Search NASA⌕ Search

SEARCH · Search NASA

Results for “implicit methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Overview of the NASA Glenn Flux Reconstruction Based High-Order Unstructured Grid Code

A computational fluid dynamics code based on the flux reconstruction (FR) method is currently being developed at NASA Glenn Research Center to ultimately provide a large- eddy simulation capability that is both accurate and efficient for complex aeropropulsion flows. The FR approach offers a simple and efficient method that is easy to implement and accurate to an arbitrary order on common grid cell geometries. The governing compressible Navier-Stokes equations are discretized in time using various explicit Runge-Kutta schemes, with the default being the 3-stage/3rd-order strong stability preserving scheme. The code is written in modern Fortran (i.e., Fortran 2008) and parallelization is attained through MPI for execution on distributed-memory high-performance computing systems. An h- refinement study of the isentropic Euler vortex problem is able to empirically demonstrate the capability of the FR method to achieve super-accuracy for inviscid flows. Additionally, the code is applied to the Taylor-Green vortex problem, performing numerous implicit large-eddy simulations across a range of grid resolutions and solution orders. The solution found by a pseudo-spectral code is commonly used as a reference solution to this problem, and the FR code is able to reproduce this solution using approximately the same grid resolution. Finally, an examination of the code's performance demonstrates good parallel scaling, as well as an implementation of the FR method with a computational cost/degree- of-freedom/time-step that is essentially independent of the solution order of accuracy for structured geometries.

High-Order Methods↗

Numerical solution of 3D Navier-Stokes equations with upwind implicit schemes

An upwind MUSCL type implicit scheme for the three-dimensional Navier-Stokes equations is presented. Comparison between different approximate Riemann solvers (Roe and Osher) are performed and the influence of the reconstructions schemes on the accuracy of the solution as well as on the convergence of the method is studied. A new limiter is introduced in order to remove the problems usually associated with non-linear upwind schemes. The implementation of a diagonal upwind implicit operator for the three-dimensional Navier-Stokes equations is also discussed. Finally the turbulence modeling is assessed. Good prediction of separated flows are demonstrated if a non-equilibrium turbulence model is used.

Marx, Yves P.↗

An accurate conservative level set/ghost fluid method for simulating turbulent atomization

This paper presents a novel methodology for simulating incompressible two-phase flows by combining an improved version of the conservative level set technique introduced in [E. Olsson, G. Kreiss, A conservative level set method for two phase flow, J. Comput. Phys. 210 (2005) 225-246] with a ghost fluid approach. By employing a hyperbolic tangent level set function that is transported and re-initialized using fully conservative numerical schemes, mass conservation issues that are known to affect level set methods are greatly reduced. In order to improve the accuracy of the conservative level set method, high order numerical schemes are used. The overall robustness of the numerical approach is increased by computing the interface normals from a signed distance function reconstructed from the hyperbolic tangent level set by a fast marching method. The convergence of the curvature calculation is ensured by using a least squares reconstruction. The ghost fluid technique provides a way of handling the interfacial forces and large density jumps associated with two-phase flows with good accuracy, while avoiding artificial spreading of the interface. Since the proposed approach relies on partial differential equations, its implementation is straightforward in all coordinate systems, and it benefits from high parallel efficiency. The robustness and efficiency of the approach is further improved by using implicit schemes for the interface transport and re-initialization equations, as well as for the momentum solver. The performance of the method is assessed through both classical level set transport tests and simple two-phase flow examples including topology changes. It is then applied to simulate turbulent atomization of a liquid Diesel jet at Re=3000. The conservation errors associated with the accurate conservative level set technique are shown to remain small even for this complex case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-order methods for wind turbine simulations and moving to next-generation platforms

The goal of the ExaWind project is to enable predictive simulations of wind farms comprised of many megawatt-scale turbines situated in complex terrain. Predictive simulations will require computational fluid dynamics (CFD) simulations for which the mesh resolves the geometry of the turbines and captures the rotation and large deflections of blades. Whereas such simulations for a single turbine are arguably petascale class, multi-turbine wind farm simulations will require exascale-class resources. The primary physics codes in the ExaWind project are Nalu-Wind, which is an unstructured-grid solver for the acoustically incompressible Navier-Stokes equations, and OpenFAST, which is a whole-turbine simulation code. The Nalu-Wind model consists of the mass-continuity Poisson-type equation for pressure and a momentum equation for the velocity. For such modeling approaches, simulation times are dominated by linear-system setup and solution for the continuity and momentum systems. For the ExaWind challenge problem, the moving meshes greatly affect overall solver costs as reinitialization of matrices and recomputation of preconditioners is required at every time step. This milestone represents an effort to increase the fidelity of Nalu-Wind at a fixed resolution through the implementation of a tensor-product based, matrix-free high order scheme. High order finite element methods have increased local work per datum communicated and have the potential to provide significantly more accurate solutions at a fixed number of degrees of freedom. Previous to this milestone, Nalu-Wind had an arbitrary order Control Volume Finite Element Method discretization as a solver option, but it required too much memory and was too slow to be of practical use. The work in this milestone addresses these issues by first implementing an implicit, high order solver that only partially assembles the global system. This reduces the memory footprint of the high-order scheme by orders of magnitude for higher polynomial orders. Second, a faster, tensor-product based method for evaluating the action of the left-hand side was implemented. This reduces the amount of computational work required by the scheme and dramatically enhanced the time-to-solution on example problems. Finally, this milestone is an evaluation of the value of high order methods in the wind application space. With the enhancements to memory and computational cost, accuracy vs. time-to-solution was evaluated for several resolutions on an under-resolved Taylor Green vortex test case. Results show that the high order scheme is cost-competitive with the production low-order schemes in Nalu-Wind, being moderately more expensive than the production edge-based vertex centered finite volume scheme. The evaluation of accuracy on the test case shows a potential benefit to high order at the highest resolution while not deteriorating accuracy on the lowest tested resolution. More work is needed to show value in the wind application, but positive strides have been made.

17 WIND ENERGY↗

Estimation of Surface Temperature and Heat Flux by Inverse Heat Transfer Methods Using Internal Temperatures Measured While Radiantly Heating a Carbon/Carbon Specimen up to 1920 F

The ability to solve the heat conduction equation is needed when designing materials to be used on vehicles exposed to extremely high temperatures; e.g. vehicles used for atmospheric entry or hypersonic flight. When using test and flight data, computational methods such as finite difference schemes may be used to solve for both the direct heat conduction problem, i.e., solving between internal temperature measurements, and the inverse heat conduction problem, i.e., using the direct solution to march forward in space to the surface of the material to estimate both surface temperature and heat flux. The completed research first discusses the methods used in developing a computational code to solve both the direct and inverse heat transfer problems using one dimensional, centered, implicit finite volume schemes and one dimensional, centered, explicit space marching techniques. The developed code assumed the boundary conditions to be specified time varying temperatures and also considered temperature dependent thermal properties. The completed research then discusses the results of analyzing temperature data measured while radiantly heating a carbon/carbon specimen up to 1920 F. The temperature was measured using thermocouple (TC) plugs (small carbon/carbon material specimens) with four embedded TC plugs inserted into the larger carbon/carbon specimen. The purpose of analyzing the test data was to estimate the surface heat flux and temperature values from the internal temperature measurements using direct and inverse heat transfer methods, thus aiding in the thermal and structural design and analysis of high temperature vehicles.

Pizzo, Michelle↗

High-speed compressible flow and other advection-dominated problems of fluid dynamics

Finite element methods are described for modeling high speed compressible flows with strong advection, problems important to aerodynamics. The situations are characterized by high pressure and temperature gradients, transients and the appearance of discontinuities, factors which require mesh refinement during computations. Techniques are developed for temporal and spatial discretization of a model problem. Several observations are made regarding the explicit and implicit features of the calculations, the use of the Lax-Wendroff scheme to produce a mass-matrix for obtaining accurate results for transients, methods of performing stability analyses, and simplification techniques. Examples are provided of solving the nonlinear shallow-water equations and describing compressible flows, particularly transonic flows. Domain splitting is defined for improving the calculations at each time step and in different parts of the flow regime while simultaneously advancing the calculations towards a solution.

Zienkiewicz, O. C.↗

Interpreting the Coulomb-field approximation for generalized-Born electrostatics using boundary-integral equation theory.

The importance of molecular electrostatic interactions in aqueous solution has motivated extensive research into physical models and numerical methods for their estimation. The computational costs associated with simulations that include many explicit water molecules have driven the development of implicit-solvent models, with generalized-Born (GB) models among the most popular of these. In this paper, we analyze a boundary-integral equation interpretation for the Coulomb-field approximation (CFA), which plays a central role in most GB models. This interpretation offers new insights into the nature of the CFA, which traditionally has been assessed using only a single point charge in the solute. The boundary-integral interpretation of the CFA allows the use of multiple point charges, or even continuous charge distributions, leading naturally to methods that eliminate the interpolation inaccuracies associated with the Still equation. This approach, which we call boundary-integral-based electrostatic estimation by the CFA (BIBEE/CFA), is most accurate when the molecular charge distribution generates a smooth normal displacement field at the solute-solvent boundary, and CFA-based GB methods perform similarly. Conversely, both methods are least accurate for charge distributions that give rise to rapidly varying or highly localized normal displacement fields. Supporting this analysis are comparisons of the reaction-potential matrices calculated using GB methods and boundary-element-method (BEM) simulations. An approximation similar to BIBEE/CFA exhibits complementary behavior, with superior accuracy for charge distributions that generate rapidly varying normal fields and poorer accuracy for distributions that produce smooth fields. This approximation, BIBEE by preconditioning (BIBEE/P), essentially generates initial guesses for preconditioned Krylov-subspace iterative BEMs. Thus, iterative refinement of the BIBEE/P results recovers the BEM solution; excellent agreement is obtained in only a few iterations. The boundary-integral-equation framework may also provide a means to derive rigorous results explaining how the empirical correction terms in many modern GB models significantly improve accuracy despite their simple analytical forms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scalable parallel methods for monolithic coupling in fluid-structure interaction with application to blood flow modeling

We introduce and study numerically a scalable parallel finite element solver for the simulation of blood flow in compliant arteries. The incompressible Navier-Stokes equations are used to model the fluid and coupled to an incompressible linear elastic model for the blood vessel walls. Our method features an unstructured dynamic mesh capable of modeling complicated geometries, an arbitrary Lagrangian-Eulerian framework that allows for large displacements of the moving fluid domain, monolithic coupling between the fluid and structure equations, and fully implicit time discretization. Simulations based on blood vessel geometries derived from patient-specific clinical data are performed on large supercomputers using scalable Newton-Krylov algorithms preconditioned with an overlapping restricted additive Schwarz method that preconditions the entire fluid-structure system together. The algorithm is shown to be robust and scalable for a variety of physical parameters, scaling to hundreds of processors and millions of unknowns.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Systematic uncertainties in the Monte Carlo calculation of ion chamber replacement correction factors

In a previous study [Med. Phys. 35, 1747-1755 (2008)], the authors proposed two direct methods of calculating the replacement correction factors (P{sub repl} or p{sub cav}p{sub dis}) for ion chambers by Monte Carlo calculation. By ''direct'' we meant the stopping-power ratio evaluation is not necessary. The two methods were named as the high-density air (HDA) and low-density water (LDW) methods. Although the accuracy of these methods was briefly discussed, it turns out that the assumption made regarding the dose in an HDA slab as a function of slab thickness is not correct. This issue is reinvestigated in the current study, and the accuracy of the LDW method applied to ion chambers in a {sup 60}Co photon beam is also studied. It is found that the two direct methods are in fact not completely independent of the stopping-power ratio of the two materials involved. There is an implicit dependence of the calculated P{sub repl} values upon the stopping-power ratio evaluation through the choice of an appropriate energy cutoff {Delta}, which characterizes a cavity size in the Spencer-Attix cavity theory. Since the {Delta} value is not accurately defined in the theory, this dependence on the stopping-power ratio results in a systematic uncertainty on the calculated P{sub repl} values. For phantom materials of similar effective atomic number to air, such as water and graphite, this systematic uncertainty is at most 0.2% for most commonly used chambers for either electron or photon beams. This uncertainty level is good enough for current ion chamber dosimetry, and the merits of the two direct methods of calculating P{sub repl} values are maintained, i.e., there is no need to do a separate stopping-power ratio calculation. For high-Z materials, the inherent uncertainty would make it practically impossible to calculate reliable P{sub repl} values using the two direct methods.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A generalized hyperbolic marching method for chemically reacting 3-D supersonic flow using a splitting technique

A generalized hyperbolic marching method employing a nonorthogonal coordinate system and using a split differencing scheme for calculating steady supersonic flow over aerodynamic shapes is presented. It is a second-order-accurate mixed explicit-implicit procedure that solves the inviscid adiabatic and nondiffusive equations for chemically reacting flow in integral conservation-law form. The relationship between the integral and differential forms of the equations are examined and the relative merits of each discussed. The method admits initial Cauchy data situated on any arbitrary surface and integrates them forward along a general curvilinear coordinate, distorting and deforming the surface as it advances. The chemical kinetics term is split from the convective terms which are themselves dimensionally split, thereby freeing the fluid operators from the restricted step-size imposed by the chemical reactions and increasing the computational efficiency. The accuracy of this splitting technique is analyzed, a sufficient stability criterion is established, and comparisons are made with another method.

Rizzi, A. W.↗

Adaptive immersed isogeometric level-set topology optimization

Here, this paper presents for the first time an adaptive immersed approach for level-set topology optimization using higher-order truncated hierarchical B-spline discretizations for design and state variable fields. Boundaries and interfaces are represented implicitly by the iso-contour of one or multiple level-set functions. An immersed finite element method, the eXtended IsoGeometric Analysis, is used to predict the physical response. The proposed optimization framework affords different adaptively refined higher-order B-spline discretizations for individual design and state variable fields. The increased continuity of higher-order B-spline discretizations together with local refinement enables direct control over the accuracy of the representation of each field while simultaneously reducing computational cost compared to uniformly refined discretizations. A flexible mesh adaptation strategy enables local refinement based on geometric measures or physics-based error indicators. These adaptive discretization and analysis approaches are integrated into gradient-based optimization schemes, evaluating the design sensitivities using the adjoint method. Numerical studies illustrate the features of the proposed framework with static, linear elastic, multi-material, two- and three-dimensional problems. The examples provide insight into the effect of refining the design variable field on the optimization result and the convergence rate of the optimization process. Using coarse higher-order B-spline discretizations for level-set fields promotes the development of smooth designs and suppresses the emergence of small features. Moreover, adaptive mesh refinement for state variable fields results in a reduction of overall computational cost. Higher-order B-spline discretizations are especially interesting when evaluating gradients of state variable fields due to their higher inter-element continuity.

36 MATERIALS SCIENCE↗

An enriched finite element model with q-refinement for radiative boundary layers in glass cooling

Radiative cooling in glass manufacturing is simulated using the partition of unity finite element method. The governing equations consist of a semi-linear transient heat equation for the temperature field and a stationary simplified P{sub 1} approximation for the radiation in non-grey semitransparent media. To integrate the coupled equations in time we consider a linearly implicit scheme in the finite element framework. A class of hyperbolic enrichment functions is proposed to resolve boundary layers near the enclosure walls. Using an industrial electromagnetic spectrum, the proposed method shows an immense reduction in the number of degrees of freedom required to achieve a certain accuracy compared to the conventional h-version finite element method. Furthermore the method shows a stable behaviour in treating the boundary layers which is shown by studying the solution close to the domain boundaries. The time integration choice is essential to implement a q-refinement procedure introduced in the current study. The enrichment is refined with respect to the steepness of the solution gradient near the domain boundary in the first few time steps and is shown to lead to a further significant reduction on top of what is already achieved with the enrichment. The performance of the proposed method is analysed for glass annealing in two enclosures where the simplified P{sub 1} approximation solution with the partition of unity method, the conventional finite element method and the finite difference method are compared to each other and to the full radiative heat transfer as well as the canonical Rosseland model.

97 MATHEMATICS AND COMPUTING↗

CTF-R: A novel residual-based thermal hydraulic solver

The traditional scientific process has been revolutionized by the advent of computational modeling, but the nuclear industry generally uses "legacy codes," which were developed early in the evolution of computers. One example of a legacy code, the thermal hydraulic subchannel code CTF, is modernized in this work through the development of a novel residual-based version, CTF-R. Unlike its predecessor, CTF-R is not limited by the strict computational limitations of the early 1980's, and can therefore be designed such that it is inherently flexible and easy to use. A case study is examined to demonstrate how the flexibility of the code can be used to improve simulation results. In this example, the coupling between the solid and liquid fields is examined. Traditionally, this coupling is modeled explicitly, which imposes numerical stability limits on the time step size. These limits are derived and it is shown that they are removed when the coupling is made implicit. Further, the development of CTF-R will enable future improvements in next generation reactor modeling, numerical methods, and coupling to other codes. Through the further development of CTF-R and other residual-based codes, state-of-the-art simulation is possible.

42 ENGINEERING↗

Voltage equilibration for reactive atomistic simulations of electrochemical processes

We introduce electrochemical dynamics with implicit degrees of freedom (EChemDID), a model to describe electrochemical driving force in reactive molecular dynamics simulations. The method describes the equilibration of external electrochemical potentials (voltage) within metallic structures and their effect on the self-consistent partial atomic charges used in reactive molecular dynamics. An additional variable assigned to each atom denotes the local potential in its vicinity and we use fictitious, but computationally convenient, dynamics to describe its equilibration within connected metallic structures on-the-fly during the molecular dynamics simulation. This local electrostatic potential is used to dynamically modify the atomic electronegativities used to compute partial atomic changes via charge equilibration. Validation tests show that the method provides an accurate description of the electric fields generated by the applied voltage and the driving force for electrochemical reactions. We demonstrate EChemDID via simulations of the operation of electrochemical metallization cells. The simulations predict the switching of the device between a high-resistance to a low-resistance state as a conductive metallic bridge is formed and resistive currents that can be compared with experimental measurements. In addition to applications in nanoelectronics, EChemDID could be useful to model electrochemical energy conversion devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PROTEUS-MOC User Manual

The PROTEUS-MOC code is a three-dimensional (3D) neutron transport code based on the finite element mesh and the method of characteristics (MOC) which combines a 2D MOC with the discontinuous Galerkin finite element method for the axial direction. Thus, for PROTEUS-MOC, a 3D geometry is represented with by the implicit extrusion of a single 2D planar geometry with different material assignments allowable on each plane. The code requires four input files for a steady-state calculation without the thermal feedback: a driver input, a mesh input, a cross section input, and a material assignment input. With thermal feedback, a T/H input file is needed. For kinetics, a kinetics driver input file is required. The PROTEUS-MOC software produces a text output file as well as a data file which includes integral and average quantities such on fluxes, powers, temperatures, densities, etc. The detailed output file can be converted to the VTK format using the post processing code so that the outputs can be visualized using a visualization software such as VisIt.

97 MATHEMATICS AND COMPUTING↗

Addressing key physics problems in high-energy-density plasmas with a novel kinetic simulation capability

Many important physical processes in inertial confinement fusion (ICF) and dense Z-pinch (DZP) experiments require a kinetic (velocity-space-dependent) description. Conventional particle-in-cell (PIC) methods are poorly suited for high-energy-density (HED) plasmas, due to restrictive time-step constraints and the inability to conserve energy. In a previous LDRD (21-FS-048), we demonstrated that a fully implicit PIC formulation overcomes these limitations: it conserves energy even when coupled with Coulomb collision models and can be solved efficiently with large grid cells and large time steps. Thus, it is feasible to use this method to study kinetic effects in ICF and DZP plasmas on hydro-like time and spatial scales. In this follow-on LDRD, we advanced this methodology into a high-fidelity tool for production-scale simulations and used it to answer key questions relevant to ICF and DZP experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock diffraction computations over complex structures

This work contains the results of a study aimed at the development of two- and three-dimensional numerical procedures for computing the flowfield generated by the interaction of a blast wave and a rigid body. A number of numerical procedures were applied to two-dimensional problems including both implicit and explicit algorithms. Each was tried on the blast wave-cylinder interaction problem. MacCormack's (1969) method with added fourth-order dissipation yielded the best results and was then applied to the blast wave-truck interaction problems in two dimensions. MacCormack's method was also used in three dimensions to determine the flowfield that results when a blast wave strikes a rectangular parallelepiped at an arbitrary angle. Both the twoand three-dimensional computations were compared with experiments in a number of ways. Two dimensional density contours show qualitative agreement for shock front location and Mach stem formation with spark shadowgraphs taken in a shock tube. Pressure-time histories indicate good quantitative agreement between theory and experiment both in two- and three-dimensions.

Mark, A.↗

Unsteady solution of incompressible Navier-Stokes equations

The numerical scheme used by the present time-accurate FEM numerical method for incompressible Navier-Stokes equations, using primitive variables as the unknowns, is a Crank-Nicholson implicit treatment of all equation terms with central differencing for space derivatives. The introduction of a continuous auxilliary system in pseudo-time, with artificial compressibility, yields the incompressible solution at the advanced time level; time-accurate solutions are thereby obtained for two-dimensional fluid flows in a square cavity, in the cases of both an impulsively starting lid and an oscillating lid.

Soh, W. Y.↗