Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atomic Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Microtraps for neutral atoms using superconducting structures in the critical state

Recently demonstrated superconducting atom chips provide a platform for trapping atoms and coupling them to solid-state quantum systems. Controlling these devices requires a full understanding of the supercurrent distribution in the trapping structures. For type-II superconductors, this distribution is hysteretic in the critical state due to the partial penetration of the magnetic field in the thin superconducting film through pinned vortices. We report here an experimental observation of this memory effect. Our results are in good agreement with the predictions of the Bean model of the critical state without adjustable parameters. The memory effect allows to write and store permanent currents in micron-sized superconducting structures and paves the way toward engineered trapping potentials.

74 ATOMIC AND MOLECULAR PHYSICS↗

N 2 vibrational excitation in atmospheric pressure ns pulse and RF plasma jets

Time-resolved N 2 vibrational temperature and translational–rotational temperature in quasi-two-dimensional atmospheric pressure plasma jets sustained by ns pulse and RF discharges in nitrogen/noble gas mixtures are measured by the broadband vibrational Coherent Anti-Stokes Raman Scattering (CARS) . The results indicate a much stronger vibrational excitation in the RF plasma jet, due to the lower reduced electric field and higher discharge power. In a ns pulse discharge in N 2 /He, N 2 vibrational temperature is significantly lower compared to that in N 2 /Ar, due to the more rapid vibration–translation (V–T) relaxation of nitrogen by helium atoms. In the RF plasma jets in N 2 /Ne and N 2 /Ar, the vibrational excitation increases considerably as the nitrogen fraction in the mixture is reduced. The experimental data in the RF plasma jet in N 2 /Ar jet are compared with the kinetic modeling predictions. The results indicate that nitrogen vibrational excitation in N 2 /Ar plasma jets with a small N 2 fraction in the mixture (several percent) is controlled primarily by electron impact, anharmonic vibration–vibration (V–V) pumping, and V–T relaxation by N atoms. In comparison, V–V energy transfer from the vibrationally excited molecules in the first excited electronic state, N 2 (A 3 Σ u + , v), which are generated primarily by the energy transfer from the metastable Ar atoms, has a minor effect on the vibrational populations of the ground electronic state, N 2 (X 1 Σ g + , v). Although the discharge energy fraction going to electronic excitation is significant, the predicted quasi-steady-state N 2 (A 3 Σ u + ) number density, controlled by the energy pooling and quenching by N atoms, remains relatively low. Because of this, the net rate of N 2 (X 1 Σ g + ) vibrational excitation by the V–V energy transfer from N 2 (A 3 Σ u + ) is much lower compared to that by the direct electron impact. Furthermore, the results show that atmospheric pressure RF plasma jets can be used as sources of highly vibrationally excited N 2 molecules and N atoms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Global control methods for Greenberger-Horne-Zeilinger-state generation on a one-dimensional Ising chain

We discuss how to prepare an Ising chain in a GHZ state using a single global control field only. This model does not require the spins to be individually addressable and is applicable to quantum systems such as cold atoms in optical lattices, some liquid- or solid-state NMR experiments, and many nanoscale quantum structures. We show that GHZ states can always be reached asymptotically from certain easy-to-prepare initial states using adiabatic passage, and under certain conditions finite-time reachability can be ensured. To provide a reference useful for future experimental implementations, three different control strategies to achieve the objective--adiabatic passage, Lyapunov control, and optimal control--are compared, and their advantages and disadvantages discussed, in particular in the presence of realistic imperfections such as imperfect initial state preparation, system inhomogeneity, and dephasing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The adhesion, friction, and wear of binary alloys in contact with single-crystal silicon carbide

Sliding friction experiments were conducted with various iron-base alloys (alloying elements were Ti, Cr, Ni, Rh, and W) in contact with a single-crystal silicon carbide (0001) surface in vacuum. Results indicate atomic size misfit and concentration of alloying elements play a dominant role in controlling adhesion, friction, and wear properties of iron-base binary alloys. The controlling mechanism of the alloy properties is an intrinsic effect involving the resistance to shear fracture of cohesive bonding in the alloy. The coefficient of friction generally increases with an increase in solute concentration. The coefficient of friction increases as the solute-to-iron atomic radius ratio increases or decreases from unity. Alloys having higher solute concentration produce more transfer to silicon carbide than do alloys having low solute concentrations. The chemical activity of the alloying element is also an important parameter in controlling adhesion and friction of alloys.

Miyoshi, K.↗

Infrared-laser-assisted photoionization of helium by coherent extreme ultraviolet light

We investigate the infrared (IR)-laser-assisted photoionization of He by a coherent extreme ultraviolet (euv) light solving the time-dependent Schroedinger equation. A combined field of the 13th and 15th harmonics created from the same IR laser source is used to ionize He atoms coherently. We show that the ionization probabilities oscillate as a function of the time delay between the IR and the euv pulses. On the other hand, the oscillation amplitude increases as the IR intensity increases, reaches a maximum when the IR intensity is around 6x10{sup 12} W/cm{sup 2}, and then decreases as the IR intensity increases further. Decomposing the ionization probabilities by the 13th and 15th harmonics, we illustrate that the oscillation amplitude is small for a lower IR laser intensity due to the fact that the transition strength by the 13th harmonic is much smaller than the one by the 15th harmonic. When the IR intensity increases further above 6x10{sup 12} W/cm{sup 2}, the transition strength by the 13th harmonic becomes larger than the one by the 15th harmonic and the oscillation amplitude is reduced again. By tuning the relative field strengths of the 13th and 15th harmonics or the IR intensity, we can control the oscillation amplitude.

74 ATOMIC AND MOLECULAR PHYSICS↗

Spray System Documentation

The intent of this document is to provide background information on key design decisions for the Automatic Spray System, developed at LLNL. The document will overview mechanical, electrical, and toolpath critical decisions. The purpose of this design is to repeatably and uniformly spray parts with a variety of materials. The main aspects of the design are an atomizing air siphon spray nozzle and two rotary axes, C and B. Both axes are controlled by a NEMA17 stepper motor. The C axis is essentially a turntable that rotates the part to be sprayed. The B axis is where the atomizing spray nozzle is attached to the “crawler,” which is a stepper motor on an internal gear. Traditionally, spraying of hemispherical mandrels was done by a trained operator. Depending on the operator, there may be varying thickness in the spray coating. Moving towards an automated spraying system will reduce this variability and increase thickness consistency and uniformity.

42 ENGINEERING↗

Control of emission wavelength for InGaAs/GaAs quantum wells and laser structures on their basis by means of proton irradiation

Features of controlling the wavelength of emission from laser heterostructures with strained InGaAs/GaAs quantum wells by irradiation with medium-energy (with the energy as high as 150 keV) protons are studied. It is established that irradiation with H{sup +} ions and subsequent thermal annealing at a temperature of 700 deg. C make it possible to decrease the wavelength of emission from quantum wells. As the dose of ions is increased from 10{sup 13} to 10{sup 16} cm{sup -2}, the magnitude of change in the wavelength increases to 20 nm. Starting with a dose of 10{sup 15} cm{sup -2}, a significant decrease in the intensity of emission is observed. The optimum dose of H{sup +} ions (6 x 10{sup 14} cm{sup -2}) and annealing temperature (700 deg. C) for modifying the InGaAs/GaAs/InGaP laser structures are determined; it is shown that, in this case, one can obtain a shift of {approx}(8-10) nm for the wavelength of laser radiation with low losses in intensity with the quality of the surface of laser structures retained. The observed 'blue' shift is caused by implantation-stimulated processes of intermixing of the In and Ga atoms at the InGaAs/GaAs interface.

36 MATERIALS SCIENCE↗

Time- and frequency-resolved detection of atomic coherence in the regime of strong-field interaction with intense femtosecond laser pulses

Understanding the effect of strong laser pulses on the evolution of an atomic or molecular wave function is important in the context of coherent control in the strong-field regime, when power broadening and dynamic Stark shifts become comparable with or bigger than the bandwidth of the control field. We experimentally demonstrate the method of complete characterization of a complex-valued amplitude of a quantum state driven by a strong two-photon field. The method is based on coherent scattering of a weak probe pulse from the strong-field-induced atomic coherence, followed by the detection of the time- and frequency-resolved parametric four-wave-mixing signal. We show that the proposed technique corresponds to a cross-correlation frequency-resolved optical gating (XFROG) of the highly perturbed evolution of an atomic quantum state. Utilizing the XFROG retrieval algorithm, we determine both the amplitude and phase of an atomic wave function at any time moment throughout the interaction with the driving field. The direct retrieval of the time-dependent phase of the wave function, rather than the population dynamics only, enables us to observe the strong-field effects with arbitrary time and frequency resolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Friction and wear with a single-crystal abrasive grit of silicon carbide in contact with iron base binary alloys in oil: Effects of alloying element and its content

Sliding friction experiments were conducted with various iron-base binary alloys (alloying elements were Ti, Cr, Mn, Ni, Rh, and W) in contact with a rider of 0.025-millimeter-radius, single-crystal silicon carbide in mineral oil. Results indicate that atomic size and content of alloying element play a dominant role in controlling the abrasive-wear and -friction properties of iron-base binary alloys. The coefficient of friction and groove height (wear volume) general alloy decrease, and the contact pressure increases in solute content. There appears to be very good correlation of the solute to iron atomic radius ratio with the decreasing rate of coefficient of friction, the decreasing rate of groove height (wear volume), and the increasing rate of contact pressure with increasing solute content C. Those rates increase as the solute to iron atomic radius ratio increases from unity.

Miyoshi, K.↗

Adhesion, friction, and wear of binary alloys in contact with single-crystal silicon carbide

Sliding friction experiments, conducted with various iron base alloys (alloying elements are Ti, Cr, Mn, Ni, Rh and W) in contact with a single crystal silicon carbide /0001/ surface in vacuum are discussed. Results indicate atomic size misfit and concentration of alloying elements play a dominant role in controlling adhesion, friction, and wear properties of iron-base binary alloys. The controlling mechanism of the alloy properties is as an intrinsic effect involving the resistance to shear fracture of cohesive bonding in the alloy. The coefficient of friction generally increases with an increase in solute concentration. The coefficient of friction increases as the solute-to-iron atomic radius ratio increases or decreases from unity. Alloys having higher solute concentration produce more transfer to silicon carbide than do alloys having low solute concentrations. The chemical activity of the alloying element is also an important parameter in controlling adhesion and friction of alloys.

Miyoshi, K.↗

Dynamical freezing, magnetic ordering, and the magnetocaloric effect in nanostructured Fe/Cu thin films

We report dynamical freezing of Fe nanocrystallites in a Cu matrix with magnetic ordering of an FeCu interfacial phase provides a unique window into the magnetocaloric effect. The FeCu alloy altered the Fe nanocrystallite surface atoms, and with a magnetic ordering temperature comparable to the dynamical freezing temperature of the nanocrystallites enabled Fe surface atoms to contribute to the overall magnetization. Tuning the amount of interfacial alloy resulted in the control of the magnetic ordering temperature and the magnetocaloric properties.

36 MATERIALS SCIENCE↗

Designing of transparency windows by quantum interference of wave packets

It has been shown that control over the design of single- or multimode-transparency windows can be achieved by control-probe quantum interferometry using two delayed phase-locked ultrashort pulses. We have investigated how single- or multimode-transparency windows can be designed by eliminating the absorption to a set of odd or even vibrational levels of a molecule covered by the spectral bandwidth of the pulses. Suppression of absorption can be achieved by controlling the quantum interference of two vibrational wave packets excited by these two pulses, leading to destructive interference of transition amplitudes for one set of vibrational levels even or odd. Simuntaneously the interference becomes constructive for the other set of odd or even vibrational levels, leading to absorption to these levels. Thus, a set of transparency windows is designed in between two absorption peaks at two consecutive odd (even) vibrational levels by eliminating absorption at even (odd) vibrational levels between two absorption peaks. If the spectral bandwidth of the pulse [full width at half maximum (FWHM)] is less than the energy difference between two consecutive absorption peaks, the pulse will be transmitted without absorption through the transparency window. However, for pulses with a larger spectral bandwidth (FWHM), a set of broad transparency windows will be generated and different bands of pulse frequencies will be transmitted through these windows. We have shown that coherent control of the design of transparency windows can be achieved by controlling pulse duration, carrier frequency, delay, and the phase difference of two ultrashort pulses.

74 ATOMIC AND MOLECULAR PHYSICS↗

Single-Shot Readout and Weak Measurement of a Tin-Vacancy Qubit in Diamond

The negatively charged tin-vacancy center in diamond (SnV − ) is an emerging platform for building the next generation of long-distance quantum networks. This is due to the SnV − ’s favorable optical and spin properties including bright emission, insensitivity to electronic noise, and long spin coherence times at temperatures above 1 K. Here, we demonstrate measurement of a single SnV − electronic spin with a single-shot readout fidelity of 87.4%, which can be further improved to 98.5% by conditioning on multiple readouts. In the process, we develop understanding of the relationship between strain, magnetic field, spin readout, and microwave spin control. We show that high-fidelity readout is compatible with rapid microwave spin control, demonstrating a favorable parameter regime for use of the SnV − center as a high-quality spin-photon interface. Finally, we use weak quantum measurement to study measurement-induced dephasing; this illuminates the fundamental interplay between measurement and decoherence in quantum mechanics, and provides a universal method to characterize the efficiency of color-center spin readout. Taken together, these results overcome an important hurdle in the development of the SnV − -based quantum technologies and, in the process, develop techniques and understanding broadly applicable to the study of solid-state quantum emitters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Origin of preferential sputtering in a-SiO{sub 2} during ion beam synthesis of nanocrystals

Ion implantation into a-SiO{sub 2} leads to the self-assembly of nanocrystal arrays having application in optical and nonvolatile memory devices. It was recently noted that nanocrystal nucleation occurs in oxide regions exhibiting variations in oxygen concentration resulting from preferential sputtering. Here we report quantum-mechanical calculations that probe the atomic-scale dynamics following ion-induced low-energy recoils and show that preferential sputtering does not result directly from short-time collisional processes. These processes do, however, result in a population of loosely bound oxygen atoms connected to the amorphous network by a single Si-O bond. Thus, the well-known diffusion and relaxation processes that control stable defect formation at long times following recoil events lead to variations in O concentration in damaged regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoionics Drastically Accelerating Mass Transfer at Elevated Temperatures over 750 °C

Nanoionics were previously considered thermally unstable and infeasible for devices operating above 500 °C. Here, we elucidate the design principle for establishing stable nanoionics from various oxides. We utilized reversible solid oxide cells (SOCs) as the test bed and implemented nanoionics using atomic layer deposition (ALD). We demonstrate a straightforward, interface-controlled, practical approach to render a conformal, ∼15 nm thick ALD film, which initially thermodynamically favors the formation of a solid solution with the substrate into surface nanoionics with single or double layers of nanograins with random crystal orientations. The nanoionics exhibited conductivity estimated to be 7 orders of magnitude higher than that of their bulk-scale counterpart. They demonstrated conformability with uniform grain sizes of ∼15 nm, even after electrochemical operation for ∼500 h at 750 °C and 1000 h at 850 °C. The thermal stability and conductivity of such nanoionics represent a conceptual and technological framework in nanoionics.

atomic layer deposition↗

Coherent Reaction between Molecular and Atomic Bose-Einstein Condensates: Integrable Model

Here, we solve a model that describes a stimulated conversion between ultracold bosonic atoms and molecules. The reaction is triggered by a linearly time-dependent transition throughout the Feshbach resonance. Our solution predicts a dependence, with a dynamic phase transition, of the reaction efficiency on the transition rate for both atoms-to-molecule pairing and molecular dissociation processes. We find that for the latter process with a linear energy dispersion of atomic modes, the emerging phase can have a thermalized energy distribution of noninteracting bosons with the temperature defined by the rate of the transition. This provides a simple interpretation of the phase transition in terms of the creation of equilibrium Bose-Einstein condensate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electrical and gas-sensitive properties of nanostructured SnO{sub 2}:ZrO{sub 2} semiconductor films

The results of a study of the effect of atomic composition of metal-oxide semiconductor composites SnO{sub 2}:ZrO{sub 2} on the surface morphology, polycrystal grain size, resistivity, concentration, free-carrier mobility, and gas-sensitive properties of thin films (0.5-2.5 {mu}m) are presented. Films SnO{sub 2} with ZrO{sub 2} additives (the Zr content was varied from 0.5 to 4.6 at %) are grown by reactive ion-beam sputtering of metal targets of different compositions in a controlled Ar + O{sub 2} atmosphere. Using transmission electron microscopy, atomic-force microscopy, and high-resolution transmission electron microscopy, it is experimentally shown that, as the Zr content increases in the SnO{sub 2}:ZrO{sub 2} film composition, the polycrystal grain size decreases from 45 to 10 nm, the free-carrier concentration decreases almost by four orders of magnitude and the mobility increases by approximately nine times. As the Zr content increases in the SnO{sub 2}:ZrO{sub 2} film from 0.5 to 4.6 at %, the temperature of maximum gas sensitivity of films to such gases as ethanol, isopropyl alcohol, and acetone decreases by 100-190 Degree-Sign C.

36 MATERIALS SCIENCE↗

Optimal control of the strong-field ionization of silver clusters in helium droplets

Optimal control techniques combined with femtosecond laser pulse shaping are applied to steer and enhance the strong-field induced emission of highly charged atomic ions from silver clusters embedded in helium nanodroplets. With light fields shaped in amplitude and phase we observe a substantial increase of the Ag{sup q+} yield for q>10 when compared to bandwidth-limited and optimally stretched pulses. A remarkably simple double-pulse structure, containing a low-intensity prepulse and a stronger main pulse, turns out to produce the highest atomic charge states up to Ag{sup 20+}. A negative chirp during the main pulse hints at dynamic frequency locking to the cluster plasmon. A numerical optimal control study on pure silver clusters with a nanoplasma model converges to a similar pulse structure and corroborates that the optimal light field adapts to the resonant excitation of cluster surface plasmons for efficient ionization.

74 ATOMIC AND MOLECULAR PHYSICS↗