Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantitative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Profiling of bioactive lipids in different dendritic cell subsets using an improved multiplex quantitative LC-MS/MS method

Highlights: • We improved a LC-MS/MS method to measure many mediators simultaneously. • Conventional DCs produce inflammatory lipids (leukotrienes) preferentially. • RA-DCs produce PGI{sub 2}, PGE{sub 2}, and TXA{sub 2} preferentially. Lipids are an energy source and key components of the cell membrane; however, they are also bioactive mediators of physiological and pathophysiological phenomena. Quantification of bioactive lipids is not easy because they have diverse chemical properties and are present in trace amounts. Here, we improved a multiplex method of quantifying bioactive lipids, thereby enabling measurement of 90 compounds simultaneously. We then used this system to quantify bioactive lipids produced by two subsets of dendritic cells (DCs): all-trans retinoic acid-treated DCs (RA-DCs) (a type of tolerogenic DC (tDC)) and conventional DCs (cDCs). We found that cDCs produced inflammatory lipid mediators such as leukotrienes, whereas RA-DCs produced anti-inflammatory lipid mediators such as prostaglandin I{sub 2}. Consistent with this, cDCs expressed larger amounts of mRNA encoding 5-lipoxygenase and LTA{sub 4} hydrolase (both responsible for leukotriene biosynthesis) and RA-DCs produced larger amounts of mRNA encoding prostaglandin I{sub 2} synthase. Taken together, the results suggest that the method is useful for clarifying the roles of bioactive lipids during immune responses.

60 APPLIED LIFE SCIENCES↗

Quantitative proteome analysis identifies MAP2K6 as potential regulator of LIFR-induced radioresistance in nasopharyngeal carcinoma cells

Using Tandem Mass Tags (TMT) labeling and LC-MS/MS analysis of peptides from two cell lines (CNE2 and its radioresistant subclone CNE2-IR), we identified 754 proteins differentially expressed in CNE2-IR compared to CNE2. MAP2K6 was identified as a candidate radioresistance-related protein kinase. In vitro functional analysis revealed that over-expression of MAP2K6 significantly enhanced cell survival and colony formation following irradiation in NPC cells. Further, knockdown of MAP2K6 in radioresistant NPC cells led to decreased colony formation and increased apoptotic cells following irradiation. However, the effect of MAP2K6 in regulating the radioresistance in NPC cells did not seem to depend on p38/MAPK activity. Importantly, MAP2K6 might be required for leukemia inhibitory factor receptor (LIFR)-regulated radioresistance, as the expression levels of MAP2K6 affected LIFR/p70S6K signaling activation in NPC cells. Further, MAP2K6 kinase activity is required to activate LIFR/p70S6K signaling and to confer pro-survival effect on NPC cells. In conclusion, MAP2K6 might be an important regulator of LIFR-induced radioresistance in NPC.

60 APPLIED LIFE SCIENCES↗

Quantitative assessment of methane bioconversion based on kinetics and bioenergetics

The biological conversion of methane under ambient conditions can be performed by methanotrophs that utilize methane as both a sole source of energy and a carbon source. However, compared to the established microbial chassis used for general fermentation with sugar as a feedstock, the productivity of methanotrophs is low. The fundamental knowledge of their metabolic or cellular bottlenecks is limited. In this review, the industrial-scale potential of methane bioconversion was evaluated. In particular, the enzyme kinetics associated with the oxidation and assimilation of methane were investigated to evaluate the potential of methane fermentation. Furthermore, the kinetics of enzymes involved in methane metabolism were compared with those used in the metabolic processes of traditional fermentation (glycolysis). Through this analysis, the current limitations of methane metabolism were identified. Methods for increasing the efficiency of methane bioconversion and directions for the industrial application of methane-based fermentation were discussed.

09 BIOMASS FUELS↗

Crystal structure of low magnesium-content alite: Application to Rietveld quantitative phase analysis

Five members of tricalcium silicate solid solution, Ca{sub 3-x-y}Mg{sub x}Al{sub y}(Si{sub 1-y}Al{sub y})O{sub 5}, have been prepared. T{sub 1,} T{sub 3} and M{sub 3} forms have been identified by X-ray powder diffraction, but pure M{sub 1} form was not stabilized. The crystal structure of a sample nominally Ca{sub 2.96}Mg{sub 0.03}Al{sub 0.01}(Si{sub 0.99}Al{sub 0.01})O{sub 5} has been studied by a joint Rietveld refinement using strictly monochromatic laboratory X-ray and neutron powder diffraction data, with soft constraints of interatomic distances. The crystal structure of this alite is a T{sub 3} form with a triclinic cell, space group P 11-, of dimensions a = 11.6389(2) A, b = 14.1716(3) A, c = 13.6434(3) A, {alpha} = 104.982(2) deg., {beta} = 94.622(1) deg., {gamma} = 90.107(2) deg. and V/Z = 120.346(6) A{sup 3}. Laboratory and commercial clinkers were studied by synchrotron X-ray powder diffraction and the Rietveld method. The reported T{sub 3} structure for alite fits properly a variety of laboratory Portland clinkers with low magnesium contents. The alite refined volume(s) (V/Z) is useful to predict the magnesium oxide content of a clinker and the alite-type. Thus, a refined V/Z value between 121.0 and 120.3 A{sup 3} should contain up to {approx} 1.0 wt.% of MgO, being T{sub 3} type. If refined C{sub 3}S V/Z is smaller than {approx} 119.8 A{sup 3} the clinker may contain more than {approx} 2.1 wt.% of MgO with alite as M{sub 3}. For intermediate magnesium (and sulfur) contents, alites phase coexistence may be detected by using strictly monochromatic laboratory or synchrotron X-ray powder diffraction. However, the application of these results to commercial materials has to be taken cautiously due to the influence of other foreign ions in volume and alite-type.

36 MATERIALS SCIENCE↗

A new approach in quantitative in-situ XRD of cement pastes: Correlation of heat flow curves with early hydration reactions

XRD measurements of the hydration of synthetical cement (SyCem) were used to calculate the resulting heat flow from changes in the phase content. Calculations were performed by application of thermodynamic data. The comparison with data recorded from heat flow calorimetry was in good agreement with the calculated heat flow. The initial maximum of heat flow mainly is caused by the aluminate reaction. During the entire main period the silicate reaction dominates hydration with a high and long first maximum of heat flow. The second but less intense heat flow maximum - only visible as a shoulder in most of the technical cements - can be attributed to an acceleration of the aluminate reaction with the enhanced dissolution of C{sub 3}A and the final formation of ettringite. Moreover, the investigation showed that the dissolution process of C{sub 3}A is directly controlled by the availability of the calcium sulfate phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatially resolved quantitative in-situ phase analysis of a self-leveling compound

The development of the crystalline microstructure of a hydrating self-leveling compound (SLC) was analyzed using a two-dimensional XRD (GADDS). The application of non-destructive micro-diffraction with the GADDS, combined with a custom-made sample holder, made it possible to carry out position-sensitive in-situ measurements of a Calcium-Aluminate-Cement-(CAC)-dominated SLC. Different substrates were used in the measurement procedures so as to acquire data regarding the influence of the properties of the ground surface on the process of hydration. The results show that the crystalline microstructure is strongly affected by the availability of free water. The strongly vertically-fluctuating water-content of the hydrating mortar, which is mainly influenced by outside conditions, has a very significant effect upon the resulting ettringite content. This fact is also reflected in the resulting microstructure of the cured SLC.

36 MATERIALS SCIENCE↗

Portable quantitative confocal Raman spectroscopy: Non-destructive approach of the carbonation chemistry and kinetics

Highlights: • Raman spectroscopy was used to monitor carbonation of portlandite • The approach was non-destructive, continuous, and performed within the material • Carbonation was identified coupling Raman spectroscopy and chemometrics • Kinetics was calculated for one portlandite thickness at different CO{sub 2}-percentages Carbonation is one major alteration process of cementitious materials. It can be monitored through several methods, all destructive. In this study, some preliminary investigations were conducted to monitor the carbonation process of pure portlandite with an in situ and non-destructive spectroscopic method. This complementary approach was motivated by a literature review indicating the benefits of Raman spectroscopy, but requiring innovative approaches for data acquisition and analysis. The material was selected to validate this spectroscopic monitoring, coupled with chemometrics tools to allowing an early detection of the carbonation reaction through a structure identified in the spectra data population. The carbonation occurred abruptly, and spectra analysis indicated the occurrence of phases synonymous of microstructural evolutions. Varying the atmospheric percentage of CO{sub 2} (0.04% - 4%) conducted to an appreciation of the kinetics of the carbonation front through the same thickness of portlandite.

36 MATERIALS SCIENCE↗