Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Magnetic field effect on spin dependent conversion of nonequilibrium Si-O chemical bonds on the Czochralski-grown Si crystal surface

The magnetic field effect on the surface oxidation of Czochralski-grown Si single crystals has been observed via atomic force microscopy, electron microscopy, secondary emission ion and Auger spectroscopy, and x-ray photoelectron spectroscopy. The changes in the concentration of oxygen complexes and chemical elements on the crystal surface exposed to a magnetic field of 0.17 T are evidence of spin dependent surface reactions involving unstable intermediate Si-O-Si complexes as precursors. The experimental data have been discussed in terms of the theory of spin dependent reactions controlled by magnetic field.

36 MATERIALS SCIENCE↗

Epitaxial BaTiO{sub 3}(100) films on Pt(100): A low-energy electron diffraction, scanning tunneling microscopy, and x-ray photoelectron spectroscopy study

The growth of epitaxial ultrathin BaTiO{sub 3} films on a Pt(100) substrate has been studied by scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and x-ray photoelectron spectroscopy (XPS). The films have been prepared by radio-frequency-assisted magnetron sputter deposition at room temperature and develop a long-range order upon annealing at 900 K in O{sub 2}. By adjusting the Ar and O{sub 2} partial pressures of the sputter gas, the stoichiometry was tuned to match that of a BaTiO{sub 3}(100) single crystal as determined by XPS. STM reveals the growth of continuous BaTiO{sub 3} films with unit cell high islands on top. With LEED already for monolayer thicknesses, the formation of a BaTiO{sub 3}(100)-(1 x 1) structure has been observed. Films of 2-3 unit cell thickness show a brilliant (1 x 1) LEED pattern for which an extended set of LEED I-V data has been acquired. At temperatures above 1050 K the BaTiO{sub 3} thin film starts to decay by formation of vacancy islands. In addition (4 x 4) and (3 x 3) surface reconstructions develop upon prolonged heating.

36 MATERIALS SCIENCE↗

Highly mobile type II twin boundary in Ni-Mn-Ga five-layered martensite

Twin relationships and stress-induced reorientation were studied in Ni{sub 2}Mn{sub 1.14}Ga{sub 0.86} single crystal with five-layered modulated martensite crystal structure. Very low twinning stress of about 0.1 MPa was found for twin boundaries which deviated a few degrees from the (011) crystallographic plane. However, twin boundaries oriented exactly parallel to the (011) plane exhibited considerably higher level of twinning stress, above 1 MPa. X-ray diffraction experiments and calculations based on approximation of the martensite crystal lattice as a tetragonal lattice with a slight monoclinic distortion identified the two different kinds of twin interfaces as type II and type I twin boundaries.

36 MATERIALS SCIENCE↗

Effects of ultraviolet photon irradiation on the transition metal impurities in LaAlO{sub 3}

By measuring electron spin resonance (ESR) spectra at the X-band frequency and absorption spectra from the visible to ultraviolet region at room temperature, it was confirmed that perovskite single crystal LaAlO{sub 3} contains Cr and Fe as impurities. When LaAlO{sub 3} is exposed to photons with energies higher than 4.5 eV, the intensities of ESR signals due to Cr{sup 3+} and Fe{sup 3+} decrease, which indicates that electrons released by the photon irradiation are captured by Cr{sup 3+} and Fe{sup 3+}. Concurrently with this, a broad optical absorption band at about 3.0 eV and two new broad and weak ESR signals appear. The former is attributable to a combination of a hole and a La{sup 3+} (or Al{sup 3+}) vacancy, and the two weak ESR signals are assigned to the O{sup -} center and F{sup +} center.

36 MATERIALS SCIENCE↗

Angle-resolved cathodoluminescence spectroscopy

We present a cathodoluminescence spectroscopy technique which combines deep subwavelength excitation resolution with angle-resolved detection capabilities. The cathodoluminescence emission is collected by a paraboloid mirror (effective NA = 0.96) and is projected onto a 2D CCD array. The azimuthal and polar emission pattern is directly deduced from the image. As proof of principle, we use the technique to measure the angular distribution of transition radiation from a single crystalline gold surface under 30 keV electron irradiation. We find that the experiment matches very well with theory, illustrating the potential of this technique for the characterization of photonic structures with deep subwavelength dimensions.

36 MATERIALS SCIENCE↗

Influence of crystal orientation and ion bombardment on the nitrogen diffusivity in single-crystalline austenitic stainless steel

The nitrogen diffusivity in single-crystalline AISI 316L austenitic stainless steel (ASS) during ion nitriding has been investigated at different crystal orientations ((001), (110), (111)) under variations of ion flux (0.3-0.7 mA cm{sup -2}), ion energy (0.5-1.2 keV), and temperature (370-430 deg. C). The nitrogen depth profiles obtained from nuclear reaction analysis are in excellent agreement with fits using the model of diffusion under the influence of traps, from which diffusion coefficients were extracted. At fixed ion energy and flux, the diffusivity varies by a factor up to 2.5 at different crystal orientations. At (100) orientation, it increases linearly with increasing ion flux or energy. The findings are discussed on the basis of atomistic mechanisms of interstitial diffusion, potential lattice distortions, local decomposition, and ion-induced lattice vibrational excitations.

36 MATERIALS SCIENCE↗

Synthesis, Growth, Spectral and Optical Properties of Glycinyl Urea Single Crystal

Single crystals of Glycinyl Urea were grown from aqueous solution by slow evaporation technique at room temperature. The cell parameters of the grown crystals were estimated by Single X-ray diffraction studies. The functional groups present in the grown crystals were ascertained using FTIR spectrum analysis. UV-visible transmittance spectrum was recorded to study the optical transparency of the grown crystal. The non-linear optical property has been tested by Kurtz powder technique.

36 MATERIALS SCIENCE↗

Successful Cleaning and Study of Contamination of Si(001) in Ultrahigh Vacuum

This paper presents the very first surface physics experiment performed in ultrahigh vacuum (UHV) in Romania, using a new molecular beam epitaxy (MBE) installation. Cleaning of a Si(001) wafer was achieved by using a very simple technique: sequences of annealing at 900-1000 deg. C in ultrahigh vacuum: low 10{sup -8} mbar, with a base pressure of 1.5x10{sup -10} mbar. The preparation procedure is quite reproducible and allows repeated cleaning of the Si(001) after contamination in ultrahigh vacuum. The Si(001) single crystal surface is characterized by low energy electron diffraction (LEED), reflection high energy electron diffraction (RHEED), and Auger electron spectroscopy (AES). The latter technique is utilized in order to investigate the sample contamination by the residual gas in the UHV chamber, as determined by a residual gas analyzer (RGA). Unambiguous assignment of oxidized and unoxidized silicon is provided; also, an important feature is that the LVV Auger peak at 90-92 eV cannot be solely attributed to clean Si (i.e. Si surrounded only by Si), but also to silicon atoms bounded with carbon. Even with a sum of partial pressures of oxygen and carbon containing molecules in the range of 5x10{sup -10} mbar, the sample is contaminated very quickly, having a (1/e) lifetime of about 76 minutes.

36 MATERIALS SCIENCE↗

Lattice thermal conductivity of ultra high temperature ceramics ZrB{sub 2} and HfB{sub 2} from atomistic simulations

Atomistic Green-Kubo simulations are performed to evaluate the lattice thermal conductivity for single crystals of the ultra high temperature ceramics ZrB{sub 2} and HfB{sub 2}. Recently developed interatomic potentials are used for these simulations. Heat current correlation functions show rapid oscillations, which can be identified with mixed metal-Boron optical phonon modes. Results for temperatures from 300K to 1000K are presented.

36 MATERIALS SCIENCE↗

Magnetic properties of Fe{sub 0.4}Mn{sub 0.6}/Co{sub 2}FeAl bilayers grown on GaAs by molecular-beam epitaxy

Polycrystalline Fe{sub 0.4}Mn{sub 0.6} layers with the different thickness are deposited on 4-nm-thick single-crystalline Co{sub 2}FeAl layers, which are grown on GaAs (001) substrates at room temperature by molecular-beam epitaxy. Both the exchange bias and the in-plane magnetic anisotropies of the bilayers are strongly dependent on the thickness of the Fe{sub 0.4}Mn{sub 0.6} layer. The former is described using a granular level model. A modified Stoner-Wohlfarth model is used to explain the in-plane magnetic anisotropies observed at 5 K, while one possible reason for the magnetic anisotropies measured at 300 K is the complex interfacial magnetic properties proved by x-ray magnetic circular dichroism measurements.

36 MATERIALS SCIENCE↗

Determination of secondary ion mass spectrometry relative sensitivity factors for polar and non-polar ZnO

Zinc oxide (ZnO) is regarded as a promising material for optoelectronic devices, due to its electronic properties. Solely, the difficulty in obtaining p-type ZnO impedes further progress. In this connection, the identification and quantification of impurities is a major demand. For quantitative information using secondary ion mass spectrometry (SIMS), so-called relative sensitivity factors (RSF) are mandatory. Such conversion factors did not yet exist for ZnO. In this work, we present the determined RSF values for ZnO using primary (ion implanted) as well as secondary (bulk doped) standards. These RSFs have been applied to commercially available ZnO substrates of different surface termination (a-plane, Zn-face, and O-face) to quantify the contained impurities. Although these ZnO substrates originate from the same single-crystal, we observe discrepancies in the impurity concentrations. These results cannot be attributed to surface termination dependent RSF values for ZnO.

36 MATERIALS SCIENCE↗

Quantitative measurement of in-plane cantilever torsion for calibrating lateral piezoresponse force microscopy.

A simple quantitative measurement procedure of in-plane cantilever torsion for calibrating lateral piezoresponse force microscopy is presented. This technique enables one to determine the corresponding lateral inverse optical lever sensitivity (LIOLS) of the cantilever on the given sample. Piezoelectric coefficient, d{sub 31} of BaTiO{sub 3} single crystal (-81.62 {+-} 40.22 pm/V) which was calculated using the estimated LIOLS was in good agreement with the reported value in literature.

47 OTHER INSTRUMENTATION↗

Thermal transport in thin films measured by time-resolved, grazing incidence x-ray diffraction.

We use depth- and time-resolved x-ray diffraction to study thermal transport across single crystal Bi films grown on sapphire in order to determine the thermal conductivity of the film and the Kapitza conductance of the interface. Ultrafast Ti:sapphire laser pulses were used to heat the films; x-ray diffraction then measured the film's lattice expansion. Use of grazing incidence diffraction geometry provided depth sensitivity, as the x-ray angle of incidence was varied near the critical angle. The shift of the film's Bragg peak position with time was used to determine the film temperature averaged over an x-ray penetration depth that could be selected by choice of the angle of incidence. For films that were thick compared to the laser penetration depth, we observed a large temperature gradient at early times. In this case, measurements with the incident angle near or well above the critical angle were more sensitive to the film conductivity or Kapitza conductance, respectively. For thinner films, however, cooling was dominated by the Kapitza conductance at all accessible time scales.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In-situ x-ray diffraction studies on post-deposition vacuum-annealing of ultra-thin iron oxide films

A maghemite ({gamma}-Fe{sub 2}O{sub 3}) film of 8.3 nm thickness is epitaxially grown on MgO(001) single crystal substrate by reactive molecular beam epitaxy. Chemical composition and crystal structure of the surface was studied by x-ray photoelectron spectroscopy and low energy electron diffraction, respectively. Afterwards the sample was moved to a heating cell for in situ x-ray diffraction experiments on the post-deposition annealing process in high-vacuum to study structural phase transitions of the iron oxide film. The iron oxide film is reduced with increasing temperature. This reduction occurs in two steps that are accompanied by structural transitions. The first step is a reduction from {gamma}-Fe{sub 2}O{sub 3} to Fe{sub 3}O{sub 4} at 360 deg. C and the second step is the reduction from Fe{sub 3}O{sub 4} to FeO at 410 deg. C.

36 MATERIALS SCIENCE↗

In situ observation of x-ray irradiation effect by using a multiwave x-ray diffraction phenomenon

In situ observation of the complex scattering amplitude of x-ray specular reflection (amplitude reflectivity) was performed by using a method with a multiwave x-ray diffraction phenomenon. The method can be applied to the noncrystalline layers on a single crystal and allows us to determine its amplitude reflectivity with only a 0.01 degree of crystal rotation, that is, the area irradiated by the incident x rays is almost unchanged during the measurement. We used this method to observe an irradiation effect induced by monochromatic synchrotron x-rays that occurred on a Si(001) single crystal covered with a native oxide layer. The obtained time evolution of the amplitude reflectivities exhibited counterclockwise behavior in the complex plane, indicating that the thickness of the noncrystalline layer on the crystalline substrate was increased by the irradiation.

36 MATERIALS SCIENCE↗

Cu-Doping of ZnO by Nuclear Transmutation

Zinc oxide single crystals were doped with copper acceptors by means of the nuclear transmutation doping (NTD) method, which gives highly uniform dopant distributions and has a much higher probability of controlling the dopant locations in the lattice. The Cu doping was confirmed by the infrared absorption signature of Cu2+ at 5780 cm-1. Hall-effect measurements were performed to study the effect of CuZn on the electrical properties of ZnO. These measurements indicated that the Cu acceptor level lies 0.126 eV below the conduction-band minimum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial {tau} phase MnAl thin films on MgO (001) with thickness-dependent magnetic anisotropy

In this study, ferromagnetic MnAl films were prepared by alternating Al/Mn quasi-monolayer deposition using a novel biased target ion beam deposition (BTIBD) technique. XRD results showed that the magnetic {tau} phase was well formed in MnAl thin films ({approx}10 nm), which grew epitaxially on single crystal MgO (001) substrates. The optimized saturation magnetization was {approx}394 emu/cc. Furthermore, we observed a thickness-dependent uniaxial anisotropy in ferromagnetic MnAl films, which was attributed to the change of the tetragonal lattice distortion as a function of film thickness. The relationship between the film thicknesses and saturation magnetizations suggested the existence of a magnetically dead layer {approx}2.7 nm with an extrapolated saturation moment around 523 emu/cc ({approx}1.90 {mu}{sub B}/Mn). This value has exceeded the experimental value in bulk materials and is close to the theoretically predicted magnetization ({approx}1.975 {mu}{sub B}/Mn).

36 MATERIALS SCIENCE↗