Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Sculpting Nanoscale Functional Channels in Complex Oxides Using Energetic Ions and Electrons

The formation of metastable phases has attracted significant attention because of their unique properties and potential functionalities. In the present study, we demonstrate the phase conversion of energetic-ion-induced amorphous nanochannels/tracks into a metastable defect fluorite in A 2 B 2 O 7 structured complex oxides by electron irradiation. Through in situ electron irradiation experiments in a scanning transmission electron microscope, we observe electron-induced epitaxial crystallization of the amorphous nanochannels in Yb 2 Ti 2 O 7 into the defect fluorite. This energetic-electron-induced phase transformation is attributed to the coupled effect of ionization-induced electronic excitations and local heating, along with subthreshold elastic energy transfers. We also show the role of ionic radii of A-site cations (A = Yb, Gd, and Sm) and B-site cations (Ti and Zr) in facilitating the electron-beam-induced crystallization of the amorphous phase to the defect-fluorite structure. The formation of the defect-fluorite structure is eased by the decrease in the difference between ionic radii of A- and B-site cations in the lattice. Molecular dynamics simulations of thermal annealing of the amorphous phase nanochannels in A 2 B 2 O 7 draw parallels to the electron-irradiation-induced crystallization and confirm the role of ionic radii in lowering the barrier for crystallization. Furthermore, these results suggest that employing guided electron irradiation with atomic precision is a useful technique for selected area phase formation in nanoscale printed devices.

36 MATERIALS SCIENCE↗

Active site design enables industrial scale H 2 O 2 electrosynthesis with metal-free catalysts

The electrosynthesis of hydrogen peroxide (H 2 O 2 ) via a two-electron oxygen reduction reaction enables decentralized H 2 O 2 production. While metal-free carbon catalysts are sustainable and low-cost, their performance is hindered by poorly defined active sites and uncontrolled defect states. Here, we resolve these challenges through active site design and catalyst screening using fluorine (F) and nitrogen (N) codoped carbons as model materials. Statistical analysis combined with density functional theoretical calculations reveals that F-induced structural modification and defect passivation optimize OOH* binding, with F-doping and adjacent F atoms predominantly lowering abs ΔG(OOH*). Experimental results confirm that semi-ionic C–F bonds passivate defects in nitrogen-doped carbon, enhancing catalytic activity and durability. The resulting (N, F)-codoped carbon achieves nearly 100% H 2 O 2 selectivity at 0.5–0.65 V versus the reversible hydrogen electrode and maintains > 95% across 0.01–0.65 V versus the reversible hydrogen electrode. In an electrolyzer, (N, F)-codoped carbon exhibits an H 2 O 2 yield rate of 74.35 mol g cat. −1 h -1 and sustains 300 mA cm -2 for 105 hours with ~95% faradaic efficiency. Coupling the two-electron oxygen reduction reaction with methanol oxidation further reduces cell voltage and enhances productivity. This work provides a means to design efficient catalysts for industrial H 2 O 2 electrosynthesis.

H2O2 electrosynthesis↗

Defect diffusion graph neural networks (d2gnn)

SAND2025-01004O Defect Diffusion Graph Neural Networks (d2gnn) is a software tool that assists in the discovery of new materials for high-temperature, clean-energy applications. It uses advanced graph neural networks to model the relationship between material structures and their defect properties. The application helps predict how materials will behave under different conditions and accelerates the development of innovative materials. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Witman, Matthew [Sandia National Lab. (SNL-CA), Li↗

Ab initio study of point defects near stacking faults in 3C-SiC

Interactions between point defects and stacking faults in 3C-SiC are studied using an ab initio method based on density functional theory. The results show that the discontinuity of the stacking sequence considerably affects the configurations and behavior of intrinsic defects, especially in the case of silicon interstitials. The existence of an intrinsic stacking fault (missing a C-Si bilayer) shortens the distance between the tetrahedral-center site and its second-nearest-neighboring silicon layer, making the tetrahedral silicon interstitial unstable. Instead of a tetrahedral configuration with four C neighbors, a pyramid-like interstitial structure with a defect state within the band gap becomes a stable configuration. In addition, orientation rotation occurs in the split interstitials that has diverse effects on the energy landscape of silicon and carbon split interstitials in the stacking fault region. Moreover, our analyses of ionic relaxation and electronic structure of vacancies show that the built-in strain field, owing to the existence of the stacking fault, makes the local environment around vacancies more complex than that in the bulk.

36 MATERIALS SCIENCE↗

Crystalline and amorphous models of highly damaged Fe

The structure of irradiated material near a primary knock on atom shortly after impact is largely unknown. Molecular dynamics simulations with classical force fields provide the foundation for our current understanding of the resulting cascade. Atomic level structural characterization is often in terms defects within the context of a perfect bulk, however, the choice of the best representation is complicated because the density of defects is high, the material is inhomogeneous and it is not in equilibrium. Here we explore the adaptation of tools typically employed to characterize homogeneous equilibrium liquids to the highly defected region of the cascade. The cascade structure shows some resemblance to that of the liquid or glass phase. The local temperature temporarily exceeds the melting temperature and the free energies of the liquid and defected crystal are comparable. Analysis of cascade structure will be important to the interpretation of first principles calculations of the electronic and magnetic states in cascade structures.

36 MATERIALS SCIENCE↗

Characterisation of magnesium silicate hydrate phases (M-S-H): A combined approach using synchrotron-based absorption-spectroscopy and ab initio calculations

The formation of magnesium-silicate-hydrate (M-S-H) phases has been observed at the interface between cement and argillaceous rock formations. In this study the atomic structure of M-S-H and magnesium-calcium-silicate-hydrate (M-C-S-H, a mixing with Ca) was performed by Mg K-edge X-ray absorption spectroscopy combined with ab-initio calculations. The results show that all magnesium containing phases have a TOT phyllosilicate structure with silica defects creating end of silica chains and an interlayer composed of Mg bound to hydroxide groups. Significant differences are observable between the M-S-H and the M-C-S-H. Firstly, the M-C-S-H phases have an enlarged structure compared to the M-S-H phases. Secondly, the results indicate that at least two geometrically distinct Mg octahedral sites are present for all phases. It is concluded that the Mg octahedra are attached to both Si tetrahedra in a manner similarly to that in talc and, to hydroxide groups in a manner similar to that in brucite.

36 MATERIALS SCIENCE↗

Unveiling long-lived dual emission in a tetraphenylethylene-based metal–organic framework

Incorporating photoactive linkers into metal–organic frameworks (MOFs) has proved useful in improving photophysical properties of organic chromophores. This is achieved by controlling the local packing of linkers or defect engineering within the MOF. Using these ideas, we demonstrate that a tetraphenylethylene-based MOF exhibits long-lived linker-based emission out to 1 μs—substantially longer than previously reported. The emission contains two independent components whose dynamics branch from early timescales. Furthermore these findings suggest that charge recombination and distinct defect sites exist and contribute a weak yet detectable emission, and demonstrate how high-sensitivity transient photoluminescence spectroscopy can reveal unexpected populations in nominally crystalline materials.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy of ZnSSe/CdSe short-period superlattices for III–V/II–VI multijunction solar cells

Results on the molecular-beam epitaxy growth of short-period alternately-strained ZnS{sub x}Se{sub 1−x}/CdSe superlattices which are pseudomorphic to GaAs (001) substrates and possess effective band-gap values within the range of E{sub g} ≈ 2.5–2.7 eV are presented. Oscillations of the specular-spot intensity in reflection high-energy electron diffraction are used for in situ control of the superlattice parameters. A method to determine the SL parameters (compositions and thicknesses of the constituent layers) based on combined analysis of the grown structures by low-temperature photoluminescence and X-ray diffractometry is developed. It is found that the parameters of the grown ZnS{sub x}Se{sub 1−x}/CdSe superlattices are close to their design values and the density of extended defects in the structures is low even though the structure thickness (∼300 nm) considerably exceeds the critical thickness for bulk II–VI layers with the same lattice-constant mismatch.

36 MATERIALS SCIENCE↗

Generating Intense Attosecond X-Ray Pulses Using Ultraviolet-Laser-Induced Microbunching in Electron Beams

We propose a scheme that combines the echo-enabled harmonic generation technique with the bunch compression and allows to generate harmonic numbers of a few hundred in a microbunched beam through up-conversion of the frequency of an ultraviolet seed laser. Sending this beam through a short undulator results in an isolated sub-100 attoseconds pulse of x-ray radiation. Using a representative realistic set of parameters, we show that 1 nm x-ray pulse with peak power exceeding 100 MW and duration as short as 34 attoseconds (FWHM) can be generated from a 200 nm ultraviolet seed laser.

43 PARTICLE ACCELERATORS↗

Structure-phase states evolution in rails during a long operation

By methods of scanning and transmission electron microscopy the transformation regularities of structure-phase states, defect substructure, fracture surface of rail surface layer up to 10 mm deep in process of long-term operation (passed tonnage of gross weight 1000 mln tons) were revealed. It has been shown that the surface layer ∼20 μm in thickness has a multiphase, submicro- and nanocrystalline structure and it contains micropores and microcracks. The increased density of bend extinction contours at 2 mm depth from the tread contact surface was noted. The analysis of structure morphological constituents and internal stress fields, created by intra- and interphase boundaries after long operation was carried out. It was shown that the maximum amplitude of stress fields was formed on the interphase boundary the globular cementite particle–matrix. The evaluation of stress fields was done.

36 MATERIALS SCIENCE↗

Pulsed Thermal Tomography Nondestructive Examination of Additively Manufactured Reactor Materials (Second Annual Progress Report)

Additive manufacturing (AM) is an emerging method for cost-efficient fabrication of nuclear reactor parts. AM of metallic structures for nuclear energy applications is currently based on laser powder bed fusion (LPBF) process, which can introduce internal material flaws, such as pores and anisotropy. Integrity of AM structures needs to be evaluated nondestructively because material flaws could lead to premature failures due to exposure to high temperature, radiation and corrosive environment in a nuclear reactor. Thermal tomography (TT) provides a capability for non-destructive evaluation of sub-surface defects in arbitrary size structures. Thermal tomography is a computational method for heat diffusion-based imaging of solids, which provides 3D visualization of data from flash thermography measurements. We investigate thermal tomography imaging and nondestructive evaluation of stainless steel and nickel super alloy metallic structures produced with laser powder bed fusion (LPBF) additive manufacturing (AM) process. Metallic structures produced with LPBF contain defects, and there are limited capabilities to evaluate these structures non-destructively. Thermal tomography reconstruction of 3D apparent spatial effusivity provides information about AM structure geometry and internal material flaws. We study performance of thermal tomography in imaging of metallic structures through COMSOL computer simulations of transient heat transfer, and through reconstruction of data obtained from experimental measurements. Reconstruction of internal defects is investigated using a stainless steel 316L specimen with flat bottom hole (FBH) indentations, and Inconel 718 plate produced with laser powder bed fusion (LPBF) method, which contains imprinted hemispherical shape low density regions containing non-sintered metallic powder. The FBH’s have the same sizes as the imprinted defects in the LPBF specimens, but offer better imaging contrast. Thermal tomography reconstructions provide visualizations of internal defects, and allow for estimation of their sizes and locations. Detection sensitivity of TT is limited by noises. We investigate separation of signal from noise in thermography images using several machine learning (ML) methods, including new spatio-temporal blind source separation (STBSS) and spatio-temporal sparse dictionary learning (STSDL) methods. Performance of the ML methods is benchmarked using thermography data obtained from imaging stainless steel 316L and Inconel 718 specimens produced LPBF method with imprinted calibrated porosity defects. The ML methods are ranked by F-score and execution runtime. Finally, we investigate TT of AM stainless steel 316L specimen with imprinted internal porosity defects using relatively low-cost, small form factor infrared (IR) camera based on uncooled micro bolometer detector. Sparse coding related K-means singular value decomposition (SVD) machine learning, image processing algorithms are developed to improve quality of TT images through removal of Additive white Gaussian noise without blurring the images. Following initial qualification of an AM component for deployment in a nuclear reactor, a compact TT can also be used for in-service nondestructive evaluation (NDE). With capability to perform in-service NDE of the AM component lifecycle, TT data can be used for development of a component digital twin.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Decoding the spectroscopic features and time scales of aqueous proton defects

Acid solutions demonstrate a variety of complex structural and dynamical features arising from the presence of multiple interacting reactive proton defects and counterions. Yet, disentangling the transient structural motifs of proton defects in the water hydrogen bond network and the mechanisms for their interconversion remains a formidable challenge. In this work, we use simulations treating the quantum nature of both the electrons and nuclei to show how the experimentally observed spectroscopic features and relaxation time scales can be elucidated using a physically transparent coordinate that encodes the overall asymmetry of the solvation environment of the proton defect. We demonstrate that this coordinate can be used both to discriminate the extremities of the features observed in the linear vibrational spectrum and to explain the molecular motions that give rise to the interconversion time scales observed in recent nonlinear experiments. This analysis provides a unified condensed-phase picture of the proton structure and dynamics that, at its extrema, encompasses proton sharing and spectroscopic features resembling the limiting Eigen [H 3 O(H 2 O) 3 ]+ and Zundel [H(H 2 O) 2 ]+ gas-phase structures, while also describing the rich variety of interconverting environments in the liquid phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupled field-structural analysis of HGTR fuel brick using ABAQUS

High-temperature, gas-cooled reactors (HTGRs) are usually helium-gas cooled, with a graphite core that can operate at reactor outlet temperatures much higher than can conventional light water reactors. In HTGRs, graphite components moderate and reflect neutrons. During reactor operation, high temperature and high irradiation cause damage to the graphite crystal and grains and create other defects. This cumulative structural damage during the reactor lifetime leads to changes in graphite properties, which can alter the ability to support the designed loads. The aim of the present research is to develop a finite-element code using commercially available ABAQUS software for the structural integrity analysis of graphite core components under extreme temperature and irradiation conditions. In addition, the Reactor Geometry Generator tool-kit, developed at Argonne National Laboratory, is used to generate finite-element mesh for complex geometries such as fuel bricks with multiple pin holes and coolant flow channels. This paper presents the proposed concept and discusses results of stress analysis simulations of a fuel block with H-451 grade material properties. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Anodes for Lithium-Ion Batteries Based on Type I Silicon Clathrate Ba 8 Al 16 Si 30 - Role of Processing on Surface Properties and Electrochemical Behavior

Type I silicon clathrates based on Ba 8 Al y Si 46- y (8 < y < 12) have been studied as potential anodes for lithium-ion batteries and display electrochemical properties that are distinct from those found in conventional silicon anodes. Processing steps such as ball-milling (typically used to reduce the particle size) and acid/base treatment (used to remove nonclathrate impurities) may modify the clathrate surface structure or introduce defects, which could affect the observed electrochemical properties. Here, we perform a systematic investigation of Ba 8 Al y Si 46- y clathrates with y ≈ 16, i.e, having a composition near Ba 8 Al 16 Si 30 , which perfectly satisfies the Zintl condition. The roles of ball-milling and acid/base treatment were investigated using electrochemical, X-ray diffraction, electron microscopy, X-ray photoelectron and Raman spectroscopy analysis. The results showed that acid/base treatment removed impurities from the synthesis, but also led to formation of a surface oxide layer that inhibited lithiation. Ball-milling could remove the surface oxide and result in the formation of an amorphous surface layer, with the observed charge storage capacity correlated with the thickness of this amorphous layer. According to the XRD and electrochemical analysis, all lithiation/delithiation processes are proposed to occur in single phase reactions at the surface with no discernible changes to the crystal structure in the bulk. Electrochemical impedance spectroscopy results suggest that the mechanism of lithiation is through surface-dominated, Faradaic processes. Lastly, this suggests that for off-stoichiometric clathrates, as we studied in our previous work, Li + insertion at defects or vacancies on the framework may be the origin of reversible Li cycling. However, for clathrates Ba 8 Al y Si 46- y with y ≈ 16, Li insertion in the structure is unfavorable and low capacities are observed unless amorphous surface layers are introduced by ball-milling.

25 ENERGY STORAGE↗