Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Microstructural and mechanical characteristics of Ni–Cr thin films

Highlights: • Ni–Cr thin films of varied composition deposited by DC magnetron co-sputtering. • Thin film with Ni–Cr: 80–20 at% composition exhibits most distinct behavior. • The films were tensile tested and exhibited no cracking till the substrate yielding. - Abstract: Ni–Cr alloy thin films have been deposited using magnetron co-sputtering technique at room temperature. Crystal structure was evaluated using GIXRD. Ni–Cr solid solution upto 40 at% of Cr exhibited fcc solid solution of Cr in Ni and beyond that it exhibited bcc solid solution of Ni in Cr. X-ray diffraction analysis shows formation of (1 1 1) fiber texture in fcc and (2 2 0) fiber texture in bcc Ni–Cr thin films. Electron microscopy in both in-plane and transverse direction of the film surface revealed the presence of columnar microstructure for films having Cr upto 40 at%. Mechanical properties of the films are evaluated using nanoindentation. The modulus values increased with increase of Cr at% till the film is fcc. With further increase in Cr at% the modulus values decreased. Ni–Cr film with 20 at% Ni exhibits reduction in modulus and is correlated to the poor crystallization of the film as reflected in XRD analysis. The Ni–Cr thin film with 80 at% Ni and 20 at% Cr exhibited the most distinct columnar structure with highest electrical resistivity, indentation hardness and elastic modulus.

36 MATERIALS SCIENCE↗

Synthesis and characterization of titanium-alloyed hematite thin films for photoelectrochemical water splitting

We have synthesized pure and Ti-alloyed hematite thin films on F doped SnO{sub 2} coated glass substrates by radio frequency magnetron co-sputtering of iron oxide and titanium targets in mixed Ar/O{sub 2} and mixed N{sub 2}/O{sub 2} ambient. We found that the hematite films deposited in the N{sub 2}/O{sub 2} ambient exhibit much poorer crystallinity than the films deposited in the Ar/O{sub 2} ambient. We determined that Ti alloying leads to increased electron carrier concentration and crystallinity, and reduced bandgaps. Moreover, Ti-alloyed hematite thin films exhibited improved photoelectrochemical performance as compared with the pure hematite films: The photocurrents were enhanced and the photocurrent onset shifted to less positive potentials.

36 MATERIALS SCIENCE↗

The electronic structure of co-sputtered zinc indium tin oxide thin films

Zinc indium tin oxide (ZITO) transparent conductive oxide layers were deposited via radio frequency (RF) magnetron co-sputtering at room temperature. A series of samples with gradually varying zinc content was investigated. The samples were characterized with x-ray and ultraviolet photoemission spectroscopy (XPS, UPS) to determine the electronic structure of the surface. Valence and conduction bands maxima (VBM, CBM), and work function were determined. The experiments indicate that increasing Zn content results in films with a higher defect rate at the surface leading to the formation of a degenerately doped surface layer if the Zn content surpasses {approx}50%. Furthermore, the experiments demonstrate that ZITO is susceptible to ultraviolet light induced work function reduction, similar to what was earlier observed on ITO and TiO{sub 2} films.

36 MATERIALS SCIENCE↗

Heterogeneous Morphologies and Hardness of Co-Sputtered Thin Films of Concentrated Cu-Mo-W Alloys

Heterogeneous microstructures in Cu-Mo-W alloy thin films formed by magnetron co-sputtering immiscible elements with concentrated compositions are characterized using scanning transmission electron microscopy (STEM) and nanoindentation. In this work, we modified the phase separated structure of a Cu-Mo immiscible system by adding W, which impedes surface diffusion during film growth. The heterogeneous microstructures in the Cu-Mo-W ternary system exhibited bicontinuous matrices and agglomerates composed of Mo(W)-rich phase. This is unique, as these are the slower-diffusing species, contrasting past reports of binary Cu-Mo thin films that exhibited Cu-rich agglomerates. The bicontinuous matrices comprised of Cu-rich and Mo(W)-rich phases exhibited bilayer thicknesses of less than 5 nm. The hardness of these thin films measured using nanoindentation is reported and compared to similar multilayers and nanocomposites in binary systems.

36 MATERIALS SCIENCE↗

Physical properties of Al{sub x}In{sub 1–x}N thin film alloys sputtered at low temperature

In this paper, we report on the structural, optical, and electrical properties of a wide compositional range of Al{sub x}In{sub 1–x}N thin layers deposited on glass and polyethylene terephthalate substrates. Al{sub x}In{sub 1–x}N layers of controlled composition were obtained by a simple reactive magnetron co-sputtering protocol, using a single aluminium target with indium insets, by varying the Al/In target surface area ratio, and the composition of the deposition atmosphere. The relevant physical properties were investigated and discussed. It is shown that the texture of the thin films is dependent on the cation ratio, while the bowing parameters of lattice constants and band gap values are larger than those of epitaxial layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigating the plasma parameters of an Ar/O{sub 2} discharge during the sputtering of Al targets in an inverted cylindrical magnetron

The plasma parameters and reaction kinetics in an inverted cylindrical magnetron chamber have been studied with an energy resolved mass spectrometer during the sputtering of aluminum targets in an Ar/O{sub 2} discharge. Mixtures of argon and oxygen were studied as a function of oxygen percentage (0%–90%) in the discharge. The plasma was powered at 4 kW and 40 kHz at a process pressure of 5 mTorr. Al{sup +}, Al, AlO, AlO{sup +}, O{sub 2}{sup +}, O{sup +}, Al{sub 2}O{sup +}, and Ar{sup +} were among the species detected in the discharge. The deposition rate of the deposited thin film decreased with increasing oxygen percentage in the discharge and results indicated that the pure gamma-alumina was obtained when the percentage of oxygen was approximately 70%. The linear plot of energy distributions of the positively charged film forming species changed from a single peak to a bimodal distribution as the percentage of oxygen exceeds 65%. In a log plot, however, the distributions showed multiple peaks ranging from 2 eV to 78 eV. Fluctuations of about 1 eV in peak energies were observed.

36 MATERIALS SCIENCE↗

One-step sputtering of MoSSe metastable phase as thin film and predicted thermodynamic stability by computational methods

Abstract We present the fabrication of a MoS 2−x Se x thin film from a co-sputtering process using MoS 2 and MoSe 2 commercial targets with 99.9% purity. The sputtering of the MoS 2 and MoSe 2 was carried out using a straight and low-cost magnetron radio frequency sputtering recipe to achieve a MoS 2−x Se x phase with x = 1 and sharp interface formation as confirmed by Raman spectroscopy, time-of-flight secondary ion mass spectroscopy, and cross-sectional scanning electron microscopy. The sulfur and selenium atoms prefer to distribute randomly at the octahedral geometry of molybdenum inside the MoS 2−x Se x thin film, indicated by a blue shift in the A 1g and E 1 g vibrational modes at 355 cm −1 and 255 cm −1 , respectively. This work is complemented by computing the thermodynamic stability of a MoS 2−x Se x phase whereby density functional theory up to a maximum selenium concentration of 33.33 at.% in both a Janus-like and random distribution. Although the Janus-like and the random structures are in the same metastable state, the Janus-like structure is hindered by an energy barrier below selenium concentrations of 8 at.%. This research highlights the potential of transition metal dichalcogenides in mixed phases and the need for further exploration employing low-energy, large-scale methods to improve the materials’ fabrication and target latent applications of such structures.

36 MATERIALS SCIENCE↗

Superconducting properties of Nb-Cu nano-composites and nano-alloys

The evolution of the superconducting transition temperature (T{sub c}) in nano-composite and nano-alloys of Nb-Cu, grown by DC magnetron co-sputtering are investigated. Microstructure of these films depends less strongly on the ratio of Nb:Cu but more on the growth temperature. At higher growth temperature, phase separated granular films of Nb and Cu were formed which showed superconducting transition temperatures (T{sub c}) of ~ 7.2±0.5 K, irrespective of the composition. Our results show that this is primarily influenced by the microstructure of the films determined during growth which rules out the superconducting proximity effect expected in these systems. At room temperature growth, films with nano-scale alloying were obtained at the optimal compositional range of 45-70 atomic% (At%) of Nb. These were also superconducting with a T{sub c} of 3.2 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reactive co-sputtering of ternary Au–Ta–O films with tunable electrical resistivity

Heavy-metal-based films with high electrical resistivity are needed for hohlraums for magnetically-assisted inertial confinement fusion. Here, we study ternary Au-Ta-O films deposited by reactive direct-current magnetron co-sputtering from elemental Au and Ta targets in an oxygen containing atmosphere. By varying O content, the electrical resistivity of films can be tuned in a wide range of ~ 100 - 40,000 μΩ cm. With increasing O content, a drastic increase in resistivity occurs at ~ 45 at.% of O, separating regimes with two different dominant conduction mechanisms attributed to metallic conduction through the Au-Ta alloy matrix (for ≲ 45 at.% of O) and tunneling across insulating Ta 2 O 5 layers separating conducting islands (for ≳ 45 at.% of O). Post-deposition annealing at 300 °C leads to the segregation of Au into ~ 50-nm islands, sharply decreasing the resistivity for films with ≳ 45 at.% of O but not for the metal-like films with lower O content.

36 MATERIALS SCIENCE↗

Combinatorial characterization of transparent conductive properties of Ga-doped ZnO films cosputtered from electron cyclotron resonance and rf magnetron plasma sources

The simultaneous sputtering of ZnO and Ga{sub 2}O{sub 3} by electron cyclotron resonance and rf magnetron plasma sources produced Ga-doped ZnO (GZO) films with continuously varying Ga concentration over the substrate surface. Combinatorial evaluation of electrical and optical properties of GZO film grown on silica glass substrate without heater annealing enabled identification of minimum resistivity (0.5 m{Omega} cm) at a Ga{sub 2}O{sub 3} content of 5.5 wt % with an optical transmittance of 90% in the visible wavelength. The monotonically decreasing mobility that was associated with increasing carrier concentration as Ga{sub 2}O{sub 3} content was increased indicated that conduction was governed by ionized impurity scattering. Above the critical Ga{sub 2}O{sub 3} content (6 wt %), carrier concentration decreased since excess Ga atoms that were incorporated beyond the solubility limit at Zn sites hindered large crystalline domains from forming. The ZnO (002) x-ray diffraction peak was suppressed and peaks assigned to Ga{sub 2}O{sub 3} were observed at high Ga{sub 2}O{sub 3} content. The optimum Ga{sub 2}O{sub 3} content shifted to 3.5 wt % at a deposition temperature of 200 deg. C and 2.5 wt % at 300 deg. C, and the minimum resistivity was further decreased to 0.28 m{Omega} cm at 200 deg. C. However, the resistivities at these elevated temperatures were incredibly high both at the lower and higher side of the optimum Ga{sub 2}O{sub 3} content.

36 MATERIALS SCIENCE↗

Boron ion beam generation utilizing lanthanum hexaboride cathodes: Comparison of vacuum arc and planar magnetron glow

Boron ion beams are widely used for semiconductor ion implantation and for surface modification for improving the operating parameters and increasing the lifetime of machine parts and tools. For the latter application, the purity requirements of boron ion beams are not as stringent as for semiconductor technology, and a composite cathode of lanthanum hexaboride may be suitable for the production of boron ions. We have explored the use of two different approaches to boron plasma production: vacuum arc and planar high power impulse magnetron in self-sputtering mode. For the arc discharge, the boron plasma is generated at cathode spots, whereas for the magnetron discharge, the main process is sputtering of cathode material. We present here the results of comparative test experiments for both kinds of discharge, aimed at determining the optimal discharge parameters for maximum yield of boron ions. For both discharges, the extracted ion beam current reaches hundreds of milliamps and the fraction of boron ions in the total extracted ion beam is as high as 80%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical properties of Mg-doped VO{sub 2}: Absorption measurements and hybrid functional calculations

Mg-doped VO{sub 2} thin films with thermochromic properties were made by reactive DC magnetron co-sputtering onto heated substrates, and spectral absorption was recorded at room temperature in the 0.5 < h{omega} < 3.5 eV energy range. Clear evidence was found for a widening of the main band gap from 1.67 to 2.32 eV as the Mg/(V + Mg) atomic ratio went from zero to 0.19, thereby significantly lowering the luminous absorption. This technologically important effect could be reconciled with spin-polarized density functional theory calculations using the Heyd-Scuseria-Ernzerhof [Heyd et al., J. Chem. Phys. 118, 8207 (2003); ibid. 124, 219906 (2006)] hybrid functional. Specifically, the calculated luminous absorptance decreased when the Mg/(V + Mg) ratio was increased from 0.125 to 0.250.

36 MATERIALS SCIENCE↗

Role of bimodal distribution in tailoring the inter-particle interactions in Cu{sub 79}Co{sub 21} nanogranular films

Nanogranular Cu{sub 79}Co{sub 21} films were deposited by magnetron co-sputtering and their magnetotransport properties were investigated as a function of thickness (t). The fitting of magnetoresistance (MR) data reveals the presence of bimodal distribution of Co-particles. With the increase of film thickness from 25 to 200 nm, whereas smaller particle (2.5 nm) distribution remains unaffected, the bigger one grows monotonically from 3.3 nm to 4.9 nm for 25 ≤ t < 100 nm and stays same (4.9 nm) for 100 ≤ t ≤ 200 nm. From MR data recorded in the range of 20–300 K, it is observed that dependence of MR on thickness keeps on reducing on lowering the temperature. This observance has been presented in terms of presence of bimodal distribution and its role in tailoring the inter-particle magnetic interactions.

36 MATERIALS SCIENCE↗

Enhancement of Er optical efficiency through bismuth sensitization in yttrium oxide

The process of energy transfer (ET) between optically active ions has been widely studied to improve the optical efficiency of a system for different applications, from lighting and photovoltaics to silicon microphotonics. In this work, we report the influence of Bi on the Er optical emission in erbium-yttrium oxide thin films synthesized by magnetron co-sputtering. We demonstrate that this host permits to well dissolve Er and Bi ions, avoiding their clustering, and thus to stabilize the optically active Er{sup 3+} and Bi{sup 3+} valence states. In addition, we establish the ET occurrence from Bi{sup 3+} to Er{sup 3+} by the observed Bi{sup 3+} PL emission decrease and the simultaneous Er{sup 3+} photoluminescence (PL) emission increase. This was further confirmed by the coincidence of the Er{sup 3+} and Bi{sup 3+} excitation bands, analyzed by PL excitation spectroscopy. By increasing the Bi content of two orders of magnitude inside the host, though the occurrence of Bi-Bi interactions becomes deleterious for Bi{sup 3+} optical efficiency, the ET process between Bi{sup 3+} and Er{sup 3+} is still prevalent. We estimate ET efficiency of 70% for the optimized Bi:Er ratio equal to 1:3. Moreover, we have demonstrated to enhance the Er{sup 3+} effective excitation cross section by more than three orders of magnitude with respect to the direct one, estimating a value of 5.3 × 10{sup −18} cm{sup 2}, similar to the expected Bi{sup 3+} excitation cross section. This value is one of the highest obtained for Er in Si compatible hosts. These results make this material very promising as an efficient emitter for Si-compatible photonics devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of molybdenum doping and thermal annealing on the physical properties of amorphous In–Zn–O films

Highlights: • The effects of Mo doping and thermal annealing on a-IZO films were studied. • The carrier mobility of Mo-doped a-IZO films was enhanced by thermal annealing. • The optical bandgap of a-IZO films was unaffected by Mo doping. • Ferromagnetism was observed in Mo-doped a-IZO films after annealing. - Abstract: Amorphous In–Zn–O (a-IZO) films doped with Mo were prepared on glass substrates by using magnetron co-sputtering technique. The Mo concentration was controlled by varying the sputtering power applied on the Mo target. The effects of Mo doping and thermal annealing on the electrical, optical and magnetic properties of the a-IZO films were studied. The electrical properties of a-IZO films were found to be strongly affected by Mo doping and thermal annealing. The optical transmission near the absorption edge of a-IZO films is enhanced by Mo doping due to the decrease in reflection. The optical bandgap estimated to be 3.2 eV of a-IZO films is unaffected by Mo doping and thermal annealing. Moreover, some of Mo-doped films exhibit room-temperature ferromagnetism after annealing.

36 MATERIALS SCIENCE↗