Search NASA⌕ Search

SEARCH · Search NASA

Results for “Evolution operators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Safeguards Culture: Lessons Learned

Abstract: At the 2005 INMM/ESARDA Workshop in Santa Fe, New Mexico, I presented a paper entitled “Changing the Safeguards Culture: Broader Perspectives and Challenges.” That paper described a set of theoretical models that can be used as a basis for evaluating changes to safeguards culture. This paper builds on that theoretical discussion to address practical methods for influencing culture. It takes lessons from methods used to influence change in safety culture and security culture, and examines the applicability of these lessons to changing safeguards culture. Paper: At the 2005 INMM/ESARDA Workshop on “Changing the Safeguards Culture: Broader Perspectives and Challenges,” in Santa Fe, New Mexico, I presented a paper entitled “Changing the Safeguards Culture: Broader Perspectives and Challenges.” That paper, coauthored by Karyn R. Durbin and Andrew Van Duzer, described a set of theoretical models that can be used as a basis for evaluating changes to safeguards culture. This paper updates that theoretical discussion, and seeks to address practical methods for influencing culture. It takes lessons from methods used to influence change in safety culture and security culture, and examines the applicability of these lessons to changing safeguards culture. Implicit in this discussion is an understanding that improving a culture is not an end in itself, but is one method of improving the underlying discipline, that is safety, security, or safeguards. Culture can be defined as a way of life, or general customs and beliefs of a particular group of people at a particular time. There are internationally accepted definitions of safety culture and nuclear security culture. As yet, there is no official agreed upon definition of safeguards culture. At the end of the paper I will propose my definition. At the Santa Fe Workshop the summary by the Co-Chairs of Working Group 1, “The Further Evolution of Safeguards,” noted: “It is clear that ‘safeguards culture’ needs to be addressed if the efficiency and effectiveness are to continue to be improved. This will require commitment and change at all levels, from States to facility operators. Cultural change has to come from good leadership, doing the right thing and ‘beliefs’ are not sufficient – behavior is what counts. We are optimistic that with sufficient effort and the right incentives, change can be accomplished quickly.”

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

A GLOBAL GALACTIC DYNAMO WITH A CORONA CONSTRAINED BY RELATIVE HELICITY

We present a model for a global axisymmetric turbulent dynamo operating in a galaxy with a corona that treats the parameters of turbulence driven by supernovae and by magneto-rotational instability under a common formalism. The nonlinear quenching of the dynamo is alleviated by the inclusion of small-scale advective and diffusive magnetic helicity fluxes, which allow the gauge-invariant magnetic helicity to be transferred outside the disk and consequently to build up a corona during the course of dynamo action. The time-dependent dynamo equations are expressed in a separable form and solved through an eigenvector expansion constructed using the steady-state solutions of the dynamo equation. The parametric evolution of the dynamo solution allows us to estimate the final structure of the global magnetic field and the saturated value of the turbulence parameter α{sub m}, even before solving the dynamical equations for evolution of magnetic fields in the disk and the corona, along with α-quenching. We then solve these equations simultaneously to study the saturation of the large-scale magnetic field, its dependence on the small-scale magnetic helicity fluxes, and the corresponding evolution of the force-free field in the corona. The quadrupolar large-scale magnetic field in the disk is found to reach equipartition strength within a timescale of 1 Gyr. The large-scale magnetic field in the corona obtained is much weaker than the field inside the disk and has only a weak impact on the dynamo operation.

79 ASTRONOMY AND ASTROPHYSICS↗

SPH Modeling of Biomass Granular Flow: Engineering Application in Hoppers and Augers

Numerical modeling of granular biomass material flow in handling operations is indispensable to decipher flow upsets, commonly manifested as clogging and jamming in hoppers and augers. With a computational tool developed based on smoothed particle hydrodynamics (SPH), we simulated the hopper flow and auger feeding of six granular biomass materials. The good agreement between the experimental and numerical flow rates demonstrated the capability of the developed SPH solver in modeling the complicated flow of granular biomass materials. Further, the impact of physical and numerical parameters is investigated, and the major results show that the hopper flow pattern is controlled by shear band evolution; hopper clogging is collectively influenced by the opening size, wall friction, and material packing, and the impact of material compressibility on the auger feed rate is minimal. These parametric studies validate the solver’s robustness in simulating biomass flow in handling equipment and demonstrate that the SPH computational tool can provide insights about granular flow mechanics to facilitate handling equipment design and optimize handling operations.

09 BIOMASS FUELS↗

High-Entropy Surface Complex Stabilized LiCoO 2 Cathode

In this study, elevating the charge voltage of LiCoO 2 increases the energy density of batteries, which is highly enticing in energy storage implementation ranging from portable electronics to e-vehicles. However, hybrid redox reactions at high voltages facilitate oxygen evolution, electrolyte decomposition and irreversible phase change, and accordingly lead to rapid battery capacity decay. Here significantly improved high-voltage cycling stability of Mg-Al-Eu co-doped LiCoO 2 is demonstrated. It is found that element co-doping induces a near-surface high-entropy zone, including an innately thin disordered rock-salt shell and a dopant segregation surface. The high-entropy complex can effectively suppress oxygen evolution and near-surface structure deconstruction. The phase change reversibility between O3 and H1-3 and thermal stability of the cathode are greatly enhanced as well. As a result, the co-doped LiCoO 2 exhibits a remarkable cycling performance, retaining 86.3% and 72.0% of initial capacity over 800 and 2000 cycles, respectively, with a high cut-off voltage of 4.6 V. The feasible co-doping approach broadens the perspective for the development of stable lithium-ion batteries with high operating voltages.

25 ENERGY STORAGE↗

Three dimensional optimization for subsonic axial turbines operating at high unsteady inlet Mach number

In this paper, a three dimensional optimization strategy is presented to improve the performance of a subsonic axial turbine exposed to high Mach number unsteady inflows encountered in pressure gain combustors. The optimization aims at altering the stator hub and shroud end wells. A multi-objective differential evolution optimizer was used to enhance specific work and efficiency. The optimization routine consisted of a multi-step approach where in a first step an optimization was carried out where the turbine was subjected to a steady high Mach inflow. The turbine stage was parametrized via an in-house turbine design tool based on Bezier curves. Seven design parameters were selected to contour the stator end walls and rotor hub end wall. The parametrized turbine stage was meshed and the steady Reynolds-Averaged Navier-Stokes equations were solved via the commercial solver CFD++ and calculation time of each stage was around 10 hours. Results of the steady optimization identified three major design parameters of stator end walls, which were taken as inputs for the next phase unsteady optimization. For the unsteady simulations, a large inlet fluctuation was imposed and the turbine was modeled with the mixing plane approach. Total calculation time of each individual was 48 hours. An efficiency improvement of 10% from the steady optimization and 13% from the unsteady optimization was found compared to the baseline case. Finally, full unsteady simulations with two stator and three rotor passages were performed on selected steady and unsteady optimized configurations.

03 NATURAL GAS↗

Role of Mg:Al ratio and Pt promotion on mitigating the deactivation of Ni-based methane steam reforming catalysts

Ni-based catalysts for CH 4 steam reforming require fine-tuning to withstand deactivation under dynamic operation conditions relevant to emerging H 2 -driven technologies. This study investigates the impact of the Mg:Al ratio and Pt presence in catalyst composition on the activity and stability of industrially relevant Ni-based mono- and bimetallic catalysts during simulated daily start-up and shut-down cycles in various gas atmospheres. The evolution of the catalyst structure during extensive testing procedures was investigated in detail by complementary electron microscopy, in situ/operando XAS and XRD. The results obtained revealed that catalyst deactivation is promoted at high Mg:Al ratios and especially affects the monometallic catalysts. By converting CH 4 at lower temperatures, Pt regulates the extent of Ni oxidation and its incorporation into MgO lattice. Further prevention of catalyst deactivation was achieved by optimizing the reactor shut-down procedure to minimize the simultaneous exposure to high temperatures and H 2 O vapors. By flushing the reactor with N 2 only around the reaction extinction temperature, a fraction of Ni species is maintained in metallic state, which is beneficial for the long-term activity and reaction operation economy.

54 ENVIRONMENTAL SCIENCES↗

Data-driven models of nonautonomous systems

Nonautonomous dynamical systems are characterized by time-dependent inputs, which complicates the discovery of predictive models describing the spatiotemporal evolution of the state variables of quantities of interest from their temporal snapshots. When dynamic mode decomposition (DMD) is used to infer a linear model, this difficulty manifests itself in the need to approximate the time-dependent Koopman operators. Our approach is to approximate the original nonautonomous system with a modified system derived via a local parameterization of the time-dependent inputs. The modified system comprises a sequence of local parametric systems, which are subsequently approximated by a parametric surrogate model using the DRIPS (dimension reduction and interpolation in parameter space) framework. The offline step of DRIPS relies on DMD to build a linear surrogate model, endowed with reduced-order bases for the observables mapped from training data. The online step interpolates on suitable manifolds to construct a sequence of iterative parametric surrogate models; the target/test parameter points on these manifolds are specified by a local parameterization of the test time-dependent inputs. Here, we use numerical experimentation to demonstrate the robustness of our method and compare its performance with that of deep neural networks.

97 MATHEMATICS AND COMPUTING↗

Structure of iridium oxide catalysts dictates performance differences for proton exchange membrane water electrolyzers

Proton exchange membrane water electrolyzers (PEMWEs) are promising zero-emission technologies. However, their high cost remains a barrier to widespread adoption. Iridium oxide is commonly used as an oxygen evolution reaction (OER) catalyst, and its cost and scarcity make it essential to reduce its loading while increasing its activity. Evaluation of iridium oxide activity should be carried out in the membrane electrode assembly (MEA) configuration to replicate realistic operating conditions. Herein, we present a comprehensive benchmarking framework to accurately evaluate the amorphous and crystalline iridium oxides at the MEA level. By systematically varying the catalyst loading, this study confirmed that each MEA was utilized uniformly, presenting intrinsic electrochemical properties independent of the loading. Through intrinsic charge density determined by voltammetry, we established two electrochemical descriptors to evaluate catalyst redox reactions. The mass activity was evaluated by correlating current vs. loading, and the slope provides loading-independent mass activity. The effect of the porous transport layer on OER activity was discussed, identifying a ‘background’ current at zero-loading. In conclusion, this study highlights potential pitfalls in MEA-level catalyst screening and underscores the importance of the loading study for reliable results.

Kwon, Obeen [University of California, Irvine, CA ↗

Improving DFIG performance under fault scenarios through evolutionary reinforcement learning based control

The double-fed induction generator (DFIG) usually experiences high rotor current and DC capacitor link voltage during system fault events. In this paper, a novel data-driven approach is proposed to enhance the DFIG performance under fault scenarios. An advanced reinforcement learning (RL) algorithm called guided surrogate-gradient-based evolution strategy (GSES) is used to control the DFIG power and capacitor DClink voltage by adjusting the optional reference signals. This controller is able to prevent the rotor of DFIG from overcurrent risk and maintain the grid-connected operation. The proposed GSES-based control algorithm was evaluated through simulations on a 3.6-MW DFIG in PSCAD/EMTDC software. Results have validated the effectiveness of the proposed GSESbased control algorithm in improving the DFIG performance under fault scenarios.

42 ENGINEERING↗

Characterization of arcs in frequency domain

Arc detection systems are developed for ICRH on ITER to prevent arcs from damaging the RF components. One of the detectors, the Sub-Harmonic Arc Detector (SHAD) is based on the detection of the frequencies emitted in the MHz range by arcs [R1]. To ensure the high level of reliability required for this safety system, it is necessary to demonstrate that these frequencies present a signal with a Signal to Noise Ratio high enough to be detected under the wide range of operational conditions (frequency, power, configuration) and for the different types of arcs that can appear in the feeding lines and on the antennas (vacuum arc, glow discharge, multipactor-induced discharge). For each type of arc, we analyze the evolution of the frequency spectrum relative to the evolution of other electrical parameters (reflected power, voltage)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear lower hybrid modeling in tokamak plasmas

We present here new results concerning the nonlinear mechanism underlying the observed spectral broadening produced by parametric instabilities occurring at the edge of tokamak plasmas in present day LHCD (lower hybrid current drive) experiments. Low frequency (LF) ion-sound evanescent modes (quasi-modes) are the main parametric decay channel which drives a nonlinear mode coupling of lower hybrid (LH) waves. The spectrum of the LF fluctuations is calculated here considering the beating of the launched LH wave at the radiofrequency (RF) operating line frequency (pump wave) with the noisy background of the RF power generator. This spectrum is calculated in the frame of the kinetic theory, following a perturbative approach. Numerical solutions of the nonlinear LH wave equation show the evolution of the nonlinear mode coupling in condition of a finite depletion of the pump power. The role of the presence of heavy ions in a Deuterium plasma in mitigating the nonlinear effects is analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Data Management and Its Role in Delivering Science at DOE BES User Facilities – Past, Present, and Future

Abstract. The primary mission of user facilities operated by Basic Energy Sciences under the Department of Energy is to produce data for users in support of open science and basic research [1]. We trace back almost 30 years of history across selected user facilities illustrating the evolution of facility data management practices and how these practices have related to performing scientific research. The facilities cover multiple techniques such as X-ray and neutron scattering, imaging and tomography sciences. Over time, detector and data acquisition technologies have dramatically increased the ability to produce prolific volumes of data challenging the traditional paradigm of users taking data home upon completion of their experiments to process and publish their results. During this time, computing capacity has also increased dramatically, though the size of the data has grown significantly faster than the capacity of one’s laptop to manage and process this new facility produced data. Trends indicate that this will continue to be the case for yet some time. Thus users face a quandary for how to manage today’s data complexity and size as these may exceed the computing resources users have available to themselves. This same quandary can also stifle collaboration and sharing. Realizing this, some facilities are already providing web portal access to data and computing thereby providing users access to resources they need [2]. Portal based computing is now driving researchers to think about how to use the data collected at multiple facilities in an integrated way to perform their research, and also how to collaborate and share data. In the future, inter-facility data management systems will enable next tier cross-instrument-cross facility scientific research fuelled by smart applications residing upon user computer resources. We can learn from the medical imaging community that has been working since the early 1990’s to integrate data from across multiple modalities to achieve better diagnoses [3] – similarly, data fusion across BES facilities will lead to new scientific discoveries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Entanglement preservation by continuous distillation

We study the two-qubit entanglement preservation for a system in the presence of independent thermal baths. We use a combination of filtering operations and distillation protocols as a series of frequent measurements on the system. It is shown that a small fraction of the total amount of available copies of the system preserves or even improves its initial entanglement during the evolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Finding the missing baryons with fast radio bursts and Sunyaev-Zeldovich maps

Almost a third of the cosmic baryons are “missing” at low redshifts, as they reside in the invisible warm-hot intergalactic medium (WHIM). The thermal Sunyaev-Zeldovich (tSZ) effect, which measures the line-of-sight integral of the plasma pressure, can potentially detect this WHIM, although its expected signal is hidden below the noise. Extragalactic dispersion measures (DMs)—obtained through observations of fast radio bursts (FRBs)—are excellent tracers of the WHIM, as they measure the column density of plasma, regardless of its temperature. Here we propose cross correlating DMs and tSZ maps as a new way to find and characterize the missing baryons in the WHIM. Our method relies on the precise (~ arcminute) angular localization of FRBs to assign each burst a DM and a y parameter. We forecast that the signal from the WHIM should be confidently detected in a cross-correlation analysis of ~10 4 FRBs, expected to be gathered in a year of operation of the upcoming CHIME and HIRAX radio arrays, confirming the recent tentative detections of filamentary WHIM. Using this technique, future CMB probes (which might lower the tSZ noise) could determine both the temperature of the WHIM and its evolution to within tens of percent. Overall, DM-tSZ cross correlations hold great promise for studying the baryons in the local Universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum Tensor-Product Decomposition from Choi-State Tomography

The Schmidt decomposition is the go-to tool for measuring bipartite entanglement of pure quantum states. Similarly, it is possible to study the entangling features of a quantum operation using its operator-Schmidt or tensor-product decomposition. While quantum technological implementations of the former are thoroughly studied, entangling properties on the operator level are harder to extract in the quantum computational framework because of the exponential nature of sample complexity. Here, we present an algorithm for unbalanced partitions into a small subsystem and a large one (the environment) to compute the tensor-product decomposition of a unitary the effect of which on the small subsystem is captured in classical memory, while the effect on the environment is accessible as a quantum resource. This quantum algorithm may be used to make predictions about operator nonlocality and effective open quantum dynamics on a subsystem, as well as for finding low-rank approximations and low-depth compilations of quantum circuit unitaries. We demonstrate the method and its applications on a time-evolution unitary of an isotropic Heisenberg model in two dimensions. Published by the American Physical Society 2024

Mansuroglu, Refik (ORCID:000000017352513X)↗

ATR-SEIRAS Method to Measure Interfacial pH during Electrocatalytic Nitrate Reduction on Cu

This study reports the accuracy and applications of an attenuated total reflectance–surface-enhanced infrared absorption spectroscopy (ATR–SEIRAS) technique to indirectly measure the interfacial pH of the electrolyte within 10 nm of the electrocatalyst surface. This technique can be used in situ to study aqueous electrochemical reactions with a calibration range from pH 1–13, time resolution down to 4 s, and an average 95% confidence interval of 14% that varies depending on the pH region (acidic, neutral, or basic). The method is applied here to electrochemical nitrate reduction at a copper cathode to demonstrate its capabilities, but is broadly applicable to any aqueous electrochemical reaction (such as hydrogen evolution, carbon dioxide reduction, or oxygen evolution) and the electrocatalyst may be any SEIRAS-active thin film (e.g., silver, gold, or copper). The time-resolved results show a dramatic increase in the interfacial pH from pH 2–7 in the first minute of operation during both constant current and pulsed current experiments where the bulk pH is unchanged. Attempts to control the pH polarization at the surface by altering the electrochemical operating conditions—lowering the current or increasing the pulse frequency—showed no significant change, demonstrating the challenge of controlling the interfacial pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Evaluation of Energy Storage Options for Nuclear Power

Energy supply, distribution, and demand are continuing to evolve as new generation sources come online and new appliances are installed. A larger percentage of the United States (U.S.) energy mix is provided by variable energy sources such as wind and solar each year, and distributed generation is becoming more common. In parallel, an evolution in consumer products such as electrical vehicles, information technology devices for residential and industrial applications, and appliances is changing how energy is consumed. As a result of these trends, nuclear power plants (NPPs) are being called upon to operate more flexibly than ever before. Furthermore, advanced nuclear power plants (A-NPPs) might operate as part of an electricity system that looks very different than when the current NPP fleet was constructed. A-NPPs face the possibility that they will need to operate in an environment where flexibility (e.g., fast ramping) is more highly valued than stability (e.g., baseload generation for conventional demand curves). The current fleet of NPPs is struggling to remain economical in competitive markets in an era of historically low natural gas prices and renewable sources with very low marginal costs. These factors, overlaid with an ambiguous national policy related to nuclear energy and a decision-making context that struggles with multi-decade capital investments, raise key questions and present significant challenges to the economics of nuclear power in the evolving grid. Multiple factors could improve the economics of A-NPPs, including: (1) minimizing the need for active safety systems, (2) minimizing adoption of one-off reactor designs, (3) establishing policies that credit low carbon emitting technologies, and (4) integrating energy storage technologies that increase revenue and reduce costs through a combination of ancillary services, market hedging, and reduced costs via stable operation. This report focuses on Item (4), containing an overview, synthesis, and examination of energy storage options that could be integrated with nuclear generation. Figure 1 provides an overview of the 2015 energy mix by sector, which shows that NPPs are currently used exclusively for electricity generation that is ultimately consumed in the residential, commercial, and industrial sectors. Some areas for NPP energy growth in the future include power generation for electrified transportation and thermal generation for storage and industrial applications. Currently, most industrial thermal energy users combust fossil resources (i.e., coal or natural gas) to meet the energy needs of the processes, but heat from nuclear operations could also be used in certain specific applications.

25 ENERGY STORAGE↗

An Evaluation of Energy Storage Options for Nuclear Power

Energy supply, distribution, and demand are continuing to evolve as new generation sources come online and new appliances are installed. A larger percentage of the United States (U.S.) energy mix is provided by variable energy sources such as wind and solar each year, and distributed generation is becoming more common. In parallel, an evolution in consumer products such as electrical vehicles, information technology devices for residential and industrial applications, and appliances is changing how energy is consumed. As a result of these trends, nuclear power plants (NPPs) are being called upon to operate more flexibly than ever before. Furthermore, advanced nuclear power plants (A-NPPs) might operate as part of an electricity system that looks very different than when the current NPP fleet was constructed. A-NPPs face the possibility that they will need to operate in an environment where flexibility (e.g., fast ramping) is more highly valued than stability (e.g., baseload generation for conventional demand curves). The current fleet of NPPs is struggling to remain economical in competitive markets in an era of historically low natural gas prices and renewable sources with very low marginal costs. These factors, overlaid with an ambiguous national policy related to nuclear energy and a decision-making context that struggles with multi-decade capital investments, raise key questions and present significant challenges to the economics of nuclear power in the evolving grid. Multiple factors could improve the economics of A-NPPs, including: (1) minimizing the need for active safety systems, (2) minimizing adoption of one-off reactor designs, (3) establishing policies that credit low carbon emitting technologies, and (4) integrating energy storage technologies that increase revenue and reduce costs through a combination of ancillary services, market hedging, and reduced costs via stable operation. This report focuses on Item (4), containing an overview, synthesis, and examination of energy storage options that could be integrated with nuclear generation. Figure 1 provides an overview of the 2015 energy mix by sector, which shows that NPPs are currently used exclusively for electricity generation that is ultimately consumed in the residential, commercial, and industrial sectors. Some areas for NPP energy growth in the future include power generation for electrified transportation and thermal generation for storage and industrial applications. Currently, most industrial thermal energy users combust fossil resources (i.e., coal or natural gas) to meet the energy needs of the processes, but heat from nuclear operations could also be used in certain specific applications.

25 ENERGY STORAGE↗