Search NASA⌕ Search

SEARCH · Search NASA

Results for “performance study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Tailor Made Thin Film Composite Membranes: Potentiality Towards Removal of Hydroquinone from Water

The study investigated the use of thin film composite membrane (TFC) as a potential candidate for hydroquinone removal from water. Thin film composite membranes were prepared by polyamide coating on Polysulfone asymmetric membrane. FTIR study was performed to verify the Polysulfone as well as polyamide functionality. TFC membrane was characterized by contact angle, zeta potential, scanning electron microscopy studies. The salt rejection trend was seen from 500 to 1000 mg/L. The membrane is marked by permeability co-efficient B based on solution diffusion studies. The value is 0.98 × 10{sup −6} m/s for NaCl solution at 1.4 MPa. The separation performance was 88.87% for 5 mg/L hydroquinone at 1.4 MPa. The separation was little bit lowered in acid medium because of the nature of the membrane and feed solute chemistry. The ‘pore swelling’ and ‘salting out’ influenced hydroquinone separation in the presence of NaCl. The hydroquinone separation was 80.63% in 1000 mg/L NaCl solution. In acidic pH, NaCl separation was influenced much more compared to hydroquinone. The separation is influenced by field water matrix.

36 MATERIALS SCIENCE↗

Molecular Transducers of Physical Activity Consortium (MoTrPAC): Mapping the Dynamic Responses to Exercise

Exercise provides a robust physiological stimulus that evokes cross-talk between a wide range of tissues via hormonal, cellular and molecular signals that when repeated regularly over time (i.e., training) improves physiological capacity, benefits numerous organ systems and decreases the risk for premature mortality. In spite of its fundamental importance, a gap remains in identifying the detailed molecular signals and responses to exercise and its benefits for health and disease prevention. To further knowledge in this emerging area, the Molecular Transducers of Physical Activity Consortium (MoTrPAC) was established to generate a molecular map of the effects of acute and chronic exercise. MoTrPAC investigators are conducting preclinical and clinical studies to better understand the systemic effects of exercise across multiple tissues. The preclinical studies were performed on more than 700 rats with the analysis of twenty or more organs per rat. The clinical study involves a large cohort of ~2600 individuals with a range of ages and fitness levels (untrained, trained, highly trained) who will be evaluated physiologically and by molecular probing of blood, muscle and adipose tissues before and after acute and chronic endurance or resistance exercise. Multi-omic analyses (genomics, epigenomics, transcriptomics, proteomics and metabolomics/lipidomics) will be performed followed by state-of-the-art bioinformatics to create a molecular map of exercise. This mapping project will provide a public database that is expected to enhance our understanding of the health benefits of physical activity in many organ systems and potentially provide insight into mitigating diseases through activity.

Sanford, James A.↗

Performance Assessment of Suture Type, Water Temperature, and Surgeon Skill in Juvenile Chinook Salmon Surgically Implanted with Acoustic Transmitters

Size reductions of acoustic transmitters implanted in migrating juvenile salmonids have resulted in the use of a shorter incision - one that may warrant only one suture for closure. However, it is not known if a single suture will sufficiently hold the incision closed when fish are decompressed and outward pressure is placed on the surgical site during passage of hydroelectric dams. The objectives of this study were to evaluate five response variables in juvenile Chinook salmon subjected to simulated turbine passage. Fish were implanted with an acoustic transmitter (0.43 g in air) and a passive integrated transponder tag (0.10 g in air); incisions (6 mm) were closed with either one or two sutures. Following exposure, no transmitters were expelled. In addition, suture and incision tearing and mortal injury did not differ between treatment and control fish. Viscera expulsion was higher in treatment (12%) than control (1%) fish. The higher incidence of viscera expulsion through single-suture incisions warrants concern. Consequently, the authors do not recommend using one suture to close 6-mm incisions associated with acoustic transmitter implantation when juvenile salmonids may be exposed to turbine passage.

Deters, Katherine A↗

Comparative study on the overall energy performance between photovoltaic and Low-E insulated glass units

In this report a novel semi-transparent building integrated photovoltaic (BIPV) laminate was developed and introduced in this paper. It was produced by cutting standard mono-crystalline silicon solar cells into small strips and then making electrical connections between each strip before laminating the cells between two layers of glass. The overall energy performance and energy saving potential of the BIPV insulated glass unit (IGU) under real world conditions were identified through a side by side comparative study. Compared to the reference IGU, the BIPV IGU had lower solar heat gain coefficient (SHGC) but much higher U-factor. The average HVAC electricity saving of the BIPV IGU was about 10% relative to the reference IGU. Daylighting measurement and analysis were carried out to evaluate the trade-offs associated with the BIPV IGU between daylight, glare, and lighting energy use. The results indicated that the BIPV IGU is better than the reference IGU in reducing discomfort glare. However, if the most conservative viewpoint near the window is used for the assessment, a lower transmittance BIPV IGU is required to bring the overall discomfort levels below the perceptible level. Lastly, the net energy saving potential associated with the novel BIPV IGU was identified based on the power, thermal and daylighting performance. On average, the BIPV IGU saved 16.8% of the total electricity use of the room. Further studies and improvement on the energy conversion efficiency of solar cells, the optimal transmittance as well as the thermal properties would make this technology more energy-efficient and affordable.

14 SOLAR ENERGY↗

Ab initio study of formation, migration and binding properties of helium-vacancy clusters in aluminum

Ab initio calculations based on density functional theory have been performed to study the dissolution and migration of helium, and the stability of small helium-vacancy clusters HenVm (n, m=0 to 4) in aluminum. The results indicate that the octahedral configuration is more stable than the tetrahedral. Interstitial helium atoms are predicted to have attractive interactions and jump between two octahedral sites via an intermediate tetrahedral site with low migration energy of 0.10 eV. The binding energies of an interstitial He atom and an isolated vacancy to a HenVm cluster are also obtained from the calculated formation energies of the clusters. We find that the divacancy and tri--vacancy clusters are not stable, but He atoms can increase the stability of vacancy clusters. The interactions of He atoms with a vacancy are found to be in good agreement with the experimental results.

36 MATERIALS SCIENCE↗

On the origin of nonlinear elasticity in disparate rocks

Dynamic acousto-elastic (DAE) studies are performed on a set of 6 rock samples (four sandstones, one soapstone, and one granite). From these studies, at 20 strain levels 10 -7 < ϵ < 10 -5 , four measures characterizing the nonlinear elastic response of each sample are found. Additionally, each sample is tested with nonlinear resonant ultrasonic spectroscopy (NRUS) and a fth measure of nonlinear elastic response is found. The ve measures of the nonlinear elastic response of the samples (approximately 3 x 6 x 20 x 5 numbers as each measurement is repeated 3 times) are subjected to careful analysis using model independent statistical methods, principal component analysis and fuzzy clustering. This analysis reveals di erences among the samples and di erences among the nonlinear measures. Four of the nonlinear measures are sensing much the same physical mechanism in the samples. The fth is seeing something di erent. This is the case for all samples. Although the same physical mechanisms (two) are operating in all samples there are distinctive features in the way the physical mechanisms present themselves from sample to sample. This suggests classi cation of the samples into two groups. The numbers in this study and the classi cation of the measures/samples constitute an empirical characterization of rock nonlinear elastic properties that can serve as a valuable testing ground for physically based theories that relate rock nonlinear elastic properties to microscopic elastic features.

36 MATERIALS SCIENCE↗

Electrolyte Effects on the Stability of Ni-Mo Cathodes for the Hydrogen Evolution Reaction

Water electrolysis to form hydrogen as a solar fuel requires highly effective catalysts. In this work, theoretical and experimental studies are performed on the activity and stability of Ni-Mo cathodes for this reaction. Density functional theory studies show various Ni-Mo facets to be active for the hydrogen evolution reaction, Ni segregation to be thermodynamically favorable, and Mo vacancy formation to be favorable even without an applied potential. Electrolyte effects on the long-term stability of Ni-Mo cathodes are determined. Ni-Mo is compared before and after up to 100 h of continuous operation. It is shown that Ni-Mo is unstable in alkaline media, owing to Mo leaching in the form of MoO 4 2- , ultimately leading to a decrease in absolute overpotential. It is found that the electrolyte, the alkali cations, and the pH all influence Mo leaching. Changing the cation in the electrolyte from Li to Na to K influences the surface segregation of Mo and pushes the reaction towards Mo dissolution. Decreasing the pH decreases the OH - concentration and in this manner inhibits Mo leaching. Of the electrolytes studied, in terms of stability, the best to use is LiOH at pH 13. Thus, a mechanism for Mo leaching is presented alongside ways to influence the stability and make the Ni-Mo material more viable for renewable energy storage in chemical bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toosendanin induces caspase-dependent apoptosis through the p38 MAPK pathway in human gastric cancer cells

Highlights: • Toosendanin suppresses viability of various gastric cancer cell lines. • Toosendanin induces G{sub 1}/S cell cycle arrest followed by inhibiting proliferation of AGS and HGC-27 cells. • Toosendanin induces caspase-dependent apoptosis via p38 MAPK signaling pathway in AGS and HGC-27 cells. • Toosendanin can be a promising therapeutic compound for gastric cancer therapy. Although many advances have been made in the treatment of gastric cancer (GC), numerous difficulties, such as the emergence of chemo-drug resistance, continue to lead to disappointing GC prognoses. Thus, novel alternative strategies are urgently needed. The use of natural products could be a viable option to treat GC. Toosendanin (TSN) is a triterpenoid derived from the bark of Melia toosendanin Sieb. et Zucc that has been shown to be highly cytotoxic to multiple cancer cells. As the underlying impact of TSN on GC and its molecular mechanism remain poorly understood, in this study, we performed a series of experiments involving the use of TSN to treat GC cells. In the present study, we showed that TSN suppressed cell viability, inhibited cell proliferation by causing G{sub 1}/S arrest and induced caspase-dependent apoptosis in AGS and HGC-27 cells. The possible mechanism of TSN-induced apoptosis may be associated with the activation of the p38 MAPK pathway. These results demonstrated the potential of TSN as a promising therapeutic compound to treat gastric cancer.

60 APPLIED LIFE SCIENCES↗

Identifying Patients Who Are Unsuitable for Accelerated Partial Breast Irradiation Using Three-dimensional External Beam Conformal Techniques

Purpose: Several recent studies reported that severe late toxicities including soft-tissue fibrosis and fat necrosis are present in patients treated with accelerated partial breast irradiation (APBI) and that these toxicities are associated with the large volume of tissue targeted by high-dose irradiation. The present study was performed to clarify which patients are unsuitable for APBI to avoid late severe toxicities. Methods and Materials: Study subjects comprised 50 consecutive patients with Stage 0-II unilateral breast cancer who underwent breast-conserving surgery, and in whom five or six surgical clips were placed during surgery. All patients were subsequently replanned using three-dimensional conformal radiotherapy (3D-CRT) APBI techniques according to the National Surgical Adjuvant Breast and Bowel Project (NSABP) B-39 and Radiation Therapy Oncology Group (RTOG) 0413 protocol. The beam arrangements included mainly noncoplanar four- or five-field beams using 6-MV photons alone. Results: Dose-volume histogram (DVH) constraints for normal tissues according to the NSABP/RTOG protocol were satisfied in 39 patients (78%). Multivariate analysis revealed that only long craniocaudal clip distance (CCD) was correlated with nonoptimal DVH constraints (p = 0.02), but that pathological T stage, anteroposterior clip distance (APD), site of ipsilateral breast (IB) (right/left), location of the tumor (medial/lateral), and IB reference volume were not. DVH constraints were satisfied in 20% of patients with a long CCD ({>=}5.5 cm) and 92% of those with a short CCD (p < 0.0001). Median IB reference volume receiving {>=}50% of the prescribed dose (IB-V{sub 50}) of all patients was 49.0% (range, 31.4-68.6). Multivariate analysis revealed that only a long CCD was correlated with large IB-V{sub 50} (p < 0.0001), but other factors were not. Conclusion: Patients with long CCDs ({>=}5.5 cm) might be unsuitable for 3D-CRT APBI because of nonoptimal DVH constraints and large IB-V{sub 50}.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Structural, optical and femtosecond third-order nonlinear optical properties of LiNbO{sub 3} thin films

Highlights: • Fs third order NLO properties of LiNbO{sub 3} thin films were investigated. • Al:ZnO was used as a buffer layer to control the growth of LiNbO{sub 3}. • The magnitude of the χ{sup (3)} of all films was ∼10{sup −11} e.s.u. • χ{sup (3)} obtained here is much higher that of single crystal Z-cut LiNbO{sub 3}. - Abstract: LiNbO{sub 3} thin films were deposited by means of Al:ZnO as intermediate layer using pulsed laser deposition and their structural, linear and nonlinear optical (NLO) properties were investigated. The films were found to be polycrystalline, (110) orientation for Al:ZnO/fused silica and (300) orientation for Al:ZnO/quartz substrates. The films demonstrated a transparency of >80% in the visible and near-infrared region. The NLO studies were performed with the Z-scan technique using ∼150 fs, 80 MHz pulses at 800 nm. The studies revealed that the polycrystalline LiNbO{sub 3}films and (300) LiNbO{sub 3}films demonstrated reverse saturable absorption while a transition to saturable absorption was observed in the case of (110) LiNbO{sub 3}. The presence of two-photon absorption is attributed to the indirect transition via intermediate defect levels which is related to the structural asymmetry. The large nonlinearity in refractive index could be a result of the strain induced ferroelectric polarization. The magnitude of the third order optical nonlinearity of all films was ∼10{sup −11} e.s.u. which is orders of magnitude higher than the value obtained for single crystal Z-cut LiNbO{sub 3}.

36 MATERIALS SCIENCE↗

Performance of a hybrid pyroelectric LiNbO{sub 3} and TiO{sub 2} nanotubes X-ray source

Effects of crystal length and temperature on performance and degradation properties of LiNbO{sub 3}/TiO{sub 2} pyroelectric/nanotube X-ray source were studied. Such hybrid LiNbO{sub 3}/TiO{sub 2} X-ray source was fabricated by bonding electrochemically grown TiO{sub 2} nanotubes on −z face of pyroelectric LiNbO{sub 3} crystal. In particular, it was found that maximum accelerated electron energy increased with height for both pure and hybrid LiNbO{sub 3}/TiO{sub 2} system for both heating and cooling cycles. For example, for 2 cm long hybrid structure the resulting maximum energy during heating cycle was 97 keV as compared to 74 keV for 1 cm long structure. The maximum energy for the pure sample without nanotubes increased from 45 keV to 66 keV. Increased endpoint energy of nanotube based X-ray source is attributed to electric field amplification on nanotube tips increasing the efficiency of residual gas ionization, leading to improved charge carrier transmission efficiency. The degradation properties were studied by performing multiple thermal cycles and results revealed that cluster nanotips erode over time. After 20 cycles they become flat as was evidenced from scanning electron microscope analysis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mechanical properties of stanene under uniaxial and biaxial loading: A molecular dynamics study

Stanene, a graphene like two dimensional honeycomb structure of tin has attractive features in electronics application. In this study, we performed molecular dynamics simulations using modified embedded atom method potential to investigate mechanical properties of stanene. We studied the effect of temperature and strain rate on mechanical properties of α-stanene for both uniaxial and biaxial loading conditions. Our study suggests that with the increasing temperature, both the fracture strength and strain of the stanene decrease. Uniaxial loading in zigzag direction shows higher fracture strength and strain compared to the armchair direction, while no noticeable variation in the mechanical properties is observed for biaxial loading. We also found at a higher loading rate, material exhibits higher fracture strength and strain. These results will aid further investigation of stanene as a potential nano-electronics substitute.

36 MATERIALS SCIENCE↗

Bulk Power System Dynamics with Varying Levels of Synchronous Generators and Grid-Forming Power Inverters

Inverters using phase-locked loops for control depend on voltages generated by synchronous machines to operate. This might be problematic if much of the conventional generation fleet is displaced by inverters. To solve this problem, grid-forming control for inverters has been proposed as being capable of autonomously regulating grid voltages and frequency. Presently, the performance of bulk power systems with massive penetration of grid-forming inverters has not been thoroughly studied as to elucidate benefits. Hence, this paper presents inverter models with two grid-forming strategies: virtual oscillator control and droop control. The two models are specifically developed to be used in positive-sequence simulation packages and have been implemented in PSLF. The implementations are used to study the performance of bulk power grids incorporating inverters with gridforming capability. Specifically, simulations are conducted on a modified IEEE 39-bus test system and the microWECC test system with varying levels of synchronous and inverter-based generation. The dynamic performance of the tested systems with gridforming inverters during contingency events is better than cases with only synchronous generation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Validation Study of the Compressible Rayleigh–Taylor Instability Comparing the Ares and Miranda Codes

In this paper, the compressible Rayleigh–Taylor (RT) instability is studied by performing a suite of large eddy simulations (LES) using the Miranda and Ares codes. A grid convergence study is carried out for each of these computational methods, and the convergence properties of integral mixing diagnostics and late-time spectra are established. A comparison between the methods is made using the data from the highest resolution simulations in order to validate the Ares hydro scheme. We find that the integral mixing measures, which capture the global properties of the RT instability, show good agreement between the two codes at this resolution. The late-time turbulent kinetic energy and mass fraction spectra roughly follow a Kolmogorov spectrum, and drop off as k approaches the Nyquist wave number of each simulation. The spectra from the highest resolution Miranda simulation follow a Kolmogorov spectrum for longer than the corresponding spectra from the Ares simulation, and have a more abrupt drop off at high wave numbers. The growth rate is determined to be between around 0.03 and 0.05 at late times; however, it has not fully converged by the end of the simulation. Finally, we study the transition from direct numerical simulation (DNS) to LES. The highest resolution simulations become LES at around t/τ ≃ 1.5. Finally, to have a fully resolved DNS through the end of our simulations, the grid spacing must be 3.6 (3.1) times finer than our highest resolution mesh when using Miranda (Ares).

42 ENGINEERING↗

Running Primal-Dual Gradient Method for Time-Varying Nonconvex Problems

This paper focuses on a time-varying constrained nonconvex optimization problem, and considers the synthesis and analysis of online regularized primal-dual gradient methods to track a Karush-Kuhn-Tucker (KKT) trajectory. The proposed regularized primal-dual gradient method is implemented in a running fashion, in the sense that the underlying optimization problem changes during the execution of the algorithms. In order to study its performance, we first derive its continuous-time limit as a system of differential inclusions. We then study sufficient conditions for tracking a KKT trajectory, and also derive asymptotic bounds for the tracking error (as a function of the time-variability of a KKT trajectory). Further, we provide a set of sufficient conditions for the KKT trajectories not to bifurcate or merge, and also investigate the optimal choice of the parameters of the algorithm. Illustrative numerical results for a time-varying nonconvex problem are provided.

differential inclusion↗

Analysis of PV Advanced Inverter Functions and Setpoints under Time Series Simulation.

Utilities are increasingly concerned about the potential negative impacts distributed PV may have on the operational integrity of their distribution feeders. Some have proposed novel methods for controlling a PV system's grid - tie inverter to mitigate poten tial PV - induced problems. This report investigates the effectiveness of several of these PV advanced inverter controls on improving distribution feeder operational metrics. The controls are simulated on a large PV system interconnected at several locations within two realistic distribution feeder models. Due to the time - domain nature of the advanced inverter controls, quasi - static time series simulations are performed under one week of representative variable irradiance and load data for each feeder. A para metric study is performed on each control type to determine how well certain measurable network metrics improve as a function of the control parameters. This methodology is used to determine appropriate advanced inverter settings for each location on the f eeder and overall for any interconnection location on the feeder.

14 SOLAR ENERGY↗

Bulk Power System Dynamics with Varying Levels of Synchronous Generators and Grid-Forming Power Inverters: Preprint

Inverters using phase-locked loops for control depend on voltages generated by synchronous machines to operate. This might be problematic if much of the conventional generation fleet is displaced by inverters. To solve this problem, grid-forming control for inverters has been proposed as being capable of autonomously regulating grid voltages and frequency. Presently, the performance of bulk power systems with massive penetrations of grid-forming inverters has not been thoroughly studied to elucidate benefits. Hence, this paper presents inverter models with two grid-forming strategies: virtual oscillator control and droop control. The two models are specifically developed to be used in positive-sequence simulation packages and have been implemented in PSLF. The implementations are used to study the performance of bulk power grids incorporating inverters with grid-forming capability. Specifically, simulations are conducted on a modified IEEE 39-bus test system and the micro-WECC test system with varying levels of synchronous and inverter-based generation. The dynamic performance of the tested systems with grid-forming inverters during contingency events is better than cases with only synchronous generation.

24 POWER TRANSMISSION AND DISTRIBUTION↗