Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Effect of implanted species on thermal evolution of ion-induced defects in ZnO

Implanted atoms can affect the evolution of ion-induced defects in radiation hard materials exhibiting a high dynamic annealing and these processes are poorly understood. Here, we study the thermal evolution of structural defects in wurtzite ZnO samples implanted at room temperature with a wide range of ion species (from {sup 11}B to {sup 209}Bi) to ion doses up to 2 × 10{sup 16} cm{sup −2}. The structural disorder was characterized by a combination of Rutherford backscattering spectrometry, nuclear reaction analysis, and transmission electron microscopy, while secondary ion mass spectrometry was used to monitor the behavior of both the implanted elements and residual impurities, such as Li. The results show that the damage formation and its thermal evolution strongly depend on the ion species. In particular, for F implanted samples, a strong out-diffusion of the implanted ions results in an efficient crystal recovery already at 600 °C, while co-implantation with B (via BF{sub 2}) ions suppresses both the F out-diffusion and the lattice recovery at such low temperatures. The damage produced by heavy ions (such as Cd, Au, and Bi) exhibits a two-stage annealing behavior where efficient removal of point defects and small defect clusters occurs at temperatures ∼500 °C, while the second stage is characterized by a gradual and partial annealing of extended defects. These defects can persist even after treatment at 900 °C. In contrast, the defects produced by light and medium mass ions (O, B, and Zn) exhibit a more gradual annealing with increasing temperature without distinct stages. In addition, effects of the implanted species may lead to a nontrivial defect evolution during the annealing, with N, Ag, and Er as prime examples. In general, the obtained results are interpreted in terms of formation of different dopant-defect complexes and their thermal stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Degradation mechanisms of Ti/Al/Ni/Au-based Ohmic contacts on AlGaN/GaN HEMTs

We investigated the degradation mechanism of Ti/Al/Ni/Au-based Ohmic metallization on AlGaN/GaN high electron mobility transistors upon exposure to buffer oxide etchant (BOE). The major effect of BOE on the Ohmic metal was an increase of sheet resistance from 2.89 to 3.69 Ω/ₜafter 3 min BOE treatment. The alloyed Ohmic metallization consisted 3–5 μm Ni-Al alloy islands surrounded by Au-Al alloy-rings. The morphology of both the islands and ring areas became flatter after BOE etching. Lastly, we used energy dispersive x-ray analysis and Auger electron microscopy to analyze the compositions and metal distributions in the metal alloys prior to and after BOE exposure.

36 MATERIALS SCIENCE↗

Dielectric, electrical and magnetoelectric characterization of (x)Ni{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} + (1 - x)Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3} composites

The structural, electrical, dielectric, magnetic and magnetoelectric properties of (x)Ni{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} + (1 - x)Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3} (x = 0, 0.15, 0.30, 0.45 and 1) have been studied by means of various experimental techniques. Polycrystalline samples of this series have been prepared by the double sintering ceramic method. X-ray diffraction data analysis revealed purity of the composites. Microstructural analysis using scanning electron microscopy mode depicts the presence of two phases in contact with each other. Dielectric properties were studied at and well above room temperature. Temperature dependent variation of the dielectric constant show diffused phase transition which can be well described by fitting the Lorentz-type relation, {epsilon}{sub A}/{epsilon}=1+(T-T{sub A}){sup 2}/2{delta}{sub A}{sup 2}. Observation of well-saturated ferroelectric hysteresis loop and magnetic hysteresis loop for composites indicates that ferroelectric and magnetic ordering exist simultaneously at room temperature. The static value of magneto electric voltage coefficient ({alpha}{sub E}) has been studied as a function of magnetic field at room temperature for all the composites. The maximum value of {alpha}{sub E} is 7.53 mV/(cm Oe) for 85% PLZT-15% NZFO composites.

36 MATERIALS SCIENCE↗

Microstructural characterization of SiO2/Ni nanocomposites electrodeposited from a sulphate bath modified by PEI

Highlights: • SiO{sub 2}/Ni + PEI nanocomposites are deposited from the sulphate bath containing PEI. • PEI allows incorporation of higher SiO{sub 2} vol% in SiO{sub 2}/Ni + PEI nanocomposites. • PEI in the form of a thin layer surrounds spherical Ni nanograins and SiO{sub 2} clusters. • PEI action ensures high hardness, tribological properties and corrosion resistance. - Abstract: SiO{sub 2}/Ni nanocomposite coatings containing well-dispersed SiO{sub 2} nanoparticles were electrodeposited from a sulphate bath with and without the addition of polyethylenimine (PEI) as a cationic surfactant. The surface morphology and microstructure in the cross-sections of the deposited nanocomposites were examined by scanning electron microscopy. More detailed microstructure characterization was performed using transmission, scanning-transmission and high resolution transmission electron microscopy. It was determined that the addition of 0.05 g/L and 0.1 g/L of PEI allows the incorporation of SiO{sub 2} nanoparticles in the nickel matrix to be increased in comparison with the nanocomposite deposited without a surfactant. Based on high spatial resolution microanalysis, performed using high count rate energy dispersive spectroscopy of characteristic X-rays in the scanning-transmission mode, the distribution of SiO{sub 2} nanoparticles in the nanocomposite was visualized on elemental maps. Image analysis of the electron microscopy images enabled the mean equivalent circle diameters of grains in the nickel matrix to be determined, together with the volume fraction of SiO{sub 2} nanoparticles in the nanocomposites. The volume fraction of SiO{sub 2} clusters in the SiO{sub 2}/Ni + PEI nanocomposites with the addition of 0.05 g/L and 0.1 g/L of PEI is equal to 18.4% and 13.3%, respectively. Furthermore, the PEI addition allows the nickel grain size in the matrix to be reduced. The combination of different imaging techniques confirmed that PEI is not only present as a surfactant in the electrolytic bath, but also incorporates into the microstructure of the nanocomposite. Nanocomposites electrodeposited in the presence of 0.05 g/L of PEI exhibit higher hardness, good tribological properties and improved corrosion resistance. Although increasing the PEI concentration in the bath up to 0.1 g/L strongly promotes grain size reduction and increase of the SiO{sub 2} volume fraction, it also causes an increase in the PEI fraction embedded in the microstructure, which results in deterioration of the properties of the SiO{sub 2}/Ni + PEI nanocomposites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comparative study of nuclear effects in polarized electron scattering from 3 He

We present a detailed analysis of nuclear effects in inclusive electron scattering from polarized 3 He nuclei for polarization asymmetries, structure functions and their moments, both in the nucleon resonance and deep-inelastic regions. We compare the results of calculations within the weak binding approximation at finite Q 2 with the effective polarization ansatz often used in experimental data analyses, and explore the impact of Δ components in the nuclear wave function and nucleon off-shell corrections on extractions of the free neutron structure. Using the same framework we also make predictions for the Q 2 dependence of quasielastic scattering from polarized 3 He, data on which can be used to constrain the spin-dependent nuclear smearing functions in 3 He.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Iodine Capture Studies of Copper- and Bismuth-Based Sorbents

The release of radioiodine, one of several radionuclides of concern when recycling used nuclear fuel (UNF), is an important consideration in the fuel cycle. In this study, two sorbent materials, Cu 0 -polyacrylonitrile (PAN) and Bi 0 -PAN, were tested as solid sorbent candidates for iodine capture. Experiments using a thin bed of sorbent material were exposed to vaporized iodine for over 300 hours (~2 weeks) under varied conditions in a dynamic flow environment. The overall performance was monitored in real-time using thermogravimetric analysis, and the materials were subsequently characterized for surface and bulk analysis using scanning electron microscopy – energy-dispersive spectroscopy (SEM-EDS) and powder x-ray diffraction (pXRD), respectively. Iodine (in the form of I 2 ) is expected to be released primarily in the dissolver off-gas (DOG) stream; therefore, this study demonstrates the effects of elemental iodine (I 2 ), water vapor (H 2 O), and nitrogen dioxide (NO 2 ). When exposed to ‘ideal’ conditions (in which I 2 is carried by dry air), Cu 0 -PAN and Bi 0 -PAN behave differently, with TGA analysis indicating that Cu 0 sorption performance is higher than that of Bi 0 , as evidenced by a larger mass change. Under ‘harsh’ conditions—such as a gaseous feed containing I 2 , H 2 O, and NO 2 vapors carried by air,—iodine capture performance for both Cu 0 - and Bi 0 -PAN are affected. SEM-EDS and pXRD analysis of these materials is discussed herein.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Synthesis of silver nano-materials from Grevillea robusta A Cunn (Silver-oak tree) leaves extract and shape directing role of cetyltrimethylammonium bromide

Grevillea robusta (Silver-oak tree) tree is a medicinal tree. Conventional UV-visible spectrophotometric and transmission electron microscopic technique were used to determine the morphology of silver nanoplates (AgNP) using Grevillea robusta (Silver-oak tree) aqueous leaves extract for the first time. The visible spectra showed the presence of three well defined surface plasmon absorption (SPR) bands at 500, 550 and 675 nm which was attributed to the anisotropic growth of Ag-nanoplates. Transmission electron microscopic (TEM) analysis of AgNP showed formation of truncated triangular, polyhedral with some irregular shapes nanoplates in the size range 8-20 nm. Cetyltrimethylammonium bromide (CTAB) has no significant effect on the shape of the spectra, position of SPR bands, size and size distribution of AgNP.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of Hybrid Materials Based on Iron Nanoparticle-Decorated Multiwalled Carbon Nanotubes

Fe-containing nanoparticles have been grown for the first time on the surface of multiwalled carbon nanotubes by metalorganic chemical vapor deposition using iron acetylacetonate, Fe(acac){sub 3}, as a precursor. The resultant hybrid nanomaterial has been characterized by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and thermogravimetric analysis. The results demonstrate that the synthesized material consists of multiwalled carbon nanotubes whose surface is decorated with iron nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Iron Oxides

Abstract: Fe oxides are common clay-sized oxide, oxyhydroxide and hydroxide soil minerals. They are compounds of Fe, O, and H that have structures based on close-packed arrays of O. The octahedral and tetrahedral cavities within these arrays are filled with either Fe3+ or Fe2+ to form Fe(O/OH)6, FeO6, or FeO4 structural units. All of the naturally occurring Fe oxide minerals usually undergo some degree of isomorphous substitution of other metal ions for Fe in their structures. Relatively simple techniques may be used to identify Fe oxides in the field based on their typical colors and magnetic properties. In the laboratory, a variety of instrumental techniques can be used to confirm phase identity and to quantify amount. Of these, X-ray diffraction, infrared spectroscopy, electron microscopy, thermal analysis, and Mössbauer spectroscopy are the most commonly used techniques. As oxides, the functional groups on their surfaces may have positive, negative, or no charge depending on pH and on the concentration and nature of other ions in the contact solution. A net positive surface charge usually is observed in soils because Fe oxides have a point-of-zero-charge in the neutral or slightly basic pHs. The functional groups on the surface form complexes with cations and anions from the aqueous phase. Their sorption and electron-buffering properties significantly affect the geochemical cycles of almost all elements having agronomic or environmental significance.

electron-transfer chemistry↗

Structure-property relationships and mobility optimization in sputtered La-doped BaSn O 3 films: Toward 100cm 2 V -1 s -1

he wide band gap semiconducting perovskite BaSnO 3 is of high current interest due to outstanding room temperature mobility at high electron density, fueled by potential applications in oxide, transparent, and power electronics. Due in part to a lack of lattice-matched substrates, BaSnO 3 thin films suffer from high defect densities, however, limiting electron mobility. Additionally, the vast majority of BaSnO 3 thin film research has focused on pulsed laser deposition or molecular beam epitaxy. In this work, we present an exhaustive optimization of the mobility of Ba 0.98 La 0.02 SnO 3 films grown by a scalable, high-throughput method: high-pressure-oxygen sputter deposition. Considering target synthesis conditions, substrate selection, buffer layer structure, deposition temperature, deposition rate, thickness, and postdeposition annealing conditions, and by combining high-resolution x-ray diffraction, reciprocal space mapping, rocking curve analysis, scanning transmission electron microscopy, atomic force microscopy, and temperature-dependent electronic transport measurements, detailed understanding of synthesis-structure-property relationships is attained. Optimized room temperature mobility of 96 cm 2 V –1 s –1 is achieved in vacuum-annealed GdScO 3 (110)/BaSnO 3 (120 nm)/Ba 0.98 La 0.02 SnO 3 (200 nm) heterostructures, as well as 92 cm 2 V –1 s –1 on unbuffered substrates and 87 2 V –1 s –1 without postdeposition annealing. These results, including important trends in defect densities and a surprising dependence of mobility on lattice mismatch, substantially expand the understanding of the interplay between deposition conditions, microstructure, and transport in doped BaSnO 3 films, establishing competitive mobilities in films fabricated via a scalable, high-throughput, industry-standard technique.

36 MATERIALS SCIENCE↗

Microstructure analysis of laser beam weldments performed on neutron-irradiated 304L steel containing 3 and 8 appm helium

We report that AISI 304 L austenitic stainless steel is one of the major structural materials used in light water reactors (LWRs). In the future, 304 L components may require repair, and several welding techniques have been proposed as candidates. In this study, laser beam welding using the low-energy contribution approach was performed in ~2016 on neutron-irradiated AISI 304 L steel with nominal values of 3 and 8 appm helium (He). The goal was to investigate the impact of helium on the irradiated material weldability and evaluate helium-associated damage. The weld and heat-affected zone (HAZ) microstructure was studied using scanning electron microscopy, electron backscatter diffraction, and transmission electron microscopy (TEM). Analysis of the weldment cross-sections did not reveal severe cracking. Still, evidence of incipient helium-associated damage was observed in the HAZ, manifesting as degraded grain boundaries (GBs) “decorated” by pore chains and mostly small (i.e., ≤ 25-30 µm) scattered cracks. The largest observed crack was ~50 µm in length. Helium-associated damage was localized within ~200-300 µm of the weld pool boundary, and the fraction of the compromised GBs, as a rule, was below ~9-11% of the total GB network. TEM analysis showed significant annealing of the radiation-induced defects at distances up to ~300 µm from the weld pool boundary. Inside the HAZ, the cavities (likely, helium bubbles) tended to form at GBs and inclusions, such as manganese sulfide precipitates in the grain interior. Crystallography analysis of the HAZ damage showed that random high-angle boundaries were most susceptible to helium-associated damage. In contrast, low-angle random boundaries and twin boundaries appeared to be strongly resistant to degradation from the combined effects of helium and welding.

36 MATERIALS SCIENCE↗

Microstructure and transformation behavior of Ni{sub 24.7}Ti{sub 50.3}Pd{sub 25} high temperature shape-memory alloy with Sc micro-addition

NiTiPd shape-memory alloys (SMAs) are potential functional materials for use as solid-state actuators in the temperature range 100–250 °C. The present study investigates the effect of 1.0 at.% Sc micro-addition to Ni{sub 24.7}Ti{sub 50.3}Pd{sub 25} alloy, Sc replacing either Ti or Ni. Results show that all the three alloys studied have stable transformation behavior on stress-free thermal cycling and hence, are suitable for cyclic actuation applications. However, the addition of Sc to NiTiPd alloy leads to decrease of transformation temperatures, the magnitude of decrease being greater for the alloy with Sc replacing Ni. The martensite finish (M{sub f}) temperature of 181 °C for the NiTiPd alloy decreased to 139 °C for Sc replacing Ti and 83 °C for Sc replacing Ni. Also, the indentation modulus of NiTiPdSc (Sc replacing Ni) alloy is found to be significantly low compared to the other alloys. Analysis indicates that the observed differences in the alloy properties are related to the solubility of Sc in the NiTiPd matrix. While the quaternary NiTiPdSc alloy, Sc replacing Ti, has a single phase microstructure, the alloy with Sc replacing Ni shows the presence of Sc-rich and TiPd-type second phases in the microstructure. TEM examination revealed that the TiPd-type phase has a distinct rod-like morphology (30–50 nm) arranged in a grid-like structure. The transformation and indentation behavior of the alloys is elucidated using thermodynamic calculations of frictional energy and an electronic structure based analysis. - Highlights: • TEM of Ni{sub 23.7}Ti{sub 50.3}Pd{sub 25}Sc{sub 1} showed distinct grid of TiPd-type phase nanorods < 50 nm. • Stress-free thermal cycling of all the three alloys showed stable transformation behavior. • Ni{sub 24.7}Ti{sub 49.3}Pd{sub 25}Sc{sub 1} and Ni{sub 23.7}Ti{sub 50.3}Pd{sub 25}Sc{sub 1} showed single and multiphase structures. • Sc micro-addition (1 at.%) to Ni{sub 24.7}Ti{sub 50.3}Pd{sub 25} alloy decreased TTs significantly. • Ni{sub 23.7}Ti{sub 50.3}Pd{sub 25}Sc{sub 1} exhibited lower modulus of 67 GPa to 85 GPa of Ni{sub 24.7}Ti{sub 50.3}Pd{sub 25}.

36 MATERIALS SCIENCE↗

Electrical, thermal and electrochemical properties of disordered carbon prepared from palygorskite and cane molasses

We have synthesized and electrochemically tested a carbon sample that was suitable as anode for lithium secondary battery. The synthesis was based on the use of the palygorskite clay as template and sugar cane molasses as carbon source. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, Brunauer–Emmett–Teller (BET) measurements and High Resolution Transmission Electron Microscope (HRTEM) analysis showed that the nanometric carbon material has a highly disordered graphene-like wrinkled structure and large specific surface area (467 m{sup 2} g{sup −1}). The compositional characterization revealed a 14% of heteroatoms-containing groups (O, H, N, S) doping the as-prepared carbon. Thermophysical measurements revealed the good thermal stability and an acceptable thermal diffusivity (9·10{sup −7} m{sup 2} s{sup −1}) and conductivity (1.1 W m{sup −1} K{sup −1}) of this carbon. The electrical properties showed an electronic conductivity of hole-like carriers of approximately one S/cm in a 173–293 K range. The testing of this material as anodes in a secondary lithium battery displayed a high specific capacity and excellent performance in terms of number of cycles. A high reversible capacity of 356 mA h g{sup −1} was reached. - Graphical abstract: TEM image and electrochemistry behavior of a new graphene oxide-like carbon. - Highlights: • A high disordered graphene oxide-like conducting carbon is reported. • The synthesis was based on palygorskite and sugar cane molasses as precursors. • The disordered conducting carbon is composed of doped- graphene heterogeneous domains. • This material combines a large specific surface area and high electric conductivity. • The thermophysical and electrochemical properties of this material reveal adequate behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Aquathermolysis of High-Viscosity Oil Using Iron, Cobalt, and Copper Tallates

The results of a study of the composition of active forms of the catalyst formed upon degradation of the precursor, based on the results of physical modeling of a sample of high-viscosity oil having high asphaltene and resin contents, are presented. Oil-soluble iron, cobalt, and copper tallates were used as the objects of the study. The composition of the separated powder of the active form of the catalyst was determined by X-ray diffraction analysis, and the catalyst particle size was determined by scanning electron microscopy. The SARA (saturate, aromatic, resin and asphaltene) analysis data revealed a marked decrease in high-molecular-weight oil components due to thermocatalytic cracking. The basic transformation mechanism is breakdown of the high-molecular-weight compounds along the sulfur-bearing bonds, as indicated by elemental CHNS (carbon, hydrogen, nitrogen and sulfur) analysis data. It is shown that the cobalt- and copper-based oil-soluble complexes turn are converted to sulfide forms and the iron-based complex is converted to the oxide form. According to the results of scanning electron microscopic analysis of the catalyst, the particle size is about 60 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum Hall effect and hopping conductivity in n-InGaAs/InAlAs nanoheterostructures

The longitudinal and Hall magnetoresistances are measured in the quantum Hall effect regime in the n-InGaAs/InAlAs heterostructures at temperatures of T = (1.8–30) K in magnetic fields up to B = 9 T. Temperature-induced transport in the region of the longitudinal resistance minima, corresponding to the plateau regions at Hall resistance, is investigated within the framework of the concept of hopping conductivity in a strongly localized electron system. The analysis of variable-range hopping conductivity in the region of the second, third, and fourth plateau of the quantum Hall effect provides the possibility of determining the localization length exponent.

36 MATERIALS SCIENCE↗

The origin of early age expansions induced in cementitious materials containing shrinkage reducing admixtures

Studies on the early-age shrinkage behavior of cement pastes, mortars, and concretes containing shrinkage reducing admixtures (SRAs) have indicated these mixtures frequently exhibit an expansion shortly after setting. While the magnitude of the expansion has been noted to be a function of the chemistry of the cement and the admixture dosage; the cause of the expansion is not clearly understood. This investigation uses measurements of autogenous deformation, X-ray diffraction, pore solution analysis, thermogravimetry, and scanning electron microscopy to study the early-age properties and describe the mechanism of the expansion in OPC pastes made with and without SRA. The composition of the pore solution indicates that the presence of the SRA increases the portlandite oversaturation level in solution which can result in higher crystallization stresses which could lead to an expansion. This observation is supported by deformation calculations for the systems examined.

36 MATERIALS SCIENCE↗

Interfacial Microstructural Evolution and Metallurgical Bonding Mechanisms for IN718 Superalloy Joint Produced by Hot Compressive Bonding

The novel metallurgical joining process for bonding IN718 superalloy was investigated by hot compressive bonding (HCB) process under the deformation temperature range of 1000 °C to 1150 °C and true strains ranging from 0 to 0.5 at a strain rate of 0.001 s{sup −1}. The effect of HCB process parameters on the tensile strength was analyzed. Both the as-deformed and the interfacial microstructures were characterized using the optical microscope, electron backscattered diffraction and transmission electron microscope (TEM) analysis. The results of tensile property revealed that the degree of metallurgical bonding is promoted by increasing deformation temperature and strain. The evolution of the interfacial microstructure showed that the migration of interfacial grain boundary (IGB), which is characterized by discontinuous dynamic recrystallization, is the dominant metallurgical bonding mechanism in the early stages of bonding. TEM analysis indicated that the dislocation density is distributed heterogeneously over both sides of IGB, which is the significant reason for the migration of IGB, during the initial stage of HCB process.

36 MATERIALS SCIENCE↗