Search NASA⌕ Search

SEARCH · Search NASA

Results for “density model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Electron-Ion Dynamics with Time-Dependent Density Functional Theory: Towards Predictive Solar Cell Modeling

This project focussed on two aspects of computational modeling with a view toward application for photovoltaic design: (i) increased reliability of exchange-correlation functionals in time-dependent density functional theory (TDDFT) (a method of choice of the calculation of electronic spectra and dynamics), especially for time-resolved non-perturbative dynamics, and (ii) the development of a practical but rigorously-based method for coupling electronic and nuclear motion via the exact-factorization (EF) approach (a relatively new framework for developing approximations).

97 MATHEMATICS AND COMPUTING↗

Comparative Accuracies of Models for Drag Prediction During Geomagnetically Disturbed Periods: A First Principles Model Versus Empirical Models

We examine the accuracy of density prediction by the first principles model Thermosphere Ionosphere Electrodynamics General Circulation Model (TIEGCM) developed by the National Center for Atmospheric Research and compare it to the accuracy of three empirical models: Jacchia 71, the Naval Research Laboratory Mass Spectrometer Incoherent Scatter Extended 2000 (NRLMSIS), Jacchia 1971, and Jacchia-Bowman 2008. Comparisons are made for three large storms: the October 2003 storm, the March 2013 storm, and the March 2015 storm. To evaluate the accuracy of these models we use tracking data for nine space objects in low Earth orbit. Additionally, we evaluate the accuracy of the TIEGCM and NRLMSIS with data from high precision accelerometers on the Challenging Minisatellite Payload (CHAMP) and Gravity field and Circulation Explorer (GOCE) satellites. The goal is to assess the use of a first principles model as a potential tool for forecasting satellite drag during large magnetic storms. For the storms considered, we found the TIEGCM, JB2008, and NRLMSIS models to be substantially more accurate than the Jacchia 71 model. The accuracies of the TIEGCM and JB2008 models were similar, but overall, the TIEGCM was more accurate. We found smaller differences for TIEGCM versus CHAMP than for NRLMIS for the Halloween Storm, and smaller differences than results published for JB2008 and the assimilative model HASDM. The empirical models are at present more practical for operational purposes, but the TIEGCM, developed as a research model, with a greater focus on operational use offers the potential for improved utility during stressing conditions.

R. L. Walterscheid↗

Resolve survey photometry and volume-limited calibration of the photometric gas fractions technique

We present custom-processed ultraviolet, optical, and near-infrared photometry for the REsolved Spectroscopy of a Local VolumE (RESOLVE) survey, a volume-limited census of stellar, gas, and dynamical mass within two subvolumes of the nearby universe (RESOLVE-A and RESOLVE-B). RESOLVE is complete down to baryonic mass ∼10{sup 9.1−9.3} M{sub ⊙}, probing the upper end of the dwarf galaxy regime. In contrast to standard pipeline photometry (e.g., SDSS), our photometry uses optimal background subtraction, avoids suppressing color gradients, and employs multiple flux extrapolation routines to estimate systematic errors. With these improvements, we measure brighter magnitudes, larger radii, bluer colors, and a real increase in scatter around the red sequence. Combining stellar mass estimates based on our optimized photometry with the nearly complete H i mass census for RESOLVE-A, we create new z = 0 volume-limited calibrations of the photometric gas fractions (PGF) technique, which predicts gas-to-stellar mass ratios (G/S) from galaxy colors and optional additional parameters. We analyze G/S-color residuals versus potential third parameters, finding that axial ratio is the best independent and physically meaningful third parameter. We define a “modified color” from planar fits to G/S as a function of both color and axial ratio. In the complete galaxy population, upper limits on G/S bias linear and planar fits. We therefore model the entire PGF probability density field, enabling iterative statistical modeling of upper limits and prediction of full G/S probability distributions for individual galaxies. These distributions have two-component structure in the red color regime. Finally, we use the RESOLVE-B 21 cm census to test several PGF calibrations, finding that most systematically under- or overestimate gas masses, but the full probability density method performs well.

79 ASTRONOMY AND ASTROPHYSICS↗

Multi-scale First-Principles Modeling of Three-Phase System of Polymer Electrolyte Membrane Fuel Cel

The three-phase system consisting of Nafion, graphite and platinum in the presence of water is studied using molecule dynamics simulation. The force fields describing the molecular interaction between the components in the system are developed to reproduce the energies calculated from density functional theory modeling. The configuration of such complicated three-phase system is predicted through MD simulations. The nanophase-segregation and transport properties are investigated from the equilibrium state. The coverage of the electrolyte on the platinum surface and the dissolution of oxygen are analyzed.

08 HYDROGEN↗

Short-term variability of nitrogen dioxide in the winter stratosphere

Measurements of limb radiance from the Solar Mesosphere Explorer (SME) satellite are used to infer the NO2 density at the 10- and 16-mbar pressure levels from January 1 to March 31 of 1982. A photochemical-dynamical model is developed using the presently accepted chemistry of the NO(x) family. The dynamical model produces isentropic trajectories which simulate the history of air parcels. From the trajectories the photochemical model calculates NO2 densities, which are compared to those observed by SME. Although the model generally reproduces the spatial and temporal variations rather well, some disagreement was noted for conditions of exceptionally low temperatures. Further analysis indicates that the temperature sensitivity of the N2O5 photolysis cross sections may be overestimated at low temperatures.

Zawodny, J. M.↗

The radial profile and flattening of the Milky Way’s stellar halo to 80 kpc from the SEGUE K-giant survey

We characterize the radial density, metallicity, and flattening profile of the Milky Way’s stellar halo, based on the large sample of spectroscopically confirmed giant stars from SDSS/SEGUE-2, spanning galactocentric radii 10 kpc ≤ r{sub GC} ≤ 80 kpc. After excising stars that were algorithmically attributed to apparent halo substructure (including the Sagittarius stream), the sample has 1757 K giants, with a typical metallicity precision of 0.2 dex and a mean distance accuracy of 16%. Compared to blue horizontal branch stars or RR Lyrae variables, giants are more readily understood tracers of the overall halo star population, with less bias in age or metallicity. The well-characterized selection function of the sample enables forward modeling of those data, based on ellipsoidal stellar density models, ν{sub *}(R, z), with Einasto profiles and (broken) power laws for their radial dependence, combined with a model for the metallicity gradient and the flattening profile. Among models with constant flattening, these data are reasonably well fit by an Einasto profile of n = 3.1 ± 0.5 with an effective radius r{sub eff}=15±2 kpc and a flattening of q = 0.7 ± 0.02, or comparably well by an equally flattened broken power law, with radial slopes of α{sub in} = 2.1 ± 0.3 and α{sub out} = 3.8 ± 0.1, with a break radius of r{sub break} = 18 ± 1 kpc; this is largely consistent with earlier work. We find a modest but significant metallicity gradient within the “outer” stellar halo, [Fe/H] decreasing outward. If we allow for a variable flattening q=f(r{sub GC}), we find the distribution of halo giants to be considerably more flattened at small radii, q(10 kpc) = 0.55 ± 0.02, compared to q(>30 kpc) = 0.8 ± 0.03. Remarkably, the data are then very well fit by a single power law with index of 4.2 ± 0.1 on the variable r{sub q}≡√(R{sup 2}+(z/q(r)){sup 2}). In this simple and better-fitting model, there is a break in flattening at ∼20 kpc, instead of a break in the radial density function. While different parameterizations of the radial profile vary in their parameters, their implied density gradient, ∂lnν{sub ∗}/∂lnr, is stable along a direction intermediate between major and minor axis; this gradient is crucial in any dynamical modeling that uses halo stars as tracers.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurements and modeling of high-temperature, high-pressure density for binary mixtures of propane with n-decane and propane with n-eicosane

Binary mixture density data are reported for propane (C 3 ) with n-decane (C 10 ) and with n-eicosane (C 20 ) at T = (320 to 525) K and pressures to 265 MPa. The (C 3 + C 10 ) mixture density data are in good agreement with available literature data to 70 MPa, which is the maximum reported literature pressure. We found that there are no available binary mixture density data to compare to the (C 3 + C 20 ) mixture density data reported in the present study. Furthermore, the mixture density data are correlated with the Tait equation to facilitate interpolation of the data at different experimental conditions. Equations of state that are suitable for reservoir simulations are used to model the reported data. These models include the Peng–Robinson equation of state (PREoS), a volume-translated PREoS fit to high temperature, high pressure (HTHP) pure component density data, the PC-SAFT EoS, and modifications of the PC-SAFT EoS developed for better representation of HTHP data. As a result, the models give superior density predictions for (C 3 + C 10 ) mixtures compared to (C 3 + C 20 ) mixtures.

02 PETROLEUM↗

Analysis of holographic interferograms of aerodynamic models in a wind tunnel

Holographic interferometry provides a non-invasive technique for estimating variations in the air density distribution around aerodynamic models in wind tunnels. The testing of this technique has been underway for some time and has been reported previously for a two dimensional aerodynamic model. Results obtained from tests using three dimensional aerodynamic models are summarized. Holograms were made of aerodynamic models in a wind tunnel. Interferograms were made from these holograms. The interference fringes in these holographic interferograms were digitized and this information was entered into the HOLOFT program. The HOLOFT program successfully calculated the known stagnation air density at the nose of a model and the known air density distribution across the cross section passing through the stagnation point for the axisymmetrical case of this model at a Mach number of 0.8. Thus the technique of holographic interferometry does work.The HOLOFT program stands for HOLOgraphic Inversion by 2-D Fourier Transform.

Perry, R. L.↗

Modeling EUV Intensity at the Top of the Transition Region Using SPICE Data on Board Solar Orbiter

The Spectral Imaging of Coronal Environment (SPICE; SPICE Consortium et al. 2020) provides an extraordinary opportunity to study the chromosphere and transition region using EUV wavelengths, e.g., Ne VIII 770 Å, CIII 977 Å, OVI 1032 Å, and Lyman-𝛽 025 Å. We present results modeling Ne VIII 770 Å intensity using images from SPICE and the COronal DEnsity and Temperature (CODET) model. This model is based on relationships between the magnetic field, density, and temperature. It uses a flux transport model, the Potential Field Extrapolation model (PFSS), an emission model based on Chianti atomic database 10.0.2, and an optimization algorithm. In addition, we assume that the emission from the top of the transition region (Ne VIII 770 Å) can be described using the magnetic field in the coronal base at 1.014𝑅⨀ (from PFSS). We found the mean full disc electron density in the transition region obtained from the CODET model for Ne VIII 770 Å (𝑙𝑜𝑔10𝑇[𝐾] = 5.8) corresponds to ∼ 𝑙𝑜𝑔10𝑁 𝑐𝑚−3 >9, and temperature value is 𝑙𝑜𝑔10𝑇[𝐾]~6. This value agrees with the Ne VIII 770 Å temperature formation 𝑙𝑜𝑔10𝑇[𝐾]~5.8. The density above sunspots (𝐵 > 50 𝐺) corresponds to 𝑙𝑜𝑔10𝑁 𝑐𝑚−3 > 9, while in quiet Sun regions (𝐵 < 50 𝐺) the mean density is 𝑙𝑜𝑔10𝑁[𝑐𝑚−3 ] = 8 .

Jenny M Rodriguez Gomez↗

Probing the Anisotropy of the Milky Way Gaseous Halo-II: Sightline toward Mrk 509

Hot, million degree gas appears to pervade the Milky Way halo, containing a large fraction of the Galactic missing baryons. This circumgalactic medium (CGM) is probed effectively in X-rays, both in absorption and in emission. The CGM also appears to be anisotropic, so we have started a program to determine CGM properties along several sightlines by combining absorption and emission measurements. Here we present the emission measure close to the Mrk 509 sightline using new Suzaku and XMM-Newton observations. We also present new analysis and modeling of Chandra HETG spectra to constrain the absorption parameters. The emission measure in this sightline is high, EM = 0.0165 ± 0.0008 ± 0.0006 cm{sup −6} pc, five times larger than the average. The observed O vii column density N(O vii) = 2.35±0.4×10{sup 16} cm{sup −2}, however, is close to the average. We find that the temperature of the emitting and absorbing gas is the same: logT(K) = 6.33 ± 0.01 and logT(K) = 6.33 ± 0.16 respectively. We fit the observed column density and emission measure with a β-model density profile. The central density is constrained to be between n {sub 0} = 2.8–6.0 × 10{sup −4} cm{sup −3} and the core radius of the density profile has a lower limit of 40 kpc. This shows that the hot gas is mostly in the CGM of the galaxy, not in the Galactic disk. Our derived density profile is close to the Maller and Bullock profile for adiabatic gas in hydrostatic equilibrium with an NFW dark-matter potential well. Assuming this density profile, the minimum mass of the hot CGM is 3.2×10{sup 10} M {sub ⊙}.

79 ASTRONOMY AND ASTROPHYSICS↗

Time-dependent model of the Martian atmosphere for use in orbit lifetime and sustenance studies

A time-dependent model of the Martian atmosphere suitable for calculation of long-term aerodynamic effects on low altitude satellites is presented. The atmospheric model is both position dependent, through latitude and longitude effects, and time dependent. The time dependency includes diurnal and seasonal effects, effects of annual motion, long and short term solar activity effects, and periodic dust storm effects. Nine constituent gases are included in the model. Uncertainties in exospheric temperature, turbidity, and turbopause altitude are used to produce bounds on the expected density. A computer model - a Fortran subroutine which, when given the Julian date, Cartesian position of the sun and the spacecraft in aerocentric coordinates, returns the local values of mass density, temperature, scale height, and upper and lower bounds on the mass density is presented.

Culp, R. D.↗

Dislocation-Limited Thermal Conductivity in LiF: Revisiting Perturbative Models

We revisit models to describe phonon-dislocation interactions and resulting dislocation-limited thermal conductivity (k), particularly as applied to describe the temperature-dependent k behavior of LiF with significant dislocation densities. Coupling semiempirical models of phonon scattering from dislocation strain fields provided by Klemens and Carruthers with density functional theory description of the phonons and input parameters, we find that both models significantly overpredict the measured k of LiF, as found previously. However, more direct application of the quantum perturbation theory description, from which the models were derived, gives significantly stronger phonon-dislocation scattering and strongly underpredicts the measured k data. We revisit the derivation of phonon-dislocation-strain field scattering and provide numerical details regarding its implementation. This work demonstrates that quantum perturbative calculations, now accessible to modern computational architectures, may provide a reasonable description of dislocation-limited k in materials as governed by phonon-strain field interactions provided that questions regarding the relevant strain field range can be resolved.

36 MATERIALS SCIENCE↗

Electron-Ion Dynamics with Time-Dependent Density Functional Theory: Towards Predictive Solar Cell Modeling

This project worked towards developing predictive and practical methods for electron-ion dynamics, to model processes involved in solar energy conversion for eventual use in the design of photovoltaic devices. The methods centered on time-dependent density functional theory (TDDFT) for electrons, with coupling to ions described based on the recently developed exactfactorization approach.

Maitra, Neepa T.↗

Post-flight Analysis of Atmospheric Properties from Mars 2020 Entry, Descent, and Landing

The Mars 2020 spacecraft landed the Perseverance rover and Ingenuity helicopter successfully in Jezero crater on Feb. 18, 2021. The entry, descent, and landing (EDL) sequence of the spacecraft largely leveraged the previous 2012 Mars Science Laboratory (MSL) mission. The atmospheric modeling approach for Mars 2020 was also borrowed from MSL. It consisted of two mesoscale atmospheric models of the target site during the Martian season of landing, and a statistical model of the pressure, density, temperature, and winds based on the mesoscale model data. This paper briefly describes the pre-flight atmospheric models used for Mars 2020, but focuses on the post-flight assessment of these models and comparison to near-landing day orbiter sounder and other onboard atmospheric measurements. Observations from post-flight analysis showed that density was under-predicted in the upper atmosphere, but within the altitudes covered by the mesoscale models, the pre-flight modeling matched post-flight results, including for quantities like wind velocities. Potential improvements to address the upper atmosphere and other deficiencies of the Mars 2020 pre-flight model are also discussed.

Villar, Gregorio↗

An analysis of the structure of an n-dodecane spray flame using TPDF modelling

With a view to understanding ignition and combustion behaviours in diesel engines, this study investigates several aspects of ignition and combustion of an n-dodecane spray in a high pressure, high temperature chamber, known as Spray A, using data resulting from modelling using the transported probability density function (TPDF) method. The model has been validated comprehensively with good to excellent agreement in our previous work against all available experimental data including for mixture-fraction and velocity fields in non-reacting cases, and flame lift-off length and ignition delay in reacting cases. This good agreement encourages further investigation of the numerical model results to help understand the structure of this flame, which serves to complement the experimental information that is available, which is very limited due to the difficult experimental conditions in which this flame exists. For example, quantitative experimental measurements of local mixture-fraction, temperature, velocity gradients, etc. are not yet possible in reacting cases. Analysis of the model results shows that two-stage ignition is found to occur across the ambient temperature conditions considered: the first stage is rapidly initiated on the lean side where temperatures are high and sequentially moves to richer, cooler conditions. The first stage is extremely resilient to turbulence, occurring in a region of very low Damkohler number. The second stage of ignition occurs first in rich mixtures in a region behind the head of the fuel jet where mixture gradients are low, and appears to be influenced strongly by turbulence. Relative to a homogeneous reactor, it is delayed on the lean side but advanced on the rich side, suggesting entrainment and mixing from the early igniting lean regions into richer mixtures is an important moderator of the ignition process. The second-stage ignition front propagates at very high velocities initially, suggesting it is a sequential ignition moving according to gradients of ignition delay and/or residence time. The flame stabilises however on the lean side in a region of much lower velocity, where turbulent velocity fluctuations are sufficiently high such that turbulent transport influences the propagation. It stabilises in a region of low Damkohler number which implies that a competition of chemistry versus micro-mixing might also be involved in stabilisation. The stabilisation mechanism is investigated by an analysis of the transport budgets, showing the flame is stabilised by autoignition but moderated by turbulent diffusion. Further analysis of the flame index supports this stabilisation mechanism, and demonstrates the simultaneous existence of non-premixed and premixed combustion modes in the same flame. Analysis of the flow fields also reveals that local entrainment and dilatation are important flow features near the flame base. (C) 2015 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Diesel↗

RCrane: semi-automated RNA model building

RCrane is a new tool for the partially automated building of RNA crystallographic models into electron-density maps of low or intermediate resolution. This tool helps crystallographers to place phosphates and bases into electron density and then automatically predicts and builds the detailed all-atom structure of the traced nucleotides. RNA crystals typically diffract to much lower resolutions than protein crystals. This low-resolution diffraction results in unclear density maps, which cause considerable difficulties during the model-building process. These difficulties are exacerbated by the lack of computational tools for RNA modeling. Here, RCrane, a tool for the partially automated building of RNA into electron-density maps of low or intermediate resolution, is presented. This tool works within Coot, a common program for macromolecular model building. RCrane helps crystallographers to place phosphates and bases into electron density and then automatically predicts and builds the detailed all-atom structure of the traced nucleotides. RCrane then allows the crystallographer to review the newly built structure and select alternative backbone conformations where desired. This tool can also be used to automatically correct the backbone structure of previously built nucleotides. These automated corrections can fix incorrect sugar puckers, steric clashes and other structural problems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

RESOLVED RADIO EMISSION FROM MODELS OF PHOTOEVAPORATED DISKS AROUND MASSIVE YOUNG STARS

We study the radio continuum and thermal hydrogen radio recombination line (RRL) emission from photoevaporated disk wind models around massive young stars. We applied the models of Lugo and coworkers to the source MWC 349A. The resolved synthetic radio continuum maps reproduce the observed hourglass morphology at low frequency but are more flattened than the observations at high frequency because the density in the model decreases too fast. These photoevaporated wind models naturally produce RRLs with FWHM {Delta}v {approx} 60 km s{sup -1}. Nevertheless, recent H66{alpha} line observations of MWC 349A by Loinard and Rodriguez have an FWHM {Delta}v {approx} 89 km s{sup -1}. We propose that such wide lines could be produced by an extra magnetocentrifugal acceleration of the flow due to a poloidal magnetic field anchored in the disk. Such fields could also prevent the flow divergence and the fast density drop of the photoevaporated disk wind model. To mimic this effect we include in this model a large non-thermal velocity dispersion {sigma}{sub nt} {approx} 70 km s{sup -1}. The width of the RRLs of this modified model increases with quantum number. This is in contrast with the observed H76{alpha} and H92{alpha} lines which are narrower than the H66{alpha} line. We argue that the low-frequency observations could have suffered from insufficient bandwidth and that new measurements of these lines would be very valuable to constrain the models. Finally, the resolved H66{alpha} and H53{alpha} line emission maps show the velocity asymmetry expected from flow rotation.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantifying uncertainty in material damage from vibrational data

The response of a vibrating beam to a force depends on many physical parameters including those determined by material properties. Damage caused by fatigue or cracks results in local reductions in stiffness parameters and may drastically alter the response of the beam. Data obtained from the vibrating beam are often subject to uncertainties and/or errors typically modeled using probability densities. The goal of this paper is to estimate and quantify the uncertainty in damage modeled as a local reduction in stiffness using uncertain data. We present various frameworks and methods for solving this parameter determination problem. We also describe a mathematical analysis to determine and compute useful output data for each method. We apply the various methods in a specified sequence that allows us to interface the various inputs and outputs of these methods in order to enhance the inferences drawn from the numerical results obtained from each method. Numerical results are presented using both simulated and experimentally obtained data from physically damaged beams.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗