Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Excitation optimization for damage detection

A technique is developed to answer the important question: 'Given limited system response measurements and ever-present physical limits on the level of excitation, what excitation should be provided to a system to make damage most detectable?' Specifically, a method is presented for optimizing excitations that maximize the sensitivity of output measurements to perturbations in damage-related parameters estimated with an extended Kalman filter. This optimization is carried out in a computationally efficient manner using adjoint-based optimization and causes the innovations term in the extended Kalman filter to be larger in the presence of estimation errors, which leads to a better estimate of the damage-related parameters in question. The technique is demonstrated numerically on a nonlinear 2 DOF system, where a significant improvement in the damage-related parameter estimation is observed.

42 ENGINEERING↗

A Review of Lattice-Boltzmann Models Coupled with Geochemical Modeling Applied for Simulation of Advanced Waterflooding and Enhanced Oil Recovery Processes

To maintain economic profit and improve the oil production efficiency after the primary and secondary production phase, advanced waterflooding techniques such as low salinity waterflooding in carbonate reservoirs have been investigated in numerical simulations, laboratory experiments, and field pilot tests. Multiple underlying mechanisms have been proposed based on these studies, and they are still under debate. Various numerical modeling approaches are introduced, but there exists a lack of a pore-scale comprehensive modeling scheme to fully understand the processes. Lattice-Boltzmann method (LBM) is a type of numerical fluid flow modeling technique that shows capabilities and flexibilities in modeling pore-scale fluid flow to integrate physical–chemical processes within complex structures. The intrinsic feature of LBM makes it a promising framework for simulating advanced waterflooding due to its flexibility, accuracy, and parallel efficiency. LBM works either by itself for solving reactive transport problems or by coupling with a third-party reaction solver. This review mainly introduces the LBM fluid flow and reactive transport capabilities and the concept and modeling approaches to simulate advanced waterflooding techniques. Meanwhile, an evaluation of the coupled LBM models for enhanced oil recovery (EOR) simulations is discussed with future research challenges and directions concluded.

02 PETROLEUM↗

Viscous shock-layer analysis of hypersonic flows over long slender bodies

Numerical solutions from the time-steady viscous shock-layer equations are presented for the hypersonic laminar and turbulent flow of a perfect gas over long slender bodies. These results are obtained from a spatial-marching implicit finite-difference technique. Detailed comparisons have been made with other predictions and experimental data to assess the accuracy of the present numerical technique, especially for slender-body flows. Results from the present method show that coupling the normal momentum and continuity equations and the use of the Vigneron pressure condition in the subsonic nose region give quite accurate and stable results. These results compare (with some exceptions) favorably with those obtained using PNS and other VSL methods.

Gupta, R. N.↗

Optical technique to characterize heavy rain

A technique to measure the size and velocity of raindrops is presented and experimental and numerical results discussed. The technique bases the droplet size on the absolute intensity of the light scattered when the droplets cross a laser-based probe volume. The velocity is obtained from the Doppler frequency. A size range of 0.1 mm to 9 mm was covered with overlapping ranges. Experiments were conducted with simulated rain sprays except that the local LWC was much larger than the values encountered in natural rain. The accuracy of the size measurement was not strongly affected by spray interference, but it showed a clear dependence with the droplet shape. A simple numerical model based on the light reflected from ellipsoids attempts to explain the relationship between droplet shape and absolute scattered light.

Hess, C. F.↗

Hydrogeophysical methods for analyzing aquifer storage and recovery systems

Hydrogeophysical methods are presented that support the siting and monitoring of aquifer storage and recovery (ASR) systems. These methods are presented as numerical simulations in the context of a proposed ASR experiment in Kuwait, although the techniques are applicable to numerous ASR projects. Bulk geophysical properties are calculated directly from ASR flow and solute transport simulations using standard petrophysical relationships and are used to simulate the dynamic geophysical response to ASR. This strategy provides a quantitative framework for determining site-specific geophysical methods and data acquisition geometries that can provide the most useful information about the ASR implementation. An axisymmetric, coupled fluid flow and solute transport model simulates injection, storage, and withdrawal of fresh water (salinity {approx}500 ppm) into the Dammam aquifer, a tertiary carbonate formation with native salinity approximately 6000 ppm. Sensitivity of the flow simulations to the correlation length of aquifer heterogeneity, aquifer dispersivity, and hydraulic permeability of the confining layer are investigated. The geophysical response using electrical resistivity, time-domain electromagnetic (TEM), and seismic methods is computed at regular intervals during the ASR simulation to investigate the sensitivity of these different techniques to changes in subsurface properties. For the electrical and electromagnetic methods, fluid electric conductivity is derived from the modeled salinity and is combined with an assumed porosity model to compute a bulk electrical resistivity structure. The seismic response is computed from the porosity model and changes in effective stress due to fluid pressure variations during injection/recovery, while changes in fluid properties are introduced through Gassmann fluid substitution.

54 ENVIRONMENTAL SCIENCES↗

Solving Two-Equation Turbulence Models With a Perspective on Solving Transport Equations

There are three principal objectives of this report. The first objective is to investigate frequently used two-equation models when solving the RANS equations. In this study, we consider the 2006Wilcox and the 2003 Menter Shear Stress Transport (SST) models. Also, a simple change of the Wilcox model is introduced to improve computational predictions for transonic flows. Computations for flows over two different airfoils are examined to compare these turbulence models. Effects on modeling the physics of each flow due to variations in the models, such as using either strainrate or vorticity in the turbulence production term, are considered and discussed. The second objective of this report is to not only explore but also evaluate the performance of the solution algorithm for the mean flow and the transport equations. The RANS and turbulence modeling equations aresolved in a weakly coupled manner with a diagonal implicit Runge-Kutta (DIRK) solution algorithm. Throughout this report, emphasis is given to reducing the residuals to machine zero in all flow calculations, so as to eliminate the error due to numerical integration of the discrete governing equations. The final objective is to provide a perspective on solving transport equations for turbulence modeling. Aspects of solving such stiff systems of equations, as well as various numerical difficulties and possible techniques to overcome them, are considered. Discussion is also provided concerning what is called ’numerical compatibility’, which is an essential requirement when designing a solution algorithm for solving transport equations.

turbulence modeling↗

The 2-loop matter power spectrum and the IR-safe integrand

Large scale structure surveys are likely the next leading probe of cosmological information. It is therefore crucial to reliably predict their observables. The Effective Field Theory of Large Scale Structures (EFTofLSS) provides a manifestly convergent perturbation theory for the weakly non-linear regime, where dark matter correlation functions are computed in an expansion of the wavenumber k over the wavenumber associated to the non-linear scale kNL. To push the predictions to higher wavenumbers, it is necessary to compute the 2-loop matter power spectrum. For equal-time correlators, exactly as with standard perturturbation theory, there are IR divergences present in each diagram that cancel completely in the final result. We develop a method by which all 2-loop diagrams are computed as one integral, with an integrand that is manifestly free of any IR divergences. This allows us to compute the 2-loop power spectra in a reliable way that is much less numerically challenging than standard techniques. We apply our method to scaling universes where the linear power spectrum is a single power law of k, and where IR divergences can particularly easily interfere with accurate evaluation of loop corrections if not handled carefully. In conclusion, we show that our results are independent of IR cutoff and, after renormalization, of the UV cutoff, and comment how the method presented here naturally generalizes to higher loops.

79 ASTRONOMY AND ASTROPHYSICS↗

Errors in reduction methods

A mathematical basis is given for comparing the relative merits of various techniques used to reduce the order of large linear and nonlinear dynamics problems during their numerical integration. In such techniques as Guyan-Irons, path derivatives, selected eigenvectors, Ritz vectors, etc., the nth order initial value problem of /y(dot) = f(y) for t greater than 0, y(0) given/ is typically reduced to the mth order (m is much less than n) problem of /z(dot) = g(z) for t greater than 0, z(0) given/ by the transformation y = Pz where P changes from technique to technique. This paper gives an explicit approximate expression for the reduction error e-i in terms of P and the Jacobian of f. It is shown that: (a) reduction techniques are more accurate when the time rate of change of the response y is relatively small; (b) the change in response between two successive stations contributes to the errors at future stations after the change in response is transformed by a filtering matrix H, defined in terms of P; (c) the error committed at a station propagates to future stations by a mixing and scaling matrix G, defined in terms of P, Jacobian and of f, and time increment h. The paper discusses the conditions under which the reduction errors may be minimized and gives guidelines for selecting the reduction basis vector, i.e., the columns of P.

Utku, S.↗

Recent developments in DYNSUB: New models, code optimization and parallelization

DYNSUB is a high-fidelity coupled code system consisting of the reactor simulator DYN3D and the sub-channel code SUBCHANFLOW. It describes nuclear reactor core behavior with pin-by-pin resolution for both steady-state and transient scenarios. In the course of the coupled code system's active development, super-homogenization (SPH) and generalized equivalence theory (GET) discontinuity factors may be computed with and employed in DYNSUB to compensate pin level homogenization errors. Because of the largely increased numerical problem size for pin-by-pin simulations, DYNSUB has bene fitted from HPC techniques to improve its numerical performance. DYNSUB's coupling scheme has been structurally revised. Computational bottlenecks have been identified and parallelized for shared memory systems using OpenMP. Comparing the elapsed time for simulating a PWR core with one-eighth symmetry under hot zero power conditions applying the original and the optimized DYNSUB using 8 cores, overall speed up factors greater than 10 have been observed. The corresponding reduction in execution time enables a routine application of DYNSUB to study pin level safety parameters for engineering sized cases in a scientific environment. (authors)

97 MATHEMATICS AND COMPUTING↗

Towards improved mesh-designing techniques of spark-ignition engines in the framework of spectral element methods

In the current paper we present an advanced meshing technique to perform high-fidelity numerical simulations in spark ignition (SI) engines. The design of the mesh is critical towards generating physically consistent, high fidelity data especially in regions of complex boundaries inside the cylinder, e.g., near the spark plugs. This is primarily due to the mesh deformation caused by the motion of the valve near the plug and also finer mesh sizes in the spark plug region. In the current work, we demonstrate the use of an overlapping grid (overset) methodology to design the mesh in the spark-plug region in a 2D SI engine-like geometry for a high-order simulation, based on the spectral element method (SEM). The data in the overlapping region is exchanged between the spark-plug geometry and the geometry containing rest of the objects like the piston, cylinder head, valve etc., using a high order spectral interpolation technique. The numerical simulations have been further compared against the standard, single (non-overset) grid, meshing technique for the whole 2D domain. The results further illustrate the capability of overlapping grid methodology in handling mesh deformation compared to the standard grid case and also the ability to capture the flow dynamics with a similar level of fidelity as the standard one

overlapping grids↗

Systematic Construction of Time-Dependent Hamiltonians for Microwave-Driven Josephson Circuits

Time-dependent electromagnetic drives are fundamental for controlling complex quantum systems, including superconducting Josephson circuits. In these devices, accurate time-dependent Hamiltonian models are imperative for predicting their dynamics and designing high-fidelity quantum operations. Existing numerical methods, such as black-box quantization (BBQ) and energy-participation ratio (EPR), excel at modeling the static Hamiltonians of Josephson circuits. However, these techniques do not fully capture the behavior of driven circuits stimulated by external microwave drives, nor do they include a generalized approach to account for the inevitable noise and dissipation that enter through microwave ports. Here, we introduce numerical techniques that leverage classical microwave simulations, efficiently executable in finite-element solvers, to obtain the time-dependent Hamiltonian of microwave-driven superconducting circuits with arbitrary geometries under charge, flux, or mixed electromagnetic modulation. Importantly, our techniques do not rely on a lumped-element description of the superconducting circuit, in contrast to previous approaches to tackling this problem. We demonstrate the versatility of our approach by characterizing the driven properties of realistic circuit devices in complex electromagnetic environments, including coherent dynamics due to charge and flux modulation, as well as drive-induced relaxation and dephasing. Our techniques offer a powerful toolbox for optimizing circuit designs and advancing practical applications in superconducting quantum computing.

Lu, Yao [Yale U.; Yale U. (main); Fermilab] (ORCID↗

Investigation of advanced counterrotation blade configuration concepts for high speed turboprop systems. Task 4: Advanced fan section aerodynamic analysis

The purpose of this study is the development of a three-dimensional Euler/Navier-Stokes flow analysis for fan section/engine geometries containing multiple blade rows and multiple spanwise flow splitters. An existing procedure developed by Dr. J. J. Adamczyk and associates and the NASA Lewis Research Center was modified to accept multiple spanwise splitter geometries and simulate engine core conditions. The procedure was also modified to allow coarse parallelization of the solution algorithm. This document is a final report outlining the development and techniques used in the procedure. The numerical solution is based upon a finite volume technique with a four stage Runge-Kutta time marching procedure. Numerical dissipation is used to gain solution stability but is reduced in viscous dominated flow regions. Local time stepping and implicit residual smoothing are used to increase the rate of convergence. Multiple blade row solutions are based upon the average-passage system of equations. The numerical solutions are performed on an H-type grid system, with meshes being generated by the system (TIGG3D) developed earlier under this contract. The grid generation scheme meets the average-passage requirement of maintaining a common axisymmetric mesh for each blade row grid. The analysis was run on several geometry configurations ranging from one to five blade rows and from one to four radial flow splitters. Pure internal flow solutions were obtained as well as solutions with flow about the cowl/nacelle and various engine core flow conditions. The efficiency of the solution procedure was shown to be the same as the original analysis.

Crook, Andrew J.↗

Parameter identification in continuum models

Approximation techniques for use in numerical schemes for estimating spatially varying coefficients in continuum models such as those for Euler-Bernoulli beams are discussed. The techniques are based on quintic spline state approximations and cubic spline parameter approximations. Both theoretical and numerical results are presented.

Banks, H. T.↗

Parameter identification in continuum models

Approximation techniques for use in numerical schemes for estimating spatially varying coefficients in continuum models such as those for Euler-Bernoulli beams are discussed. The techniques are based on quintic spline state approximations and cubic spline parameter approximations. Both theoretical and numerical results are presented. Previously announced in STAR as N83-28934

Banks, H. T.↗

Approximate techniques of structural reanalysis

A study is made of two approximate techniques for structural reanalysis. These include Taylor series expansions for response variables in terms of design variables and the reduced-basis method. In addition, modifications to these techniques are proposed to overcome some of their major drawbacks. The modifications include a rational approach to the selection of the reduced-basis vectors and the use of Taylor series approximation in an iterative process. For the reduced basis a normalized set of vectors is chosen which consists of the original analyzed design and the first-order sensitivity analysis vectors. The use of the Taylor series approximation as a first (initial) estimate in an iterative process, can lead to significant improvements in accuracy, even with one iteration cycle. Therefore, the range of applicability of the reanalysis technique can be extended. Numerical examples are presented which demonstrate the gain in accuracy obtained by using the proposed modification techniques, for a wide range of variations in the design variables.

Noor, A. K.↗

Mesoscale Simulations of Particulate Flows with Parallel Distributed Lagrange Multiplier Technique

Fluid particulate flows are common phenomena in nature and industry. Modeling of such flows at micro and macro levels as well establishing relationships between these approaches are needed to understand properties of the particulate matter. We propose a computational technique based on the direct numerical simulation of the particulate flows. The numerical method is based on the distributed Lagrange multiplier technique following the ideas of Glowinski et al. (1999). Each particle is explicitly resolved on an Eulerian grid as a separate domain, using solid volume fractions. The fluid equations are solved through the entire computational domain, however, Lagrange multiplier constrains are applied inside the particle domain such that the fluid within any volume associated with a solid particle moves as an incompressible rigid body. Mutual forces for the fluid-particle interactions are internal to the system. Particles interact with the fluid via fluid dynamic equations, resulting in implicit fluid-rigid-body coupling relations that produce realistic fluid flow around the particles (i.e., no-slip boundary conditions). The particle-particle interactions are implemented using explicit force-displacement interactions for frictional inelastic particles similar to the DEM method of Cundall et al. (1979) with some modifications using a volume of an overlapping region as an input to the contact forces. The method is flexible enough to handle arbitrary particle shapes and size distributions. A parallel implementation of the method is based on the SAMRAI (Structured Adaptive Mesh Refinement Application Infrastructure) library, which allows handling of large amounts of rigid particles and enables local grid refinement. Accuracy and convergence of the presented method has been tested against known solutions for a falling sphere as well as by examining fluid flows through stationary particle beds (periodic and cubic packing). To evaluate code performance and validate particle contact physics algorithm, we performed simulations of a representative experiment conducted at the University of California at Berkley for pebble flow through a narrow opening.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An improved, robust, axial line singularity method for bodies of revolution

The failures encountered in attempts to increase the range of applicability of the axial line singularity method for representing incompressible, inviscid flow about an inclined and slender body-of-revolution are presently noted to be common to all efforts to solve Fredholm equations of the first kind. It is shown that a previously developed smoothing technique yields a robust method for numerical solution of the governing equations; this technique is easily retrofitted to existing codes, and allows the number of circularities to be increased until the most accurate line singularity solution is obtained.

Hemsch, Michael J.↗