Search NASA⌕ Search

SEARCH · Search NASA

Results for “drying methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

A scheme for computing surface fluxes from mean flow observations

A computational method for estimating turbulent surface stress, sensible heat flux, and humidity flux from mean velocity, temperature, and humidity at a single height in the atmospheric surface layer is presented. The method is based on coupling a Monin-Obukhov similarity profile to a 'force-restore' formulation for the evolution of surface soil temperature to yield the local values of shear stress, heat flux, and surface temperature. In addition to reference-level mean flow properties, the parameters required to implement this method are the thermal heat capacity of the soil, the surface aerodynamic roughness, latitude, solar declination, surface albedo, surface emissivity, and atmospheric transmissivity. Sample calculations are presented for (1) constant atmospheric forcing at the reference level, and (2) variable atmospheric forcing corresponding to Kahle's (1977) measurements of windspeed, air temperature, and radiometer soil surface temperature under dry vegetatively sparse conditions in the Mohave Desert, Calif.

Hoffert, M. I.↗

Slurry-pressing consolidation of silicon nitride

A baseline slurry-pressing method for a silicon nitride material is developed. The Si3N4 composition contained 5.8 wt percent SiO2 and 6.4 wt percent Y2O3. Slurry-pressing variables included volume percent solids, application of ultrasonic energy, and pH. Twenty vol percent slurry-pressed material was approximately 11 percent stronger than both 30 vol percent slurry-pressed and dry-pressed materials. The Student's t-test showed the difference to be significant at the 99 percent confidence level. Twenty volume percent (300 h) slurry-pressed test bars exhibited strengths as high as 980 MPa. Large, columnar beta-Si3N4 grains caused failure in the highest strength specimens. The improved strength correlated with better structural uniformity as determined by radiography, optical microscopy, and image analysis.

Sanders, William A.↗

Slurry-pressing consolidation of silicon nitride

A baseline slurry-pressing method for a silicon nitride material is developed. The Si3N4 composition contained 5.8 wt percent SiO2 and 6.4 wt percent Y2O3. Slurry-pressing variables included volume percent solids, application of ultrasonic energy, and pH. Twenty vol percent slurry-pressed material was approximately 11 percent stronger than both 30 vol percent slurry-pressed and dry-pressed materials. The Student's t-test showed the difference to be significant at the 99 percent confidence level. Twenty volume percent (300 h) slurry-pressed test bars exhibited strengths as high as 980 MPa. Large, columnar beta-Si3N4 grains caused failure in the highest strength specimens. The improved strength correlated with better structural uniformity as determined by radiography, optical microscopy, and image analysis.

Sanders, William A.↗

An annual model of SSM/I radiobrightness for dry soil

An annual model is presented of the temperature structure within a homogeneous, dry soil halfspace that is subject to both diurnal and annual insolation, radiant heating from the atmosphere, sensible heat exchange with the atmosphere, and radiant cooling. The thermal constitutive properties of the soil are assumed to be constant so that the heat flow equation can be solved analytically. For computational economy, a variable time interval Laplace transform method is developed to predict the temperature.

Liou, Yuei-An↗

Preliminary Insights Into the Feasibility of Determining the Purification Date of Enriched Uranium by Direct Measurement of the 230 Th/ 234 U Ratio Using an All-Faraday Detector Configuration on the Neoma MC-ICP-MS

Rationale: Mass spectrometric measurement of the 230 Th/ 234 U ratio to calculate the purification age of enriched uranium is typically conducted via a combination of ion counters and faraday detectors, thus requiring an inter-detector calibration scheme. Here, our aim is to understand whether the pursuit of a simplified measurement scheme involving only faraday detectors is feasible. Methods: We investigate the possibility of determining U-Th model ages for two enriched uranium standards (NBL U630 and U850) by direct measurement of the 230 Th/ 234 U ratio (without chromatographic separation or isotope dilution) on a ThermoFisher Scientific Neoma MC-ICP-MS utilizing both solution and laser ablation (LA)-based sampling techniques and an all-faraday detector configuration. Results: For the solution mode analyses conducted on aliquots containing sub μg/mL total U, we produce composite average 230 Th/ 234 U model dates of May 19, 1988 (± 351 days), and March 26, 1961 (± 2.5 years) using the directly measured 230 Th/ 234 U ratios for the NBL U630 and U850 uranium standards, which have certified purification dates of June 6, 1988 (± 190 days), and December 31, 1957 (± 36.5 days), respectively. The ages produced by LA-based sampling of dried residues of the same standards deposited onto cotton TexWipes are less accurate and of poorer precision (June 23, 2004 ± 8.7 years for U630 and December 21, 1965 ± 7.9 years for U850) but still yield meaningful information in regards to the purification date. Conclusions: We believe that further refinement of the all faraday detector measurement approach to include development of a more robust Th/U relative sensitivity factor determination, signal cutoff selection, and data processing protocols will allow for this approach to be confidently applied to enriched uranium materials with unknown purification histories. Potential advantages of the method include the reduced sample handling and infrastructure requirements as well as the ability to simultaneously generate a broad picture of the uranium isotopic composition in tandem with the U-Th age determination.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization and verification of a two-body wave energy converter with a novel power take-off

The lack of high efficient, predictable and reliable power take-off (PTO) systems limits developments of ocean wave energy technology. In this paper, a two-body self-reacting wave energy converter (WEC) with a novel PTO is designed, modelled and implemented for efficiency enhancement. A novel mechanical motion rectifier (MMR) using a ball screw mechanism and an enclosed gear set is integrated to improve the energy harvesting efficiency and reliability by rectifying the oscillatory wave motion into unidirectional rotation of the generator. Detailed design and dynamic modelling for the proposed WEC are presented. A prototype of the PTO is tested in a dry lab to characterize and refine the dynamic modelling. The characterized PTO model is combined with the WEC model to create an overall system model. A water tank test is conducted to verify the overall system dynamics, which proves the accuracy of the model and shows the advantages of the proposed WEC on efficiency and predictability. Following the method of how the WEC system is characterized, performance prediction of the proposed WEC with MMR PTO can be achieved with high accuracy.

16 TIDAL AND WAVE POWER↗

Superluminescent light emitting diodes on naturally survived InGaN/GaN lateral nanowires

We demonstrate a method for nanowire formation by natural selection during wet anisotropic chemical etching in boiling phosphoric acid. Nanowires of sub-10 nm lateral dimensions and lengths of 700 nm or more are naturally formed during the wet etching due to the convergence of the nearby crystallographic hexagonal etch pits. These nanowires are site controlled when formed in augmentation with dry etching. Temperature and power dependent photoluminescence characterizations confirm excitonic transitions up to room temperature. The exciton confinement is enhanced by using two-dimensional confinement whereby enforcing greater overlap of the electron-hole wave-functions. The surviving nanowires have less defects and a small temperature variation of the output electroluminescent light. We have observed superluminescent behaviour of the light emitting diodes formed on these nanowires. There is no observable efficiency roll off for current densities up to 400 A/cm{sup 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Methodology and analytical approach to investigate the impact of building temperature setpoint schedules

This work presents a method for generating a large set of stochastically varying temperature setpoint schedules for building performance simulations. It analyses tradeoffs resulting from specific changes to those schedules in terms of three quantities: total electricity consumption per day; maximum hourly electricity consumption per day and predicted percentage dissatisfied (occupant thermal comfort). The method for generating schedules requires a single base schedule as the starting point and, using a few clearly defined parameters, transforms it into a set of schedules that can be used for modelling an existing building stock or for performing parametric studies. Temperature setpoint schedules are generated and simulated for a small office building in a cool-dry climate in three different case studies pertaining to changing temperature setpoint schedules. Tradeoffs between the three output metrics are significant and vary based on the temperature setpoint schedules and the time of the year.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Newborn Screening Quality Assurance Program for CFTR Mutation Detection and Gene Sequencing to Identify Cystic Fibrosis

All newborn screening laboratories in the United States and many worldwide screen for cystic fibrosis. Most laboratories use a second-tier genotyping assay to identify a panel of mutations in the CF transmembrane regulator (CFTR) gene. Centers for Disease Control and Prevention’s Newborn Screening Quality Assurance Program houses a dried blood spot repository of samples containing CFTR mutations to assist newborn screening laboratories and ensure high-quality mutation detection in a high-throughput environment. Recently, CFTR mutation detection has increased in complexity with expanded genotyping panels and gene sequencing. To accommodate the growing quality assurance needs, the repository samples were characterized with several multiplex genotyping methods, Sanger sequencing, and 3 next-generation sequencing assays using a high-throughput, low-concentration DNA extraction method. The samples performed well in all of the assays, providing newborn screening laboratories with a resource for complex CFTR mutation detection and next-generation sequencing as they transition to new methods.

59 BASIC BIOLOGICAL SCIENCES↗

Laser-Induced Thermal Acoustics Theory and Expected Experimental Errors when Applied to a Scramjet Isolator Model

A scramjet isolator model test apparatus is being assembled in the Isolator Dynamics Research Lab (IDRL) at the NASA Langley Research Center in Hampton, Virginia. The test apparatus is designed to support multiple measurement techniques for investigating the flow field in a scramjet isolator model. The test section is 1-inch high by 2-inch wide by 24-inch long and simulates a scramjet isolator with an aspect ratio of two. Unheated, dry air at a constant stagnation pressure and temperature is delivered to the isolator test section through a Mach 2.5 planar nozzle. The isolator test section is mechanically back-pressured to contain the resulting shock train within the 24-inch isolator length and supports temperature, static pressure, and high frequency pressure measurements at the wall. Additionally, nonintrusive methods including laser-induced thermal acoustics (LITA), spontaneous Raman scattering, particle image velocimetry, and schlieren imaging are being incorporated to measure off-wall fluid dynamic, thermodynamic, and transport properties of the flow field. Interchangeable glass and metallic sidewalls and optical access appendages permit making multiple measurements simultaneously. The measurements will be used to calibrate computational fluid dynamics turbulence models and characterize the back-pressured flow of a scramjet isolator. This paper describes the test apparatus, including the optical access appendages; the physics of the LITA method; and estimates of LITA measurement uncertainty for measurements of the speed of sound and temperature.

Middleton, Troy F.↗

Wetting and Drying Trends Under Climate Change

The geography and timing of changes in water availability under climate change are of considerable societal interest. Characterizing these changes in a robust and meaningful manner, however, has not been easy. In the past decade, studies have engaged two provocative hypotheses to explain and predict large-scale trends in water availability. One hypothesis holds that there will be increased contrasts in available water, as wet places become wetter and dry places become drier. Another hypothesis states that there will be global aridification, as widespread increases in evapotranspiration overwhelm changes in precipitation in most terrestrial regions. There is an extensive and sometimes contentious literature on the evidence for each. In some cases, these debates reflect direct disagreement, but the appearance of disagreement is exaggerated by the diversity of methods and terminologies employed in different studies. Herein we examine the applicability and limits of both hypotheses across different frameworks, scales and contexts, yielding insights on hydrologic change and the future of water availability.

Benjamin F. Zaitchik↗

Method to produce colorless, high porosity, transparent polymer aerogels

A method to produce a polymer gel includes dissolving precursors in a solvent to form a precursor solution, the precursors including polymer precursors, a stable free radical, one or more initiating radicals, and one or more stable free radical control agents, and heating the precursor solution to a temperature of polymerization to produce a cross-linked gel. A dried polymer aerogel has a Brunauer-Emmett Teller (BET) surface area over 100 m2/g, porosity of greater than 10%, visible transparency greater than 20%, color rendering index of over 20%, and average pore size of less than 100 nm.

Chintapalli, Mahati↗

Oxidation kinetics of aluminum diboride

The oxidation characteristics of aluminum diboride (AlB{sub 2}) and a physical mixture of its constituent elements (Al+2B) were studied in dry air and pure oxygen using thermal gravimetric analysis to obtain non-mechanistic kinetic parameters. Heating in air at a constant linear heating rate of 10 °C/min showed a marked difference between Al+2B and AlB{sub 2} in the onset of oxidation and final conversion fraction, with AlB{sub 2} beginning to oxidize at higher temperatures but reaching nearly complete conversion by 1500 °C. Kinetic parameters were obtained in both air and oxygen using a model-free isothermal method at temperatures between 500 and 1000 °C. Activation energies were found to decrease, in general, with increasing conversion for AlB{sub 2} and Al+2B in both air and oxygen. AlB{sub 2} exhibited O{sub 2}-pressure-independent oxidation behavior at low conversions, while the activation energies of Al+2B were higher in O{sub 2} than in air. Differences in the composition and morphology between oxidized Al+2B and AlB{sub 2} suggested that Al{sub 2}O{sub 3}–B{sub 2}O{sub 3} interactions slowed Al+2B oxidation by converting Al{sub 2}O{sub 3} on aluminum particles into a Al{sub 4}B{sub 2}O{sub 9} shell, while the same Al{sub 4}B{sub 2}O{sub 9} developed a needle-like morphology in AlB{sub 2} that reduced oxygen diffusion distances and increased conversion. The model-free kinetic analysis was critical for interpreting the complex, multistep oxidation behavior for which a single mechanism could not be assigned. At low temperatures, moisture increased the oxidation rate of Al+2B and AlB{sub 2}, but both appear to be resistant to oxidation in cool, dry environments. - Graphical abstract: Isothermal kinetic data for AlB{sub 2} in air, showing a constantly decreasing activation energy with increasing conversion. Model-free analysis allowed for the calculation of global kinetic parameters despite many simultaneous mechanisms occurring concurrently. (a) Time–temperature plots, (b) conversion as a function of time, (c) Arrhenius plots used to calculate activation energies, and (d) activation energy as a function of conversion. Display Omitted - Highlights: • First reported kinetic parameters for AlB{sub 2} and Al+2B oxidation in air and O{sub 2}. • Possible mechanism of enhanced boron combustion presented. • Moisture sensitivity shown to be problematic for AlB{sub 2}, less for Al+2B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trace Chemical Detection Using Intercalated MXenes as a Signal Enhancing Substrate in Optical Probes

MXenes are 2D materials composed of layered transition metal nitrides or carbides. These materials are synthesized by HF exfoliation from MAX phases (Ti{sub 3}AlC{sub 2}). The 2D nanomaterial was synthesized by the removal of the 'A' element, resulting in a Mxene product (Ti{sub 3}C{sub 2}). MXenes have the general formula M{sub n+1}X{sub n}T{sub x}, where M is an early transition metal, X is Carbon and/or Nitrogen, and T accounts for surface terminated functional groups such as Fluoride, hydroxyl, and oxygen. These materials have very unique properties, similar to graphene, that allows them to be applied in a variety of trace detection techniques including surface-enhanced Raman spectroscopy (SERS). MXenes have also been demonstrated to selectively uptake uranyl ion, UO{sub 2}{sup 2+}. If this property can be combined with SERS or fluorescence detection, it may be possible to use MXenes as the basis for an alternative method to kinetic phosphorescence analysis (KPA) for trace uranyl measurements. Objectives: To confirm that MXene Nano materials are suitable substrates for SERS and sensor development by enhancing Raman signaling. To determine if certain MXene preparation methods yield materials that are more suitable for trace sensing methods. To determine uranyl uptake properties of these MXene materials and test them for analytical signals. Sample Preparation: Preparation of Ti{sub 3}C{sub 2}MXene (at FSU). MXenes were prepared by etching Al from Ti{sub 3}AlC{sub 2} (MAX phase)material. Two etching techniques yield different MXene products: LiF/HCl: Milder reaction, larger MXene flakes. HF: Harsher reaction, smaller flakes, larger layer separation. Products washed to remove etchant, vacuum filtered, and dried. Dried MXene flakes are air-stable. Film preparation for sensor testing (at SRNL): Suspend powder in diH{sub 2}O, purge with Ar, sonicate for 30 min. Centrifuge and collect supernate with suspended particles. Observed LiF-etched Mxene yielded a higher density of particles and darker collected solution. Drop-cast (4 ml) supernate onto slides and dried with Ar. For Rhodamine B (RhB) testing, drop-cast 4 ml drops onto Mxene spots and dried with Ar. Scanning Electron Microscopy conditions: 10 kV Beam energy, high vacuum; Working distance of 8 mm; beam penetration depth appx. 4 microns, beam spot size appx. 2 nanometers. Results: Detection of aluminum correlates with bright spots on image. Presence of aluminum shows that LiF/HCl etching was less thorough than HF etching. Trace Cl detection in LiF images suggests incomplete rinsing. HF has smaller feature size, more layer structure, and increased homogeneity, consistent with expectations. Macroscopic Raman spectroscopy measurements: 532 nm excitation, ∼50 mW with a ∼100 micron spot size (InPhotonics RPB probe). Kaiser Optical Holospec f/1.8 spectrometer with cooled (-60 deg.C) Andor iDus OE420 CCD. LiF 1x supernate showed good signal for trace measurements of Rhodamine B. HF and 1/4x LiF supernates showed little Mxene or Rhodamine B signal. Low deposition densities led to excess background signal from glass slides. For LiF film, response is linear with Rhodamine B concentration over range tested. Will retest with Raman microscope (∼1 micron spot size) to characterize SERS of more dilute LiF and HF etched Mxenes. Conclusions: The LiF etched material was more suitable for macroscopic SERS measurements because it was more concentrated, resulting in a thicker film than the HF etched Mxene and diluted LiF sample. However, the other materials may give greater SERS enhancements, which we hope to determine from measurements with the Raman microscope. From characterization with SEM we concluded that the HF etched Mxene is more uniform/homogenous and has smaller particle size than the LiF etched Mxene. There is still aluminum present in both samples indicating that etching wasn't complete, but the removal of the aluminum was more efficient in the HF method. Path Forward: Observe SERS with Raman microscopy, to obtain better signals for the more diluted samples and be able to compare enhancement effects for the different MXenes. Characterize uranyl sorption into MXene films and test Raman and fluorescence signals. Revisit the etching conditions to improve removal of aluminum. FSU and SRNL will continue to collaborate to create and characterize different Mxene materials and test their usefulness for sensor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cluster truncated Wigner approximation in strongly interacting systems

We present a general method by which linear quantum Hamiltonian dynamics with exponentially many degrees of freedom is replaced by approximate classical nonlinear dynamics with the number of degrees of freedom (phase space dimensionality) scaling polynomially in the system size. This method is based on generalization of the truncated Wigner approximation (TWA) to a higher dimensional phase space, where phase space variables are associated with a complete set of quantum operators spanning finite size clusters. The method becomes asymptotically exact with increasing cluster size. The crucial feature of TWA is fluctuating initial conditions, which we approximate by a Gaussian distribution. We show that such fluctuations dramatically increase accuracy of TWA over traditional cluster mean-field approximations. In this way we can treat on equal footing quantum and thermal fluctuations as well as compute entanglement and various equal and non-equal time correlation functions. The main limitation of the method is exponential scaling of the phase space dimensionality with the cluster size, which can be significantly reduced by using the language of Schwinger bosons and can likely be further reduced by truncating the local Hilbert space variables. We demonstrate the power of this method analyzing dynamics in various spin chains with and without disorder and show that we can capture such phenomena as long time hydrodynamic relaxation, many-body localization and the ballistic spread of entanglement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Production of monodisperse cerium oxide microspheres with diameters near 100 µm by internal-gelation sol–gel methods

Cerium dioxide microspheres with uniform diameters between 65 – 211 µm were fabricated using internal gelation sol-gel methods. Although uniform microspheres are produced for nuclear fuel applications with diameters above 300 µm, sol-gel microspheres with diameters of 50 - 200 µm have historically been made by emulsion techniques and had poor size uniformity [1, 2]. An internal gelation, sol-gel apparatus was designed and constructed to accommodate the production of small, uniform microspheres whereby cerium-containing solutions were dispersed into flowing silicone oil and heated in a gelation column to initiate solidification [3, 4]. Problems with premature feed gelation and microsphere coalescence were overcome by equipment modifications unique among known internal gelation setups. Microspheres were fabricated and sized in batches as a function of dispersing needle diameter and silicone oil flow rate in the two-fluid nozzle in order to determine the range of sizes possible and corresponding degree of monodispersity. Initial experiments with poor size uniformity were linked to microsphere coalescence in the gelation column prior to solidification as well as excessive flow rates for the cerium feed solution. Average diameter standard deviations as low as 2.23% were observed after optimization of flow rates and minimization of coalescence reactions.

cerium oxide↗

Application of a Dual-Column Method to Selectively Extract and Purify Berkelium-249 from Other Actinides and Impurities

The super heavy element (SHE) Tennessine (Ts, Element 117) was discovered in 2016 a collaboration of US and Russian scientists vis bombardment reaction of 249 Bk + 48 Ca $\rightarrow$ 117 Ts, while the target element 249 Bk (half-life 330d) was produced and provided by the Radiochemical Engineering Development Center (REDC), Oak Ridge National Laboratory (ORNL). The production of 249 Bk at REDC, ORNL requires a multi-step chemical process of irradiated curium feedstock target to remove all fission product (FP) elements and to separate 249 Bk from other actinide (An) elements (Am, Cm, Cf, Fm and Es), including: Caustic Dissolution, Acid Dissolution, Cleanex, two LiCl Anion Exchanges, LiOH Precipitation, Cation Exchange with AHIB, and with Bk Finishing as the final Bk purification step. The major product of this campaign is 252 Cf, while 249 Bk is one of important by-products. The current Cf campaign for recovery of c.a. 15 mg of 249 Bk per campaign (not including the time for Finishing of Cf, Fm and Es) takes 6 or 7 months, including ~3 months spent on Bk Finishing. Bk Finishing includes two major processes: (1) BERKEX, operated inside a hot cell with two cycles of batch solvent extraction (SX) using di-2-ethylhexyl phosphoric acid (HDEHP) as the extractant for tetravalent 249 Bk from an 8 $M$ HNO 3 -0.3 $M$ NaBrO 3 solution; and (2) Cation Exchange (CX) with AHIB (α-Hydroxy isobutyric acid), operated inside a glove box laboratory. Entire Bk Finishing takes five SX, more than five column runs and several drying down processes for aqueous solutions including one from 500 mL to 1 mL for volume reduction. To shorten the Bk Finishing period and simplify the Bk purification operation steps, possibilities of using other resin columns were explored.Recent trials using columns of either $LN$ resin or $MP$-1 anion exchange resin adsorbing the tetravalent 249 Bk 4+ in 8 $M$ HNO 3 -0.5 $M$ NaBrO 3 , followed by eluting impurities (e.g. Ce 4+ ,Cf 3+ ) and stripping 249 Bk resulted in a new Dual Column Method of selectively separating 249 Bk from other trans-plutonium elements and fission product (FP) impurities. This new method is proposed to replace the current Bk Finishing and provide increased Bk purification effeciency and a shorter processing period of 4 to 5 months (less decay loss for higher 249 Bk productivity). This TM Report discusses the trial experimental results, describes the dual column method with relevant chemistry issues and possibilities being used in further process steps ahead of the Bk Finishing.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

How can biosphere models simulate enough vegetation biomass in the mountains of the western United States? Implications of meteorological forcing

Most carbon stocks and fluxes in the western United States are found in mountainous terrain, where observations and modeling are difficult. Terrestrial biosphere models generally underestimate above-ground biomass (AGB) over this region. In this report, we identify methods to reduce this underestimation by focusing upon 1) biases in meteorological datasets, 2) model representation of water stress, and 3) spatial resolution. We adopted the widely-used Community Land Model version 4.5 (CLM 4.5) with six different meteorological datasets and found a 6-fold variation in simulated AGB across Utah/Colorado. Simulations underestimated AGB because of warm and dry biases within the meteorological datasets that reduced water availability and restricted plant growth. To eliminate the AGB underestimation we adopted a meteorological dataset designed for complex terrain (gridMET), combined with a representation of plant hydraulic stress (CLM 5.0). Conversely, changes in spatial resolution (meteorological variables and land surface description) had negligible impact on simulated AGB.

54 ENVIRONMENTAL SCIENCES↗