Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

LED lamp incorporating remote phosphor with heat dissipation features

An LED lamp or bulb is disclosed that comprises a light source, a heat sink structure and a remote planar phosphor carrier having at least one conversion material. The phosphor carrier can be remote to the light sources and mounted to the heat sink so that heat from the phosphor carrier spreads into the heat sink. The phosphor carrier can comprise a thermally conductive transparent material and a phosphor layer, with an LED based light source mounted to the heat sink such that light from the light source passes through the phosphor carrier. At least some of the LED light is converted by the phosphor carrier, with some lamp embodiments emitting a white light combination of LED and phosphor light. The phosphor arranged according to the present invention can operate at lower temperature to thereby operate at greater phosphor conversion efficiency and with reduced heat related damage to the phosphor.

36 MATERIALS SCIENCE↗

Raylike Structures in the Solar Corona

Recent white light images from the large-angle spectroscopic coronagraph (LASCO) on the Solar and Heliospheric Observatory (SoHO) have revealed almost radially extending coronal structures out to serveral solar raddi which fill the corona at all latitudes, except when they are overshadowed by streamers.

corona Sun raylike structures↗

Growth of light-emitting SiGe heterostructures on strained silicon-on-insulator substrates with a thin oxide layer

The possibility of using substrates based on “strained silicon on insulator” structures with a thin (25 nm) buried oxide layer for the growth of light-emitting SiGe structures is studied. It is shown that, in contrast to “strained silicon on insulator” substrates with a thick (hundreds of nanometers) oxide layer, the temperature stability of substrates with a thin oxide is much lower. Methods for the chemical and thermal cleaning of the surface of such substrates, which make it possible to both retain the elastic stresses in the thin Si layer on the oxide and provide cleaning of the surface from contaminating impurities, are perfecte. It is demonstrated that it is possible to use the method of molecular-beam epitaxy to grow light-emitting SiGe structures of high crystalline quality on such substrates.

36 MATERIALS SCIENCE↗

A Novel Manufacturing Process of Lightweight Automotive Seats: Integration of Additive Manufacturing and Reinforced Polymer Composite

Lightweight automotive seats offer multiple benefits to original equipment manufacturers in terms of cost savings from various aspects, including less material usage, more integrated processes, and compliance with Corporate Average Fuel Economy Standards. Original equipment manufacturers have been focusing on innovative ways to produce light weight automotive seats. The commercially available automotive seats are currently made of multiple metal components combined through welding and fasteners. The use of additive manufacturing and composite structures is particularly useful for light weighting the automotive components. Additive manufacturing (AM) offers multiple advantages over traditional manufacturing processes such as freedom of design thereby enabling complex structural geometries, mass customization and waste minimization, and control over the fiber alignment through deposition in a predetermined pattern. Combining metal inserts with polymer composites through a novel manufacturing process allows design of lightweight and high-performance materials for automotive components.

99 GENERAL AND MISCELLANEOUS↗

A Novel Manufacturing Process of Lightweight Automotive Seats (Integration of Additive Manufacturing and Reinforced Polymer Composite)

Lightweight automotive seats offer multiple benefits to original equipment manufacturers in terms of cost savings from various aspects, including less material usage, more integrated processes, and compliance with Corporate Average Fuel Economy Standards. Original equipment manufacturers have been focusing on innovative ways to produce light weight automotive seats. The commercially available automotive seats are currently made of multiple metal components combined through welding and fasteners. The use of additive manufacturing and composite structures is particularly useful for light weighting the automotive components. Additive manufacturing (AM) offers multiple advantages over traditional manufacturing processes such as freedom of design thereby enabling complex structural geometries, mass customization and waste minimization, and control over the fiber alignment through deposition in a predetermined pattern. Combining metal inserts with polymer composites through a novel manufacturing process allows design of lightweight and high-performance materials for automotive components. However, fabricating these metal polymer composite structures through traditional manufacturing processes limits their mechanical properties due to limited design freedom, lack of control over fiber orientation in composite parts, and poor interfacial bonding between the constituent materials. It is essential to develop a novel manufacturing process to enable high throughput production of lightweight automotive seats using metal and polymer composites. As such it is important to design the automotive seat suitable for manufacturing via this process and perform mechanical characterization on various subcomponents of the seat to ensure that the design and performance requirements provided by the auto manufacturer are met. The aim of this project is to develop a novel manufacturing technique to produce lightweight automotive seat by combining AM with conventional manufacturing processes. The car seat back panel will be designed via topology optimization and numerical simulations to minimize the overall weight while ensuring it meets all the performance requirements. The optimization of the seat back structure will be based on computational stress analysis to maximize the stiffness and minimize the weight. Materials currently used by Ford Motor Company will be adopted for a few subcomponents while the in-house composite materials will be used for the rest of the seat back. The composite and metallic materials will be tested to determine their mechanical properties as these are necessary for simulations. A novel manufacturing process will be developed to integrate AM metal inserts with discontinuous reinforced composite through large scale additive manufacturing and compression overmolding processes. The developed manufacturing technique will be used to fabricated various subcomponents suitable for the seat back design and mechanically tested to determine their properties. The manufacturing of the lightweight seat back design through this process involves integrated AM metal inserts with the composite structure for recliner connection. The manufacturing of the entire seat back which is lightweight through the novel manufacturing process will be discussed. The performance of the designed seat back will be investigated through numerical simulations and shown to meet all the requirements provided by the auto manufacturer. The final goal of developing a novel manufacturing process for lightweight automotive seats is met through design optimization of seat back, manufacturing of subcomponents, mechanical characterization, and validation through numerical simulations. The routes to achieve the final goal of the project and the depth in which they were investigated changed throughout the project due to personnel changes and the COVID-19 pandemic. The project resulted in the development of a novel manufacturing process to integrate metal inserts with tailored polymer composite preforms through overmolding. Leveraging this proven manufacturing process, a lightweight seat back was designed through topology optimization and numerical simulations. The designed seat back uses AM metal inserts and compression overmolding of tailored polymer composite preforms obtained via large scale additive manufacturing. The metal polymer composite structures fabricated through this process exhibited enhancement in stiffness and improved ductility upon testing. Overall, the project provided an alternative design and manufacturing technique for automotive seat back that enables weight saving while meeting the safety and performance requirements.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A study of plasmonic enhanced transmission effects in nano-optics

This project was a numerical study of the behavior of surface plasmons in nano-systems, focusing on the interaction between plasmons, light, and nano-scale structures such as nano-scale metallic wires and quantum wires/dots. The primary results of the project included: a) the demonstration of the use of surface plasmons to modify the spatial coherence of a light wave, b) the demonstration of a feasible plasmonic superresolved readout system, and c) the demonstration of a Plasmonic Zeno effect, in which the attenuation of a light wave in metal is suppressed by breaking up the metal into a collection of structured layers. The integration of quantum wire/dot effects with the plasmonic simulations proved to be harder than expected, in large part due to the lack of accurate and simple quantum dot models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New high-throughput endstation to accelerate the experimental optimization pipeline for synchrotron X-ray footprinting

Synchrotron X-ray footprinting (XF) is a growing structural biology technique that leverages radiation-induced chemical modifications via X-ray radiolysis of water to produce hydroxyl radicals that probe changes in macromolecular structure and dynamics in solution states of interest. The X-ray Footprinting of Biological Materials (XFP) beamline at the National Synchrotron Light Source II provides the structural biology community with access to instrumentation and expert support in the XF method, and is also a platform for development of new technological capabilities in this field. Hee, the design and implementation of a new high-throughput endstation device based around use of a 96-well PCR plate form factor and supporting diagnostic instrumentation for synchrotron XF is described. This development enables a pipeline for rapid comprehensive screening of the influence of sample chemistry on hydroxyl radical dose using a convenient fluorescent assay, illustrated here with a study of 26 organic compounds. The new high-throughput endstation device and sample evaluation pipeline now available at the XFP beamline provide the worldwide structural biology community with a robust resource for carrying out well optimized synchrotron XF studies of challenging biological systems with complex sample compositions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

BioMoSS: Biocidal MoS2 for Disinfection of Spacecraft Potable Water Systems

It has been reported in the literature that few-layered, vertically-aligned molybdenum disulfide (FLV-MoS2) can produce biocidal agents for water disinfection with great effectiveness under visible light excitation. The nano-structure, with limited layers and small domain size increases the band gap of the MoS2 in the visible region such that visible light can be used to drive the production of reactive oxygen species (ROS) for biocidal control. This paper will present the BioMoSS (biocidal MoS2) for space applications concept and present initial results of the investigation into turning the FLV-MoS2 into a viable biocidal system.

Delzeit, Lance↗

Characterization and thermal stability of cobalt-modified 1-D nanostructured trititanates

One-dimensional (1-D) nanostructured sodium trititanates were obtained via alkali hydrothermal method and modified with cobalt via ion exchange at different Co concentrations. The resulting cobalt-modified trititanate nanostructures (Co-TTNS) were characterized by TGA, XRD, TEM/SAED, DRS-UV-Vis and N{sub 2} adsorption techniques. Their general chemical formula was estimated as Na{sub x}Co{sub y/2}H{sub 2-x-y}Ti{sub 3}O{sub 7}.nH{sub 2}O and they maintained the same nanostructured and multilayered nature of the sodium precursor, with the growth direction of nanowires and nanotubes along [010]. As a consequence of the Co{sup 2+} incorporation replacing sodium between trititanate layers, two new diffraction lines became prominent and the interlayer distance was reduced with respect to that of the precursor sodium trititanate. Surface area was slightly increased with cobalt intake whereas pore size distribution was hardly affected. Besides, Co{sup 2+} incorporation in trititanate crystal structure also resulted in enhanced visible light photon absorption as indicated by a strong band-gap narrowing. Morphological and structural thermal transformations of Co-TTNS started nearly 400 deg. C in air and the final products after calcination at 800 deg. C were found to be composed of TiO{sub 2}-rutile, CoTiO{sub 3} and a bronze-like phase with general formula Na{sub 2x}Ti{sub 1-x}Co{sub x}O{sub 2}. - Graphical abstract: Co{sup 2+} incorporation in 1D-trititanate crystal nanostructure (Co-TTNS) causes reduction in interlayer distance by comparison with its sodium precursor (Na-TTNS) and leads to enhanced visible light photon absorption efficiency due to a strong band-gap narrowing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Instanton Effects in Euclidean vacuum, Real Time Production, and in the Light-front Wave Functions

Nontrivial topological structures of non-Abelian gauge fields were discovered in the 1970s. Instanton solutions, describing vacuum tunneling through topological barriers, have fermionic zero modes which are at the origin of ‘t Hooft effective Lagrangian. In the 1980s, instanton ensembles have been used to explain chiral symmetry breaking. In the 1990s, a large set of numerical simulations were performed deriving Euclidean correlation functions. The special role of scalar diquarks in nucleons and color superconductivity in dense quark matter has been elucidated. In these lectures, we discuss further developments of physics related to gauge topology. We show that the instanton–anti-instanton “streamline” configurations describe “sphaleron transitions” in high-energy collisions, which result in production of hadronic clusters with nontrivial topological/chiral charges. (They are not yet observed, but discussions of dedicated experiments at the LHC and RHIC are ongoing.) Another new direction is instanton effects in hadronic spectroscopy, both in the rest frame and on the light front. We will discuss their role in central and spin-dependent potentials, form factors and antiquark nuclear “sea”. Finally, we summarize the advances in the semiclassical theory of deconfinement, and chiral phase transitions at finite temperature, in QCD, and in some of its “deformed” versions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Linker-Based Bandgap Tuning in Conductive MOF Solid Solutions

Herein, the synthesis of Cu 3 (HAB) x (TATHB) 2-x (HAB: hexaaminobenzene, TATHB: triaminotrihydroxybenzene) is reported. Synthetic improvement of Cu 3 (TATHB) 2 leads to a more crystalline framework with higher electrical conductivity value than previously reported. The improved crystallinity and analogous structure between TATHB and HAB enable the synthesis of Cu 3 (HAB) x (TATHB) 2-x with ligand compositions precisely controlled by precursor ratios. The electrical conductivity is tuned from 4.2 × 10 -8 to 2.9 × 10 -5 S cm -1 by simply increasing the nitrogen content in the crystal lattice. Furthermore, computational calculation supports that the solid solution facilitates the band structure tuning. In conclusion, it is envisioned that the findings not only shed light on the ligand-dependent structure–property relationship but create new prospects in synthesizing multicomponent electrically conductive metal-organic frameworks (MOFs) for tailoring optoelectronic device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation Analysis and Performance Study of CoCrMo Porous Structure Manufactured by Selective Laser Melting

To fabricate porous implants with improved biocompatibility and mechanical properties that are matched to their application using selective laser melting (SLM), flow within the mold and compressive properties and performance of the porous structures must be comprehensively studied. Parametric modeling was used to build 3D models of octahedron and hexahedron structures. Finite element analysis was used to evaluate the mold flow and compressive properties of the parametric porous structures. A DiMetal-100 SLM molding apparatus was used to manufacture the porous structures and the results evaluated by light microscopy. The results showed that parametric modeling can produce robust models. Square structures caused higher blood cell adhesion than cylindrical structures. “Vortex” flow in square structures resulted in chaotic distribution of blood elements, whereas they were mostly distributed around the connecting parts in the cylindrical structures. No significant difference in elastic moduli or compressive strength was observed in square and cylindrical porous structures of identical characteristics. Hexahedron, square and cylindrical porous structures had the same stress–strain properties. For octahedron porous structures, cylindrical structures had higher stress–strain properties. Using these modeling and molding results, an important basis for designing and the direct manufacture of fixed biological implants is provided.

36 MATERIALS SCIENCE↗

Improvement of electroluminescence performance by integration of ZnO nanowires and single-crystalline films on ZnO/GaN heterojunction

Heterojunction light-emitting diodes based on n-ZnO nanowires/ZnO single-crystalline films/p-GaN structure have been demonstrated for an improved electroluminescence performance. A highly efficient ultraviolet emission was observed under forward bias. Compared with conventional n-ZnO/p-GaN structure, high internal quantum efficiency and light extraction efficiency were simultaneously considered in the proposed diode. In addition, the diode can work continuously for ∼10 h with only a slight degradation in harsh environments, indicating its good reliability and application prospect in the future. This route opens possibilities for the development of advanced nanoscale devices in which the advantages of ZnO single-crystalline films and nanostructures can be integrated together.

36 MATERIALS SCIENCE↗

A multi-satellite study of the nature of wavelike structures in the magnetospheric plasma

An intercomparison is made of the wavelike structures in the data from the light ion mass spectrometer and the fluxgate magnetometer on OGO 5. The wavelike structures appear simultaneously in the data from both experiments. The waves contain both transverse and compressional modes and exhibit periods of 100 to 200 seconds. The waves are usually observed outside the plasmapause and are located primarily on the dayside of the magnetosphere. One possible cause of the apparent density fluctuation is a velocity modulation of the thermal plasma which causes the particles to drift into and out of the ion spectrometer.

Shelley, E. G.↗

Apollo light flash investigations

The visual phenomenon of light flashes resulting from high energy, heavy cosmic rays penetrating the command module structure and crewmembers' eyes is investigated. Light flash events observed during dedicated sessions on Apollo 15, 16, 17 are described along with a Monte Carlo simulation of the exposure of an astronaut to cosmic radiation during a mission. Results of the Apollo Light Flash Moving Emulsion Detector experiment developed for Apollo 16 and 17 to obtain a direct record of incident cosmic ray particles are correlated with crewmembers' reports of light flashes.

W. Zachary Osborne↗

2012 Photosynthesis Gordon Research Conference and Seminar, JUL 7-13, 2012

The Gordon Research Conference on PHOTOSYNTHESIS was held at Davidson College, Davidson, North Carolina, July 8-13, 2012. The Conference was well-attended with 150 participants (attendees list attached). The attendees represented the spectrum of endeavor in this field coming from academia, industry, and government laboratories, both U.S. and foreign scientists, senior researchers, young investigators, and students. Of the 150 attendees, 65 voluntarily responded to a general inquiry regarding ethnicity which appears on our registration forms. Of the 65 respondents, 20% were Minorities$-$ 5% Hispanic, 15% Asian and 0% African American. Approximately 28% of the participants at the 2012 meeting were women. The Gordon Research Seminar on PHOTOSYNTHESIS held at Davidson College, Davidson, North Carolina, July 7-8, 2012.. The Conference was well-attended with 51 participants (attendees list attached). The attendees represented the spectrum of endeavor in this field coming from academia, industry, and government laboratories, both U.S. and foreign scientists, senior researchers, young investigators, and students. Of the 51 attendees, 22 voluntarily responded to a general inquiry regarding ethnicity which appears on our registration forms. Of the 22 respondents, 14% were Minorities $-$0% Hispanic, 14% Asian and 0% African American. Approximately 35% of the participants at the 2012 meeting were women. Focal points for talks and discussions will include: Artificial photosynthesis and solar energy conversion strategies; Engineering organisms for biofuels and hydrogen production; Electron transport, proton transport, and energy coupling; Photoprotection mechanisms; Photosynthetic reaction center structure and function, including rewiring reaction centers for artificial photosynthesis; Energy capture and light harvesting solutions, including quantum coherence; Structure of the oxygen evolving complex and the mechanism of oxygen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology and Structure of ZnO Films Synthesized by Off-Axis Sputtering Deposition

ZnO is a wide-band-gap oxide material that has many applications. A new potential application of ZnO material is for light emitting devices since its structure and electrical properties are similar to that of the GaN material (a blue laser candidate). It also is a good substrate for fabricating GaN-based devices. Off-axis sputtering technique has revealed great potential in synthesizing excellent oxide materials because the negative ion bombardment is greatly reduced when adatoms condense on substrates. The surface of films grown by off-axis sputtering will be much smoother than that produced in a regular sputtering configuration. A growth mechanism is studied by investigating the morphology and structure of ZnO films under different growth conditions and orientations. ZnO films are deposited on (0001) sapphire and quartz substrates by off- axis sputtering deposition at various oxygen/argon mixture ratios and pressures and at different temperatures. All films reveal highly textured structures on quartz substrates and epitaxial growth on sapphire substrates. Two off-axis configurations, vertical and horizontal orientations are conducted to study the process of film growth, surface morphology, and film structure. X-ray diffraction, scanning probe microscopy, and electrical measurements are used to characterize these films. Detailed results will be discussed in the presentation. Keywords: ZnO, Photonic material, Off-axis sputtering, Growth mechanism

Zhu, Shen↗

Mid infrared optical properties of Ge/Si quantum dots with different doping level

Optical characterization of the Ge/Si quantum dots using equilibrium and photo-induced absorption spectroscopy in the mid-infrared spectral range was performed in this work. Equilibrium absorption spectra were measured in structures with various doping levels for different light polarizations. Photo-induced absorption spectra measured in undoped structure under interband optical excitation of non-equilibrium charge carriers demonstrate the same features as doped sample in equilibrium conditions. Hole energy spectrum was determined from the analysis of experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗