Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC CORES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Design of Fluxgate Sensors for Different Applications from Geology to Medicine

In this study, we have shown that fluxgate sensors can be used for different application areas. Alternative sensor configurations have been developed for three different application areas. These are mainly rod- and ring-type fluxgate sensors. In the first study, a measurement system with the rod-type fluxgate sensor has been developed in order to monitor the local magnetic field distributions on a magnetic tape (e.g., credit card). With this system, the magnetic recording data on the credit card were measured and imaged successfully. The second and the third application areas, which are monitoring the influence of solar storms on the earth field and heartbeat analysis of mankind, were carried out by using a ring-core fluxgate sensor geometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-neutron stripping in ({sup 18}O, {sup 16}O) and (t,p) reactions

The {sup 12}C({sup 18}O,{sup 16}O){sup 14}C reactions has been investigated at 84 MeV incident energy. The charged ejectiles produced in the reaction have been momentum analyzed and identified by the MAGNEX magnetic spectrometer. Q-value spectra have been extracted with an energy resolution of 160 keV (Full Width at Half Maximum) and several known bound and resonant states of {sup 14}C have been identified up to 15 MeV. In particular, excited states with dominant 2p - 4h configuration are the most populated. The absolute values of the cross sections have been extracted showing a striking similarity with those measured for the same transitions by (t,p) reactions. This indicates that the effect of the {sup 16}O core is negligible in the reaction mechanism.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TCR Central Shutdown Rod Fine Motion Control

Transformational Challenge Reactor (TCR) is a Helium cooled 3 MWt test reactor that leverages advances in materials and manufacturing, computing, and AI in its design. Classical design of a shutdown rod uses either gravity, pneumatic, or springs to quickly release the Central Shutdown Rod (CSR) containing neutron absorber into the reactor core stopping nuclear reaction. Generally, the motor/actuator resides outside the reactor, but the motion is transmitted through a penetration into the pressure vessel. There are also designs where the control rod drive incorporates magnetic latches with coil residing outside the pressure boundary for precise position control of the rod. We are proposing a magnetic coupling to position the shutdown rod without any penetration into the pressure vessel for the entire drive length of TCR shutdown rod. Electromagnets are currently used in non-power nuclear reactors for shutdown rods, but these electromagnets are resident inside the reactor pressure vessel. This paper will describe the use of an electromagnet outside the pressure vessel to position and release the shutdown rod. A prototype was developed at ORNL to demonstrate the concept, and a design optimization of the ferritic core and material was conducted to maximize the lift force of the electromagnet. An elevated temperature testing was also performed to ensure that the system will perform under the temperature conditions inside an operating reactor.

Fountain, Eliott J.↗

Nonlinear propagation of coherent electromagnetic waves in a dense magnetized plasma

We present an investigation of the nonlinear propagation of high-frequency coherent electromagnetic waves in a uniform quantum magnetoplasma. Specifically, we consider nonlinear couplings of right-hand circularly polarized electromagnetic-electron-cyclotron (CPEM-EC) waves with dispersive shear Alfven (DSA) and dispersive compressional Alfven (DCA) perturbations in plasmas composed of degenerate electron fluids and non-degenerate ion fluids. Such interactions lead to amplitude modulation of the CPEM-EC wave packets, the dynamics of which is governed by a three-dimensional nonlinear Schroedinger equation (NLSE) with the frequency shift arising from the relativistic electron mass increase in the CPEM-EC fields and density perturbations associated with the DSA and DCA perturbations. Accounting for the electromagnetic and quantum forces, we derive the evolution equation for the DSA and DCA waves in the presence of the magnetic field-aligned ponderomotive force of the CPEM-EC waves. The NLSE and the driven DSA and DCA equations are then used to investigate the modulational instability. The relevance of our investigation to laser-plasma interaction experiments and the cores of white dwarf stars is pointed out.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ION AND NEUTRAL MOLECULES IN THE W43-MM1(G30.79 FIR 10) INFALLING CLUMP

The high-mass star-forming clump W43-MM1 has been mapped in N{sub 2}H{sup +}(4 {yields} 3), C{sup 18}O(3 {yields} 2), SiO(8 {yields} 7), and in a single pointing in DCO{sup +}(5 {yields} 4) toward the center of the clump. Column densities from these observations as well as previous HCO{sup +}(4 {yields} 3), H{sup 13}CO{sup +}(4 {yields} 3), HCN(4 {yields} 3), H{sup 13}CN(4 {yields} 3), and CS(7 {yields} 6) data have been derived using the RADEX code; results later have been used to derive chemical abundances at selected points in the MM1 main axis. We compare with chemical models to estimate an evolutionary age of 10{sup 4} years for a remarkable warm hot core inside MM1. We also proposed that the dust temperature derived from the spectral energy distribution fitting in MM1 is not representative of the gas temperature deep inside the clump because dust emission may have become optically thick. By deriving a deuterium fractionation of 1.2 Multiplication-Sign 10{sup 3}, we estimate an electron fraction of X(e) = 6.5 Multiplication-Sign 10{sup -8}. Thus, the coupling between the neutral gas and the magnetic field is estimated by computing the ambipolar diffusion Reynolds number R{sub m} = 18 and the wave coupling number W = 110. Considering that the infalling speed is slightly supersonic (M = 1.1) but sub-Alfvenic, we conclude that the MM1 clump has recently been or is in the process of decoupling the field from the neutral fluid. Thus, the MM1 clump appears to be in an intermediate stage of evolution in which a hot core has developed while the envelope is still infalling and not fully decoupled from the ambient magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of the moving structures in a coronal bright point

We have explored the moving structures in a coronal bright point (CBP) observed by the Solar Dynamic Observatory Atmospheric Imaging Assembly (AIA) on 2011 March 5. This CBP event has a lifetime of ∼20 minutes and is bright with a curved shape along a magnetic loop connecting a pair of negative and positive fields. AIA imaging observations show that a lot of bright structures are moving intermittently along the loop legs toward the two footpoints from the CBP brightness core. Such moving bright structures are clearly seen at AIA 304 Å. In order to analyze their features, the CBP is cut along the motion direction with a curved slit which is wide enough to cover the bulk of the CBP. After integrating the flux along the slit width, we get the spacetime slices at nine AIA wavelengths. The oblique streaks starting from the edge of the CBP brightness core are identified as moving bright structures, especially on the derivative images of the brightness spacetime slices. They seem to originate from the same position near the loop top. We find that these oblique streaks are bi-directional, simultaneous, symmetrical, and periodic. The average speed is about 380 km s{sup –1}, and the period is typically between 80 and 100 s. Nonlinear force-free field extrapolation shows the possibility that magnetic reconnection takes place during the CBP, and our findings indicate that these moving bright structures could be the observational outflows after magnetic reconnection in the CBP.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron thermal transport within magnetic islands in the reversed-field pinch

Tearing mode induced magnetic islands have a significant impact on the thermal characteristics of magnetically confined plasmas such as those in the reversed-field pinch (RFP). New Thomson scattering diagnostic capability on the Madison Symmetric Torus (MST) RFP has enabled measurement of the thermal transport characteristics of islands. Electron temperature (T{sub e}) profiles can now be acquired at 25 kHz, sufficient to measure the effect of an island on the profile as the island rotates by the measurement point. In standard MST plasmas with a spectrum of unstable tearing modes, remnant islands are present in the core between sawtoothlike reconnection events. Associated with these island remnants is flattening of the T{sub e} profile inside the island separatricies. This flattening is characteristic of rapid parallel heat conduction along helical magnetic field lines. In striking contrast, a temperature gradient within an m=1, n=5 island is observed in these same plasmas just after a sawtooth event when the m=1, n=5 mode may briefly come into resonance near the magnetic axis. This suggests local heating and relatively good confinement within the island. Local power balance calculations suggest reduced thermal transport within this island relative to the confinement properties of standard MST discharges between reconnection events. The magnetic field and island structure is modeled with three-dimensional nonlinear resistive magnetohydrodynamic simulations (DEBS code) with Lundquist numbers matching those in MST during standard discharges. During improved confinement plasmas with reduced tearing mode activity, temperature fluctuations correlated with magnetic signals are small with characteristic fluctuation amplitudes of order T-tilde{sub e}/T{sub e}approx2%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The link between turbulence, magnetic fields, filaments, and star formation in the central molecular zone cloud G0.253+0.016

Star formation is primarily controlled by the interplay between gravity, turbulence, and magnetic fields. However, the turbulence and magnetic fields in molecular clouds near the Galactic center may differ substantially compared to spiral-arm clouds. Here we determine the physical parameters of the central molecular zone (CMZ) cloud G0.253+0.016, its turbulence, magnetic field, and filamentary structure. Using column density maps based on dust-continuum emission observations with ALMA+Herschel, we identify filaments and show that at least one dense core is located along them. We measure the filament width W{sub fil}=0.17±0.08 pc and the sonic scale λ{sub sonic}=0.15±0.11 pc of the turbulence, and find W{sub fil}≈λ{sub sonic}. A strong velocity gradient is seen in the HNCO intensity-weighted velocity maps obtained with ALMA+Mopra. The gradient is likely caused by large-scale shearing of G0.253+0.016, producing a wide double-peaked velocity probability distribution function (PDF). After subtracting the gradient to isolate the turbulent motions, we find a nearly Gaussian velocity PDF typical for turbulence. We measure the total and turbulent velocity dispersion, 8.8±0.2 km s{sup −1} and 3.9±0.1 km s{sup −1}, respectively. Using magnetohydrodynamical turbulence simulations, we find that G0.253+0.016's turbulent magnetic field B{sub turb}=130±50 μG is only ≲1/10 of the ordered field component. Combining these measurements, we reconstruct the dominant turbulence driving mode in G0.253+0.016 and find a driving parameter of b=0.22±0.12, indicating solenoidal (divergence-free) driving. We compare this to spiral-arm clouds, which typically have a significant compressive (curl-free) driving component (b>0.4). Motivated by previous reports of strong shearing motions in the CMZ, we speculate that shear causes the solenoidal driving in G0.253+0.016 and show that this reduces the star-formation rate by a factor of 6.9 compared to typical nearby clouds.

79 ASTRONOMY AND ASTROPHYSICS↗

Reproducibility of the coil positioning in Nb3Sn magnet models through magnetic measurements.

The random part of the integral field harmonics in a series of superconducting magnets has been used in the past to identify the reproducibility of the coil positioning. Using a magnetic model and a MonteCarlo approach, coil blocks are randomly moved and the amplitude that best fits the magnetic measurements is interpreted as the reproducibility of the coil position. Previous values for r.m.s. coil displacements for Nb-Ti magnets range from 0.05 to 0.01 mm. In this paper, we use this approach to estimate the reproducibility in the coil position for Nb{sub 3}Sn short models that have been built in the framework of the FNAL core program (HFDA dipoles) and of the LARP program (TQ quadrupoles). Our analysis shows that the Nb{sub 3}Sn models manufactured in the past years correspond to r.m.s. coil displacements of at least 5 times what is found for the series production of a mature Nb-Ti technology. On the other hand, the variability of the field harmonics along the magnet axis shows that Nb3Sn magnets have already reached values similar to these obtained for Nb-Ti ones.

43 PARTICLE ACCELERATORS↗

Progress of Divertor Heat and Particle Flux Control in EAST for Advanced Steady-State Operation in the Last 10 Years

Active control of the excessively high heat and particle fluxes on the divertor target plates is of fundamental importance to the steady state operation of tokamaks, especially for fusion reactors. A series of experiments have been carried out on this critical issue to relieve the plasma-wall interactions in the experimental advanced superconducting tokamak (EAST) in the last ten years, not only contributing to the long pulse operation of EAST itself, but also providing physical understandings and potential techniques to the next-generation devices like ITER. Here we have characterized the power deposition pattern and broadened the divertor footprint width effectively. The plasma-wetted area is actively handled using either 3-dimentional edge magnetic topology or advanced plasma equilibrium, thereby peak heat flux around the strike point is reduced. Active control of detachment or radiation compatible with core plasma performance has progressed significantly in very recent years, with a series of active feedback control modules developed and utilized successfully, based on the divertor physics advances with both experiments and simulation. The upper divertor of EAST was upgraded from graphite to active water-cooling ITER-like tungsten in 2014, exhibiting much enhanced heat removal capability. As for the particle exhaust including both fueling and impurity particles, in addition to wall conditioning and impurity source control, the efficiency of particle flux exhaust is optimized by making full use of the divertor closure and the plasma drifts in both scrape-off layer and divertor volume. These heat and particle exhaust advances contribute greatly to a series of EAST achievements like H-mode operation over 100 s. A brief near-term plan on the integrated control of divertor plasma-wall interactions in long-time scale will also be introduced, aiming to provide favorable divertor operation solution for ITER and CFETR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The accurate particle tracer code

The Accurate Particle Tracer (APT) code is designed for systematic large-scale applications of geometric algorithms for particle dynamical simulations. Based on a large variety of advanced geometric algorithms, APT possesses long-term numerical accuracy and stability, which are critical for solving multi-scale and nonlinear problems. To provide a flexible and convenient I/O interface, the libraries of Lua and Hdf5 are used. Following a three-step procedure, users can efficiently extend the libraries of electromagnetic configurations, external non-electromagnetic forces, particle pushers, and initialization approaches by use of the extendible module. APT has been used in simulations of key physical problems, such as runaway electrons in tokamaks and energetic particles in Van Allen belt. As an important realization, the APT-SW version has been successfully distributed on the world’s fastest computer, the Sunway TaihuLight supercomputer, by supporting master–slave architecture of Sunway many-core processors. Here, based on large-scale simulations of a runaway beam under parameters of the ITER tokamak, it is revealed that the magnetic ripple field can disperse the pitch-angle distribution significantly and improve the confinement of energetic runaway beam on the same time.

97 MATHEMATICS AND COMPUTING↗

Chemical vapour deposition of graphene on Nk(111) and Co(0001) and intercalation with Au to study Dirac Cone Formation and Rashba splitting

We show in detail monitoring by photoelectron spectroscopy how graphene can be grown by chemical vapor deposition on the transition-metal surfaces Ni(111) and Co(0001) and intercalated by a monoatomic layer of Au. For both systems, a linear E(k) dispersion of massless Dirac fermions appears in the graphene {pi}-band in the vicinity of the Fermi energy. In order to study ferromagnetism and spin-orbit effects by spin- and angle-resolved photoelectron spectroscopy, the sample must be magnetized in remanence. To this end, a W(110) substrate is prepared, its cleanliness verified by photoemission from W(110) surface states and surface core levels, and epitaxial Ni(111) and Co(0001) thin films are grown on top. Spin-resolved photoemission from the {pi}-band shows that the ferromagnetic polarization of graphene/Ni(111) and graphene/Co(0001) is negligible and that graphene on Ni(111) is after intercalation of Au spin-orbit split by the Rashba effect.

36 MATERIALS SCIENCE↗

Power and particle exhaust for the ARC fusion power plant

To successfully show that fusion is an attractive energy source, the ARCTM fusion power plant will need to operate with a robust, integrated power and particle exhaust solution. To maximise ARC’s fusion power output while avoiding excessive erosion of the plasma-facing components, we will need to radiatively dissipate most of the power crossing the last-closed flux surface, injecting radiating impurities such as argon or neon to access divertor detachment. Divertor detachment will need to be integrated with a high-performance core plasma, and with efficient impurity pumping to prevent the accumulation of helium ash in the core. To access and control detachment in high-performance plasmas, we have designed ARC with up–down-symmetric divertors, with secondary X-points in long, tightly baffled outer legs. Using a core-edge modelling workflow, we predict that with this divertor design, ARC will access detachment with modest argon seeding in the divertor (c Ar,div ∼0.9%), which should have minimal impact on the core ( Z eff,core <0.5) for reasonable argon enrichment (c Ar,div /c Ar,core =6). Due to the high predicted divertor neutral pressure (p div ∼20 Pa), we predict that ARC will sufficiently pump helium to limit ash accumulation in the core (c He,core <2%) for a helium enrichment of c He,div /c He,core =0.4. ARC’s divertor design is expected to increase the stability of a detachment front in the outer divertor leg, helping to prevent divertor reattachment during smaller heat-flux transients such as scrape-off-layer filaments associated with the quasi-continuous exhaust regime. However, this buffering will not be sufficient to prevent divertor reattachment during large type-I edge-localised modes (ELMs), and as such these will need to be avoided on ARC. Experiments on SPARC will be used to select an integrated scenario which avoids or mitigates type-I-ELMs while maintaining access to detachment, good core fusion performance and sufficient impurity exhaust. SPARC experiments will also be used to finalise ARC’s divertor design, by studying the impact of magnetic and first-wall geometry on detachment stability, impurity enrichment and neutral baffling under conditions similar to those expected for ARC. In conclusion, our analysis finds that ARC will have a viable power and particle exhaust solution which is compatible with high-power operations, and this solution will be validated in experiments on SPARC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tuning giant anomalous Hall resistance ratio in perpendicular Hall balance

Anomalous Hall effect at room temperature in perpendicular Hall balance with a core structure of [Pt/Co]{sub 4}/NiO/[Co/Pt]{sub 4} has been tuned by functional CoO layers, where [Pt/Co]{sub 4} multilayers exhibit perpendicular magnetic anisotropy. A giant Hall resistance ratio up to 69 900% and saturation Hall resistance (R{sub S}{sup P}) up to 2590 mΩ were obtained in CoO/[Pt/Co]{sub 4}/NiO/[Co/Pt]{sub 4}/CoO system, which is 302% and 146% larger than that in the structure without CoO layers, respectively. Transmission electron microscopy shows highly textured [Co/Pt]{sub 4} multilayers and oxide layers with local epitaxial relations, indicating that the crystallographic structure has significant influence on spin dependent transport properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Divertor heat flux mitigation in high-performance H-mode discharges in the National Spherical Torus Experiment

Experiments conducted in high-performance 1.0 and 1.2 MA 6 MW NBI-heated H-mode discharges with a high magnetic flux expansion radiative divertor in NSTX demonstrate that significant divertor peak heat flux reduction and access to detachment may be facilitated naturally in a highly shaped spherical torus (ST) configuration. Improved plasma performance with high beta(t) = 15-25%, a high bootstrap current fraction f(BS) = 45-50%, longer plasma pulses and an H-mode regime with smaller ELMs has been achieved in the strongly shaped lower single null configuration with elongation kappa = 2.2-2.4 and triangularity delta = 0.7-0.8. Divertor peak heat fluxes were reduced from 6-12 to 0.5-2 MW m(-2) in ELMy H-mode discharges using the inherently high magnetic flux expansion f(m) = 15-25 and the partial detachment of the outer strike point at several D-2 injection rates. A good core confinement and pedestal characteristics were maintained, while the core carbon concentration and the associated Z(eff) were reduced. The partially detached divertor regime was characterized by an increase in divertor radiated power, a reduction in ion flux to the plate and a large neutral compression ratio. Spectroscopic measurements indicated the formation of a high-density, low-temperature region adjacent to the outer strike point, where substantial increases in the volume recombination rate and C II, CIII emission rates were measured.

Soukhanovskii, V. A.↗

Performance and properties of the first plasmas of Wendelstein 7-X

The optimized, superconducting stellarator Wendelstein 7-X went into operation and delivered first measurement data after 15 years of construction and one year commissioning. Errors in the magnet assembly were confirmend to be small. Plasma operation was started with 5 MW electron cyclotron resonance heating (ECRH) power and five inboard limiters. Core plasma values of ${{T}_{\text{e}}}>8$ keV, ${{T}_{\text{i}}}>2$ keV at line-integrated densities $n\approx 3\centerdot {{10}^{19}}~{{\text{m}}^{-2}}$ were achieved, exceeding the original expectations by about a factor of two. Indications for a core-electron-root were found. The energy confinement times are in line with the international stellarator scaling, despite unfavourable wall conditions, i.e. large areas of metal surfaces and particle sources from the limiter close to the plasma volume. Well controlled shorter hydrogen discharges at higher power (4 MW ECRH power for 1 s) and longer discharges at lower power (0.7 MW ECRH power for 6 s) could be routinely established after proper wall conditioning. Lastly, the fairly large set of diagnostic systems running in the end of the 10 weeks operation campaign provided first insights into expected and unexpected physics of optimized stellarators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Most Massive White Dwarfs in the Solar Neighborhood

We present an analysis of the most massive white dwarf candidates in the Montreal White Dwarf Database 100 pc sample. We identify 25 objects that would be more massive than 1.3M ⊙ if they had pure H atmospheres and CO cores, including two outliers with unusually high photometric mass estimates near the Chandrasekhar limit. We provide follow-up spectroscopy of these two white dwarfs and show that they are indeed significantly below this limit. We expand our model calculations for CO core white dwarfs up to M = 1.334 M ⊙ , which corresponds to the high-density limit of our equation-of-state tables, ρ = 109 g cm -3 . We find many objects close to this maximum mass of our CO core models. A significant fraction of ultramassive white dwarfs are predicted to form through binary mergers. Merger populations can reveal themselves through their kinematics, magnetism, or rapid rotation rates. We identify four outliers in transverse velocity, four likely magnetic white dwarfs (one of which is also an outlier in transverse velocity), and one with rapid rotation, indicating that at least 8 of the 25 ultramassive white dwarfs in our sample are likely merger products.

79 ASTRONOMY AND ASTROPHYSICS↗

Mechanisms for spin supersolidity in S=(1/2) spin-dimer antiferromagnets

Using perturbative expansions and the contractor renormalization (CORE) algorithm, we obtain effective hard-core bosonic Hamiltonians describing the low-energy physics of S=1/2 spin-dimer antiferromagnets known to display supersolid phases under an applied magnetic field. The resulting effective models are investigated by means of mean-field analysis and quantum Monte Carlo simulations. A 'leapfrog mechanism,' through means of which extra singlets delocalize in a checkerboard-solid environment via correlated hoppings, is unveiled that accounts for the supersolid behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗