Search NASA⌕ Search

SEARCH · Search NASA

Results for “FORESTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The use of four band multispectral photography to identify forest cover types

Four-band multispectral aerial photography and a color additive viewer were employed to identify forest cover types in Northern Alabama. The multispectral photography utilized the blue, green, red and near-infrared spectral regions and was made with black and white infrared film. On the basis of color differences alone, a differentiation between conifers and hardwoods was possible; however, supplementary information related to forest ecology proved necessary for the differentiation of various species of pines and hardwoods.

Downs, S. W., Jr.↗
NASA NTRS1978

Spectral vegetation relationships in a tropical rain forest

Jordan's (1969) spectral method of leaf-area index determination from measurements of the transmitted light at the forest floor is evaluated under a wide variety of illumination conditions in the Luquillo Rain Forest of Puerto Rico, using a hand-held radiometer. Previously suggested 'correction factors' for temporal adjustment were found to degrade the data. Quantitative use of the method was found to be restricted to high sun periods. Data collected under uniformly overcast conditions were of greater stability than under clear skies, however, stability was impaired by changes in cloud thickness. Care must be taken to minimize irradiational variability and to adquately sample the spatial variability.

Holben, B. N.↗
NASA NTRS1981

Statewide LANDSAT inventory of California forests

Six forest cover categories were mapped, along with 10 general land cover classes. To map the state's 100 million acres, 1.6 acre mapping units were utilized. Map products were created. Standing forest acreage for the state was computed to be 26.8 million acres.

Likens, W.↗
NASA NTRS1980

The application of LANDSAT remote sensing technology to natural resources management. Section 1: Introduction to VICAR - Image classification module. Section 2: Forest resource assessment of Humboldt County.

A teaching module on image classification procedures using the VICAR computer software package was developed to optimize the training benefits for users of the VICAR programs. The field test of the module is discussed. An intensive forest land inventory strategy was developed for Humboldt County. The results indicate that LANDSAT data can be computer classified to yield site specific forest resource information with high accuracy (82%). The "Douglas-fir 80%" category was found to cover approximately 21% of the county and "Mixed Conifer 80%" covering about 13%. The "Redwood 80%" resource category, which represented dense old growth trees as well as large second growth, comprised 4.0% of the total vegetation mosaic. Furthermore, the "Brush" and "Brush-Regeneration" categories were found to be a significant part of the vegetative community, with area estimates of 9.4 and 10.0%.

Fox, L., III↗
NASA NTRS1981

Effect of forest canopy closure on incoming solar radiance

In order to better understand the physical processes involved in defoliation assessment from remotely sensed data, a field study was designed to investigate the effect of forest canopy closure and other environmental variables on incoming solar radiation. Diffuse radiation measurements were recorded in red, infrared, and middle infrared wavelengths using the Mark 2 three band field radiometer. Results to date indicate that the percent canopy closure is the single most important variable affecting incoming solar radiation. In the visible and near infrared regions, interaction between time of day and date (defined later as solar zenith angle) also affect radiometric response. Aspect has only limited influence on radiance response. These same variables do not influence middle infrared response, however. Uniformity of the forest canopy appears to be more important. These results are compared to LANDSAT MSS classification results of gypsy moth defoliation.

Dottavio, C. L.↗
NASA NTRS1980

Landsat analysis of tropical forest succession employing a terrain model

Landsat multispectral scanner (MSS) data have yielded a dual classification of rain forest and shadow in an analysis of a semi-deciduous forest on Mindonoro Island, Philippines. Both a spatial terrain model, using a fifth side polynomial trend surface analysis for quantitatively estimating the general spatial variation in the data set, and a spectral terrain model, based on the MSS data, have been set up. A discriminant analysis, using both sets of data, has suggested that shadowing effects may be due primarily to local variations in the spectral regions and can therefore be compensated for through the decomposition of the spatial variation in both elevation and MSS data.

Barringer, T. H.↗
NASA NTRS1980

Stratification of forest vegetation for timber inventory using Landsat and collateral data

An automated forest stratification procedure based on Landsat and digital terrain data is reviewed. The system uses Landsat multispectral brightness values, a spatial texture channel, and digital terrain data information to divide Klamath National Forest vegetation into timber volume-homogeneous strata. The stratification process involves analyst-supervised class pooling editing, and the modeling of the regional type in a spatial manner using the digital terrain data. It is noted that for a given size and density class, the timber volume will change when the regional type changes, reflecting differences in growth potential.

Woodcock, C. E.↗
NASA NTRS1980

Computer classified Landsat data used as a forest stratifier

Results of two forest stratification projects are presented to show that Landsat data, when combined with guided clustering techniques, can provide detailed stratification of forest environment. It is shown that conifer species groupings, vegetative cover classes, and three size classes can be discriminated with accuracies ranging from 83 to 91%.

Fox, L., III↗
NASA NTRS1981

Waveband evaluation of proposed thematic mapper in forest cover classification

This study involved the evaluation of the characteristics of multispectral scanner data relative to forest cover type mapping, using NASA's NS-001 multispectral scanner to simulate the proposed Thematic Mapper (TM). The objectives were to determine: (1) the optimum number of wavebands to utilize in computer classifications of TM data; (2) which channel combinations provide the highest expected classification accuracy; and (3) the relative merit of each channel in the context of the cover classes examined. Transformed divergence was used as a measure of statistical distance between spectral class densities associated with each of twelve cover classes. The maximum overall mean pair-wise transformed divergence was used as the basis for evaluating all possible waveband combinations available for use in computer-assisted forest cover classifications.

Latty, R. S.↗
NASA NTRS1982

Detection of variations in aspen forest habitat from LANDSAT digital data: Bear River Range, Utah

The aspen forests of the Bear River Range were analyzed and mapped using data recorded on July 2, 1979 by the LANDSAT III satellite; study efforts yielded sixty-seven light signatures for the study area, of which three groups were identified as aspen and mapped at a scale of 1:24,000. Analysis and verification of the three groups were accomplished by random location of twenty-six field study plots within the LANDSAT-defined aspen areas. All study plots are included within the Cache portion of the Wasatch-Cache National Forest. The following selected site characteristics were recorded for each study plot: a list of understory species present; average percent cover density for understory species; aspen canopy cover estimates and stem measurements; and general site topographic characteristics. The study plot data were then analyzed with respect to corresponding Landsat spectral signatures. Field studies show that all twenty-six study plots are associated with one of the three aspen groups. Further study efforts concentration on characterizing the differences between the site characteristics of plots falling into each of the three aspen groups.

Merola, J. A.↗
NASA NTRS1981

FOCIS: A forest classification and inventory system using LANDSAT and digital terrain data

Accurate, cost-effective stratification of forest vegetation and timber inventory is the primary goal of a Forest Classification and Inventory System (FOCIS). Conventional timber stratification using photointerpretation can be time-consuming, costly, and inconsistent from analyst to analyst. FOCIS was designed to overcome these problems by using machine processing techniques to extract and process tonal, textural, and terrain information from registered LANDSAT multispectral and digital terrain data. Comparison of samples from timber strata identified by conventional procedures showed that both have about the same potential to reduce the variance of timber volume estimates over simple random sampling.

Strahler, A. H.↗
NASA NTRS1982

Evaluation of SLAR and simulated thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

Kershaw County, South Carolina was selected as the study site for analyzing simulated thematic mapper MSS data and dual-polarized X-band synthetic aperture radar (SAR) data. The impact of the improved spatial and spectral characteristics of the LANDSAT D thematic mapper data on computer aided analysis for forest cover type mapping was examined as well as the value of synthetic aperture radar data for differentiating forest and other cover types. The utility of pattern recognition techniques for analyzing SAR data was assessed. Topics covered include: (1) collection and of TMS and reference data; (2) reformatting, geometric and radiometric rectification, and spatial resolution degradation of TMS data; (3) development of training statistics and test data sets; (4) evaluation of different numbers and combinations of wavelength bands on classification performance; (5) comparison among three classification algorithms; and (6) the effectiveness of the principal component transformation in data analysis. The collection, digitization, reformatting, and geometric adjustment of SAR data are also discussed. Image interpretation results and classification results are presented.

Hoffer, R. M.↗
NASA NTRS1981

Off-nadir antenna bias correction using Amazon rain forest sigma deg data

The radar response from the Amazon rain forest was studied to determine the suitability of this region for use as a standard target to calibrate a scatterometer like that proposed for the National Ocean Satellite System (NOSS). Backscattering observations made by the SEASAT-1 scatterometer system show the Amazon rain forest to be a homogeneous, azimuthally-isotropic, radar target which is insensitive to polarization. The variation with angle of incidence may be adequately modeled as sigma deg (dB) = alpha theta + beta with typical values for the incidence-angle coefficient from 0.07 dB deg to 0.15 dB/deg. A small diurnal effect occurs, with measurements at sunrise being 0.5 dB to 1 dB higher than the rest of the day. Maximum likelihood estimation algorithms are presented which permit determination of relative bias and true pointing angle for each beam. Specific implementation of these algorithms for the proposed NOSS scatterometer system is also discussed.

Birrer, I. J.↗
NASA NTRS1981

Remote sensing for forest applications in New York: Two case studies

Under-utilized forest resources in the Northeast can supply fiber to new markets. Information on forest resources, however, is often too aggregated to estimate available woody material with sufficient detail for planning specific projects. Over the past year, staff of Cornell University's Remote Sensing Program, under a grant from NASA, assisted New York State agency personnel by assessing available woody material for two potential development projects, a wood-fired power plant and a particle board manufacturing plant. These feasibility studies are reviewed, illustrating how information derived from high-altitude aircraft photographs, LANDSAT imagery, and available supporting data were integrated to arrive at estimates of woody material.

Stanturf, J. A.↗
NASA NTRS1983

The application of forest classification from Landsat data as a basis for natural hydrocarbon emission estimation and photochemical oxidant model simulations in southeastern Virginia

The possible contribution by natural hydrocarbon emissions to the total ozone budget recorded in the Tidewater region of southeastern Virginia during the height of the summer period was examined. Natural sources investigated were limited to the primary HC emitters and most prevalent natural vegetation, the forests. Three types and their areal coverage were determined for Region VI of the Virginia State Air Pollution Control Board using remotely sensed data from Landsat, a NASA experimental earth resources satellite. Emission factors appropriate to the specific types (coniferous 0.24 x 10 to the 13th, mixed 0.63 x 10 to the 13th, deciduous 1.92 x 10 to the 13th, microgram/h), derived from contemporary procedures, were applied to produce an overall regional emission rate of 2.79 x 10 to the 13th microgram/h for natural non-methane hydrocarbons (NMHC). This rate was used with estimates of the anthropogenic NO(x) and NMHC loading, as input into a photochemical box model. Additional HC loading on the order of that estimated to be produced by the natural forest communities was required in order to reach certain measured summer peak ozone levels as the computer simulation was unable to account for the measured episodic levels on the basis of the anthropogenic inventory alone.

Salop, J.↗
NASA NTRS1983

Sensor data for forest policy information

NASA-Ames Research Center has investigated the role and performance capabilities of the Landsat Multi-Spectral Scanner (MSS) for forest policy analysis for the past four years in cooperation with the California Department of Forestry. A thorough series of studies, from a statewide land cover map to smaller, highly detailed studies including collateral data, have been conducted with a view to comprehensive forest policy needs. The strengths and limitations of MSS data have been evaluated. Some observations about the information needed from new satellite sensors such as the Thematic Mapper are discussed against this background.

Peterson, D. L.↗
NASA NTRS1983

Detecting forest canopy change due to insect activity using Landsat MSS

Multitemporal Landsat multispectral scanner data were analyzed to test various computer-aided analysis techniques for detecting significant forest canopy alteration. Three data transformations - differencing, ratioing, and a vegetative index difference - were tested to determine which best delineated gypsy moth defoliation. Response surface analyses were conducted to determine optimal threshold levels for the individual transformed bands and band combinations. Results indicate that, of the three transformations investigated, a vegetative index difference (VID) transformation most accurately delineates forest canopy change. Band 5 (0.6 to 0.7 micron ratioed data did nearly as well. However, other single bands and band combinations did not improve upon the band 5 ratio and VID results.

Nelson, R. F.↗
NASA NTRS1984

Interpreting Michigan forest cover types from color infrared aerial photographs

The characteristics of 17 cover types (13 forest types or tree species and 4 nonforest cover types) in Michigan are discussed as well as their interpretation from medium scale color infrared photography. The occurrence of each type is described by region and site requirements. Those attributes of a tree or stand which are helpful when attempting to interpret the type from a vertical perspective are discussed as well as common crown types. The identification of the forest type or tree species by using image characteristics (size, shape, shadow, color, texture, pattern, or association) is discussed. Ground photographs and sketches of individual trees are included. Stereograms of typical stands are available.

Hudson, W. D.↗