Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Methyl Ketones from Municipal Solid Waste Blends by One‐Pot Ionic‐Liquid Pretreatment, Saccharification, and Fermentation

Abstract The conversion of municipal solid waste (MSW) and lignocellulosic biomass blends to methyl ketones (MKs) was investigated by using bioderived ionic liquid (bionic liquid)‐based hydrolysates followed by fermentation with an engineered Escherichia coli strain. The hydrolysates were produced by a one‐pot process using six types of MSW–biomass blends, choline‐based bionic liquids, and commercial enzymes. Based on the sugar yields, one blend (corn stover/MSW=95:5, w / w ) and two bionic liquids {cholinium lysinate ([Ch][Lys]) and cholinium aspartate ([Ch] 2 [Asp])} were selected for scale‐up studies. Maximum yields of 82.3 % glucose and 54.4 % xylose were obtained from the selected blend in the scale‐up studies (6 L), which was comparable with 83.6 % glucose and 52.8 % xylose obtained at a smaller scale (0.2 L). Comparable or higher yields of medium‐chain (C 11 –C 17 ) MKs were achieved by using the MSW–biomass blend‐derived hydrolysates, relative to the sugar controls (glucose and xylose) with similar sugar feeding concentrations. Up to 1145 mg L −1 of MKs was produced by using MSW–biomass‐derived hydrolysates, and the MK titer decreased to 300 mg L −1 when the bionic‐liquid concentration in the hydrolysate increased from 1 to 2 %, indicative of bionic‐liquid inhibition. Technoeconomic analysis was conducted to investigate the economic potential of using the selected MSW–biomass blend as a feedstock to produce MKs.

Yan, Jipeng↗

Microwave Regeneration and Thermal and Oxidative Stability of Imidazolium Cyanopyrrolide Ionic Liquid for Direct Air Capture of Carbon Dioxide

Abstract Understanding the oxidative and thermal degradation of CO 2 sorbents is essential for assessing long‐term sorbent stability in direct air capture (DAC). The potential degradation pathway of imidazolium cyanopyrrolide, an ionic liquid (IL) functionalized for superior CO 2 capacity and selectivity, is evaluated under accelerated degradation conditions to elucidate the secondary reactions that can occur during repetitive absorption‐desorption thermal‐swing cycles. The combined analysis from various spectroscopic, chromatographic, and thermal gravimetric measurements indicated that radical and S N 2 mechanisms in degradation are encouraged by the nucleophilicity of the anion. Thickening of the liquid and gas evolution are accompanied by 50 % reduction in CO 2 capacity after a 7‐day exposure to O 2 under 80 °C. To prevent long exposure to conventional thermal heating, microwave (MW) regeneration of the CO 2 ‐reactive IL is used, where dielectric heating at 80 and 100 °C rapidly desorbs CO 2 and regenerates the IL without any measurable degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissolution of the rare-earth mineral bastnaesite by acidic amide ionic liquid for recovery of critical

Rare-earth elements provide the cornerstones to clean sustainable energy and modern technologies such as computers, communications, and transportation. As such, the recovery of rare earths (REs) from minerals such as bastnaesite remains important for modern times. As the light lanthanides (La–Nd) constitute the majority (typically > 98.7 %) of the REs in bastnaesite with the heavy REs (Sm–Lu) contributing the remainder (approximately 1.3 %), an enrichment of heavier REs may serve as an effective means of assisting rare-earth recovery. Such an extractive metallurgy process involving ionic liquids (ILs) leads to an enrichment of heavy REs by nearly an order of magnitude. The acidic IL N,N-dimethylacetamidium bis(trifluoromethylsulfonyl)imide (DMAH+NTf 2 – ) in the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM + NTf 2 – ) dissolves froth flotation bastnaesite, synthetic bastnaesite analogues (RECO 3 F), RE 2 O 3 , and RE 2 (CO 3 ) 3 minerals. Furthermore, an overall reaction for the dissolution of bastnaesite is proposed for this IL system. This IL system may provide the initial stages of a greater RE separation scheme for bastnaesite froth flotation concentrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical Measurement of Gold Oxide Reduction and Methods for Acid Neutralization and Minimization of Water in Wet Ionic Liquid

The formation and reduction of gold oxide in wet ionic liquid (IL), N-trimethyl-N-butylammonium bis(trifluoromethanesulfonyl)imide, ([Me 3 N n Bu][TFSI]) is examined. The water concentration is determined using both the charge and peak current from the reduction of gold oxide and compared directly with Karl Fischer data. The quantitative determination of water in the IL is demonstrated for concentrations between 0.09 and 0.74 by weight (w%). The treatment of wet IL with dry nitrogen or molecular sieves reduces the water below background levels. Finally, methods for acid neutralization and the reduction of water with molecular sieves are conducted to minimize their impact on subsequent electrochemical measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High‐throughput screening of aqueous biphasic systems with ionic liquids as additives for extraction and purification of enveloped virus‐like particles

Due to their unique properties, virus‐like particles (VLPs) have been portrayed as a promising high‐value biopharmaceutical in VLP‐based vaccination and cancer therapy. Nevertheless, due to limited physical and economical capabilities of the current downstream processing of VLPs, their production is still difficult and seen as a major problem that needs to be tackled. In this work, high‐throughput screening on a liquid handling station (LHS) has been implemented for efficient selection of adequate polymer‐salt aqueous biphasic systems (ABS) for extraction and purification of enveloped Hepatitis C virus pseudoparticles (HCVpp). The effect of polyethylene glycol (PEG) molecular weight and salt type (citrate, sulfate, and phosphate) was first evaluated. Furthermore, to optimize extraction parameters, the effect of pH and tie‐line lengths (TLL) was also addressed. For the most promising ABS and extraction conditions, the addition of ten ionic liquids (ILs) as adjuvants was investigated. Insights on the chemical features of ILs that impact HCV‐VLPs partitioning are highlighted. Finally, the potential of studied ABS containing ILs as adjuvants in the extraction and purification of VLPs from cell culture supernatants was addressed. The 100% extraction efficiency of VLPs in the PEG‐rich phase was achieved, and VLP purity was increased compared to the system without IL. In conclusion, these promising results show that ILs can be very effective in modulating the phase properties of polymer‐salt ABS, achieving high HCV‐VLP purification.

Marchel, Mateusz↗

Ionic Liquid Facilitated Solvent‐Phase Polymerization of Ultrasmooth Coatings of Polycatecholamines

Mussel-inspired polycatecholamine coatings and films have proven to be versatile materials for surface modification. However, the progress of chemically modified coatings with tailored properties has been slow due to the lack of definitive evidence of their polymeric structure. Polycatecholamines form aggregates during polymerization, and their formation mechanism has been a subject of debate owing to their insolubility in traditional molecular solvents. Exploiting the capability of ionic liquids (ILs) to exhibit strong electrostatic interactions, herein, the first solution-phase polymerization approach is reported to achieve polymerization of four catecholamines – dopamine (DA), norepinephrine (NE), L-3,4-dihydroxyphenylalanine (L-DOPA), and adrenaline (AD). Kinetic control over the polymerization process in the solution phase enabled it to follow the process with 1 H NMR spectroscopy, revealing the formation of structural features of resulting complex heterogeneous and soluble polymers. The polymers are both covalent and associative in nature. Solution phase polymerization prevented the formation of large aggregates in the solution, thus facilitating the formation of coatings that are ultra-smooth and have root mean square roughness of the order of sub-nm to nm scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Screening for High Conductivity/Low Viscosity Ionic Liquids Using Product Descriptors

We seek to optimize Ionic liquids (ILs) for application to redox flow batteries. As part of this effort, we have developed a computational method for suggesting ILs with high conductivity and low viscosity. Since ILs consist of cation-anion pairs, we consider a method for treating ILs as pairs using product descriptors for QSPRs, a concept borrowed from the prediction of protein-protein interactions in bioinformatics. We demonstrate the method by predicting electrical conductivity, viscosity, and melting point on a dataset taken from the ILThermo database on June 18th, 2014. The dataset consists of 4,329 measurements taken from 165 ILs made up of 72 cations and 34 anions. In conclusion, we benchmark our QSPRs on the known values in the dataset then extend our predictions to screen all 2,448 possible cation-anion pairs in the dataset.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic Liquid–Directed Nanoporous TiNb 2 O 7 Anodes with Superior Performance for Fast–Rechargeable Lithium–Ion Batteries

Nanoporous TiNb 2 O 7 (NPTNO) material is synthesized by a sol–gel method with an ionic liquid (IL) as the nanoporous structure directing template. NPTNO exhibits a high reversible capacity of 210 mAh g –1 even at the charging rate of 50 C and an excellent cyclability of half-cell capacity retention of 74% for 1000 cycles at 5 C and LiNi 0.5 Mn 1.5 O 4 -coupled full-cell capacity retentions of 81% and 87% for 1000 cycles at 1 C and 2 C, respectively. The studies of the 1000 cycled NPTNO electrode illustrate that the IL-directed mesoporous structure can enhance the cyclability of NPTNO cells due to the alleviation of repetitive mechanical stress and volume fluctuation induced by the repetitive Li + insertion-extraction processes. The measured Li + diffusion coefficients from the galvanostatic intermittent titration technique suggest that the IL-templating strategy indeed ensures the fast rechargeability of NPTNO cells based on the fast Li + diffusion kinetics. Benefitting from the nanoporous structure, NPTNO with unhindered Li + diffusion pathways achieves a superior rate capability in the titanium-based oxide materials and the best full-cell cyclability in the TNO materials. Furthermore, the templating potential of IL is demonstrated, and the superb electrochemical performance establishes the IL-directed NPTNO as a promising anode candidate for fast-rechargeable LIBs.

25 ENERGY STORAGE↗

Organometallic Synthesis of Bimetallic Cobalt‐Rhodium Nanoparticles in Supported Ionic Liquid Phases (Co x Rh 100− x @SILP) as Catalysts for the Selective Hydrogenation of Multifunctional Aromatic Substrates

Abstract The synthesis, characterization, and catalytic properties of bimetallic cobalt‐rhodium nanoparticles of defined Co:Rh ratios immobilized in an imidazolium‐based supported ionic liquid phase (Co x Rh 100− x @SILP) are described. Following an organometallic approach, precise control of the Co:Rh ratios is accomplished. Electron microscopy and X‐ray absorption spectroscopy confirm the formation of small, well‐dispersed, and homogeneously alloyed zero‐valent bimetallic nanoparticles in all investigated materials. Benzylideneacetone and various bicyclic heteroaromatics are used as chemical probes to investigate the hydrogenation performances of the Co x Rh 100− x @SILP materials. The Co:Rh ratio of the nanoparticles is found to have a critical influence on observed activity and selectivity, with clear synergistic effects arising from the combination of the noble metal and its 3d congener. In particular, the ability of Co x Rh 100− x @SILP catalysts to hydrogenate 6‐membered aromatic rings is found to experience a remarkable sharp switch in a narrow composition range between Co 25 Rh 75 (full ring hydrogenation) and Co 30 Rh 70 (no ring hydrogenation).

Rengshausen, Simon↗

Bifunctional Ionic Covalent Organic Networks for Enhanced Simultaneous Removal of Chromium(VI) and Arsenic(V) Oxoanions via Synergetic Ion Exchange and Redox Process

Chromium (VI) and arsenic (V) oxoanions are major toxic heavy metal pollutants in water threatening both human health and environmental safety. Here, the development is reported of a bifunctional ionic covalent organic network (iCON) with integrated guanidinium and phenol units to simultaneously sequester chromate and arsenate in water via a synergistic ion-exchange-redox process. The guanidinium groups facilitate the ion-exchange-based adsorption of chromate and arsenate at neutral pH with fast kinetics and high uptake capacity, whereas the integrated phenol motifs mediate the Cr(VI)/Cr(III) redox process that immobilizes chromate and promotes the adsorption of arsenate via the formation of Cr(III)-As(V) cluster/complex. The synergistic ion-exchange-redox approach not only pushes high adsorption efficiency for both chromate and arsenate but also upholds a balanced Cr/As uptake ratio regardless of the change in concentration and the presence of interfering oxoanions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic‐Liquid Free and Flexible Transistors Made of 2D Material Inks

The development of thin-film transistors (TFTs) using 2D materials is crucial for enabling scalable, low-cost, and flexible electronics. Currently, 2D TFTs with the highest performance have been achieved by using ionic-liquid gating (ILG), a technique suited for proof-of-concept studies. However, ILG suffers from slow switching speeds, temperature sensitivity, poor long-term stability, and integration challenges, making it unsuitable for practical use. Moreover, typical fabrication methods for 2D TFTs involve harsh conditions such as strong acids or high temperatures (>300 °C), limiting integration with flexible substrates. This work provides the first demonstration of an ILG-free, all-2D-material TFT fabricated onto a flexible substrate. Water-based graphene and hexagonal boron nitride (h-BN) inks are printed to deposit the electrodes and dielectric layers, respectively. The MoS 2 channel is produced via supramolecular interfacial self-assembly, yielding uniform, monolayer-rich films transferable to rigid and flexible substrates. The resulting TFTs operate below 3 V, exhibit negligible leakage current, and achieve field-effect mobilities up to 0.46 cm 2 V −1 s −1 (rising to 2.47 cm 2 V −1 s −1 with silver electrodes) measured under ambient conditions, while maintaining excellent mechanical flexibility. This work establishes a low-cost and scalable solution-processable platform for flexible electronics based on 2D materials that match requirements for practical applications.

2D materials↗

Differential Many-Body Effects for Initial and Core Ionic States: Impact on XPS Spectra

In this paper, the contribution of many-body effects to the X-ray photoelectron spectroscopy, XPS, of an NO molecule is studied using wavefunction theory where the specific consequences of different many-body terms are examined and contrasted. It is shown that there is a differential importance of the many-body effects for the different configurations involved in the XPS. These are the ground, initial state configuration and final, N(1s) and O(1s) core hole ionic configurations. The consequences of the many-body effects are examined for the binding energies, BEs, to the two final state multiplets, triplet, and singlet, for each of the core ions and for the relative intensities of the XPS transitions to these multiplets. The many-body effects examined are those described as static effects that arise for individual terms that are important. The objective is to understand the chemical and physical origins that determine the importance of the correlation effects for the XPS, rather than to obtain very accurate predictions of the BEs. An important theoretical construct that is tested and justified is the equivalent core approximation where the core-ionized atom is replaced by the next higher element in the periodic table. This construct allows us to establish a correlation for the relative importance of the many-body effects in terms of effective charges of the different atoms. This is a correlation that has not been considered before and that we expect may have general relevance. The potential of the effects that we have identified for the XPS of NO to be relevant for the XPS of more complex, condensed phase systems is considered.

XPS, Static Correlation, Equivalent core model↗

Self-Trapped Excitons in Ionic-Covalent Silver Halide Crystals and Nanostructures: High-Frequency EPR, ESE, ENDOR and ODMR Studies

Silver halides have unique features in solid state physics because their properties are considered to be of borderline nature between ionic and covalent bonding. In AgCl, the self-trapped hole (STH) is centered and partly trapped in the cationic sublattice, forming an Ag 2+ ion inside of a (AgCl 6 ) 4- complex as a result of the Jahn–Teller distortion. The STH in AgCl can capture an electron from the conduction band forming the self-trapped exciton (STE). Recent results of a study of STE by means of high-frequency electron paramagnetic resonance, electron spin echo, electron–nuclear double resonance (ENDOR) and optically detected magnetic resonance (ODMR) are reviewed. The properties of the STE in AgCl crystals, such as exchange coupling, the ordering of the triplet and singlet sublevels, the dynamical properties of the singlet and triplet states, and the hyperfine interaction with the Ag and Cl (Br) nuclei are discussed. Direct information about the spatial distribution of the wave function of STE unpaired electrons was obtained by ENDOR. From a comparison with the results of an ENDOR study of the shallow electron center and STH, it is concluded that the electron is mainly contained in a hydrogen-like 1s orbital with a Bohr radius of 15.1 ± 0.6 Å , but near its center the electron density reflects the charge distribution of the hole. The hole of the STE is virtually identical to an isolated STH center. For AgCl nanocrystals embedded into the KCl crystalline matrix, the anisotropy of the g-factor of STE and STH was found to be substantially reduced compared with that of bulk AgCl crystals, which can be explained by a considerable suppression of the Jahn–Teller effect in nanoparticles. A study of ODMR in AgBr nanocrystals in KBr revealed spatial confinement effects and allowed estimating the nanocrystal size from the shape of the ODMR spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adhesion and Toxicity of Polymers Prepared Using Ionic Liquid Monomers

The focus of this research was to investigate possible applications of crosslinked polymers that could be prepared through free-radical polymerization of protic ionic liquid monomers. These monomers were synthesized through reactions of selected Bronsted acids and bases, and then polymerized with and without the aid of a free-radical initiator. It was discovered that these polymers had potential applications as adhesives, and bond strengths of various formulations were tested and compared with commercially available adhesives. Additionally, potential environmental toxicity of these polymers was investigated by performing zone of inhibition testing with select bacteria. It was determined that several of these polymers have comparable or superior bond strengths to other common adhesives, although monomer type and initiator concentration can impact these strengths. Toxicity was also dependent on these factors, with some formulations showing high toxicity and others showing few toxic effects.

36 MATERIALS SCIENCE↗

Isopiestic Determination of the Osmotic and Activity Coefficients of the { h H 2 SO 4 + (1– h )Al 2 (SO 4 ) 3 }(aq) System at T = 298.15 K. 1. Experimental Results at Stoichiometric Ionic Molality Factions h = (0.85777, 0.71534, 0.57337, 0.42985, 0.28593, and 0.14332)

Here, isopiestic vapor-pressure measurements have been made at 166 compositions of the { h H 2 SO 4 + (1– h )Al 2 (SO 4 ) 3 }(aq) system at the temperature 298.15 K using H 2 SO 4 (aq) as the isopiestic reference standard, where h is the stoichiometric ionic molality fraction of H 2 SO 4 in the mixtures that was calculated by assuming complete dissociation of both solutes. These experiments were performed up to the crystallization limits at values of h = (0.85777, 0.71534, 0.57337, 0.42985, 0.28593, and 0.14332) corresponding approximately to h = (6/7, 5/7, 4/7, 3/7, 2/7 and 1/7); the highest achieved molalities are very slightly above or close to the solubility limits because of the very limited tendency of Al 2 (SO 4 ) 3 to form supersaturated solutions when concentrated isothermally at 298.15 K.

36 MATERIALS SCIENCE↗

Characterization of CuO/n–Si pn junction synthesized by successive ionic layer adsorption and reaction method

Transparent conducting Copper oxide CuO thin films were successfully synthesized on glass and n-type Silicon substrates by successive ionic layer adsorption and reaction method. The crystal structure, surface texture, optical and electrical properties were studied. The results revealed that the deposited CuO thin films at different cycles number (5, 10, 15), have polycrystalline structure nature with monoclinic phase, and the crystallite size increases with the increase of cycles number. The average roughness and the root mean square values increase with increasing cycles number. The optical energy band gap and Urbach energy was decrement from 2.33 eV and 1.2 eV for 5 cycles to 2.1 eV and 0.82 eV for 15 cycles. The electrical properties of Ni/CuO/n–Si pn junction were studied using current–voltage (I–V) measurements. The barrier heights (Φ{sub B}) of Ni/CuO/n–Si thin films were calculated and its values are (0.716, 0.736, 0.723) eV, for 5, 10 and 15 cycles respectively with an applied bias voltage of 3 V.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Binding of gold(III) with silver(I) dipropyldithiocarbamate: supramolecular self-assembly (role of secondary Au…S and Ag…S bonds) and thermal behavior of the ionic-polymer complex ([Au(S{sub 2}CNPr{sub 2}){sub 2}][AgCl{sub 2}]){sub n}

The double ionic-polymer complex ([Au(S{sub 2}CNPr{sub 2}){sub 2}][AgCl{sub 2}]){sub n} (1) was prepared as an individual fixation form of gold(III) from NaCl solutions with silver(I) dipropyldithiocarbamate and was characterized by single-crystal X-ray diffraction and {sup 13}C magic-angle spinning (MAS) NMR spectroscopy. The structure of 1 comprises two nonequivalent centrosymmetric complex cations [Au(S{sub 2}CNPr{sub 2}){sub 2}]{sup +} (A and B) and the discrete linear anion [AgCl{sub 2}]{sup –}. Gold(III) cations are linked by pairs of unsymmetrical secondary Au…S bonds to form linear supramolecular chains (…A…B…)n. Neighboring cations are additionally linked by [AgCl{sub 2}]{sup –} anions via secondary Ag…S and Cl…S bonds, the anions being involved in the overall stabilization of the supramolecular structure. The cation–anion interactions lead to a distortion of the linear configuration of the [AgCl{sub 2}]{sup –} anion. The character of thermolysis of 1 accompanied by quantitative regeneration of bound Au and Ag was established by simultaneous thermal analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge-tagged N-heterocyclic carbenes (NHC): Direct transfer from ionic liquid solutions and long-lived nature in the gas phase

Negatively charge-tagged N-heterocyclic carbenes have been formed in solution via deprotonation of imidazolium ions bearing acid side groups and transferred to the gas phase via ESI(–)-MS. The structure of the putative and apparently stable gaseous carbenes formed in such conditions were then probed via reactions with carbon dioxide using a triple quadrupole mass spectrometer particularly optimized for ion/molecule reactions of ESI-generated ions. Complete conversion to imidazolium carboxylates was achieved, which seems to demonstrate the efficiency of the transfer, the gas-phase stability, and the long-lived nature of these unprecedented charge-tagged carbenes and their predominance in the ionic population. Comprehensive studies on the intrinsic reactivity of N-heterocyclic carbenes with silent charge tags are therefore possible. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗