Search NASA⌕ Search

SEARCH · Search NASA

Results for “difference frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Charge Transfer and Support Effects in Heterogeneous Catalysis

The kinetic, electronic and spectroscopic properties of two-dimensional oxide-supported catalysts were investigated in order to understand the role of charge transfer in catalysis. Pt/TiO 2 nanodiodes were fabricated and used as catalysts for hydrogen oxidation. During the reaction, the current through the diode, as well as its I-V curve, were monitored, while gas chromatography was used to measure the reaction rate. The current and the turnover rate were found to have the same temperature dependence, indicating that hydrogen oxidation leads to the non-adiabatic excitation of electrons in Pt. A fraction of these electrons have enough energy to ballistically transport through Pt and overcome the Schottky barrier at the interface with TiO 2 . The yield for this phenomenon is on the order of 10 -4 electrons per product molecule formed, similar to what has been observed for CO oxidation and for the adsorption of many different molecules. The same Pt/TiO 2 system was used to compare currents in hydrogen oxidation and deuterium oxidation. The current through the diode under deuterium oxidation was found to be greater than under hydrogen oxidation by a factor of three. Weighted by the difference in turnover frequencies for the two isotopes, this would imply a chemicurrent yield 5 times greater for D 2 compared to H 2 , contrary to what is expected given the higher mass of D 2 . Reversible changes in the rectification factor of the diode are observed when switching between D 2 and H 2 . These changes are a likely cause for the differences in current between the two isotopes. In the nanodiode experiments, surface chemistry leads to charge flow, suggesting the possibility of creating charge flow to tune surface chemistry. This was done first by exposing a Pt/Si diode to visible light while using it as a catalyst for H 2 oxidation. Absorption of the light in the Si, combined with the band bending at the interface, gives rise to a steady-state flow of hot holes to the surface. This leads to a decrease in turnover on the surface, an effect which is enhanced when a reverse bias is applied to the diode. Similar experiments were carried out for CO oxidation. On Pt/Si diodes, the reaction rate was found to increase when a forward bias was applied. When the diode was exposed to visible light and a reverse bias was applied, the rate was instead decreased. This implies that a flow of negative charges to the surface increases turnover, while positive charges decrease it. Charge flow in an oxide supported metal catalyst can be modified even without designing the catalyst as a solid state electronic device. This was done by doping stoichiometric and nonstoichiometric TiO 2 films with F, and using the resulting oxides as supports for Pt films. In the case of stoichiometric TiO 2 , F was found to act as an n-type dopant, creating a population of filled electronic states just below the conduction band, and dramatically increasing the conductivity of the oxide film. The electrons in those states can transfer to surface O, activating it for reaction with CO, and leading to increased turnover for CO oxidation. This reinforces the hypothesis that CO oxidation is activated by a flow of negative charges to the surface. The same set of catalysts was used for methanol oxidation. The electronic properties of the TiO 2 films again correlated with the turnover rates, but also with selectivity. With stoichiometric TiO 2 as the support, F-doping caused an increase in selectivity toward the formation of partial oxidation products, formaldehyde and methyl formate, versus the total oxidation product, CO 2 . With non-stoichiometric TiO 2 , F-doping had the reverse effect. Ambient Pressure X-Ray Photoelectron Spectroscopy was used to investigate this F-doping effect in reaction conditions. In O 2 alone, and in CO oxidation conditions, the O1s spectrum showed a high binding energy peak that correlated in intensity with the activity of the different films: for stoichiometric films, the peak decreased in intensity with F-doping, while for nonstoichiometric films, the opposite was observed. No such changes were visible in the C1s spectrum, confirming the role of O activation in the reaction. This thesis adds to the body of knowledge on the importance of charge transfer at the metal-oxide interface in shaping the reactivity of heterogeneous catalysts, and provides examples of how this can be the basis for new methods to tune reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mass loading at Titan and comets

Present understanding of the cometary mass loading process (the addition of newborn ions to high speed magnetized plasma flows) is explored and the cometary lesson is applied to the environment of Titan. Mass loading is the dominant physical process controlling the interaction of the solar wind with comets, and it might play an important role in the interaction of Titan's neutral torus and exosphere with Saturn's magnetosphere. Freshly born ions follow cycloidal trajectories, resulting from the superposition of gyration and E/B drift. In the plasma frame, the resulting velocity space distribution is a ring beam distribution at comets and a ring distribution at Titan. This difference in free energy is expected to generate significantly different levels of low frequency broad band electromagnetic turbulence and, thus, result in important differences in the implanted ion distributions. It is predicted that mass loading creates a hot, equatorially trapped plasma population at Titan.

Gombosi, Tamas I.↗

Pattern-Recognition Algorithm for Locking Laser Frequency

A computer program serves as part of a feedback control system that locks the frequency of a laser to one of the spectral peaks of cesium atoms in an optical absorption cell. The system analyzes a saturation absorption spectrum to find a target peak and commands a laser-frequency-control circuit to minimize an error signal representing the difference between the laser frequency and the target peak. The program implements an algorithm consisting of the following steps: Acquire a saturation absorption signal while scanning the laser through the frequency range of interest. Condition the signal by use of convolution filtering. Detect peaks. Match the peaks in the signal to a pattern of known spectral peaks by use of a pattern-recognition algorithm. Add missing peaks. Tune the laser to the desired peak and thereafter lock onto this peak. Finding and locking onto the desired peak is a challenging problem, given that the saturation absorption signal includes noise and other spurious signal components; the problem is further complicated by nonlinearity and shifting of the voltage-to-frequency correspondence. The pattern-recognition algorithm, which is based on Hausdorff distance, is what enables the program to meet these challenges.

Karayan, Vahag↗

Frequency Multiplexed Radio Frequency Identification

A radio frequency identification (RFID) system for frequency multiplexing includes, in an exemplary embodiment, an RFID interrogator configured for generating an RFID signal, wherein a channel frequency of the RFID signal changes over time within an operating bandwidth; and one or more electromagnetic transmissive elements each extending between a first end thereof and a second end thereof, each of the electromagnetic transmissive elements electrically coupled with the RFID interrogator at the first end thereof, each of the electromagnetic transmissive elements comprising a frequency dependent load at the second end thereof and configured for transmitting the RFID signal from the RFID interrogator to the frequency dependent load, wherein the frequency dependent load presents different electromagnetic characteristics to the RFID signal transmitted to the frequency dependent load depending on the channel frequency of the RFID signal. Other embodiments include a method for frequency multiplexing including similar components.

Fink, Patrick W.↗

Time scale algorithm: Definition of ensemble time and possible uses of the Kalman filter

The comparative study of two time scale algorithms, devised to satisfy different but related requirements, is presented. They are ALGOS(BIPM), producing the international reference TAI at the Bureau International des Poids et Mesures, and AT1(NIST), generating the real-time time scale AT1 at the National Institute of Standards and Technology. In each case, the time scale is a weighted average of clock readings, but the weight determination and the frequency prediction are different because they are adapted to different purposes. The possibility of using a mathematical tool, such as the Kalman filter, together with the definition of the time scale as a weighted average, is also analyzed. Results obtained by simulation are presented.

Tavella, Patrizia↗

Characterization of Turbulence in the Mars Plasma Environment with MAVEN Observations

We characterize turbulence in the Mars plasma environment in a global scale for the first time by computing spectral indices for magnetic field fluctuations (slopes in the magnetic field power spectra) and determining how they vary with frequency and in different regions. In the magnetosheath, unlike in the solar wind, we find an absence of the inertial range which has a spectral index value equal to the Kolmogorov scaling value of minus 5 divided by 3. Instead, as observed in the magnetosheaths of other planets, we find that the spectral indices transition from low negative values close to minus 0.5 at low frequencies (less than proton gyrofrequency) to values much lower than minus 5 divided by 3 at high frequencies (greater than proton gyrofrequency). This indicates that the pristine solar wind is modified at the Martian bow shock and that the fluctuations are dominated by locally generated fluctuations in the magnetosheath. The absence of spectral indices with the Kolmogorov scaling value indicates that the fluctuations in the magnetosheath do not have sufficient time to interact with one another leading to a fully developed energy cascade. Spectral index values near the Kolmogorov scaling value are observed for the low-frequency range near the magnetic pileup boundary, and this indicates the presence of fully developed energy cascade. In the wake, we find that the spectral indices have approximately the same values, typically near minus 2, for both the low- and high-frequency ranges. We observe seasonal variations of the spectral indices, mainly in the upstream region, which indicate the seasonal variations of the proton cyclotron waves.

Magnetosheath↗

Characterizing the effect of incrementally increasing dry bulb temperature on linear and nonlinear measures of heart rate variability in nonpregnant, mid-gestation, and late-gestation sows

Abstract Characterizing the sow physiological response to an increased heat load is essential for effective heat stress mitigation. The study objective was to characterize the effects of a 400-min heating episode on sow heart rate variability (HRV) at different reproductive stages. HRV is a commonly used noninvasive proxy measure of autonomic function. Twenty-seven sows were enrolled in the study according to their gestation stage at time of selection: 1) nonpregnant (NP; n = 7), 2) mid-gestation (MID; 57.3 ± 11.8 d gestation; n = 11), and 3) late-gestation (LATE; 98.8 ± 4.9 d gestation; n = 8). The HRV data utilized in the study were collected from each pig as the dry bulb temperature in the room increased incrementally from 19.84 ± 2.15 °C to 35.54 ± 0.43 °C (range: 17.1–37.5 °C) over a 400-min period. After data collection, one 5-min set of continuous heart rate data were identified per pig for each of nine temperature intervals (19–20.99, 21–22.99, 23–24.99, 25–26.99, 27–28.99, 29–30.99, 31–32.99, 33–34.99, and 35–36.99 °C). Mean inter-beat interval length (RR), standard deviation of r-r intervals (SDNN), root mean square of successive differences (RMSSD), high frequency spectral power (HF), sample entropy (SampEn), short-term detrended fluctuation analysis (DFAα1), and three measures (%REC, DET, LMEAN) derived from recurrence quantification analysis were calculated for each data set. All data were analyzed using the PROC GLIMMIX procedure in SAS 9.4. Overall, LATE sows exhibited lower RR than NP sows (P < 0.01). The standard deviation of r–r intervals and RMSSD differed between each group (P < 0.01), with LATE sows exhibiting the lowest SDNN and RMSSD and NP sows exhibiting the greatest SDNN and RMSSD. Late-gestation sows exhibited lower HF than both MID and NP sows (P < 0.0001), greater DFA values than NP sows (P = 0.05), and greater DET compared to MID sows (P = 0.001). Late-gestation also sows exhibited greater %REC and LMEAN compared to MID (P < 0.01) and NP sows (all P < 0.01). In conclusion, LATE sows exhibited indicators of greater autonomic stress throughout the heating period compared to MID and NP sows. However, temperature by treatment interactions were not detected as dry bulb increased. Future studies are needed to fully elucidate the effect of gestational stage and increasing dry bulb temperature on sow HRV.

Agriculture↗

Digital Receiver Phase Meter

The software of a commercially available digital radio receiver has been modified to make the receiver function as a two-channel low-noise phase meter. This phase meter is a prototype in the continuing development of a phase meter for a system in which radiofrequency (RF) signals in the two channels would be outputs of a spaceborne heterodyne laser interferometer for detecting gravitational waves. The frequencies of the signals could include a common Doppler-shift component of as much as 15 MHz. The phase meter is required to measure the relative phases of the signals in the two channels at a sampling rate of 10 Hz at a root power spectral density <5 microcycle/(Hz)1/2 and to be capable of determining the power spectral density of the phase difference over the frequency range from 1 mHz to 1 Hz. Such a phase meter could also be used on Earth to perform similar measurements in laser metrology of moving bodies. To illustrate part of the principle of operation of the phase meter, the figure includes a simplified block diagram of a basic singlechannel digital receiver. The input RF signal is first fed to the input terminal of an analog-to-digital converter (ADC). To prevent aliasing errors in the ADC, the sampling rate must be at least twice the input signal frequency. The sampling rate of the ADC is governed by a sampling clock, which also drives a digital local oscillator (DLO), which is a direct digital frequency synthesizer. The DLO produces samples of sine and cosine signals at a programmed tuning frequency. The sine and cosine samples are mixed with (that is, multiplied by) the samples from the ADC, then low-pass filtered to obtain in-phase (I) and quadrature (Q) signal components. A digital signal processor (DSP) computes the ratio between the Q and I components, computes the phase of the RF signal (relative to that of the DLO signal) as the arctangent of this ratio, and then averages successive such phase values over a time interval specified by the user.

Marcin, Martin↗

Spectral Characteristics of Daily to Seasonal Ground Motion at the Piñon Flats Observatory from Coherence of Seismic Data

We investigate coherences of seismic data recorded during three years (2015–2017) at the Piñon Flats Observatory (PY) array and a collocated 148 m deep borehole station B084, along with oceanic data from a buoy southwest of the PY array. Seismic and barometric recordings at PY stations are analyzed with a multitaper spectral technique. The coherence of signals from seismic sources is >0.6 at 0.05–8 Hz between closely spaced (<65m) surface stations and decreases to ~0.2 in frequency bands in which the wavelengths are smaller than interstation distances. There are several local coherence increases at 1–8 Hz between nearby (<65 m) surface stations, whereas large coherence values between a surface and 148 m deep borehole stations are only present at the secondary microseism (~0.14 Hz). These points to significant modification of seismic recordings in the top crust, and those continual near-surface failures might produce shallow rapidly attenuating signals at surface stations. Incoherent local atmospheric effects induce incoherent seismic signals in low- and high-frequency ranges through different coupling mechanisms. Between 0.003 and 0.05 Hz, atmospheric loadings generate ground tilts that contaminate the two horizontal seismic recordings and decrease their coherence, whereas the vertical component is less affected. At 1–8 Hz, coupling of atmospheric pressure with surface structures transmits incoherent signals into the ground, degrading the seismic coherence in all three components. The two horizontal coherences show seasonal variations with extended coherent frequency bands in winter and spring, likely to be produced by seasonal variations in microseisms and local ground tilts. The coherences also contain high anomalies between 2 and 4 Hz resulting from anthropogenic activities. The results provide useful information on instrument characteristics and variations in the shallow crustal response to earthquakes, seasonal and ambient sources of seismic energy, along with atmospheric pressure–temperature changes and anthropogenic activities.

Geochemistry & Geophysics↗

Research on micro-sized acoustic bandgap structures.

Phononic crystals (or acoustic crystals) are the acoustic wave analogue of photonic crystals. Here a periodic array of scattering inclusions located in a homogeneous host material forbids certain ranges of acoustic frequencies from existence within the crystal, thus creating what are known as acoustic (or phononic) bandgaps. The vast majority of phononic crystal devices reported prior to this LDRD were constructed by hand assembling scattering inclusions in a lossy viscoelastic medium, predominantly air, water or epoxy, resulting in large structures limited to frequencies below 1 MHz. Under this LDRD, phononic crystals and devices were scaled to very (VHF: 30-300 MHz) and ultra (UHF: 300-3000 MHz) high frequencies utilizing finite difference time domain (FDTD) modeling, microfabrication and micromachining technologies. This LDRD developed key breakthroughs in the areas of micro-phononic crystals including physical origins of phononic crystals, advanced FDTD modeling and design techniques, material considerations, microfabrication processes, characterization methods and device structures. Micro-phononic crystal devices realized in low-loss solid materials were emphasized in this work due to their potential applications in radio frequency communications and acoustic imaging for medical ultrasound and nondestructive testing. The results of the advanced modeling, fabrication and integrated transducer designs were that this LDRD produced the 1st measured phononic crystals and phononic crystal devices (waveguides) operating in the VHF (67 MHz) and UHF (937 MHz) frequency bands and established Sandia as a world leader in the area of micro-phononic crystals.

42 ENGINEERING↗

High-performance packaging for monolithic microwave and millimeter-wave integrated circuits

Packaging schemes were developed that provide low-loss, hermetic enclosure for advanced monolithic microwave and millimeter-wave integrated circuits (MMICs). The package designs are based on a fused quartz substrate material that offers improved radio frequency (RF) performance through 44 gigahertz (GHz). The small size and weight of the packages make them appropriate for a variety of applications, including phased array antenna systems. Packages were designed in two forms; one for housing a single MMIC chip, the second in the form of a multi-chip phased array module. The single chip array module was developed in three separate sizes, for chips of different geometry and frequency requirements. The phased array module was developed to address packaging directly for antenna applications, and includes transmission line and interconnect structures to support multi-element operation. All packages are fabricated using fused quartz substrate materials. As part of the packaging effort, a test fixture was developed to interface the single chip packages to conventional laboratory instrumentation for characterization of the packaged devices. The package and test fixture designs were both developed in a generic sense, optimizing performance for a wide range of possible applications and devices.

Shalkhauser, K. A.↗

Multipactor theory for multicarrier signals

This work presents a new theory of multipactor under multicarrier signals for parallel-plate geometries, assuming a homogeneous electric field and one-dimensional electron motion. It is the generalization of the nonstationary multipactor theory for single-carrier signals [S. Anza et al.,Phys. Plasmas 17, 062110 (2010)]. It is valid for multicarrier signals with an arbitrary number of carriers with different amplitude, arbitrary frequency, and phase conditions and for any material coating. This new theory is able to model the real dynamics of the electrons during the multipactor discharge for both single and double surface interactions. Among other parameters of the discharge, it calculates the evolution in time of the charge growth, electron absorption, and creation rates as well as the instantaneous secondary emission yield and order. An extensive set of numerical tests with particle-in-cell software has been carried out in order to validate the theory under many different conditions. This theoretical development constitutes the first multipactor theory which completely characterizes the multipactor discharge for arbitrary multicarrier signals, setting the first step for further investigations in the field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stability and control of power systems with high penetrations of inverter-based resources: An accessible review of current knowledge and open questions

As power system renewable energy penetrations increase, the ways in which key renewable technologies such as wind and solar photovoltaics (PV) differ from thermal generators become more apparent. Many studies have examined the variability and uncertainty of such generators and described how generation and load can be balanced for a wide variety of annual energy penetrations, at timescales from seconds to years. Another important characteristic of these resources is asynchronicity, the result of using inverters to interface the prime energy source with the power system as opposed to synchronous generators. Unlike synchronous generators, whose frequency of alternating current (AC) injection is physically coupled to the rotation of the machine itself, inverter based asynchronous generators do not share the same physical coupling with the generated frequency. These subtle differences impact the operations of power systems developed around the characteristics of synchronous generators. In this paper we review current knowledge and open research questions concerning the interplay between asynchronous inverter-based resources (IBRs) and cycle- to second-scale power system dynamics, with a focus on how stability and control may be impacted or need to be achieved differently when there are high instantaneous penetrations of IBRs across an interconnection. This work does not seek to provide a comprehensive review of the latest developments, but is instead intended to be accessible to any reader with an engineering background and an interest in power systems and renewable energy. As such, the paper includes basic material on power electronics, control schemes for IBRs, and power system stability; and uses this background material to describe potential impacts of IBRs on power system stability, operational challenges associated with large amounts of distributed IBR generation, and modern power system simulation trends driven by IBR characteristics.

14 SOLAR ENERGY↗

Transit time instabilities in an inverted fireball. II. Mode jumping and nonlinearities

A fireball is formed inside a highly transparent spherical grid immersed in a dc discharge plasma. The ambient plasma acts as a cathode and the positively biased grid as an anode. A strong nearly current-free double layer separates the two plasmas. Electrons are accelerated into the fireball, ionize, and establish a discharge plasma with plasma potential near the grid potential. Ions are ejected from the fireball. Since electrons are lost at the same rate as ions, most electrons accelerated into the fireball just pass through it. Thus, the electron distribution contains radially counterstreaming electrons. High-frequency oscillations are excited with rf period given by the electron transit time through the fireball. Since the frequency is well below the electron plasma frequency, no eigenmodes other than a beam space-charge wave exists. The instability is an inertial transit-time instability similar to the sheath-plasma instability or the reflex vircator instability. In contrast to vircators, there is no electron reflection from a space-charge layer but counterstreaming arises from spherical convergence and divergence of electrons. While the basic instability properties have been presented in a companion paper [R. L. Stenzel et al., Phys. Plasmas 18, 012104 (2011)], the present paper focuses on observed mode jumping and nonlinear effects. The former produce frequency jumps and different potential profiles, the latter produce harmonics associated with electron bunching at large amplitudes. In situ probe measurements are presented and interpreted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vibration responses of h-BN sheet to charge doping and external strain

Based on density functional theory and density functional perturbation theory calculations, we systematically investigate the vibration responses of h-BN sheet to charge doping and external strains. It is found that under hole doping, the phonon frequencies of the ZO and TO branches at different wave vector q shift linearly with different slopes. Under electron doping, although the phonon frequencies shift irregularly, the shifting values are different at different phonon wave vectors. Interestingly, we find that external strain can restrain the irregular vibration responses of h-BN sheet to electron doping. The critical factor is revealed to be the relative position of the nearly free electron and boron p{sub z} states of h-BN sheet. Under external strains, the vibration responses of h-BN sheet are also found to be highly dependent on the phonon branches. Different vibration modes at different q points are revealed to be responsible for the vibration responses of h-BN sheet to charge doping and external strain. Our results point out a new way to detect the doping or strain status of h-BN sheet by measuring the vibration frequencies at different wave vector.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Changes in a suite of indicators of extreme temperature and precipitation under 1.5 and 2 degrees warming

Following the 2015 Paris agreement, the Intergovernmental Panel on Climate Change was tasked with assessing climate change impacts and mitigation options for a world that limits warming to 1.5 &deg;Cina special report. To aid the scientific assessment process three low-warming ensembles were generated over the 21st century based on the Paris targets using NCAR-DOE community model, CESM1-CAM5. This study used those simulation results and computed ten extreme climate indices, from deinitions created by the Expert Team on Climate Change Detection and Indices, to determine if the three different scenarios cause different intensity and frequency of extreme precipitation or temperature over the 21 st century. After computing the indices, statistical tests were used to determine if significant changes affect their characteristics. It was found that at the grid point level significant changes emerge in all scenarios, for nearly all indices. The temperature indices show widespread significant change, while the behavior of precipitation indices reflects the larger role that internal variability plays, even by the end of the century. Nonetheless differences can be assessed, in substantial measure for many of these indices: changes in nearly all indices have a strong correlation to global mean temperature, so that scenarios and times with greater temperature change experience greater index changes for many regions. This is particularly true of the temperature-related indices, but can be assessed for some regions also for the indices related to precipitation intensity. These results thus show that even for scenarios that are separated by only half of a degree in global average temperature, the statistics of extremes are significantly different.

54 ENVIRONMENTAL SCIENCES↗

Increased Treadmill Running and Lower-Body Resistance Training Intensity May Attenuate Aerobic Capacity Loss During Spaceflight

BACKGROUND: In-flight exercise training is the primary countermeasure to mitigate spaceflight-induced decrements in strength and aerobic capacity. Despite high-quality exercise capabilities and prescriptions aboard the International Space Station (ISS), most astronauts experience strength and aerobic capacity loss; however, significant individual variability exists. Recent findings suggest that greater in-flight running (i.e., distance per session) and lower-body resistance exercise intensity (i.e., load relative to body weight) help preserve strength. Whether similar variables contribute to the preservation of aerobic capacity during spaceflight is unknown. METHODS: A NASA database of exercise performance metrics was used to identify long-duration (≥ 90 days) ISS crew who completed pre- and post-flight aerobic capacity testing (VO2peak, cycle ergometry, n = 44). “Responders” (R) were classified as those that maintained or improved VO2peak (n = 13; 1.4 ± 3.3%), and “non-responders” (NR) were those with the most severe decrements (n = 13; -20.0 ± 3.4%) from pre- to post-flight. In-flight exercise records (cycling, treadmill, resistance exercise) were aggregated across flight weeks. Independent t-tests or Mann-Whitney U tests were used to compare training variables (i.e., frequency, time, intensity, volume) between R and NR. RESULTS: Consistent with the variables contributing to strength protection, in-flight running distance (R: 5.0 ± 0.7; NR: 4.2 ± 1.0 km/session, p = 0.020) and lower-body resistance exercise intensity (R: 110.9 ± 27.3; NR: 91.7 ± 16.5% body weight, p = 0.040) were greater in R than NR. Active running time was also greater in R than NR (R: 101.1 ± 20.4; NR: 82.3 ± 23.5 min/wk; p = 0.039). However, no group differences in cycling frequency, intensity, or time, as well as upper body or core resistance exercise intensity, volume, or frequency were observed. CONCLUSIONS: Although physiologically distinct stimuli, the exercise training variables contributing to the preservation of both strength and aerobic capacity during microgravity exposure appear to be consistent. Increased running time and distance, but not cycling, combined with higher-intensity lower-body resistance exercise, may help mitigate losses in both aerobic capacity and strength during long-duration spaceflight.

Alyssa N Varanoske↗