Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Simulation Studies of the Dielectric Grating as an Accelerating and Focusing Structure

A grating-based design is a promising candidate for a laser-driven dielectric accelerator. Through simulations, we show the merits of a readily fabricated grating structure as an accelerating component. Additionally, we show that with a small design perturbation, the accelerating component can be converted into a focusing structure. The understanding of these two components is critical in the successful development of any complete accelerator. The concept of accelerating electrons with the tremendous electric fields found in lasers has been proposed for decades. However, until recently the realization of such an accelerator was not technologically feasible. Recent advances in the semiconductor industry, as well as advances in laser technology, have now made laser-driven dielectric accelerators imminent. The grating-based accelerator is one proposed design for a dielectric laser-driven accelerator. This design, which was introduced by Plettner, consists of a pair of opposing transparent binary gratings, illustrated in Fig. 1. The teeth of the gratings serve as a phase mask, ensuring a phase synchronicity between the electromagnetic field and the moving particles. The current grating accelerator design has the drive laser incident perpendicular to the substrate, which poses a laser-structure alignment complication. The next iteration of grating structure fabrication seeks to monolithically create an array of grating structures by etching the grating's vacuum channel into a fused silica wafer. With this method it is possible to have the drive laser confined to the plane of the wafer, thus ensuring alignment of the laser-and-structure, the two grating halves, and subsequent accelerator components. There has been previous work using 2-dimensional finite difference time domain (2D-FDTD) calculations to evaluate the performance of the grating accelerator structure. However, this work approximates the grating as an infinite structure and does not accurately model a realizable structure. In this paper, we will present a 3-dimensional frequency-domain simulation of both the infinite and the finite grating accelerator structure. Additionally, we will present a new scheme for a focusing structure based on a perturbation of the accelerating structure. We will present simulations of this proposed focusing structure and quantify the quality of the focusing fields.

36 MATERIALS SCIENCE↗

Implicit, vectorizable schemes for the flux-difference split, three-dimensional Navier-Stokes equations

Two hybrid upwind models are defined for solving the Euler equations. The algorithms both employ approximate factorization (AF) in crossplane and symmetric block Gauss-Seidel relaxation in the third direction. One approach adds an additional factorization step to lower the number of required grid point operations for inversion of the block tridiagonal matrices; however, the move permits only one third of the operations to be vectorized. Finite difference solutions are calculated on a C-H-type grid, in this case enveloping a slender, sharp-edged delta wing. Sample data are provided for the calculated vortex flow for Re of 10,000, at a 20.5 deg angle of attack, represented in a crossflow velocity vector plot and in a spanwise pressure coefficient distribution. The AF scheme, without additional factorization, when used with a grid covering 51 x 51 x 72 points provides a convergent solution with no time step lasting longer than 0.00001 sec.

Liu, C. H.↗

Modeling and Simulating Dislocation Dynamics Near Sound Speeds in Cubic Crystals

The motion of crystal dislocations near sound speeds is investigated using atomic-scale molecular dynamics (MD) simulations and continuum equations of motion. A material’s deformation rate is influenced by whether dislocations can propagate in the high-velocity high-stress regime. In the femto-second resolved MD simulations, a shear stress is applied to a pair of partial edge dislocations in copper at T = 25 K, and the pair’s average position is tracked with time. Analysis for the steady-state motion reveals that the dislocations can move faster than at least two transverse sound speeds depending on the applied stress. On the modeling side, the dislocation glide equations govern the evolution of the local displacement field according to material elastic constants. A second-order accurate finite difference scheme is applied to solve the screw dislocation equation in the continuum limit for aluminum. This method proved difficult to implement due to numerical instabilities surrounding the dislocation core, so alternative solving schemes may be needed. Combining an external acceleration with the equation of motion should reveal whether the strain energy density remains finite at transonic and supersonic glide speeds.

36 MATERIALS SCIENCE↗

Second-order closure analysis of turbulent reacting flows

A reacting shear layer program for a complete second-order closure of turbulent reacting flows is developed. The program uses a typical eddy box model and many of the fluid mechanical turbulence models developed in earlier studies. The computer program actually solves a total of 30 equations, where the numerical integration of the equations is performed by a forward-time-centered space quasi-implicit upwind finite-difference scheme. Results for nonreacting and simple isothermal reacting flows are presented along with preliminary results for propane-air flames. It is shown that the program predictions for simple nonreacting flows are in good agreement with available data. The calculations for isothermal reacting flows demonstrate the importance of including a mixedness correlation in finite rate chemistry calculations, where significant errors in the flowfield properties can result from neglect of the interaction between turbulence and the chemistry. Results for propane-air diffusion flames further support this conclusion.

Varma, A. K.↗

A comparative study of calibration techniques for finite strain elastoplasticity: Numerically-exact sensitivities for FEMU and VFM

Accurate identification of material parameters is crucial for predictive modeling in computational mechanics. Here, the two primary approaches in the experimental mechanics community for calibration from full-field digital image correlation data are known as finite element model updating (FEMU) and the virtual fields method (VFM). In VFM, the objective function is a squared mismatch between internal and external virtual work or power. In FEMU, the objective function quantifies the weighted mismatch between model predictions and corresponding experimentally measured quantities of interest. It is minimized by iteratively updating the parameters of an FE model. While FEMU is seen as more flexible, VFM is commonly used instead of FEMU due to its considerably greater computational expense. However, comparisons between the two methods usually involve approximations of gradients or sensitivities with finite difference schemes, thereby making direct assessments difficult. Hence, in this study, we compare VFM and FEMU in the context of numerically-exact sensitivities obtained through local sensitivity analyses and the application of automatic differentiation software. To this end, we conduct a series of test cases to assess both methods under practical challenges using a finite strain elastoplasticity model.

Automatic differentiation↗

Systematic study of spontaneous emission in a two-dimensional arbitrary inhomogeneous environment

The spontaneous emission (SE) of the excited atoms in a two-dimensional (2D) arbitrary inhomogeneous environment has been systematically studied. The local density of states, which determines the radiation dynamics of a point source (for 3D) or a line source (for 2D), in particular, the SE rate, is represented by the electric dyadic Green's function. The numerical solution of the electric Green's tensor has been accurately obtained with the finite-difference frequency-domain method with the proper approximations of the monopole and dipole sources. The SE of atoms in photonic crystal and plasmonic metal plates has been comprehensively and comparatively investigated. For both the photonic crystal and plasmonic plates systems, the SEs depend on their respective dispersion relations and could be modified by the finite-structure or finite-size effects. This work is important for SE engineering and the optimized design of optoelectronic devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical simulations of galactic wakes

We have performed a series of numerical simulations which examine the simple but realistic case of a galaxy with a smooth potential corresponding to a King profile, and with no interstellar medium. This corresponds to the case of an early-type cluster galaxy that has previously been stripped of its gas. The simulations provide a numerical basis for future work involving galaxies with interstellar media. We use a time-explicit finite difference code (Lufkin & Hawley 1992, ApJ submitted) to obtain solutions to the nonlinear equations for adiabatic flow in axisymmetry. The computational grid covers a region extending 500 kpc from a stationary galaxy radially and along the symmetry axis. We use a graded mesh, allowing for full resolution near the galaxy. Because the assumed potential has a finite depth, no artificial inner boundary condition is necessary; reflection symmetry at the axis is assumed. With a total grid size of 64 radial x 128 vertical, each run requires approximately 5 minutes of cpu time on the NCSA Cray-2.

Lufkin, Eric A.↗

Dewar to dewar model for superfluid helium transfer

A model has been developed to predict the flow of He II between a source and a receiving dewar. The model uses a finite difference aproximation to integrate the describing equations. The transfer path may contain porous plugs or mechanical pumps, heater sections, heat leaks, constrictions due to valves, and bends. These line elements may occur in any order and in any quantity. The line elements are easily reconfigured by changing the input data. The input consists of the number of finite element cells, the pressure in each dewar, the heat input to each section and the dimensions of each section. The output is the temperature, pressure, flow rate, velocities and heat flux in each section. An internal reference table provides the properties of He II. The model is programmed for a LOTUS work sheet. It converges rapidly and usually requires 10 to 15 iterations. For most applications an iteration takes 30 s on an AT. The predictions agree well with experimental data.

Snyder, H. A.↗

Polariton Dynamics in Two-Dimensional Ruddlesden–Popper Perovskites Strongly Coupled with Plasmonic Lattices

Strong coupling between light and matter can produce hybrid eigenstates known as exciton-polaritons. Although polariton dynamics are important photophysical properties, the relaxation pathways of polaritons in different coupling regimes have seen limited attention. This paper reports the dynamics of hybridized states from 2D Ruddlesden-Popper perovskites coupled to plasmonic nanoparticle lattices. The open cavity architecture of Al lattices enables the coupling strength to be modulated by varying either the lead halide perovskite film thickness or the superstrate refractive index. Both experiments and finite-difference time-domain simulations of the optical dispersion diagrams showed avoided crossings that are a signature of strong coupling. Furthermore, our analytical model also elucidated the correlation between the exciton/plasmon mixing ratio and polariton coupling strength. Using fs-transient absorption spectroscopy, we found that both the upper and lower polaritons have shorter lifetimes than the excitons and that polaritons can show faster excited state dynamics when they have access to additional energy transfer channels.

2D perovskite↗

Nanopatterning and tuning of optical taper antenna apex for tip-enhanced Raman scattering performance

This paper focuses on finding optimal electrochemical conditions from linear sweep voltammetry analysis for preparing highly reproducible tip-enhanced Raman scattering (TERS) conical gold tips with dc-pulsed voltage etching. Special attention is given to the reproducibility of tip apex shapes with different etchant mixtures. We show that the fractional Brownian motion model enables a mathematical description of the decaying current kinetics during the whole etching process up to the cutoff event. Further progress in preparation of highly reproducible smooth and sharp tip apexes is related to the effect of an additive, such as isopropanol, to aqueous acids. A finite-difference time-domain method based near-field analysis provides evidence that TERS performance depends critically on tip orientation relative to a highly focused laser beam. A TERS based criterion for recognizing gold tips able to couple/decouple optical near- and far-fields is proposed.

36 MATERIALS SCIENCE↗

Discretized Newton-relaxation solution of high resolution flux-difference split schemes

A method is presented for the implicit solution of high resolution flux-difference split schemes for which it is impractical to obtain the Jacobian matrix analytically. The method is used frequently in numerical schemes for solving nonlinear systems of equations, but apparently has not been used to date for approximating the Jacobian of the Roe numerical flux vectors. The method consists of obtaining a discretized Jacobian by using simple finite-differences of the flux vectors, and then using this discretized Jacobian in a Newton-relaxation solution method. The method is applied to both compressible and incompressible flows. Numerical results are presented that demonstrate the method works for both inviscid and viscous flows.

Whitfield, David L.↗

Parallel transmit excitation at 1.5 T based on the minimization of a driving function for device heating

Purpose: To provide a rapid method to reduce the radiofrequency (RF) E-field coupling and consequent heating in long conductors in an interventional MRI (iMRI) setup. Methods: A driving function for device heating (W) was defined as the integration of the E-field along the direction of the wire and calculated through a quasistatic approximation. Based on this function, the phases of four independently controlled transmit channels were dynamically changed in a 1.5 T MRI scanner. During the different excitation configurations, the RF induced heating in a nitinol wire immersed in a saline phantom was measured by fiber-optic temperature sensing. Additionally, a minimization of W as a function of phase and amplitude values of the different channels and constrained by the homogeneity of the RF excitation field (B{sub 1}) over a region of interest was proposed and its results tested on the benchtop. To analyze the validity of the proposed method, using a model of the array and phantom setup tested in the scanner, RF fields and SAR maps were calculated through finite-difference time-domain (FDTD) simulations. In addition to phantom experiments, RF induced heating of an active guidewire inserted in a swine was also evaluated. Results: In the phantom experiment, heating at the tip of the device was reduced by 92% when replacing the body coil by an optimized parallel transmit excitation with same nominal flip angle. In the benchtop, up to 90% heating reduction was measured when implementing the constrained minimization algorithm with the additional degree of freedom given by independent amplitude control. The computation of the optimum phase and amplitude values was executed in just 12 s using a standard CPU. The results of the FDTD simulations showed similar trend of the local SAR at the tip of the wire and measured temperature as well as to a quadratic function of W, confirming the validity of the quasistatic approach for the presented problem at 64 MHz. Imaging and heating reduction of the guidewire were successfully performed in vivo with the proposed hardware and phase control. Conclusions: Phantom and in vivo data demonstrated that additional degrees of freedom in a parallel transmission system can be used to control RF induced heating in long conductors. A novel constrained optimization approach to reduce device heating was also presented that can be run in just few seconds and therefore could be added to an iMRI protocol to improve RF safety.

60 APPLIED LIFE SCIENCES↗

Velocity-pressure integrated versus penalty finite element methods for high Reynolds number flows

Velocity-pressure integrated and consistent penalty finite element computations of high Reynolds number, laminar flows are presented. In both of the methods, the pressure has been interpolated using linear shape functions for a triangular element. The triangular element is contained inside the bi-quadratic isoparametric element. It has been reported previously that the pressure interpolation method, when used in the velocity-pressure integrated method, yielded accurate computational results for high Reynolds number flows. It is shown that use of the same pressure interpolation method in the consistent penalty finite element method yielded accurate velocity and pressure fields which were comparable to those obtained using the velocity-pressure integrated method. Accuracy of the two finite element methods has been demonstrated by comparing the computational results with available experimental data and/or fine-grid finite difference computational results. Advantages and disadvantages of the two methods are discussed on the basis of accuracy and convergence nature. Example problems considered include a lid-driven cavity flow for Reynolds number of 10,000, a laminar backward-facing step flow, a laminar flow through a nest of cylinders, and a channel flow with an internal blockage. A finite element computer program (NSFLOW/P) for the 2-D, incompressible Navier-Stokes equations is also presented.

Kim, Sang-Wook↗

An unstructured body-of-revolution electromagnetic particle-in-cell algorithm with radial perfectly matched layers and dual polarizations

A novel electromagnetic particle-in-cell algorithm has been developed for fully kinetic plasma simulations on unstructured (irregular) meshes in complex body-of-revolution geometries. The algorithm, implemented in the BORPIC++ code, utilizes a set of field scalings and a coordinate mapping, reducing the Maxwell field problem in a cylindrical system to a Cartesian finite element Maxwell solver in the meridian plane. The latter obviates the cylindrical coordinate singularity in the symmetry axis. The choice of an unstructured finite element discretization enhances the geometrical flexibility of the BORPIC++ solver compared to the more traditional finite difference solvers. Symmetries in Maxwell’s equations are explored to decompose the problem into two dual polarization states with isomorphic representations that enable code reuse. The particle-in-cell scatter and gather steps preserve charge conservation at the discrete level. Our previous algorithm (BORPIC+) discretized the E and B field components of TE Φ and TM Φ polarizations on the finite element (primal) mesh. Here, we employ a new field-update scheme. Using the same finite element (primal) mesh, this scheme advances two sets of field components independently: (1) E and B of TE Φ polarized fields, (E z , E ρ , B Φ ) and (2) D and H of TM Φ polarized fields, (D Φ , H z , H ρ ). Since these field updates are not explicitly coupled, the new field solver obviates the coordinate singularity, which otherwise arises at the cylindrical symmetric axis, ρ = 0 when defining the discrete Hodge matrices (generalized finite element mass matrices). Here, a cylindrical perfectly matched layer is implemented as a boundary condition in the radial direction to simulate open space problems, with periodic boundary conditions in the axial direction. We investigate effects of charged particles moving next to the cylindrical perfectly matched layer. We model azimuthal currents arising from rotational motion of charged rings, which produce TMΦ polarized fields. Several numerical examples are provided to illustrate the first application of the algorithm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of wave processes in blocky media with porous and fluid-saturated interlayers

The wave processes in blocky media are analyzed by applying different mathematical models, wherein the elastic blocks interact with each other via pliant interlayers with the complex mechanical properties. Four versions of constitutive equations are considered. In the first version, an elastic interaction between the blocks is simulated within the framework of linear elasticity theory, and the model of elastic–plastic interlayers is constructed to take into account the appearance of irreversible deformation of interlayers at short time intervals. In the second one, the effects of viscoelastic shear in the interblock interlayers are taken into the consideration using the Poynting–Thomson rheological scheme. In the third option, the model of an elastic porous material is used in the interlayers, where the pores collapse if an abrupt compressive stress is applied. In the fourth case, the model of a fluid-saturated material with open pores is examined based on Biot's equations. The collapse of pores is modeled by the generalized rheological approach, wherein the mechanical properties of a material are simulated using four rheological elements. Three of them are the traditional elastic, viscous and plastic elements, the fourth element is the so-called rigid contact, which is used to describe the behavior of materials with the different resistance to tension and compression. It was shown that the thermodynamically consistent model is provided, which means that the energy balance equation is fulfilled for an entire blocky structure, where the kinetic and potential energy of the system is the sum of the kinetic and potential energies of the blocks and interlayers. Under numerical implementation of the interlayers models, the dissipationless finite difference Ivanov's method was used. The splitting method by spatial variables in the combination with the Godunov gap decay scheme was applied in the blocks. As a result, robust and stable computational algorithms are built and tested. Using MPI technology, the parallel software was designed for the modeling of wave processes in 2D setting. The numerical results are presented, discussed and future studies are outlined. - Highlights: • We model the propagation of waves in a blocky medium with compliant interlayers. • Models of porous and fluid saturated interlayers are proposed using Biot's approach. • A parallel computational algorithm is developed for supercomputers of cluster type. • Problems of instant rotation of central and boundary blocks are solved numerically. • Wave motions are compared in the cases of elastic and fluid-saturated interlayers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A first-order time-domain Green's function approach to supersonic unsteady flow

A time-domain Green's Function Method for unsteady supersonic potential flow around complex aircraft configurations is presented. The focus is on the supersonic range wherein the linear potential flow assumption is valid. The Green's function method is employed in order to convert the potential-flow differential equation into an integral one. This integral equation is then discretized, in space through standard finite-element technique, and in time through finite-difference, to yield a linear algebraic system of equations relating the unknown potential to its prescribed co-normalwash (boundary condition) on the surface of the aircraft. The arbitrary complex aircraft configuration is discretized into hyperboloidal (twisted quadrilateral) panels. The potential and co-normalwash are assumed to vary linearly within each panel. Consistent with the spatial linear (first-order) finite-element approximations, the potential and co-normalwash are assumed to vary linearly in time. The long range goal of our research is to develop a comprehensive theory for unsteady supersonic potential aerodynamics which is capable of yielding accurate results even in the low supersonic (i.e., high transonic) range.

Freedman, M. I.↗

A comparative study of Navier-Stokes codes for high-speed flows

A comparative study was made with four different codes for solving the compressible Navier-Stokes equations using three different test problems. The first of these cases was hypersonic flow through the P8 inlet, which represents inlet configurations typical of a hypersonic airbreathing vehicle. The free-stream Mach number in this case was 7.4. This 2-D inlet was designed to provide an internal compression ratio of 8. Initial calculations were made using two state-of-the-art finite-volume upwind codes, CFL3D and USA-PG2, as well as NASCRIN, a code which uses the unsplit finite-difference technique of MacCormack. All of these codes used the same algebraic eddy-viscosity turbulence model. In the experiment, the cowl lip was slightly blunted; however, for the computations, a sharp cowl leading edge was used to simplify the construction of the grid. The second test problem was the supersonic (Mach 3.0) flow in a three-dimensional corner formed by the intersection of two wedges with equal wedge angles of 9.48 degrees. The flow in such a corner is representative of the flow in the corners of a scramjet inlet. Calculations were made for both laminar and turbulent flow and compared with experimental data. The three-dimensional versions of the three codes used for the inlet study (CFL3D, USA-PG3, and SCRAMIN, respectively) were used for this case. For the laminar corner flow, a fourth code, LAURA, which also uses recently-developed upwind technology, was also utilized. The final test case is the two-dimensional hypersonic flow over a compression ramp. The flow is laminar with a free-stream Mach number of 14.1. In the experiment, the ramp angle was varied to change the strength of the ramp shock and the extent of the viscous-inviscid interaction. Calculations were made for the 24-degree ramp configuration which produces a large separated-flow region that extends upstream of the corner.

Rudy, David H.↗

Second-Order Sensitivity Analysis of Uncollided Particle Contributions to Radiation Detector Responses

This work presents an application of Cacuci’s Second-Order Adjoint Sensitivity Analysis Methodology (2nd-ASAM) to the simplified Boltzmann equation that models the transport of uncollided particles through a medium to compute efficiently and exactly all of the first- and second-order derivatives (sensitivities) of a detector’s response with respect to the system’s isotopic number densities, microscopic cross sections, source emission rates, and detector response function. The off-the-shelf PARTISN multigroup discrete ordinates code is employed to solve the equations underlying the 2nd-ASAM. The accuracy of the results produced using PARTISN is verified by using the results of three test configurations: (1) a homogeneous sphere, for which the response is the exactly known total uncollided leakage, (2) a multiregion two-dimensional (r-z) cylinder, and (3) a two-region sphere for which the response is a reaction rate. For the homogeneous sphere, results for the total leakage as well as for the respective first- and second-order sensitivities are in excellent agreement with the exact benchmark values. For the nonanalytic problems, the results obtained by applying the 2nd-ASAM to compute sensitivities are in excellent agreement with central-difference estimates. The efficiency of the 2nd-ASAM is underscored by the fact that, for the cylinder, only 12 adjoint PARTISN computations were required by the 2nd-ASAM to compute all of the benchmark’s 18 first-order sensitivities and 224 second-order sensitivities, in contrast to the 877 PARTISN calculations needed to compute the respective sensitivities using central finite differences, and this number does not include the additional calculations that were required to find appropriate values of the perturbations to use for the central differences.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗