Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Structural, Optical, Magnetic, and Dielectric Properties of Cr{sup 3+} Substituted Cobalt Aluminate Nanoparticles

The present study investigates the influence of Cr{sup 3+} substitution on structural, optical, dielectric, and magnetic properties of cobalt aluminates in the aluminates series CoAl{sub 2-x}Cr{sub x}O{sub 4}, 0.00 ≤ x ≤ 0.20. These series of nanoparticles are effectively synthesized using the co-precipitation method. The cubic spinel aluminate structure is confirmed by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopic measurements. Transmission electron microscopy (TEM) analysis shows the formation of spherical nanoparticles, which are homogeneous in shape and size. The optical properties of the prepared samples have been investigated by means of optical absorbance spectra. The optical band gap E{sub opt}{sup i} and Urbach energy E{sub u} are estimated. At room temperature, the magnetization of undoped CoAl{sub 2}O{sub 4} reveals a weak ferromagnetic behavior. This ferromagnetism is increased for the sample with x = 0.05, and the samples with higher Cr{sup 3+} content have a tendency to be superparamagnetic on account of the formation of single-domain particles as a consequence of small particle size. Real part of dielectric constant (ε{sup ′}), dielectric loss (tanδ), ac conductivity (σ{sub ac}), real part of impedance (Z{sup ′}), and imaginary part of impedance (Z{sup ″}) are analyzed as a function of frequency and Cr{sup 3+} content. The results show that the dielectric loss (tanδ), dielectric permittivity (ε{sup ′}), and ac conductivity (σ{sub ac}) decrease with the increase in Cr{sup 3+} content, x = 0.05, and then increase with a further increase in Cr{sup 3+} content. The increase in these parameters has been explained on the basis of the hopping mechanism. From the Cole–Cole diagram, the value of the relaxation time τ can be calculated and it has been found to increase with increasing the Cr{sup 3+} content. Actually, a high dielectric constant makes these materials good for energy storage at high frequencies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Structural and compositional evolution of Al{sub 3}(Zr,Y) precipitates in Al-Zr-Y alloy

Structural and compositional evolution of Al{sub 3}(Zr,Y) precipitates in aged Al-Zr-Y alloy was investigated through atom probe tomography (APT) and transmission electron microscope (TEM) analysis and first principles calculations. The results show that short-bar-shaped D0{sub 19}-Al{sub 3}Y with some Zr atoms dissolved in precipitated at the very beginning of decomposition and worked as heterogeneous nuclei for L1{sub 2}-Al{sub 3}Zr with spherical morphology after being aged at 400 °C for 2 h. Quasi-static coarsening happened as the aging treatment lasted from 2 h to 200 h. However, distribution of Zr and Y atoms in Al{sub 3}(Zr,Y) is nearly uniform and Al{sub 3}(Zr,Y) do not have the typical “Al{sub 3}RE core-Al{sub 3}Zr shell” structure which observed in other RE containing Al-Zr-RE alloys with L1{sub 2}-Al{sub 3}RE as nuclei. First principles calculations revealed that binding energy between Y and Zr is strong during the growth of Al{sub 3}(Zr,Y), which led to the co-precipitation of Y and Zr atoms and attribute to the evolution of Al{sub 3}(Zr,Y). - Highlights: •Al{sub 3}Y precipitated firstly and then became nuclei for Al{sub 3}Zr during aging of Al-Zr-Y. •Al{sub 3}(Zr,Y) precipitates do not have the typical “Al{sub 3}Y core-Al{sub 3}Zr shell” structure. •Strong binding between Y and Zr led to the co-precipitation of Y and Zr atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Compositional modulated atomic layer stacking and uniaxial magnetocrystalline anisotropy of CoPt alloy sputtered films with close-packed plane orientation

An atomic layer stacking structure in hexagonal close packed (hcp) Co{sub 100−x}Pt{sub x} alloy films with c-plane sheet texture was directly observed by a high-angle annular dark-field imaging scanning transmission electron microscopy. The analysis of sequential and/or compositional atomic layer stacking structure and uniaxial magnetocrystalline anisotropy (K{sub u} = K{sub u1} + K{sub u2}) revealed that (1) integrated intensity of the superlattice diffraction takes the maximum at x = 20 at. % and shows broadening feature against x for the film fabricated under the substrate temperature (T{sub sub}) of 400 °C. (2) Compositional separation structure in atomic layers is formed for the films fabricated under T{sub sub} = 400 °C. A sequential alternative stacking of atomic layers with different compositions is hardly formed in the film with x = 50 at. %, whereas easily formed in the film with x = 20 at. %. This peculiar atomic layer stacking structure consists of in-plane-disordered Pt-rich and Pt-poor layers, which is completely different from the so-called atomic site ordered structure. (3) A face centered cubic atomic layer stacking as faults appeared in the host hcp atomic layer stacking exists in accompanies with irregularities for the periodicity of the compositional modulation atomic layers. (4) K{sub u1} takes the maximum of 1.4 × 10{sup 7 }erg/cm{sup 3} at around x = 20 at. %, whereas K{sub u2} takes the maximum of 0.7 × 10{sup 7 }erg/cm{sup 3} at around x = 40 at. %, which results in the maximum of 1.8 × 10{sup 7 }erg/cm{sup 3} of K{sub u} at x = 30 at. % and a shoulder in compositional dependence of K{sub u} in the range of x = 30–60 at. %. Not only compositional separation of atomic layers but also sequential alternative stacking of different compositional layers is quite important to improve essential uniaxial magnetocrystalline anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1980

A fundamental approach to adhesion: Synthesis, surface analysis, thermodynamics and mechanics

Several techniques were used to study pretreated Ti 6-4 surfaces including scanning electron microscopy (SEM), electron spectroscopy of chemical analysis (ESCA), and, reflectance visible spectroscopy. Each pretreatment type gave a characteristic surface morphology as seen by SEM. Elemental analysis of the Ti 6-4 surfaces was done using ESCA. Trace residual contaminants from particular chemical pretreatments were identified readily. Results indicate that reflectance visible spectroscopy using indicator dyes placed on Ti 6-4 surfaces appears to be a feasible approach to establish surface acidity. Differences in surface acidity were observed using bromthymol blue on Ti 6-4 surfaces pretreated by two different methods.

Beck, B.↗
DOE OSTI2015

Dry (Mg,Fe)SiO 3 perovskite in the Earth's lower mantle

Combined synthesis experiments and first-principles calculations show that MgSiO 3 -perovskite with minor Al or Fe does not incorporate significant OH under lower mantle conditions. Perovskite, stishovite, and residual melt were synthesized from natural Bamble enstatite samples (Mg/(Fe+Mg) = 0.89 and 0.93; Al 2 O 3 < 0.1 wt% with 35 and 2065 ppm wt H 2 O, respectively) in the laser-heated diamond anvil cell at 1600-2000 K and 25-65 GPa. Combined Fourier transform infrared (FTIR) spectroscopy, x-ray diffraction, and ex-situ transmission electron microscopy (TEM) analysis demonstrates little difference in the resulting perovskite as a function of initial water content. Four distinct OH vibrational stretching bands are evident upon cooling below 100 K (3576, 3378, 3274, and 3078 cm -1 ), suggesting 4 potential bonding sites for OH in perovskite with a maximum water content of 220 ppm wt H 2 O, and likely no more than 10 ppm wt H 2 O. Complementary, Fe-free, first-principles calculations predict multiple potential bonding sites for hydrogen in perovskite, each with significant solution enthalpy (0.2 eV/defect). We calculate that perovskite can dissolve less than 37 ppm wt H 2 O (400 ppm H/Si) at the top of the lower mantle, decreasing to 31 ppm wt H 2 O (340 ppm H/Si) at 125 GPa and 3000 K in the absence of a melt or fluid phase. Here, we propose that these results resolve a long-standing debate of the perovskite melting curve and explain the order of magnitude increase in viscosity from upper to lower mantle.

58 GEOSCIENCES↗
DOE OSTI2024

Impact of Dilute DIO Additive on Local Microstructure of Fluorinated, pNDI‐Based Polymer Solar Cells

The performance of all‐polymer solar cells is often enhanced by incorporating solvent additives during solution processing. Here, in particular, blends based on the model all‐polymer system PBDBT:N2200 have been shown to have increased short‐circuit current and fill factor when processed with dilute diiodooctane (DIO). However, the morphological mechanism that drives the increase in performance is often not well understood due to limitations in common characterization techniques. In this study, it is shown that a combination of X‐ray techniques with cryogenic high‐resolution transmission electron microscopy (HRTEM) analysis can provide a quantitative and spatially resolved picture of polymer chain orientation and alignment in all‐polymer blends. It is found that DIO induces vertical phase separation in PBDBT‐2F:F‐N2200 and increases donor crystallite thickness in the pi‐stacking direction leading to an acceptor‐rich film surface. However, it is also shown that DIO does not disrupt the formation of face‐on donor–acceptor interfaces. These findings suggest that dilute DIO primarily affects crystalline domain formation in single component regions as opposed to mixed regions; thus, dilute DIO can impact vertical charge transport pathways without sacrificing donor–acceptor interfacial connectivity.

Cheng, Christina↗
DOE OSTI2019

A Polymer-Oriented Self-Assembly Strategy toward Mesoporous Metal Oxides with Ultrahigh Surface Areas

Mesoporous metal oxides (MMOs) have attracted comprehensive attention in many fields, including energy storage, catalysis, and separation. Current synthesis of MMOs mainly involve use of surfactants as templates to generate mesopores and organic reagents as solvents to hinder hydrolysis and condensation of inorganic precursors, which is adverse to adjusting the interactions between surfactants and inorganic precursors. The resulting products have uncontrollable pore structure, crystallinity, and relatively lower surface areas. Here, a facile and general polymer-oriented self-assembly strategy to synthesize a series of MMOs (e.g., TiO 2 , ZrO 2 , NbO 5 , Al 2 O 3 , Ta 2 O 5 , HfO 2 , and SnO 2 ) by using cationic polymers as porogens and metal alkoxides as metal oxide precursors in a robust aqueous synthesis system are reported. Nitrogen adsorption analysis and transmission electron microscopy confirm that the obtained MMOs have ultrahigh specific surface areas and large pore volumes (i.e., 733 m 2 g –1 and 0.485 cm 3 g –1 for mesoporous TiO 2 ). Moreover, the structural parameters (surface area, pore size, and pore volume) and crystallinity can be readily controlled by tuning the interactions between cationic polymers and precursors. The as-synthesized crystalline mesoporous TiO 2 exhibits promising performance in photocatalytic water splitting of hydrogen production and a high hydrogen production rate of 3.68 mol h –1 g –1 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Local Multimodal Electro-Chemical-Structural Characterization of Solid-Electrolyte Grain Boundaries

Typical models of polycrystalline ionic materials treat the grain boundary properties as single valued, without consideration of the full range of values that define the macroscopically measured average. Here a unique experimental platform suitable for local multimodal characterization of individual grain boundaries in bicrystal fibers is reported. A variation of three orders of magnitude in the grain boundary conductivity of ceria is observed, as measured across six individual bicrystals by both alternating current impedance spectroscopy and direct current (D.C.) linear sweep voltammetry. Nonlinear behavior of the D.C. measurements is consistent with resistance due to a space charge effect. Time-of-flight secondary ion beam spectroscopy reveals a correlation between grain boundary resistance and the concentration of impurities Si, Al, and Ca segregated at the grain boundaries, although the bulk concentrations of these impurities are negligible. Electron backscatter diffraction analysis of the crystal orientations suggests a correlation between the misorientation across the grain boundaries and grain boundary resistance. These correlations point towards a grain boundary resistance that arises from impurity-generated space charge effects and variations in impurity concentration and hence resistivity driven by the energetics of impurity segregation to grain boundaries of differing surface energies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Preparation of pH ‐responsive cellulose nanofibril/sodium alginate based hydrogels for drug release

Abstract In this work, hydrogels composed of cellulose nanofibril (CNF) and sodium alginate (SA) were prepared as a pH‐responsive release system by controlling the amount of CNF and SA. Scanning electron microscopy, thermogravimetric analysis, and swelling rate methods were used to characterize. The results showed that when the mass ratio of CNF to SA was 2:1, CNF/SA hydrogels with better morphology were obtained. Due to the deprotonation or protonation of calcium alginate, as the pH changing from 1.5 to 11.0, the swelling ratio increased from 7 times to 19 times compared with its dry weight. The drug release behaviors of the CNF/SA hydrogels using ibuprofen (IBU) as a model drug were investigated in vitro. The release of IBU was faster in alkaline conditions and slower in acidic conditions. The drug release mechanism under pH stimulation could be interpreted by the Fickian diffusion and erosion effect based on Korsmeyer‐Peppas model.

Li, Yuhang↗
DOE OSTI2026

Influence of Air and Ethanol Dehydration on Structure, Behavior, and Function of Type I Collagen Scaffolds

Ethanol dehydration is a common step in both scaffold manufacturing and tissue processing, yet the influence of ethanol on collagen is not well understood. This study examined the effects of dehydration, via ethanol treatment and air drying, on collagen structure, behavior, mechanics, and rehydration capacity. Multiple material characterization methods were used including Fourier Transform infrared spectroscopy (FTIR), Raman spectroscopy, scanning electron microscopy, thermogravimetric analysis, small/medium angle x‐ray scattering, volumetric swelling analysis, and tensile testing. Ethanol dehydration removed bulk water from scaffolds, making them stronger and stiffer, but also showed loss of molecular water. This molecular water appears to act as a collagen stabilizer, resulting in less thermally stable scaffolds. The loss of molecular water is also evident in the molecular d‐spacing. Secondary structure of scaffolds was also altered by ethanol, resulting in significantly enhanced rehydration capacity. Bulk water, both before and after rehydration, largely determined mechanical properties, which did not correlate with other structural measures such as FTIR. While rehydration largely returned collagen spacing to pre‐ethanol treated state, structural alterations seen in FTIR cannot be recovered. These results have implications for not only collagen scaffolds, but in many tissue engineering and processing applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

Hydrothermal Synthesis of Platinum-Group-Metal-Free Catalysts: Structural Elucidation and Oxygen Reduction Catalysis

In this paper, a hydrothermal approach to generate a platinum-group-metal-free (PGM-free) Fe-N-C catalyst for the oxygen reduction reaction (ORR) is introduced. The process involves partial carbonization by hydrothermal means followed by thermal treatment to obtain the final catalysts. Detailed X-ray scattering analysis of the glucose-imidazole catalysts (termed as GLU-IMID-C catalysts), obtained for the first time with the use of CarbonXS GUI program, reveals the presence of face-centered cubic (FCC) iron nanoparticles embedded in partially graphitic carbon in all catalyst variations. We also report the physical characterization of these catalysts by using X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller surface area analysis, and transmission electron microscopy. The electrocatalytic behavior of the catalysts towards oxygen reduction is studied separately in acidic and alkaline electrolytes by rotating ring disk electrode measurements. The catalysts exhibit high ORR activity in acidic (0.5 M H 2 SO 4 ) and alkaline (0.1 M KOH) electrolytes. Lastly, a precursor structure-performance relationship of these catalysts and their performance trends in both electrolytes has been discussed in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Ensemble versus Local Restructuring of Core‐shell Nickel–Cobalt Nanoparticles upon Oxidation and Reduction Cycles

Abstract Bimetallic nanoparticles are widely studied, for example in catalysis. However, possible restructuring in the environment of use, such as segregation or alloying, may occur. Taken individually, state‐of‐the‐art analytical tools fail to give an overall picture of these transformations. This study combines an ensemble analysis (near‐ambient‐pressure X‐ray photoelectron spectroscopy) with a local analysis (environmental transmission electron microscopy) to provide an in situ description of the restructuring of core–shell nickel‐cobalt nanoparticles exposed to cycles of reduction and oxidation. It reveals a partial surface alloying accompanied by fragmentation of the shell into smaller clusters, which is not reversible. Beyond this case study, the methodology proposed here should be applicable in a broad range of studies dealing with the reactivity of mono‐ or bi‐metallic metal nanoparticles.

Carenco, Sophie↗
DOE OSTI2021

New Noncentrosymmetric Tetrel Pnictides Composed of Square‐Planar Gold(I) with Peculiar Bonding

Abstract Three novel isostructural equiatomic gold tetrel pnictides, AuSiAs, AuGeP, and AuGeAs, were synthesized and characterized. These phases crystallize in the noncentrosymmetric (NCS) monoclinic space group Cc (no. 9), featuring square‐planar Au within cis ‐[AuTt 2 Pn 2 ] units (Tt=tetrel, Si, Ge; Pn=pnictogen, P, As). This is in drastic contrast to the structure of previously reported AuSiP, which exhibits typical linear coordination of Au with Si and P. Chemical bonding analysis through the electron localization function suggests covalent two‐center two‐electron Tt−Pn bonds, and three‐center Au−Tt−Au and Au−Pn−Au bonds with 1.6 e − per bond. X‐ray photoelectron spectroscopy studies support the covalent and nonionic nature of Au−Pn and Au−Tt bonds. The title materials were found to be n ‐type narrow‐gap semiconductors or semimetals, with nearly temperature‐independent electrical resistivities and low thermal conductivities. A combination of the semimetallic properties with tunable NCS structure provides opportunities for the development of materials based on gold tetrel pnictides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Polymer Entrapment Flash Pyrolysis for the Preparation of Nanoscale Iridium-Free Oxygen Evolution Electrocatalysts

This paper describes the use of a new polymer entrapment flash pyrolysis (PEFP) method for making nanoscale yttrium ruthenate (Y 2 Ru 2 O 7-δ ) electrocatalysts. Here, this approach effectively reduced the synthesis temperature of phase-pure pyrochlore catalysts from 1000 °C to 550 °C, and greatly suppressed the sintering of catalyst particles. The supported nanocrystalline Y 2 Ru 2 O 7-δ catalysts showed enhanced activity towards oxygen evolution reaction (OER) in acidic electrolyte and were stable at 1.50 V for the comparative study (>20 h) under the current density of 10 mA/cm 2 geo in chronopotentiometry testing. This is equivalent to an overpotential value of 270 mV, about half of that of the reference IrO 2 catalyst. X-ray absorption spectroscopy (XAS) and transmission electron microscopy (TEM) analysis showed that the high-surface-area Y 2 Ru 2 O 7-δ catalyst had an oxygen-deficient structure. This study provides a route to the synthesis of fine ceramic (or oxide)-based electrocatalysts for making high-performing electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Green synthesis of sulfur‐doped g‐C 3 N 4 nanosheets for enhanced removal of oxytetracycline under visible‐light irradiation and reduction of its N ‐nitrosodimethylamine formation potential

Abstract BACKGROUND In this study, sulfur‐doped g‐C 3 N 4 (SCN) nanosheets were synthesized using thiourea as a precursor, and then used to catalyze the degradation of oxytetracycline (OTC) under visible‐light irradiation. OTC was chosen as target contaminant because of it being an important precursor of N ‐nitrosodimethylamine (NDMA). RESULTS The removal of OTC was influenced by its initial concentration, initial pH, SCN dosage and water matrices. OTC (≤10 mg L −1 ) was almost completely removed in 40 min under the conditions of an initial pH of 7.0 and a SCN dose of 1.0 g L −1 , and its degradation was well described by the pseudo‐first‐order kinetics model. Water matrices would also influence the degradation of OTC in the system. Electron paramagnetic resonance analysis and trapping experiments confirmed that the function of the radicals for OTC removal followed the order of • O 2 − > • OH > h + . Eight transformation products were determined during the degradation of OTC, it being removed through four pathways: methyl oxidization, demethylation, decarbonylation and secondary alcohol oxidation. SCN was stable in the system, as the removal efficiency of OTC was not significantly reduced even after three recycles. In addition, 55.5% of NDMA formation potential of OTC was reduced after SCN catalytic oxidation. CONCLUSIONS The results imply that the visible‐light‐driven SCN catalytic oxidation is an effective technology not only for the removal of OTC but also for the reduction of NDMA formation potential. © 2021 Society of Chemical Industry

Dou, Yicheng↗
DOE OSTI2018

The Characterization and Optimization of GaN Cap Layers and SiN Cap Layers on AlGaN/GaN HEMT Structures Grown on 200 mm GaN on Silicon

We have studied capping layers for AlGaN‐based high electron mobility transistor (HEMT) structures, looking at different thicknesses of GaN, SiN, and GaN + SiN caps. SiN capping has no effect on the sheet resistance of the layers, as expected from a high quality amorphous passivation layer. GaN cap layers increase the sheet resistance whether combined with a SiN cap or not, a consequence of the polarisation charge present at the GaN/AlGaN interface. For both GaN and SiN caps on their own, we get excellent morphology from only 2 nm thickness, with no degradation for layers up to 10 nm thick. For GaN + SiN caps, we have a speckled morphology with lots of small holes, which transmission electron microscopy (TEM) analysis showed to be linked to holes created in the GaN layers before the deposition of SiN layers. We attribute this to the roughening effect of silane on GaN layers, known in the literature. Upon processing SiN capped and GaN + SiN capped layers into HEMT based heterojunction diode devices, the two have equivalent forward current, but GaN + SiN capping has greatly increased reverse current. We conclude that GaN + SiN is not an appropriate capping layer for AlGaN HEMT based diodes, compared with high quality in situ SiN passivation directly grown on the AlGaN.

Charles, Matthew↗