Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accelerators, Computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

SU-G-TeP2-04: Comprehensive Machine Isocenter Evaluation with Separation of Gantry, Collimator, and Table Variables

Purpose: To develop and demonstrate application of a method that characterizes deviation of linac x-ray beams from the centroid of the volumetric radiation isocenter as a function of gantry, collimator, and table variables. Methods: A set of Winston-Lutz ball-bearing images was used to determine the gantry radiation isocenter as the midrange of deviation values resulting from gantry and collimator rotation. Also determined were displacement of table axis from gantry isocenter and recommended table axis adjustment. The method, previously reported, has been extended to include the effect of collimator walkout by obtaining measurements with 0 and 180 degree collimator rotation for each gantry angle. Twelve images were used to characterize the volumetric isocenter for the full range of available gantry, collimator, and table rotations. Results: Three Varian True Beam, two Elekta Infinity and four Versa HD linacs at five institutions were tested using identical methodology. Varian linacs exhibited substantially less deviation due to head sag than Elekta linacs (0.4 mm vs. 1.2 mm on average). One linac from each manufacturer had additional isocenter deviation of 0.3 to 0.4 mm due to jaw instability with gantry and collimator rotation. For all linacs, the achievable isocenter tolerance was dependent on adjustment of collimator position offset, transverse position steering, and alignment of the table axis with gantry isocenter, facilitated by these test results. The pattern and magnitude of table axis wobble vs. table angle was reproducible and unique to each machine. Conclusion: This new method provides a comprehensive set of isocenter deviation values including all variables. It effectively facilitates minimization of deviation between beam center and target (ball-bearing) position. This method was used to quantify the effect of jaw instability on isocenter deviation and to identify the offending jaw. The test is suitable for incorporation into a routine machine QA program. Software development was performed by Radiological Imaging Technology, Inc.

60 APPLIED LIFE SCIENCES↗

WE-AB-207B-01: Dose Tolerance for SBRT/SABR

Purpose: Stereotactic body radiation therapy (SBRT) / stereotactic ablative body radiotherapy (SABR) is gaining popularity, but quantitative dose tolerance has still been lacking. To improve this, the April 2016 issue of Seminars in Radiation Oncology will have normal tissue complication probability (NTCP) models for 10 critical structures: optic pathway, cochlea, oral mucosa, esophagus, chestwall, aorta, bronchi, duodenum, small bowel, and spinal cord. Methods: The project included more than 1500 treatments in 1–5 fractions using CyberKnife, Gamma Knife, or LINAC, with 60 authors from 15 institutions. NTCP models were constructed from the 97 grade 2–3 complications, predominantly scored using the common terminology criteria for adverse events (CTCAEv4). Dose volume histogram (DVH) data from each institutional dataset was loaded into the DVH Evaluator software (DiversiLabs, LLC, Huntingdon Valley, Pa) for modeling. The current state of the literature for the critical structures was depicted using DVH Risk Maps: comparative graphs of dose tolerance limits that can include estimated risk levels, reported complications, DVH data for study patients, as well as high- and low-risk dose tolerance limits. Results: For relatively acceptable toxicity like grade 1–3 rib fractures and chestwall pain, the high-risk limits have 50% risk and the low-risk limits have 5% risk. Emami et al (IJROBP 1991 May 15;21(1):109–22) used 50% and 5% risk levels for all structures, whereas this effort used clinically acceptable ranges for each: in structures like aorta or spinal cord where complications must be avoided, the high- and low-risk limits have about 3% and 1% risk, respectively, in this issue of Seminars. These statistically based guidelines can help ensure plan quality for each patient. Conclusion: NTCP for SBRT is now becoming available. Hypofractionated dose tolerance can be dramatically different than extrapolations of conventional fractionation so NTCP analysis of the SBRT/SBRT data is important to ensure safe clinical practice. Dr. Grimm, designed and holds intellectual property rights to the DVH Evaluator software tool which is an FDA-cleared product in commercial use, and was used to analyze the data.

60 APPLIED LIFE SCIENCES↗

Spy in the GPU-box: Covert and Side Channel Attacks on Multi-GPU System

The deep learning revolution has been enabled in large part by GPUs, and more recently accelerators, which make it possible to carry out computationally demanding training and inference in acceptable times. As the size of machine learning networks and workloads continues to increase, multi-GPU machines have emerged as an important platform offered on High Performance Computing and cloud data centers. Since these machines are shared among multiple users, it becomes increasingly important to protect applications against potential attacks. In this paper, we explore the vulnerability of Nvidia's DGX multi-GPU machines to covert and side channel attacks. These machines consist of a number of discrete GPUs that are interconnected through a combination of custom interconnect (NVLink) and PCIe connections. We reverse engineer the interconnected cache hierarchy and show that it is possible for an attacker on one GPU to cause contention on the L2 cache of another GPU. We use this observation to first develop a covert channel attack across two GPUs, achieving the best bandwidth of around 4 MB/s. We also develop a prime and probe attack on a remote GPU allowing an attacker to recover the cache access pattern of another workload. This access pattern can be used in any number of side channel attacks: we demonstrate a proof of concept attack that fingerprints the application running on the remote GPU, with high accuracy. We also develop a proof of concept attack to extract hyperparameters of a machine learning workload. Our work establishes for the first time the vulnerability of these machines to microarchitectural attacks and can guide future research to improve their security.

Dutta, Sankha↗

MaPPeRTrac

Massively Parallel, Portable, and Reproducible Tractography (MaPPeRTrac) is a brain tractography workflow for high performance computing. It incorporates novel technologies to simplify and accelerate neuroimaging research.

MADDURI, RAVIK↗

Massively Parallel and Portable Genomic Sequence Analysis

Massively Parallel and Portable Genomic Sequence Analysis (mappgene) is a sequencing analysis workflow for high performance computing. It incorporates novel technologies to simplify and accelerate genetics research.

Moon, Josephy↗

BES Science Network Requirements

The Energy Sciences Network (ESnet) is the primary provider of network connectivityfor the US Department of Energy Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of the Office ofScience programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years.

36 MATERIALS SCIENCE↗

Snowmass Energy Frontier Simulations

This document describes the simulation framework used in the Snowmass Energy Frontier studies for future Hadron Colliders. An overview of event generation with Madgraph5 along with parton shower and hadronization with Pythia6 is followed by a detailed description of pile-up and detector simulation with Delphes3. Details of event generation are included in a companion paper cited within this paper. The input parametrization is chosen to reflect the best object performance expected from the future ATLAS and CMS experiments; this is referred to as the "Combined Snowmass Detector". We perform simulations of pp interactions at center-of-mass energies √s = 14, 33, and 100 TeV with 0, 50, and 140 additional pp pile-up interactions. The object performance with multi-TeV pp collisions are studied for the first time using large pile-up interactions.

43 PARTICLE ACCELERATORS↗

Run 16 Tandem gold performance in the injectors and possible improvement with AGS type 6:3:1 bunch merge in the Booster

During Run 16 the Tandem was used as the Gold pre-injector for a brief time so that RHIC could continue running while EBIS was down for repairs. Given the time constraints, the setup was largely derived from the EBIS Au setup. The EBIS Au setup used a 4:2:1 bunch merge in the Booster and a 12:6:2 bunch merge in the AGS.1 This note will describe the Tandem Au setup and compare it to that used for EBIS Au. The bunch merge in the Booster for Tandem Au did not work well, and it seems likely that the performance would’ve been significantly better if it did. An AGS type 6:3:1 merge in the Booster is described which might improve matters.2 Somewhat speculative estimates for the AGS bunch intensity and emittance, if that merge were successful in reducing the Booster extraction emittance to EBIS Au levels, are also given for several potential setups. Using 6 Booster loads from the Tandem, the AGS bunch intensity at extraction reached about 2.5e9 ions with a longitudinal emittance (ε) of about 0.59 eV·s/n.3 Using 12 Booster loads from EBIS, the peak bunch intensity and ε was about 3.1e9 ions and 0.75 eV·s/n, respectively. A 6.4 sec supercycle was used for both at the time, but the Tandem Au supercycle (barring any potential issues with Tandem) could probably have been reduced to about 4.6 sec.

43 PARTICLE ACCELERATORS↗

EPICS Controlled Collimator for Controlling Beam Sizes in HIPPO

Controlling the beam spot size and shape in a diffraction experiment determines the probed sample volume. The HIPPO - High-Pressure-Preferred Orientation– neutron time-offlight diffractometer is located at the Lujan Neutron Scattering Center in Los Alamos National Laboratories. HIPPO characterizes microstructural parameters, such as phase composition, strains, grain size, or texture, of bulk (cm-sized) samples. In the current setup, the beam spot has a 10 mm diameter. Using a collimator, consisting of two pairs of neutron absorbing boron-nitride slabs, horizontal and vertical dimensions of a rectangular beam spot can be defined. Using the HIPPO robotic sample changer for sample motion, the collimator would enable scanning of e.g. cylindrical samples along the cylinder axis by probing slices of such samples. The project presented here describes implementation of such a collimator, in particular the motion control software. We utilized the EPICS (Experimental Physics Interface and Control System) software interface to integrate the collimator control into the HIPPO instrument control system. Using EPICS, commands are sent to commercial stepper motors that move the beam windows.

43 PARTICLE ACCELERATORS↗

The MARS Code System User’s Guide Version 15(2016)

This paper is a user’s guide to the current version of the MARS15 Monte Carlo code. MARS allows inclusive and, in many cases, exclusive simulations of three-dimensional hadronic and electromagnetic cascades and modeling of heavy ion, muon and low energy neutron-photon transport in accelerator, detector, spacecraft and shielding components. Particles can have energies from a fraction of an electronvolt up to about 100 TeV. The code has undergone substantial improvements since the last documented version MARS13(95) and since previous releases of MARS15; all these as well as other specific features of the MARS code system are explained in detail. Descriptions of general input and output with commentary and recommendations are given. Examples are given for running the program with distributed sources, complex compounds, arbitrary geometries, and magnetic fields. A built-in graphical-user interface allows the visualization and detailed analysis of the geometry description. Enhanced options are described for the MARS code being coupled with: the DPMJET hadron event generator, the MCNP code for low-energy neutron transport, the ANSYS system for thermal and stress analysis, physics analysis and graphics packages, the MAD accelerator lattice description via a universal MAD-MARS beam line builder, the STRUCT program for tracking particles in accelerator lattices with beam loss recording, the DETRA code for nuclide decay and transmutation calculations, the EGS5 code for precise modeling of low-energy electromagnetic showers, and the ROOT system for description and visualization of arbitrary geometries. Use of the code in a multistage mode, coupled with event generators (DPMJET), with the STRUCT program for tracking particles in accelerator lattices with beam loss recording, and with physics analysis and graphics packages is demonstrated with typical input and output examples.

43 PARTICLE ACCELERATORS↗

Development of Optimized Controls and Hardware for Synchrotron Hard X-ray Microscopes with Advanced Spectroscopic Capabilities

The technical objectives of the program were to develop an integrated, fully automated command and data interface between the TXM-Wizard developed at SLAC and the Xradia control software that is used on the Xradia Nano-TXM x-ray microscope with the goal of allowing non-experts including industry users to routinely access the advanced imaging modes that employ collection of images with spectroscopic information. The major accomplishment associated with this goal was the development of a plan to convert the TXM-Wizard software from MatLab to Python and the hiring of an expert Python programmer under contract to perform the conversion.

43 PARTICLE ACCELERATORS↗

TRIUMF BLM

Jefferson Lab developed and provided 6 BLM VME Modules to Triumf for Electron Linac. The work includes providing digital copies of the user manual, firmware, EPICS software and PCB files, performing acceptance testing and modifications to meet the requirement.

43 PARTICLE ACCELERATORS↗

Optimizing the Accelerated Recursive Doubling Algorithm for Block Tridiagonal Systems of Equations

The need to solve block tridiagonal systems with hundreds or thousands of right-hand sides for the same block tridiagonal matrix is common in a variety of disciplines. To meet this need, the Accelerated Recursive Doubling Algorithm was developed. After a right-hand side independent phase, the algorithm allows for the quick, online calculation of solutions for different right-hand sides. In this work, we present methods to optimize the Accelerated Recursive Doubling Algorithm in memory usage and computation time in a hybrid parallelization model. The right-hand side independent phase of the naïve implementation takes ≥ 11/3 the amount of memory required to store the tridiagonal matrix, while our implementation reduces the fraction to ≈ 5/3 . The right-hand side dependent phase of the naïve implementation takes ≥ 6 times the amount of memory required to store the right-hand side, while our implementation reduces the fraction to ≈ 3. The computation time for the independent phase is reduced to ≈ 2/3 times that of the naïve implementation, while the computation time for the dependent phase is reduced to ≈ 5/9 . With increasing numbers of shared-memory threads q on every distributed processing element, we have O(q) theoretical speedup.

97 MATHEMATICS AND COMPUTING↗

Studies of Conventional and ERL-Based Re-Circulator Electron Cooling for an Electron Ion Collider (Final Report)

The envisioned Electron Ion Collider will be comprised of a chain of accelerators, each employing electron cooling. Depending on the purpose, each accelerator will employ some form of electron cooling: conventional DC type, Energy Recovering Linac-based recirculator, or coherent electron cooling. Each electron cooling type has its own peculiarities that need to be studied, understood, and their performance optimized to maximize luminosity; these are the subjects of this project. In particular, we developed the first microscopic electron cooling modeling and simulation framework that was also benchmarked against experiment. We proved for the first time the feasibility of first principle, accurate and efficient electron cooling simulations with a minimal number of assumptions and approximations that match empirical studies.

43 PARTICLE ACCELERATORS↗