Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed databases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Strain Gage Loads Calibration Testing of the Active Aeroelastic Wing F/A-18 Aircraft

This report describes strain-gage calibration loading through the application of known loads of the Active Aeroelastic Wing F/A-18 airplane. The primary goal of this test is to produce a database suitable for deriving load equations for left and right wing root and fold shear; bending moment; torque; and all eight wing control-surface hinge moments. A secondary goal is to produce a database of wing deflections measured by string potentiometers and the onboard flight deflection measurement system. Another goal is to produce strain-gage data through both the laboratory data acquisition system and the onboard aircraft data system as a check of the aircraft system. Thirty-two hydraulic jacks have applied loads through whiffletrees to 104 tension-compression load pads bonded to the lower wing surfaces. The load pads covered approximately 60 percent of the lower wing surface. A series of 72 load cases has been performed, including single-point, double-point, and distributed load cases. Applied loads have reached 70 percent of the flight limit load. Maximum wingtip deflection has reached nearly 16 in.

Lokos, William A.↗

Resilience Assessment Framework For Electric Distribution Systems Performance Under Extreme Conditions

The devastating impact of extreme weather-related events is increasingly evident on power grids, especially on distribution grids. The severity of their potential impact calls for 1) developing a suitable resilience assessment framework to capture the system performance and 2) assessing relevant mitigative strategies to lessen the impact of such events. This paper proposes a framework to identify grid vulnerabilities using the energy-at-risk concept to select, disconnect and isolate grid portions due to a resilience event. The proposed framework mainly consists of two steps; i) processing the utility's available infrastructure, i.e., a network model, possible switching combinations, and outage information for those combinations, as a graph-based database, and ii) implementing a novel optimal switching algorithm leveraging database and grid simulated metrics. These switching actions are generated to implement load curtailment in a rolling manner during anticipated grid scarcity conditions. In this study, a test case is created using two taxonomy feeders and is simulated against an extreme temperature event, e.g., a long, relatively cold, and prolonged freeze peak, thereby creating stress on the grid. It is demonstrated that the proposed framework allows utilities to predict the energy-at-risk during such resilience events and design suitable outage management strategies.

Poudel, Shiva↗

Atomic Data and Spectral Line Intensities for Ni XI

Electron impact collision strengths, energy levels, oscillator strengths and spontaneous radiative decay rates are calculated for Ni XI. We include in the calculations the 10 lowest configurations, corresponding to 164 fine structure levels: 3s(sup 2)3p(sup 6), 3s(sup 2)3p(sup 5)3d, 3s(sup 2)3p(sup 4)3d(sup 2), 3s3p(sup 6)3d, 3s(sup 2)3p(sup 5)4l and 3s3p6 4l with l =.s, p, d. Collision strengths are calculated at five incident energies for all transitions: 7.1, 16.8, 30.2, 48.7 and 74.1 Ry above the threshold of each transition. An additional energy, very close to the transition threshold, has been added, whose value is between 0.06 Ry and 0.25 Ry depending on the lower level. Calculations have been carried out using the Flexible Atomic Code and the distorted wave approximation. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates of the present work, combined with Close Coupling collision excitation rate coefficient available in the literature for the lowest 17 levels, statistical equilibrium equations for level populations are solved at electron densities covering the 10(exp 8)-10(exp 14) cu cm range and at an electron temperature of logT(sub c)(K)=6.1, corresponding to the maximum abundance of Ni XI. Spectral line intensities are calculated, and their diagnostic relevance is discussed. This dataset will be made available in the next version of the CHIANTI database.

Bhatia, A. K.↗

Data augmentation for disruption prediction via robust surrogate models

The goal of this work is to generate large statistically representative data sets to train machine learning models for disruption prediction provided by data from few existing discharges. Such a comprehensive training database is important to achieve satisfying and reliable prediction results in artificial neural network classifiers. Here, we aim for a robust augmentation of the training database for multivariate time series data using Student t process regression. We apply Student t process regression in a state space formulation via Bayesian filtering to tackle challenges imposed by outliers and noise in the training data set and to reduce the computational complexity. Thus, the method can also be used if the time resolution is high. We use an uncorrelated model for each dimension and impose correlations afterwards via colouring transformations. We demonstrate the efficacy of our approach on plasma diagnostics data of three different disruption classes from the DIII-D tokamak. To evaluate if the distribution of the generated data is similar to the training data, we additionally perform statistical analyses using methods from time series analysis, descriptive statistics and classic machine learning clustering algorithms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Prediction of hydrogen adsorption in nanoporous materials from the energy distribution of adsorption sites

We present a fast and accurate, semi-analytical method for predicting hydrogen adsorption in nanoporous materials. For any temperature and pressure, the adsorbed amount is calculated as an integral over the energy density of adsorption sites (guest-host interactions) plus an average guest-guest term. The guest-host interaction energy is calculated using a classical force field with hydrogen modelled as a single-site probe. The guest-guest interaction energy is approximated using an average coordination number, which is regressed using Gaussian Process Regression (GPR). Local adsorption at each site is then modelled using a Langmuir isotherm, which when weighted with its probability density gives an accurate description of hydrogen adsorption. The method is tested on 933 metal-organic frameworks (MOFs) from the Computation-Ready Experimental (CoRE) MOF database at 77 K from 10 –5 to 100 bar, and the results are compared against GCMC predictions. To demonstrate the utility of the method, we calculated hydrogen adsorption isotherms for 12,914 existing MOF structures, at two different temperatures at a speed about 100 times that of GCMC simulations and analyzed the results. Here, we found 13 MOFs with predicted deliverable capacities exceeding the DOE target of 50 g/L for adsorption at 100 bar, 77 K and desorption at 5 bar, 160 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The use of haptic interfaces and web services in crystallography: an application for a `screen to beam' interface

Haptic interfaces have become common in consumer electronics. They enable easy interaction and information entry without the use of a mouse or keyboard. Our work illustrates the application of a haptic interface to crystallization screening in order to provide a natural means for visualizing and selecting results. By linking this to a cloud-based database and web-based application program interface, the same application shifts the approach from `point and click' to `touch and share', where results can be selected, annotated and discussed collaboratively. Furthermore, in the crystallographic application, given a suitable crystallization plate, beamline and robotic end effector, the resulting information can be used to close the loop between screening and X-ray analysis, allowing a direct and efficient `screen to beam' approach. The application is not limited to the area of crystallization screening; `touch and share' can be used by any information-rich scientific analysis and geographically distributed collaboration.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Global transpiration data from sap flow measurements: the SAPFLUXNET database

Plant transpiration links physiological responses of vegetation to water supply and demand with hydrological, energy, and carbon budgets at the land–atmosphere interface. However, despite being the main land evaporative flux at the global scale, transpiration and its response to environmental drivers are currently not well constrained by observations. Here we introduce the first global compilation of whole-plant transpiration data from sap flow measurements (SAPFLUXNET, https://sapfluxnet.creaf.cat/, last access: 8 June 2021). We harmonized and quality-controlled individual datasets supplied by contributors worldwide in a semi-automatic data workflow implemented in the R programming language. Datasets include sub-daily time series of sap flow and hydrometeorological drivers for one or more growing seasons, as well as metadata on the stand characteristics, plant attributes, and technical details of the measurements. SAPFLUXNET contains 202 globally distributed datasets with sap flow time series for 2714 plants, mostly trees, of 174 species. SAPFLUXNET has a broad bioclimatic coverage, with woodland/shrubland and temperate forest biomes especially well represented (80 % of the datasets). The measurements cover a wide variety of stand structural characteristics and plant sizes. The datasets encompass the period between 1995 and 2018, with 50 % of the datasets being at least 3 years long. Accompanying radiation and vapour pressure deficit data are available for most of the datasets, while on-site soil water content is available for 56 % of the datasets. Many datasets contain data for species that make up 90 % or more of the total stand basal area, allowing the estimation of stand transpiration in diverse ecological settings. SAPFLUXNET adds to existing plant trait datasets, ecosystem flux networks, and remote sensing products to help increase our understanding of plant water use, plant responses to drought, and ecohydrological processes. SAPFLUXNET version 0.1.5 is freely available from the Zenodo repository (https://doi.org/10.5281/zenodo.3971689; Poyatos et al., 2020a). The “sapfluxnetr” R package – designed to access, visualize, and process SAPFLUXNET data – is available from CRAN.

58 GEOSCIENCES↗

Design document for the MOODS Data Management System (MDMS), version 1.0

The MOODS Data Management System (MDMS) provides access to the Master Oceanographic Observation Data Set (MOODS) which is maintained by the Naval Oceanographic Office (NAVOCEANO). The MDMS incorporates database technology in providing seamless access to parameter (temperature, salinity, soundspeed) vs. depth observational profile data. The MDMS is an interactive software application with a graphical user interface (GUI) that supports user control of MDMS functional capabilities. The purpose of this document is to define and describe the structural framework and logical design of the software components/units which are integrated into the major computer software configuration item (CSCI) identified as MDMS, Version 1.0. The preliminary design is based on functional specifications and requirements identified in the governing Statement of Work prepared by the Naval Oceanographic Office (NAVOCEANO) and distributed as a request for proposal by the National Aeronautics and Space Administration (NASA).

Source record↗

Radio-science performance analysis software

The Radio Science Systems Group (RSSG) provides various support functions for several flight project radio-science teams. Among these support functions are uplink and sequence planning, real-time operations monitoring and support, data validation, archiving and distribution functions, and data processing and analysis. This article describes the support functions that encompass radio-science data performance analysis. The primary tool used by the RSSG to fulfill this support function is the STBLTY program set. STBLTY is used to reconstruct observable frequencies and calculate model frequencies, frequency residuals, frequency stability in terms of Allan deviation, reconstructed phase, frequency and phase power spectral density, and frequency drift rates. In the case of one-way data, using an ultrastable oscillator (USO) as a frequency reference, the program set computes the spacecraft transmitted frequency and maintains a database containing the in-flight history of the USO measurements. The program set also produces graphical displays. Some examples and discussions on operating the program set on Galileo and Ulysses data will be presented.

Morabito, D. D.↗

Remote Sensing of Rain

The first problem addressed concerns passive-microwave rain retrievals. Most current approaches start by building off-line a cloud-model-derived database. Given data, the retrieval algorithms search the database for the microwave temperatures "closest" to the observed data, then after some fine-tuning (performed in different ways by different implementations) the rain is estimated to be that which corresponds to the selected (and fine-tuned) set of database temperatures. These approaches have three drawbacks: they cannot properly take into account the ambiguities which arise from the fact that several rain scenarios can produce the same observed temperatures; they are quite inefficient since they require manipulating a large database along with often complex "fine-tuning" procedures; and they cannot refine their estimates if additional data is available. This past year we have derived closed formulae relating observed microwave brightness temperatures, T(sub b), and the underlying rain rates, R: average T(sub b) =f (rain) and average rain = g (T(sub b)), along with the corresponding covariance matrices. These results are sufficient to describe the conditional probabilities p(R/T(sub b)) and p(T(sub b)/R) to second order. Progress has also been made towards deriving a robust description of the rain drop size distribution (DSD). The widespread approach consisting in parameterizing the DSD as a gamma-distribution in terms of the drop diameter D suffers from the facts that, in reality, the DSD is not a smooth function of D and that the largely arbitrary Gamma model imposes unintended behavior, which has implications on any quantities derived from the DSD model. We have therefore developed a non-parametric yet practical description of the DSD, which is particularly well-suited for use in remote-sensing applications. The diagram on the left shows a comparison between an actual DSD sample and the truncated non-parametric representation. One figure shows the relation between radar reflectivity and rain rate derived using this representation. Validation of the Tropical Rainfall Measuring Mission (TRMM) radar-radiometer combined R and DSD algorithm is underway. This algorithm was designed to make optimal use of the instantaneous reflectivity profiles measured by the TRMM radar and the microwave brightness temperatures measured by the TRMM passive radiometer. So far, it appears to be the most reliable TRMM rain algorithm.

Haddad, Ziad S.↗

Testing of the Crew Exploration Vehicle in NASA Langley's Unitary Plan Wind Tunnel

As part of a strategic, multi-facility test program, subscale testing of NASA s Crew Exploration Vehicle was conducted in both legs of NASA Langley s Unitary Plan Wind Tunnel. The objectives of these tests were to generate aerodynamic and surface pressure data over a range of supersonic Mach numbers and reentry angles of attack for experimental and computational validation and aerodynamic database development. To provide initial information on boundary layer transition at supersonic test conditions, transition studies were conducted using temperature sensitive paint and infrared thermography optical techniques. To support implementation of these optical diagnostics in the Unitary Wind Tunnel, the experiment was first modeled using the Virtual Diagnostics Interface software. For reentry orientations of 140 to 170 degrees (heat shield forward), windward surface flow was entirely laminar for freestream unit Reynolds numbers equal to or less than 3 million per foot. Optical techniques showed qualitative evidence of forced transition on the windward heat shield with application of both distributed grit and discreet trip dots. Longitudinal static force and moment data showed the largest differences with Mach number and angle of attack variations. Differences associated with Reynolds number variation and/or laminar versus turbulent flow on the heat shield were very small. Static surface pressure data supported the aforementioned trends with Mach number, Reynolds number, and angle of attack.

Murphy, Kelly J.↗

Using the cFS Command and Data Dictionary (CCDD) to Automate Software Development on Habulous

Final paper is attached. The NASA developed Core Flight System (cFS) is a reusable software architecture that has been used on multiple spaceflight missions. By using this framework, missions are able to reuse code from other missions, as well as leverage deployment onto similar computer architectures (i.e. not "reinvent the wheel" on each new mission). The success in the cFS concept can be seen in the large number of projects using cFS at FSW-2018. The Habulous project is an Earth-based testbed, used for hardware and software that may one day be used on a future space habitat unit, with many participating groups from various NASA centers and aerospace organizations around the country. The distributed nature of the various teams mean that defining (and following) an interface definition is critical on the project. Additionally, since various groups use various types of computer hardware (32/64-bit, big/little endian, Linux/VxWorks/Windows) many additional complications exist in interfacing all the various components into a final integrated system. cFS is used on the majority the flight software (FSW) in running in Habulous. But some subsystems have elected to not use cFS, and use a software bridge (called SBN_lib) to interact with the other cFS nodes in Habulous. In order to most efficiently develop the FSW, a central database is used to define and store each message sent by cFS. A Command and Data Dictionary (CDD) is something nearly universal on spacecraft, but as a team we worked to develop the CDD before the SW development was complete, and not treat it like "as built" documentation. To manage the CDD, the cFS Command and Data Dictionary (CCDD) tool was chosen (available from NASA as open source software). The CCDD tool has successfully been used to automate/autocode a large amount of software used on Habulous, as we are hoping to use it to define even more items in the future (time-triggered Ethernet (TTE) network maps, CPU scheduling). Additionally, Habulous has been exploring the use of cFS on wildly heterogeneous CPUs, and how to coordinate all those various machines using/extending the software bus – network (SBN) application in cFS, as well as TTE to coordinate message passing between various synchronized machines. The major topics to be covered in the presentation are: (1) Updating to the CCSDS_v2 extended headers (and using CPU# as subsystem ID). (2) Managing all the message identification numbers for each cFS message sent/received on any of the various CPUs. (3) Using the CCDD information to automatically generate the C-header files that define the structure for all software bus (SB) commands/telemetry messages. (4) Using the CCDD to automatically generate XML Telemetry and Command Exchange (XTCE) files, which streams display production/integration/testing in a web based display architecture (5) Extending/customizing SBN to pass messages among computers on multiple networks. (6) Using "Protobetter" inside SBN to manage different endian-ness/architectures. (7) Using SBN_lib to allow non-cFS node to communicate with cFS nodes. (8) Developing TTE network and schedule tables for all the various CPUs to use.

Hirsh, Robert L.↗

Millimeter-wave Detections of Symbiotic Stars in SPT and ACT Data

We present the results of a joint targeted search of candidate symbiotic stars at millimeter wavelengths using the South Pole Telescope (SPT) and the Atacama Cosmology Telescope (ACT). Candidates are selected from the New Online Database of Symbiotic Variables, restricting to objects that are within either the SPT-3G or ACT~DR6 footprint, covering most of the southern hemisphere and up to a declination of $+20^\circ$. Forced photometry on the 828 candidate symbiotic star locations in SPT and ACT data results in 31 unique objects detected with more than a $3σ$ significance using two frequency bands: 18 confirmed and 13 suspected symbiotic stars. We provide the SPT and ACT 95/98, 150, and 220~GHz light curves, along with optical and infrared light curves from 2016--2026, as well as spectral energy distributions, physical parameters from the literature, and brief summaries regarding the nature of each individual object. Using Herschel SPIRE data from 2013, we place upper limits on millimeter flux for CN Cha near the beginning of the optical rise in its 2012/2013 nova, which suggests a strong variability and lag at millimeter wavelengths and results in a rare observance of a Galactic millimeter slow transient. In addition, we provide coadded thumbnails and light curves for the remaining 797 candidate symbiotic stars that did not pass our detection thresholds. Millimeter-wave emission from symbiotic stars is primarily a combination of free-free emission of the ionization region and optically thick blackbody emission of the cooler dust components of the system. When combined with contemporaneous multi-wavelength observations, millimeter-wave observations can be used to test binary models of symbiotic stars and provide insight on the geometry and physical properties of these systems.

Tandoi, C. [Illinois U., Urbana, Astron. Dept.] (O↗

Venus' impact-crater database: Update to approximately 98 percent of the planet's surface

A total of 912 impact craters between 1.5 and 280 km in diameter have now been identified on about 98% of Venus' surface. This total includes an additional 71 craters (mostly in the southern hemisphere) not in the crater inventory given in Schaber et al. for 89% of the planet. (Extrapolated to 100% of the surface, the inventory should consist of 930 craters greater than 1.5 km in diameter.) The total crater inventory for 98% of the planet is only slightly larger (912 versus 882) than that extrapolated from the inventory of 135 craters when only 15% of the planet had been mapped by Magellan. The remarkably consistent density of about 2.02 impact craters per 10(exp 6) sq km emphasizes the completely random nature of the crater population's distribution. About 400 craters recognized from Magellan mapping have been assigned names.

Schaber, Gerald G.↗

Atomic data and spectral line intensities for Ni XI

Electron impact collision strengths, energy levels, oscillator strengths, and spontaneous radiative decay rates are calculated for Ni XI. We include in the calculations the 12 lowest configurations, corresponding to 180 fine-structure levels: 3s{sup 2}3p{sup 6}, s{sup 2}3p{sup 5}3d, 3s{sup 2}3p{sup 4}3d{sup 2}, 3s3p{sup 6}3d, 3s{sup 2}3p{sup 5}4l, and 3s3p{sup 6}4l with l = s, p, d, f. Collision strengths are calculated at five incident energies for all transitions: 7.45, 17.6, 31.4, 50.1, and 75.2 Ry above the threshold of each transition. An additional energy, very close to the transition threshold, has been added, whose value is between 0.0007 Ry and 0.25 Ry depending on the levels involved. Calculations have been carried out using the Flexible Atomic Code. The scattering problem is solved in the distorted wave approximation. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates of the present work, combined with close coupling collision excitation rate coefficients available in the literature for the lowest 17 levels, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10{sup 8}-10{sup 14} cm{sup -3} and at an electron temperature of logT{sub e}K=6.1, corresponding to the maximum abundance of Ni XI. Spectral line intensities are calculated, and their diagnostic relevance is discussed. This dataset will be made available in the next version of the CHIANTI database.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

FAINT UBVRI STANDARD STAR FIELDS

High-quality CCD-based UBVRI photometry is presented for ∼45, 000 stars distributed among 60 different fields centered on the celestial equator and at δ ≈ –50°. This photometry has been calibrated to the standard Johnson UBV and Kron-Cousins RI systems via observations of the UBVRI standard stars presented in the works of Landolt. The majority of the stars in our photometric catalog fall in the magnitude range 12 ∼< V ∼< 22 and in the color range –0.3 ∼< (B – V) ∼< 1.8. Each star averages 67 measures in each UBVRI filter from data taken on 250 different photometric nights over a period of ∼6.5 yr from two different telescopes. Our final photometric database effectively extends the UBVRI standard star network defined by Landolt to much fainter magnitudes and increases the number density of stars within pre-existing standard fields. Hence, these new, fainter standards serve as suitable calibrators for investigators who employ either small or large-aperture telescopes for their observational projects.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterization of PTO and Idle Behavior for Utility Vehicles

This report presents the results of analyses performed on utility vehicle data composed primarily of aerial lift bucket trucks sampled from the National Renewable Energy Laboratory's Fleet DNA database to characterize power takeoff (PTO) and idle operating behavior for utility trucks. Two major data sources were examined in this study: a 75-vehicle sample of Odyne electric PTO (ePTO)-equipped vehicles drawn from multiple fleets spread across the United States and 10 conventional PTO-equipped Pacific Gas and Electric fleet vehicles operating in California. Novel data mining approaches were developed to identify PTO and idle operating states for each of the datasets using telematics and controller area network/onboard diagnostics data channels. These methods were applied to the individual datasets and aggregated to develop utilization curves and distributions describing PTO and idle behavior in both absolute and relative operating terms. This report also includes background information on the source vehicles, development of the analysis methodology, and conclusions regarding the study's findings.

54 ENVIRONMENTAL SCIENCES↗

NESSUS/expert and NESSUS/FPI in the Probabilistic Structural Analysis Methods (PSAM) program

The Numerical Evaluation of Stochastic Structures under Stress (NESSUS) is the primary computer code being developed in the NASA Probabilistic Structural Analysis Methods (PSAM) project. It consists of four modules NESSUS/EXPERT, NESSUS/FPI, NESSUS/PRE and NESSUS/FEM. This presentation concentrates on EXPERT and FPI. To provide an effective interface between NESSUS and the user, an expert system module called NESSUS/EXPERT is being developed. That system uses the CLIPS artificial intelligence code developed to NASA-JSC. The code is compatible with FORTRAN, the standard language for codes in PSAM. The user interacts with the CLIPS inference engine, which is linked to the knowledge database. The perturbation database generated by NESSUS/FEM and managed in EXPERT is used to develop the so-called response or performance model in the random variables. Two independent probabilistic methods are available in PSAM for the computation of the probabilistic structural response. These are the Fast Probability Integration (FPI) method and Monte Carlo simulation. FPI is classified as an advanced reliability method and has been developed over the past ten years by researchers addressing the reliability of civil engineering structures. Monte Carlo is a well-established technique for computing probabilities by conducting a number of deterministic analyses with specified input distributional information.

Burnside, O. H.↗