Search NASA⌕ Search

SEARCH · Search NASA

Results for “Loss function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Probabilistic methods in a study of trip setpoints

Most early vintage Boiling Water Reactors have a high head and high capacity High Pressure Coolant Injection (HPCI) pump to keep the core covered following a loss of coolant accident (LOCA). However, the protection afforded by the HPCI pump for mitigating a LOCA introduces the potential that a spurious start of the HPCI pump could oversupply the reactor vessel and lead to an automatic trip of the main turbine due to high water level. A turbine trip and associated increase in moderator density could challenge the bases of fuel integrity operating limits. To prevent turbine trip during spurious operation of the HPCI pump, the reactor protection system includes instrumentation and logic to sense high water level and automatically trip the HPCI pump prior to reaching the turbine trip setpoint. This paper describes an analysis that was performed to determine if existing reactor vessel water level trip instrumentation, logic and setpoints result in a high probability that the HPCI pump will trip prior to actuation of the turbine trip. Using nominal values for the initial water level and for the HPCI pump and turbine trip setpoints, and using the probability distribution functions for measurement uncertainty in these setpoints, a Monte Carlo simulation was employed to determine probabilities of successfully tripping the HPCI pump prior to tripping of the turbine. The results of the analysis established that the existing setpoints, instrumentation and logic would be expected to reliably prevent a trip of the main turbine. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

In Situ 29 Si solid-state NMR study of grafting of organoalkoxysilanes to mesoporous silica nanoparticles

We report that since the catalytic activity and the stability of silica-bound organometallic complexes are affected by their interactions with hydroxyl groups on the surface, isolated hydroxyls are often created prior to the introduction of catalytic species. Here, we investigate a method to remove the indigenous hydroxyls and create new isolated hydroxyls by grafting organo-trimethoxysilane (R-TMS) to generate a silicon T 2 site, (≡SiO-) 2 SiR(-OH). We used in situ 29 Si solid-state NMR experiments to monitor the evolution of T n sites, (≡SiO - ) n SiR(-OH) 3-n (n = 1, 2, 3). The study indicates that i) the grafting proceeds in a consecutive manner as T 1 → T 2 → T 3 , and ii) the kinetics depend on the type of functional groups in the silane. However, the rates of T 1 formation and T 2 → T 3 conversion are also controlled to a significant extent by the entropy loss associated to the initial silane binding and the spatial arrangement of surface hydroxyls, respectively. The grafting of R-TMS with a basic functional group leads to a lower concentration of T 1 sites. The nucleophilicity of the functional group facilitates the grafting process by lowering the enthalpy barrier, while the T 1 formation rate is more influenced by the entropy barrier than the T 1 → T 2 conversion rate. Thus, the basic functional group promotes the T 1 → T 2 conversion more than the T 1 formation, resulting in a lower concentration of T 1 sites.

36 MATERIALS SCIENCE↗

Effects of root litter traits on soil organic matter dynamics depend on decay stage and root branching order

Decaying roots contribute disproportionately to soil organic carbon (SOC) stocks in many ecosystems, yet few studies have examined the afterlife effects of root trait variability on the formation, stability and mineralization of SOC. In order to assess how root functional class (absorptive vs. transport) and mycorrhizal association (ectomycorrhizal vs. arbuscular mycorrhizal fungi) affect both formation and loss of SOC, we decayed lower-order absorptive (orders 1–2) and higher-order transport (orders 3–4) roots from six arbuscular mycorrhizal (AM) and six ectomycorrhizal (EcM) associated hardwood tree species in an isotopically distinct soil under laboratory conditions. We found that root litter effects on SOC differed significantly among root functional classes and mycorrhizal types. AM absorptive and transport roots (high in nitrogen and soluble compounds) contributed more to the formation of new mineral-associated organic carbon (MAOC), but also contributed to higher mineralization of native SOC (via priming effects). Moreover, absorptive AM roots formed MAOC gradually and rates saturated, whereas ECM roots formed MAOC more quickly, despite slower decay (via greater formation efficiency). Altogether, these findings demonstrate how different combinations of root traits might contribute to soil C balance, and that failure to account for the chemical and morphological heterogeneity of roots, as well their interactions with microbes over time, may lead to incorrect projections of SOC stocks and turnover.

59 BASIC BIOLOGICAL SCIENCES↗

Structures of KaiC Circadian Clock Mutant Proteins: A New Phosphorylation Site at T426 and Mechanisms of Kinase, ATPase and Phosphatase

The circadian clock of the cyanobacterium Synechococcus elongatus can be reconstituted in vitro by three proteins, KaiA, KaiB and KaiC. Homo-hexameric KaiC displays kinase, phosphatase and ATPase activities; KaiA enhances KaiC phosphorylation and KaiB antagonizes KaiA. Phosphorylation and dephosphorylation of the two known sites in the C-terminal half of KaiC subunits, T432 and S431, follow a strict order (TS {yields} pTS {yields} pTpS {yields} TpS {yields} TS) over the daily cycle, the origin of which is not understood. To address this void and to analyze the roles of KaiC active site residues, in particular T426, we determined structures of single and double P-site mutants of S. elongatus KaiC. The conformations of the loop region harboring P-site residues T432 and S431 in the crystal structures of six KaiC mutant proteins exhibit subtle differences that result in various distances between Thr (or Ala/Asn/Glu) and Ser (or Ala/Asp) residues and the ATP {gamma}-phosphate. T432 is phosphorylated first because it lies consistently closer to P{gamma}. The structures of the S431A and T432E/S431A mutants reveal phosphorylation at T426. The environments of the latter residue in the structures and functional data for T426 mutants in vitro and in vivo imply a role in dephosphorylation. We provide evidence for a third phosphorylation site in KaiC at T426. T426 and S431 are closely spaced and a KaiC subunit cannot carry phosphates at both sites simultaneously. Fewer subunits are phosphorylated at T426 in the two KaiC mutants compared to phosphorylated T432 and/or S431 residues in the structures of wt and other mutant KaiCs, suggesting that T426 phosphorylation may be labile. The structures combined with functional data for a host of KaiC mutant proteins help rationalize why S431 trails T432 in the loss of its phosphate and shed light on the mechanisms of the KaiC kinase, ATPase and phosphatase activities.

36 MATERIALS SCIENCE↗

A Variable Pressure Multi-Pressure Rail System Design for Agricultural Applications

This paper presents a solution for reducing energy loss in the hydraulic control system of agricultural tractors and their implements. The solution is referred to as a multi-pressure rail (MPR) and provides power to the hydraulic functions following a pressure control logic, as opposed to the traditional flow control logic typical of hydraulic systems used in off-road vehicles. The proposed hydraulic control system allows for elimination of redundant flow control valves in the state-of-the-art system, which cause excessive throttling losses leading to poor overall energy efficiency. Related work on MPR technology targets construction vehicles, where the MPR solution can allow energy recovery during overrunning loads and better engine management. This paper alternatively addresses the case of agricultural applications where functions mostly operate under resistive load conditions with slow dynamics, which offers an opportunity to target throttle losses. For this purpose, the paper introduces a variable pressure control strategy to handle the instantaneous pressure at each rail. To develop both the controller and the hydraulic system architecture, a stationary test rig is conceived and used to validate a numerical simulation model of the MPR system and its control strategy. Particular focus is given to the dynamic behavior of the system during the switches of a function between different pressure rails, which needs to ensure reduced oscillations of the flow provided to each hydraulic function. Once validated, the simulation model is used to predict the energy savings of the MPR solution in an actual application: a 435 hp hydraulic tractor powering a 16-row planter, for which operating features during typical drive cycles were available to the authors. The results show up to 59% total power reduction at the pump shaft, corresponding to 89.8% system efficiency gain.

36 MATERIALS SCIENCE↗

SOX1 links the function of neural patterning and Notch signalling in the ventral spinal cord during the neuron-glial fate switch

During neural development the transition from neurogenesis to gliogenesis, known as the neuron-glial ({Nu}/G) fate switch, requires the coordinated function of patterning factors, pro-glial factors and Notch signalling. How this process is coordinated in the embryonic spinal cord is poorly understood. Here, we demonstrate that during the N/G fate switch in the ventral spinal cord (vSC) SOX1 links the function of neural patterning and Notch signalling. We show that, SOX1 expression in the vSC is regulated by PAX6, NKX2.2 and Notch signalling in a domain-specific manner. We further show that SOX1 regulates the expression of Hes1 and that loss of Sox1 leads to enhanced production of oligodendrocyte precursors from the pMN. Finally, we show that Notch signalling functions upstream of SOX1 during this fate switch and is independently required for the acquisition of the glial fate perse by regulating Nuclear Factor I A expression in a PAX6/SOX1/HES1/HES5-independent manner. These data integrate functional roles of neural patterning factors, Notch signalling and SOX1 during gliogenesis.

60 APPLIED LIFE SCIENCES↗

Progressive hearing loss and degeneration of hair cell stereocilia in taperin gene knockout mice

The TPRN gene encodes taperin, which is prominently present at the taper region of hair cell stereocilia. Mutations in TPRN have been reported to cause autosomal recessive nonsyndromic deafness 79(DFNB 79). To investigate the role of taperin in pathogenesis of hearing loss, we generated TPRN knockout mice using TALEN technique. Sanger sequencing confirmed an 11 bp deletion at nucleotide 177–187 in exon 1 of TPRN, which results in a truncated form of taperin protein. Heterozygous TPRN{sup +/−} mice showed apparently normal auditory phenotypes to their wide-type (WT) littermates. Homozygous TPRN{sup −/−} mice exhibited progressive sensorineural hearing loss as reflected by auditory brainstem response to both click and tone burst stimuli at postnatal days 15 (P15), 30 (P30), and 60 (P60). Alex Fluor-594 phalloidin labeling showed no obvious difference in hair cell numbers in the cochlea between TPRN{sup −/−} mice and WT mice under light microscope. However, scanning electronic microscopy revealed progressive degeneration of inner hair cell stereocilia, from apparently normal at postnatal days 3 (P3) to scattered absence at P15 and further to substantial loss at P30. The outer hair cell stereocilia also showed progressive degeneration, though much less severe, Collectively, we conclude that taperin plays an important role in maintenance of hair cell stereocilia. Establishment of TPRN knockout mice enables further investigation into the function of this gene. - Highlights: • TPRN{sup −/−} mice were generated using TALEN technique. • TPRN{sup −/−} mice presented progressive hearing loss. • WT and TPRN{sup −/−} mice showed no difference in hair cell numbers. • TPRN{sup −/−} mice showed progressive degeneration of hair cell stereocilia.

60 APPLIED LIFE SCIENCES↗

A valuation framework for customers impacted by extreme temperature-related outages

Extreme temperature outages can lead to not just economic losses but also various non-energy impacts (NEI), such as increased mortality rates, property damage, and reduced productivity, due to significant degradation of indoor operating conditions caused by service disruptions. However, existing resilience assessment approaches lack specificity for extreme temperature conditions. They often overlook temperature-related mortality and neglect the customer characteristics and grid response in the calculation, despite the significant influence of these factors on NEI-related economic losses. This paper aims to address these gaps by introducing a comprehensive framework to estimate the impact of resilience enhancement not only on the direct economic losses incurred by customers but also on potential NEI, including mortality and the value of statistical life during extreme temperature-related outages. The proposed resilience valuation integrates customer characteristics and grid response variables based on a scalable grid simulation environment. This study adopts a holistic approach to quantify customer-oriented economic impacts, utilizing probabilistic loss scenarios that incorporate health-related factors and damage/loss models as a function of exposure for valuation. The proposed methodology is demonstrated through comparative resilient outage planning, using grid response models emulating a Texas weather zone during the 2021 winter storm Uri. The case study results show that enhanced outage planning with hardened infrastructure can improve the system resilience and thereby reduce the relative risk of mortality by 16% and save the total costs related to non-energy impacts by 74%. In conclusion, these findings underscore the efficacy of the framework by assessing the financial implications of each case, providing valuable insights for decision-makers and stakeholders involved in extreme-weather related resilience planning for risk management and mitigation strategies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Internal hydraulic analysis of impeller rounding in centrifugal pumps as turbines

The use of pumps as turbines in different applications has been gaining importance in the recent years, but the subject of hydraulic optimization still remains an open research problem. One of these optimization techniques that include rounding of the sharp edges at the impeller periphery (or turbine inlet) has shown tendencies of performance enhancement. In order to understand the effect of this hydraulic optimization, the paper introduces an analytical model in the pump as turbine control volume and brings out the functionalities of the internal variables classified under control variables consisting of the system loss coefficient and exit relative flow direction and under dependent variables consisting of net tangential flow velocity, net head and efficiency. The paper studies the effects of impeller rounding on a combination of radial flow and mixed flow pumps as turbines using experimental data. The impeller rounding is seen to have positive impact on the overall efficiency in different operating regions with an improvement in the range of 1-3%. The behaviour of the two control variables have been elaborately studied in which it is found that the system loss coefficient has reduced drastically due to rounding effects, while the extent of changes to the exit relative flow direction seems to be limited in comparison. The reasons for changes to these control variables have been physically interpreted and attributed to the behaviour of the wake zone at the turbine inlet and circulation within the impeller control volume. The larger picture of impeller rounding has been discussed in comparison with performance prediction models in pumps as turbines. The possible limitations of the analytical model as well as the test setup are also presented. The paper concludes that the impeller rounding technique is very important for performance optimization and recommends its application on all pump as turbine projects. It also recommends the standardization of the rounding effects over wide range of pump shapes including axial pumps. (author)

42 ENGINEERING↗

Improved gas sensing and dielectric properties of Fe doped hydroxyapatite thick films: Effect of molar concentrations

Highlights: • We report improved gas sensing and dielectric characteristics of Fe ion exchanged HAp films. • Fe doped HAp film shows maximum gas response at relatively lower temperature. • Response and gas uptake capacity of sensors is improved for appropriate amount of Fe ions in HAp matrix. • Fe-HAp films exhibit remarkable improvement in dielectric properties compared to pure HAp. • Fe doped HAp films show significant improvement in gas sensing as well as in dielectric properties. - Abstract: In the present work Fe doped hydroxyapatite (Fe-HAp) thick films has been successfully utilized to improve the gas sensing as well as its dielectric properties. Initially, HAp nano powder is synthesized by chemical precipitation process and later on Fe ions are doped in HAp by ion exchange process. Structural and morphological modifications are observed by means of X-ray diffraction and scanning electron microscopy analysis. The sensing parameters such as operating temperature, response/recovery time and gas uptake capacity are experimentally determined. The Fe-HAp (0.05 M) film shows improved CO and CO{sub 2} gas sensing capacity at lower operating temperature compared to pure HAp. Moreover, variation of dielectric constant and dielectric loss for pure and Fe-HAp thick films are studied as a function of frequency in the range of 10 Hz–1 MHz. The study reveals that Fe doped HAp thick films improve the sensing and dielectric characteristics as compared to pure HAp.

36 MATERIALS SCIENCE↗

Measurement of the Shared Momentum Fraction z g using Jet Reconstruction in p + p and Au + Au Collisions with STAR

One key difference in current energy loss models lies in the treatment of the Altarelli-Parisi, AP, splitting functions. It has been shown that the shared momentum fraction , henceforth called Jet Splitting Function z g as determined by the SoftDrop grooming process can be made a Sudakov-safe measurement of the symmetrized AP functions in p+p collisions. The STAR collaboration presents the first z g measurements at $ \sqrt{s}$NN = 200 GeV in p+p and Au+Au collisions, where in Au+Au we use a set of di-jets with hard cores reconstructed with a 2 GeV/c constituent cut. For a jet resolution parameter of R = 0.4, these di-jet pairs were found to be significantly imbalanced with respect to p+p, yet regained balance when all soft constituents were included. As a result, we find that within uncertainties there are no signs of a modified Jet Splitting Function on trigger or recoil sides of this di-jet selection.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear modification factor of light neutral-meson spectra up to high transverse momentum in p–Pb collisions at s NN = 8.16 TeV

Neutral pion (π 0 ) and η meson production cross sections were measured up to unprecedentedly high transverse momenta (p T ) in p–Pb collisions at √ s NN = 8.16 TeV. The mesons were reconstructed via their two-photon decay channel in the rapidity interval –1.3 < y < 0.3 in the ranges of 0.4 < p T < 200 GeV/c and 1.0 < p T < 50 GeV/c, respectively. The respective nuclear modification factor (R pPb ) is presented for p T up to of 200 and 30 GeV/c, where the former was achieved by extending the π 0 measurement in pp collisions at √s = 8 TeV using the merged cluster technique. The values of R pPb are below unity for p T < 10 GeV/c, while they are consistent with unity for p T > 10 GeV/c, leaving essentially no room for final state energy loss. The new data provide strong constraints for nuclear parton distribution and fragmentation functions over a broad kinematic range and are compared to model predictions as well as previous results at √ s NN = 5.02 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reaction pathways of furfural, furfuryl alcohol and 2-methylfuran on Cu(111) and NiCu bimetallic surfaces

Hydrodeoxygenation (HDO) is an important reaction for converting biomass-derived furfural to value-added 2-methylfuran, which is a promising fuel additive. In this work, the HDO of furfural to produce 2-methylfuran occurred on the NiCu bimetallic surfaces prepared on either Ni(111) or Cu(111). The reaction pathways of furfural were investigated on Cu(111) and Ni/Cu(111) surfaces using density functional theory (DFT) calculations, temperature programmed desorption (TPD) and high resolution electron energy loss spectroscopy (HREELS) experiments. These studies provided mechanistic insights into the effects of bimetallic formation on enhancing the HDO activity. Specifically, furfural weakly adsorbed on Cu(111), while it strongly adsorbed on Ni/Cu(111) through an η 2 (C,O) configuration which led to the HDO of furfural on Ni/Cu(111). Lastly, the ability to dissociate H 2 on Ni/Cu(111) is also an important factor for enhancing the HDO activity over Cu(111).

2-Methylfuran↗

Flow distribution analysis on the cooling tube network of ITER thermal shield

Thermal shield (TS) is to be installed between the vacuum vessel or the cryostat and the magnets in ITER tokamak to reduce the thermal radiation load to the magnets operating at 4.2K. The TS is cooled by pressurized helium gas at the inlet temperature of 80K. The cooling tube is welded on the TS panel surface and the composed flow network of the TS cooling tubes is complex. The flow rate in each panel should be matched to the thermal design value for effective radiation shielding. This paper presents one dimensional analysis on the flow distribution of cooling tube network for the ITER TS. The hydraulic cooling tube network is modeled by an electrical analogy. Only the cooling tube on the TS surface and its connecting pipe from the manifold are considered in the analysis model. Considering the frictional factor and the local loss in the cooling tube, the hydraulic resistance is expressed as a linear function with respect to mass flow rate. Sub-circuits in the TS are analyzed separately because each circuit is controlled by its own control valve independently. It is found that flow rates in some panels are insufficient compared with the design values. In order to improve the flow distribution, two kinds of design modifications are proposed. The first one is to connect the tubes of the adjacent panels. This will increase the resistance of the tube on the panel where the flow rate is excessive. The other design suggestion is that an orifice is installed at the exit of tube routing where the flow rate is to be reduced. The analysis for the design suggestions shows that the flow mal-distribution is improved significantly.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An alternative mechanism for the methylation of phosphoethanolamine catalyzed by Plasmodium falciparum phosphoethanolamine methyltransferase

Here, the phosphobase methylation pathway catalyzed by the phosphoethanolamine methyltransferase in Plasmodium falciparum (PfPMT), the malaria parasite, offers an attractive target for anti-parasitic drug development. PfPMT methylates phosphoethanolamine (pEA) to phosphocholine for use in membrane biogenesis. Quantum mechanics and molecular mechanics (QM/MM) calculations tested the proposed reaction mechanism for methylation of pEA involving the previously identified Tyr-19–His-132 dyad, which indicated an energetically unfavorable mechanism. Instead, the QM/MM calculations suggested an alternative mechanism involving Asp-128. The reaction coordinate involves the stepwise transfer of a proton to Asp-128 via a bridging water molecule followed by a typical S n 2-type methyl transfer from S-adenosylmethionine to pEA. Functional analysis of the D128A, D128E, D128Q, and D128N PfPMT mutants shows a loss of activity with pEA but not with the final substrate of the methylation pathway. X-ray crystal structures of the PfPMT-D128A mutant in complex with S-adenosylhomocysteine and either pEA or phosphocholine reveal how mutation of Asp-128 disrupts a hydrogen bond network in the active site. The combined QM/MM, biochemical, and structural studies identify a key role for Asp-128 in the initial step of the phosphobase methylation pathway in Plasmodium and provide molecular insight on the evolution of multiple activities in the active site of the PMT.

59 BASIC BIOLOGICAL SCIENCES↗

SERENDIPITOUS DISCOVERY OF AN OVERDENSITY OF Ly{alpha} EMITTERS AT z {approx} 4.8 IN THE CL1604 SUPERCLUSTER FIELD

We present results of a spectroscopic search for Ly{alpha} emitters (LAEs) in the Cl1604 supercluster field using the extensive spectroscopic Keck/DEep Imaging Multi-Object Spectrograph database taken as part of the Observations of Redshift Evolution in Large-Scale Environments survey. A total of 12 slitmasks were observed and inspected in the Cl1604 field, spanning a survey volume of 1.365 x 10{sup 4} comoving Mpc{sup 3}. We find a total of 17 high-redshift (4.39 {<=} z {<=} 5.67) LAE candidates down to a limiting flux of 1.9 x 10{sup -18} erg s{sup -1} cm{sup -2} (L(Ly{alpha}) = 4.6 x 10{sup 41} erg s{sup -1} or {approx}0.1 L {sub *} at z {approx} 5), 13 of which we classify as high quality. The resulting LAE number density is nearly double that of LAEs found in the Subaru deep field at z {approx} 4.9 and nearly an order of magnitude higher than in other surveys of LAEs at similar redshifts, an excess that is essentially independent of LAE luminosity. We also report on the discovery of two possible LAE group structures at z {approx} 4.4 and z {approx} 4.8 and investigate the effects of cosmic variance of LAEs on our results. Fitting a simple truncated single Gaussian model to a composite spectrum of the 13 high-quality LAE candidates, we find a best-fit stellar velocity dispersion of 136 km s{sup -1}. Additionally, we see modest evidence of a second peak in the composite spectrum, possibly caused by galactic outflows, offset from the main velocity centroid of the LAE population by {approx}440 km s{sup -1} as well as evidence for a nontrivial Ly{alpha} escape fraction. We find an average star formation rate density (SFRD) of {approx}5 x 10{sup -3} M {sub sun} yr{sup -1} Mpc{sup -3} with moderate evidence for negative evolution in the SFRD from z {approx} 4.6 to z {approx} 5.7. By simulating the statistical flux loss due to our observational setup, we measure a best-fit luminosity function characterized by {phi}{sub *} L {sub *} = 2.2{sup +3.9} {sub -1.3} x 10{sup 39} erg s{sup -1} Mpc{sup -3} for {alpha} = -1.6, generally consistent with measurements from other surveys at similar epochs. Finally, we investigate any possible effects from weak or strong gravitational lensing induced by the foreground supercluster, finding that our LAE candidates are minimally affected by lensing processes.

99 GENERAL AND MISCELLANEOUS↗

Mitigation of DESI fiber assignment incompleteness effect on two-point clustering with small angular scale truncated estimators

We present a method to mitigate the effects of fiber assignment incompleteness in two-point power spectrum and correlation function measurements from galaxy spectroscopic surveys, by truncating small angular scales from estimators. We derive the corresponding modified correlation function and power spectrum windows to account for the small angular scale truncation in the theory prediction. We validate this approach on simulations reproducing the Dark Energy Spectroscopic Instrument (DESI) Data Release 1 (DR1) with and without fiber assignment. We show that we recover unbiased cosmological constraints using small angular scale truncated estimators from simulations with fiber assignment incompleteness, with respect to standard estimators from complete simulations. Additionally, we present an approach to remove the sensitivity of the fits to high k modes in the theoretical power spectrum, by applying a transformation to the data vector and window matrix. We find that our method efficiently mitigates the effect of fiber assignment incompleteness in two-point correlation function and power spectrum measurements, at low computational cost and with little statistical loss.

79 ASTRONOMY AND ASTROPHYSICS↗

Modal expansion approach to optical-frequency-comb generation with monolithic whispering-gallery-mode resonators

We describe a general framework based on modal expansion for the study of optical-frequency combs generated with monolithic whispering-gallery-mode resonators. We obtain a set of time-domain rate equations describing the dynamics of each mode as a function of the main characteristics of the cavity, namely, Kerr nonlinearity, absorption, coupling losses, and cavity dispersion (geometrical and material). A stability analysis of the various side modes is performed, which finds analytically the threshold power needed for comb generation. We show that the various whispering gallery modes are excited in a nontrivial way, strongly dependent on the value of the overall cavity dispersion. We demonstrate that the combs are not simply generated through a direct transfer of energy from the pumped mode to all their neighbors but rather through complex intermediate interactions. Anomalous cavity dispersion is also demonstrated to be critical for these cascading processes, and comb generation is thereby unambiguously linked to modulational instability. This theory accurately describes the emergence of spectral modulation and free spectral-range tunability in the comb. It also enables a clear understanding of the various phenomena responsible for the spectral span limitation. Our theoretical predictions are in excellent agreement with the numerical simulations, and they successfully explain the internal mechanisms responsible for the generation of hundreds of Kerr modes in monolithic whispering-gallery-mode resonators.

43 PARTICLE ACCELERATORS↗