Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graphical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Interactive computer aided technology, evolution in the design/manufacturing process

A powerful computer-operated three dimensional graphic system and associated auxiliary computer equipment used in advanced design, production design, and manufacturing was described. This system has made these activities more productive than when using older and more conventional methods to design and build aerospace vehicles. With the use of this graphic system, designers are now able to define parts using a wide variety of geometric entities, define parts as fully surface 3-dimensional models as well as "wire-frame" models. Once geometrically defined, the designer is able to take section cuts of the surfaced model and automatically determine all of the section properties of the planar cut, lightpen detect all of the surface patches and automatically determine the volume and weight of the part. Further, his designs are defined mathematically at a degree of accuracy never before achievable.

English, C. H.↗

New atmospheric temperature results from the Pioneer Venus entry probes

A new independent determination of Venus atmospheric temperatures, derived from auxiliary engineering measurements of the Small Probe Net Flux Radiometer (SNFR) instruments on board the three small Pioneer Venus entry probes, is presented. The temperature-measurement system and the thermal model needed to convert the raw measurements to atmospheric temperatures are described. The vertical temperature structure and horizontal temperature contrast results are compared graphically measured by the SAS instrument (Seiff et al., 1980), showing a high degree of agreement.

Sromovsky, L. A.↗

Pseudo-prototyping of aerospace mechanical dynamic systems with a generalized computer program

The ADAMS computer program for automated analysis of mechanisms and machines is described. The program automatically formulates mathematical models for prototype or existing mechanisms with the minimum necessary physical and geometric data. The model can then be analyzed in various modes of analysis. The outputs (displacements, velocities, acceleration and forces) can be produced in tabular and graphical (plots, wire frame graphics) form. The application of this computer program to simulating satellite docking maneuvers is illustrated.

Sohoni, Vikram N.↗

OMV docking simulator

The Boeing Orbital Maneuvering Vehicle (OMV) Docking and Proximity Operation System (DAPOS) was completed. The system constructed involves the use of four separate processors. Appropriate software was developed that drives each of these four processors. The hand controller logic coordinates all the activities in the control station, and communicates with the OMV mathematical model. The state vector generated by the model is in turn transmitted to the control station as well as the POLY 2000 (via the ALCYON host computer) for real time graphics generation. The OMV characteristics are stored in a data file which may be easily updated and modified without disturbing the software, thereby making the system very flexible. The current system supports two types of hand controllers. The system was flown by several volunteers, some of whom are airplane pilots. A user manual is also enclosed.

Teoh, W.↗

Background stratospheric aerosol reference model

Nearly global SAGE I satellite observations in the nonvolcanic period from March 1979 to February 1980 are used to produce a reference background stratospheric aerosol optical model. Zonally average profiles of the 1.0-micron aerosol extinction for the tropics, midlatitudes, and high latitudes for both hemispheres are given in graphical and tabulated form for the different seasons. A third order polynomial fit to the vertical profile data set is used to derive analytic expressions for the seasonal global means and the yearly global mean. The results have application to the simulation of atmospheric radiative transfer and radiance calculations in atmospheric remote sensing.

Mccormick, M. P.↗

A computer model of global thermospheric winds and temperatures

Output data from the NCAR Thermospheric GCM and a vector-spherical-harmonic (VSH) representation of the wind field are used in constructing a computer model of time-dependent global horizontal vector neutral wind and temperature fields at altitude 130-300 km. The formulation of the VSH model is explained in detail, and some typical results obtained with a preliminary version (applicable to December solstice at solar maximum) are presented graphically. Good agreement with DE-2 satellite measurements is demonstrated.

Killeen, T. L.↗

Presentation planning using an integrated knowledge base

A description is given of user interface research aimed at bringing together multiple input and output modes in a way that handles mixed mode input (commands, menus, forms, natural language), interacts with a diverse collection of underlying software utilities in a uniform way, and presents the results through a combination of output modes including natural language text, maps, charts and graphs. The system, Integrated Interfaces, derives much of its ability to interact uniformly with the user and the underlying services and to build its presentations, from the information present in a central knowledge base. This knowledge base integrates models of the application domain (Navy ships in the Pacific region, in the current demonstration version); the structure of visual displays and their graphical features; the underlying services (data bases and expert systems); and interface functions. The emphasis is on a presentation planner that uses the knowledge base to produce multi-modal output. There has been a flurry of recent work in user interface management systems. (Several recent examples are listed in the references). Existing work is characterized by an attempt to relieve the software designer of the burden of handcrafting an interface for each application. The work has generally focused on intelligently handling input. This paper deals with the other end of the pipeline - presentations.

Arens, Yigal↗

Graphical explanation in an expert system for Space Station Freedom rack integration

The rationale and methodology used to incorporate graphics into explanations provided by an expert system for Space Station Freedom rack integration is examined. The rack integration task is typical of a class of constraint satisfaction problems for large programs where expertise from several areas is required. Graphically oriented approaches are used to explain the conclusions made by the system, the knowledge base content, and even at more abstract levels the control strategies employed by the system. The implemented architecture combines hypermedia and inference engine capabilities. The advantages of this architecture include: closer integration of user interface, explanation system, and knowledge base; the ability to embed links to deeper knowledge underlying the compiled knowledge used in the knowledge base; and allowing for more direct control of explanation depth and duration by the user. The graphical techniques employed range from simple statis presentation of schematics to dynamic creation of a series of pictures presented motion picture style. User models control the type, amount, and order of information presented.

Craig, F. G.↗

Design of a recovery system for a reentry vehicle

Engineers are often required to design decelerator systems which are deployed in cross-wind orientations. If the system is not designed to minimize 'line sail', damage to the parachutes could result. A Reentry Vehicle Analysis Code (RVAC) and an accompanying graphics animation software program (DISPLAY) are presented in this paper. These computer codes allow the user to quickly apply the Purvis line sail modeling technique to any vehicle and then observe the relative motion of the vehicle, nose cap, suspension lines, pilot and drogue bags and canopies on a computer screen. Data files are created which allow plots of velocities, spacial positions, and dynamic pressures versus time to be generated. The code is an important tool for the design engineer because it integrates two degrees of freedom (DOF) line sail equations with a three DOF model of the reentry body and jettisoned nose cap to provide an animated output.

Von Eckroth, Wulf↗

Far-ultraviolet imaging of the globular cluster NGC 6681 with WFPC2

We have imagined the globular cluster NGC 6681 in the far-UV and visible with Wide Field/Planetary Camera-2 (WFPC2) on the Hubble Space Telescope (HST). Our far-UV images show a sparsely populated and fully resolved central region, and we detect 122 stars. The far-UV to visible color-magnitude diagram shows a well-defined horizontal branch with no evidence for hot, more evolved descendants. We find one hot horizontal-branch star significantly below the model zero-age horizontal branch, but the rest are consistent with evolutionary models within uncertainties in calibration, distance, and reddening. The center of the cluster harbors two luminous blue stragglers. Our far-UV images graphically confirm that there is no steep density gradient at small radii among the horizontal-branch stars of this post-core-collapse cluster and show no evidence for significant color gradients.

Watson, Alan M.↗

Test Cases for a Rectangular Supercritical Wing Undergoing Pitching Oscillations

Steady and unsteady measured pressures for a Rectangular Supercritical Wing (RSW) undergoing pitching oscillations have been presented. From the several hundred compiled data points, 27 static and 36 pitching oscillation cases have been proposed for computational Test Cases to illustrate the trends with Mach number, reduced frequency, and angle of attack. The wing was designed to be a simple configuration for Computational Fluid Dynamics (CFD) comparisons. The wing had an unswept rectangular planform plus a tip of revolution, a panel aspect ratio of 2.0, a twelve per cent thick supercritical airfoil section, and no twist. The model was tested over a wide range of Mach numbers, from 0.27 to 0.90, corresponding to low subsonic flows up to strong transonic flows. The higher Mach numbers are well beyond the design Mach number such as might be required for flutter verification beyond cruise conditions. The pitching oscillations covered a broad range of reduced frequencies. Some early calculations for this wing are given for lifting pressure as calculated from a linear lifting surface program and from a transonic small perturbation program. The unsteady results were given primarily for a mild transonic condition at M = 0.70. For these cases the agreement with the data was only fair, possibly resulting from the omission of viscous effects. Supercritical airfoil sections are known to be sensitive to viscous effects (for example, one case cited). Calculations using a higher level code with the full potential equations have been presented for one of the same cases, and with the Euler equations. The agreement around the leading edge was improved, but overall the agreement was not completely satisfactory. Typically for low-aspect-ratio rectangular wings, transonic shock waves on the wing tend to sweep forward from root to tip such that there are strong three-dimensional effects. It might also be noted that for most of the test, the model was tested with free transition, but a few points were taken with an added transition strip for comparison. Some unpublished results of a rigid wing of the same airfoil and planform that was tested on the pitch and plunge apparatus mount system (PAPA) showed effects of the lower surface transition Strip on flutter at the lower subsonic Mach numbers. Significant effects of a transition strip were also obtained on a wing with a thicker supercritical section on the PAPA mount system. Both of these flutter tests on the PAPA resulted in very low reduced frequencies that may be a factor in this influence of the transition strip. However, these results indicate that correlation studies for RSW may require some attention to the estimation of transition location to accurately treat viscous effects. In this report several Test Cases are selected to illustrate trends for a variety of different conditions with emphasis on transonic flow effects. An overview of the model and tests is given and the standard formulary for these data is listed. Sample data points are presented in both tabular and graphical form. A complete tabulation and plotting of all the Test Cases is given. Only the static pressures and the real and imaginary parts of the first harmonic of the unsteady pressures are available. All the data for the test are available in electronic file form. The Test Cases are also available as separate electronic files.

Bennett, Robert M.↗

Interactive Visualization of Parking Orbits Around the Moon: An X3D Application for a NASA Lunar Mission Study

The NASA Integrated Modeling and Simulation (IM&S) project aims to develop a collaborative engineering system to include distributed analysis, integrated tools, and web-enabled graphics. Engineers on the IM&S team were tasked with applying IM&S capabilities to an orbital mechanics analysis for a lunar mission study. An interactive lunar globe was created to show 7 landing sites, contour lines depicting the energy required to reach a given site, and the optimal lunar orbit orientation to meet the mission constraints. Activation of the lunar globe rotation shows the change of the angle between the landing site latitude and the orbit plane. A heads-up-display was used to embed straightforward interface elements.

Murphy, Douglas G.↗

Anvil Forecast Tool in the Advanced Weather Interactive Processing System, Phase II

Meteorologists from the 45th Weather Squadron (45 WS) and Spaceflight Meteorology Group have identified anvil forecasting as one of their most challenging tasks when predicting the probability of violations of the Lightning Launch Commit Criteria and Space Light Rules. As a result, the Applied Meteorology Unit (AMU) created a graphical overlay tool for the Meteorological Interactive Data Display Systems (MIDDS) to indicate the threat of thunderstorm anvil clouds, using either observed or model forecast winds as input.

Barrett, Joe H., III↗

Method and Apparatus for Predicting Unsteady Pressure and Flow Rate Distribution in a Fluid Network

A method and apparatus for analyzing steady state and transient flow in a complex fluid network, modeling phase changes, compressibility, mixture thermodynamics, external body forces such as gravity and centrifugal force and conjugate heat transfer. In some embodiments, a graphical user interface provides for the interactive development of a fluid network simulation having nodes and branches. In some embodiments, mass, energy, and specific conservation equations are solved at the nodes, and momentum conservation equations are solved in the branches. In some embodiments, contained herein are data objects for computing thermodynamic and thermophysical properties for fluids. In some embodiments, the systems of equations describing the fluid network are solved by a hybrid numerical method that is a combination of the Newton-Raphson and successive substitution methods.

Majumdar, Alok K.↗

FastScript3D - A Companion to Java 3D

FastScript3D is a computer program, written in the Java 3D(TM) programming language, that establishes an alternative language that helps users who lack expertise in Java 3D to use Java 3D for constructing three-dimensional (3D)-appearing graphics. The FastScript3D language provides a set of simple, intuitive, one-line text-string commands for creating, controlling, and animating 3D models. The first word in a string is the name of a command; the rest of the string contains the data arguments for the command. The commands can also be used as an aid to learning Java 3D. Developers can extend the language by adding custom text-string commands. The commands can define new 3D objects or load representations of 3D objects from files in formats compatible with such other software systems as X3D. The text strings can be easily integrated into other languages. FastScript3D facilitates communication between scripting languages [which enable programming of hyper-text markup language (HTML) documents to interact with users] and Java 3D. The FastScript3D language can be extended and customized on both the scripting side and the Java 3D side.

Koenig, Patti↗

Artificial Intelligence Software for Assessing Postural Stability

A software package reads and analyzes pressure distributions from sensors mounted under a person's feet. Pressure data from sensors mounted in shoes, or in a platform, can be used to provide a description of postural stability (assessing competence to deficiency) and enables the determination of the person's present activity (running, walking, squatting, falling). This package has three parts: a preprocessing algorithm for reading input from pressure sensors; a Hidden Markov Model (HMM), which is used to determine the person's present activity and level of sensing-motor competence; and a suite of graphical algorithms, which allows visual representation of the person's activity and vestibular function over time.

Lieberman, Erez↗

Mean Flow Augmented Acoustics in Rocket Systems

Oscillatory motion in solid rocket motors and liquid engines has long been a subject of concern. Many rockets display violent fluctuations in pressure, velocity, and temperature originating from the complex interactions between the combustion process and gas dynamics. The customary approach to modeling acoustic waves inside a rocket chamber is to apply the classical inhomogeneous wave equation to the combustion gas. The assumption of a linear, non-dissipative wave in a quiescent fluid remains valid while the acoustic amplitudes are small and local gas velocities stay below Mach 0.2. The converging section of a rocket nozzle, where gradients in pressure, density, and velocity become large, is a notable region where this approach is not applicable. The expulsion of unsteady energy through the nozzle of a rocket is identified as the predominate source of acoustic damping for most rocket systems. An accurate model of the acoustic behavior within this region where acoustic modes are influenced by the presence of a steady mean flow is required for reliable stability predictions. Recently, an approach to address nozzle damping with mean flow effects was implemented by French [1]. This new approach extends the work originated by Sigman and Zinn [2] by solving the acoustic velocity potential equation (AVPE) formulated by perturbing the Euler equations [3]. The acoustic velocity potential (psi) describing the acoustic wave motion in the presence of an inhomogeneous steady high-speed flow is defined by, (del squared)(psi) − (lambda/c)(exp 2)(psi) − M(dot)[M(dot)(del)(del(psi))] − 2(lambda(M/c) + (M(dot)del(M))(dot)del(psi)−2(lambda)(psi)[M(dot)del(1/c)]=0 (1) with M as the Mach vector, c as the speed of sound, and lambda as the complex eigenvalue. French apply the finite volume method to solve the steady flow field within the combustion chamber and nozzle with inviscid walls. The complex eigenvalues and eigenvector are determined with the use of the ARPACK eigensolver. The present study employs the COMSOL Multphysics framework to solve the coupled eigenvalue problem using the finite element approach. The study requires one way coupling of the CFD High Mach Number Flow (HMNF) and mathematics module. The HMNF module evaluated the gas flow inside of a solid rocket motor using St. Robert's law modeling solid propellant burn rate, slip boundary conditions, and the supersonic outflow condition. Results from the HMNF model are used by the coefficient form of the mathematics module to determine the eigenvalues of the AVPE. The mathematics model is truncated at the nozzle sonic line, where a zero flux boundary condition is self-satisfying. The remaining boundaries are modeled with a zero flux boundary condition, assuming zero acoustic absorption on all surfaces. Pertinent results from these analyses are the complex valued eigenvalue and eigenvectors. Comparisons are made to the French results to evaluate the modeling approach. A comparison of the French results with that of the present analysis is displayed in figures 1 and 2, respectively. The graphic shows the first tangential eigenvector's real (a) and imaginary (b) values.

Fischbach, Sean R.↗

Decision support model for evaluating biofuel development along the U.S.-Mexico border.

Recently, Sandia National Laboratories and General Motors cooperated on the development of the Biofuels Deployment Model (BDM) to assess the feasibility, implications, limitations, and enablers of producing 90 billion gallons of ethanol per year by 2030. Leveraging the past investment, a decision support model based on the BDM is being developed to assist investors, entrepreneurs, and decision makers in evaluating the costs and benefits associated with biofuels development in the U.S.-Mexico border region. Specifically, the model is designed to assist investors and entrepreneurs in assessing the risks and opportunities associated with alternative biofuels development strategies along the U.S.-Mexico border, as well as, assist local and regional decision makers in understanding the tradeoffs such development poses to their communities. The decision support model is developed in a system dynamics framework utilizing a modular architecture that integrates the key systems of feedstock production, transportation, and conversion. The model adopts a 30-year planning horizon, operating on an annual time step. Spatially the model is disaggregated at the county level on the U.S. side of the border and at the municipos level on the Mexican side. The model extent includes Luna, Hildalgo, Dona Anna, and Otero counties in New Mexico, El Paso and Hudspeth counties in Texas, and the four munipos along the U.S. border in Chihuahua. The model considers a variety of feedstocks; specifically, algae, gitropha, castor oil, and agricultural waste products from chili and pecans - identifying suitable lands for these feedstocks, possible yields, and required water use. The model also evaluates the carbon balance for each crop and provides insight into production costs including labor demands. Finally, the model is fitted with an interactive user interface comprised of a variety of controls (e.g., slider bars, radio buttons), descriptive text, and output graphics allowing stakeholders to directly explore the tradeoffs between alternative biofuels development scenarios.

09 BIOMASS FUELS↗