both higher richness and evenness in the pond sediments compared to the water columns. Co-occurrence network analysis additionally uncovered the presence of microbial seed bank communities, potentially primed to respond to rapid changes in salinity. In addition, functional annotation of shotgun metagenomic DNA showed different capabilities if the microbial communities at different salinities for methanogenesis, amino acid metabolism, and carbohydrate-active enzymes. There was an overall shift with increasing salinity in the functional potential for starch degradation, and a decrease in degradation of cellulose and other oligosaccharides. Further, many carbohydrate-active enzymes identified have acidic isoelectric points that have potential biotechnological applications, including deconstruction of biofuel feedstocks under high ionic conditions. Metagenome-assembled genomes (MAGs) of individual halotolerant and halophilic microbes were binned revealing a variety of carbohydrate-degrading potential of individual pond inhabitants.

Kimbrel, Jeffrey A.↗