Search NASA⌕ Search

SEARCH · Search NASA

Results for “Control system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Transputer based control system for MTLRS

The Modular Transportable Laser Ranging Systems (MTLRS-1 and MTLRS-2) have been designed in the early eighties and have been in operation very successfully since 1984. The original design of the electronic control system was based on the philosophy of parallel processing, but these ideas could at that time only be implemented to a very limited extent. This present system utilizes two MOTOROLA 6800 8-bit processors slaved to a HP A-600 micro-computer. These processors support the telescope tracking system and the data-acquisition/formatting, respectively. Nevertheless, the overall design still is largely hardware oriented. Because the system is now some nine years old, aging of components increases the risk of malfunctioning and some components or units are outdated and not available anymore. The control system for MTLRS is now being re-designed completely, based on the original philosophy of parallel processing, making use of contemporary advanced electronics and processor technology. The new design aims at the requirements for Satellite Laser Ranging (SLR) in the nineties, making use of the extensive operational experience obtained with the two transportable systems.

Vermaat, Erik↗
NASA NTRS1999

Overview of the NASA Wallops Flight Facility Mobile Range Control System

The NASA GSFC's Wallops Flight Facility (WFF) Mobile Range Control System (MRCS) is based on the functionality of the WFF Range Control Center at Wallops Island, Virginia. The MRCS provides real time instantaneous impact predictions, real time flight performance data, and other critical information needed by mission and range safety personnel in support of range operations at remote launch sites. The MRCS integrates a PC telemetry processing system (TELPro), a PC radar processing system (PCDQS), multiple Silicon Graphics display workstations (IRIS), and communication links within a mobile van for worldwide support of orbital, suborbital, and aircraft missions. This paper describes the MRCS configuration; the TELPro's capability to provide single/dual telemetry tracking and vehicle state data processing; the PCDQS' capability to provide real time positional data and instantaneous impact prediction for up to 8 data sources; and the IRIS' user interface for setup/display options. With portability, PC-based data processing, high resolution graphics, and flexible multiple source support, the MRCS system is proving to be responsive to the ever-changing needs of a variety of increasingly complex missions.

Davis, Rodney A.↗
NASA NTRS1987

X-29A flight control system performance during flight test

An account is given of flight control system performance results for the X-29A forward-swept wing 'Advanced Technology Demonstrator' fighter aircraft, with attention to its software and hardware components' achievement of the requisite levels of system stability and desirable aircraft handling qualities. The Automatic Camber Control Logic is found to be well integrated with the stability loop of the aircraft. A number of flight test support software programs developed by NASA facilitated monitoring of the X-29A's stability in real time, and allowed the test team to clear the envelope with confidence.

Chin, J.↗
NASA NTRS1982

IAC control system analysis development

The MultiOptimal Differential Equation Language (MODEL) is described. It provides a means for generating numerical solutions to systems of differential equations using a digital computer. The notation of this language is similar to that usually used in describing physical systems by differential equations. Thus, the learning process is simplified, programming becomes easier, and debugging is more readily accomplished. Programs written in the MultiOptimal Differential Equation Language are machine translated into FORTRAN 4 code which is optimal in several respects. The interactive version of MODEL makes use of interactive system routines so that the user may observe the solution as it is being generated and interact with the program in a manner similar to that associated with analog simulation. The DISCOS-Control version of the MODEL simulation language is used to describe the control system for a plant which is modelled by the DISCOS program. DISCOS plant variables may be referenced in the control system description and all the sensor signals, coupling torques, momentum devices and external loads are automatically linked to the DISCOS plant model.

Frisch, H. P.↗
NASA NTRS2018

Utilizing Testing Frameworks for Launch Control Systems Continuous Integration

Command and control software is an integral part of the launch procedure. The most important part of this type of software is its ability to communicate well with the user and relay information in a correctly formatted way such that the user can understand the data. There is a tool that aides the communication between the different parts of the system, and effectively, the user. This instrument is capable of taking several complex values and ensuring that they are correctly sorted into their distinctive message values and distributed properly among the different facets of the system. This tool will easily translate and publish the data inside of messages in the system to something that is readable and understandable. The tool also allows for transmission of the recorded data to the user, effectively ensuring the communication between different components of the system. As well as keeping track of messages and ensuring that the information contained within each of them reaches the correct location, this tool has the ability to keep track of its own statistics and determine how many messages passed in were erroneous and how many were successfully transmitted. It is able to check and see what the total message failure count is when an invalid message is given, as well as the number of different messages and their respective types passed into the tool. This tool is of great value to the new Space Launch System (SLS). As such, the tool must be thoroughly tested with test cases that, although improbable, are possible, where the tool may not function properly. Testing an interface this complex is necessary to ensure mission safety and create unlikely scenarios where the tool would work as intended, and stretch its limits to test that even under the most uncommon conditions it would still continue to function. This software will be an important part of the control system for the newest spacecraft which will fly deeper into space than humans have ever travelled. It will fly beyond the moon, into deep space to Mars and perhaps set the groundwork for a manned mission even further to create more opportunities for interplanetary and even interstellar travel by humans. This mission relies heavily on software and hardware to ensure the safety of the humans that will be on board and therefore must be checked, exhausting each and every different situation, such that there is not a doubt surrounding the well-being of the humans aboard the rocket. That is why testing is such an important part of the mission. It provides evidence that the systems aboard the rocket and on the launch pad are safe.

Unit Testing↗
NASA NTRS2007

Fault Detection and Correction for the Solar Dynamics Observatory Attitude Control System

The Solar Dynamics Observatory is an Explorer-class mission that will launch in early 2009. The spacecraft will operate in a geosynchronous orbit, sending data 24 hours a day to a devoted ground station in White Sands, New Mexico. It will carry a suite of instruments designed to observe the Sun in multiple wavelengths at unprecedented resolution. The Atmospheric Imaging Assembly includes four telescopes with focal plane CCDs that can image the full solar disk in four different visible wavelengths. The Extreme-ultraviolet Variability Experiment will collect time-correlated data on the activity of the Sun's corona. The Helioseismic and Magnetic Imager will enable study of pressure waves moving through the body of the Sun. The attitude control system on Solar Dynamics Observatory is responsible for four main phases of activity. The physical safety of the spacecraft after separation must be guaranteed. Fine attitude determination and control must be sufficient for instrument calibration maneuvers. The mission science mode requires 2-arcsecond control according to error signals provided by guide telescopes on the Atmospheric Imaging Assembly, one of the three instruments to be carried. Lastly, accurate execution of linear and angular momentum changes to the spacecraft must be provided for momentum management and orbit maintenance. In th~sp aper, single-fault tolerant fault detection and correction of the Solar Dynamics Observatory attitude control system is described. The attitude control hardware suite for the mission is catalogued, with special attention to redundancy at the hardware level. Four reaction wheels are used where any three are satisfactory. Four pairs of redundant thrusters are employed for orbit change maneuvers and momentum management. Three two-axis gyroscopes provide full redundancy for rate sensing. A digital Sun sensor and two autonomous star trackers provide two-out-of-three redundancy for fine attitude determination. The use of software to maximize chances of recovery from any hardware or software fault is detailed. A generic fault detection and correction software structure is used, allowing additions, deletions, and adjustments to fault detection and correction rules. This software structure is fed by in-line fault tests that are also able to take appropriate actions to avoid corruption of the data stream.

Starin, Scott R.↗
DOE OSTI2018

Information Signals in Automatic Production Control Systems

Attention focuses on the functional relations between the information signals processed in automatic production control systems, with a view to constructing a monitoring system for network interactions that is able to detect abnormal operation. The parameters of information signals, types of functional relations, and methods of determining such relations by statistical analysis are described. The sample size for reliable determination of the basic relations between the information signals is estimated.

42 ENGINEERING↗
NASA NTRS2018

Mid-Lift-to-Drag Ratio Rigid Vehicle Control System Design and Simulation for Human Mars Entry

The Mid-Lift-to-Drag Ratio Rigid Vehicle (MRV) is a proposed candidate in the NASA Evolvable Mars Campaign's (EMC) Pathfinder Entry, Descent, and Landing (EDL) architecture study. The purpose of the study is to design a mission and vehicle capable of transporting a 20mt payload to the surface of Mars. The MRV is unique in its rigid, asymmetrical lifting-body shape which enables a higher lift-to-drag ratio (L/D) than the typical robotic Mars entry capsule vehicles that carry much less mass. This paper presents the formulation and six-degree-of-freedom (6DOF) performance of the MRV's control system, which uses both aerosurfaces and a propulsive reaction control system (RCS) to affect longitudinal and lateral directional behavior.

mars↗
NASA NTRS1987

AFTI/F-111 MAW flight control system and redundancy management description

The wing on the NASA F-111 transonic aircraft technology (TACT) airplane was modified to provide flexible leading and trailing edge flaps; this modified wing is known as the mission adaptive wing (MAW). A dual digital primary fly-by-wire flight control system was developed with analog backup reversion for redundancy. This report discusses the functions, design, and redundancy management of the flight control system for these flaps.

Larson, Richard R.↗
NASA NTRS1986

Pilot interface with fly by wire control systems

Aircraft designers are rapidly moving toward full fly by wire control systems for transport aircraft. Aside from pilot interface considerations such as location of the control input device and its basic design such as side stick, there appears to be a desire to change the fundamental way in which a pilot applies manual control. A typical design would have the lowest order of manual control be a control wheel steering mode in which the pilot is controlling an autopilot. This deprives the pilot of the tactile sense of angle of attack which is inherent in present aircraft by virtue of certification requirements for static longitudinal stability whereby a pilot must either force the aircraft away from its trim angle of attack or trim to a new angle of attack. Whether or not an aircraft actually has positive stability, it can be made to feel to a pilot as though it does by artificial feel. Artificial feel systems which interpret pilot input as pitch rate or G rate with automatic trim have proven useful in certain military combat maneuvers, but their transposition to other more normal types of manual control may not be justified.

Melvin, W. W.↗
NASA NTRS2000

Development of a Design Methodology for Reconfigurable Flight Control Systems

A methodology is presented for the design of flight control systems that exhibit stability and performance-robustness in the presence of actuator failures. The design is based upon two elements. The first element consists of a control law that will ensure at least stability in the presence of a class of actuator failures. This law is created by inner-loop, reduced-order, linear dynamic inversion, and outer-loop compensation based upon Quantitative Feedback Theory. The second element consists of adaptive compensators obtained from simple and approximate time-domain identification of the dynamics of the 'effective vehicle' with failed actuator(s). An example involving the lateral-directional control of a fighter aircraft is employed both to introduce the proposed methodology and to demonstrate its effectiveness and limitations.

Hess, Ronald A.↗
NASA NTRS2017

Thermal Control System of the ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS)

The ECOSystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) is a thermal infrared imaging multispectral scanner science mission. ECOSTRESS is designed and built by the NASA Jet Propulsion Laboratory and will be deployed on the International Space Station (ISS). ECOSTRESS will measure the water loss from growing leaves and the evaporation from the soil by measuring the temperature of plants and will gather data on the health of the agriculture system on Earth. The ISS orbit will allow ECOSTRESS to take observations at different times during each day over the seasons to provide coverage over the contiguous United States. The ECOSTRESS Thermal Control System (TCS) consists of a combination of active and passive components to maintain the ECOSTRESS components within the allowable flight temperature (AFT) limits. The active thermal control systems include mechanical cryocoolers, heaters and a single-phase pumped fluid loop for Instrument and Payload. The focal plane detector is cooled to 65K by a pair of mechanical cryocoolers and a third mechanical cryocooler cools an intermediate cold shield to 130K. The pumped fluid loop transfers the instrument waste heat to JAXA’s Japanese Exposed Module External Facility (JEM-EF) provided external fluid loop before rejection to space from the ISS radiators. The passive TCS includes multi-layer and single layer insulations, flexible thermal links and coatings on the radiometer. This paper describes the ECOSTRESS instrument TCS architecture, instrument thermal requirements and key design drivers, the top level thermal design and analysis approach, and reports preliminary test results.

Carroll, Brian↗
NASA NTRS1962

THE MERCURY CAPSULE ATTITUDE CONTROL SYSTEM

In accordance with the basic design concepts of the Mercury Capsule, the manual and automatic control systems were developed to provide a redundant and integrated method of controlling the capsule attitude. The systems were designed to meet the requirements of ballistic and orbital flight, for normal and abort missions. Since the orbital mission includes all modes of control, it will serve as a basis for the system description.

Mercury capsule↗
NASA NTRS1995

Control system design for the MOD-5A 7.3 mW wind turbine generator

This paper provides descriptions of the requirements analysis, hardware development and software development phases of the Control System design for the MOD-5A 7.3 mW Wind Turbine Generator. The system, designed by General Electric Company, Advanced Energy Programs Department, under contract DEN 3-153 with NASA Lewis Research Center and DOE, provides real time regulation of rotor speed by control of both generator torque and rotor torque. A variable speed generator system is used to provide both airgap torque control and reactive power control. The wind rotor is designed with segmented ailerons which are positioned to control blade torque. The central component of the control system, selected early in the design process, is a programmable controller used for sequencing, alarm monitoring, communication, and real time control. Development of requirements for use of aileron controlled blades and a variable speed generator required an analytical simulation that combined drivetrain, tower and blade elastic modes with wind disturbances and control behavior. An orderly two phase plan was used for controller software development. A microcomputer based turbine simulator was used to facilitate hardware and software integration and test.

Barton, Robert S.↗