SEARCH · Search NASA
Results for “Matrix Model”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Results of the 2013 UT modeling benchmark obtained with models implemented in CIVA
The 2013 Ultrasonic Testing (UT) modeling benchmark concerns direct echoes from side drilled holes (SDH), flat bottom holes (FBH) and corner echoes from backwall breaking artificial notches inspected with a matrix phased array probe. This communication presents the results obtained with the models implemented in the CIVA software: the pencilmodel is used to compute the field radiated by the probe, the Kirchhoff approximation is applied to predict the response of FBH and notches and the SOV (Separation Of Variables) model is used for the SDH responses. The comparison between simulated and experimental results are presented and discussed.
Feeder Power Disaggregation: A Data-Efficient Matrix Completion Approach
This paper presents a data-driven algorithm for the feeder power disaggregation problem in distribution systems. Leveraging spatio-temporal power patterns in residential homes, residential power is discomposed into three components: sparse-switching loads, periodic loads, and photovoltaic (PV) generation, which are characterized through the design of two sparse matrices and a low-rank matrix. The matrix completion process is data-efficient because of the matrix sparsity and low rankness, along with the use of power system models. The proposed approach is tested using real-world residential data set on a 33-bus distribution system, demonstrating accurate power disaggregation with efficient matrix completion.
Multi-scale modeling of wastage layer formation in metallic fuel cladding
Fuel-cladding chemical interaction (FCCI) is a major concern for U-Zr metallic fuels' performance, primarily due to the formation of a brittle layer (wastage) in the cladding. This brittle layer, resulting from intermetallic compounds between cladding constituents Fe, Cr, and lanthanide fission products, significantly impacts the cladding's mechanical integrity. Recent efforts focus on developing a mechanistic modeling framework to understand lanthanide production, transport to the fuel-cladding interface, and phase transformation to intermetallic phases. A multi-scale computational approach has been used to calculate lanthanide transport rates, with atomistic calculations determining Nd diffusivities through the solid fuel matrix and along pore surfaces. These diffusivities inform a mesoscale model to determine an effective diffusion coefficient, accounting for porosity and infiltration with bond sodium. This effective diffusivity is used in engineering-scale simulations via the BISON fuel performance code, which has been validated against EBR-II and FFTF reactor experiments.
Interlayer fusion bonding of semi-crystalline polymer composites in extrusion deposition additive manufacturing
This work focuses on the evolution of interlayer fracture toughness properties of fiber-reinforced, semi-crystalline polymers in the extrusion deposition additive manufacturing (EDAM) process. Further, this work bridges the gap between the additive process conditions (time-temperature history) and the effective layer-to-layer fracture properties developed within a printed component. This is the first step to predict delamination that can occur during printing, during cooling to room temperature after printing, and during service performance of an additively manufactured geometry. A phenomenological model is developed for fusion bonding of semi-crystalline polymer matrix composites by coupling the interdiffusion of polymer chains with the evolution of polymer crystallinity. While the interdiffusion is captured by reptation theory of polymer dynamics, the evolution of crystallinity is modeled by phenomenological crystallization kinetics and crystal melting dynamics. Further, a methodology is developed to determine the critical strain energy release rate, G IC of the interlayer interface and experiments are conducted utilizing the double cantilever beam fracture test geometry. In conclusion, predictions of GIC as a function of thermal history are compared with experiments.
Computer code for double beta decay QRPA based calculations
The computer code developed by our group some years ago for the evaluation of nuclear matrix elements, within the QRPA and PQRPA nuclear structure models, involved in neutrino-nucleus reactions, muon capture and β{sup ±} processes, is extended to include also the nuclear double beta decay.
Trapping of charge carriers into InAs/AlAs quantum dots at liquid-helium temperature
The problem of how the probability of trapping of charge carriers into quantum dots via the wetting layer influences the steady-state and time-dependent luminescence of the wetting layer and quantum dots excited via the matrix is analyzed in the context of some simple models. It is shown that the increase in the integrated steady-state luminescence intensity of quantum dots with increasing area fraction occupied by the quantum dots in the structure is indicative of the suppression of trapping of charge carriers from the wetting layer into the quantum dots. The same conclusion follows from the independent decays of the time-dependent luminescence signals from the wetting layer and quantum dots. The processes of trapping of charge carriers into the InAs quantum dots in the AlAs matrix at 5 K are studied experimentally by exploring the steady-state and time-dependent photoluminescence. A series of structures with different densities of quantum dots has been grown by molecular-beam epitaxy on a semi-insulating GaAs (001) substrate. It is found that the integrated photoluminescence intensity of quantum dots almost linearly increases with increasing area occupied with the quantum dots in the structure. It is also found that, after pulsed excitation, the photoluminescence intensity of the wetting layer decays more slowly than the photoluminescence intensity of the quantum dots. According to the analysis, these experimental observations suggest that trapping of excitons from the wetting layer into the InAs/AlAs quantum dots at 5 K is suppressed.
Energy levels and zero field splitting parameter for Fe{sup 2+} doped in ZnS
The aim of present paper is to report the results on the modeling of the crystal field parameters of Fe{sup 2+} doped in host matrix ZnS, simulate the energy levels scheme and calculate the zero field splitting parameter D of such system. The crystal field parameters were modeled in the frame of the superposition model of crystal field and the simulation of the energy levels scheme and calculation of the zero field splitting parameters done by diagonalization the Hamiltonian of Fe{sup 2+}:ZnS system. The obtained results were disscused and compared with experimental data. Satisfactory agreement have been obtained.
Improved Statistical Analysis for the Neutrinoless Double-Beta Decay Matrix Element of 136Xe
Neutrinoless double beta decay nuclear matrix element (M0ν) for 136Xe was recently analyzed using a statistical approach (Phys. Rev. C 107, 045501 (2023)). In the analysis, three initial shell model effective Hamiltonians were randomly altered, and their results for 23 measured observables were used to infer credibility for the M0ν nuclear matrix element (NME) based on a Bayesian Model Averaging approach. In that analysis, a reasonable Gamow-Teller quenching factor of 0.7 was assumed for each starting effective Hamiltonian. Given that the result of the statistical analysis was sensible to this choice, we are here improving that analysis by assuming that the Gamow-Teller quenching factor is also randomly chosen within reasonabe limits for all three starting Hamiltonians. The outcomes are slightly higher expectation values and uncertainties for the M0ν NME.
Hybrid programming-model strategies for GPU offloading of electronic structure calculation kernels
To address the challenge of performance portability and facilitate the implementation of electronic structure solvers, we developed the basic matrix library (BML) and Parallel, Rapid O(N), and Graph-based Recursive Electronic Structure Solver (PROGRESS) library. The BML implements linear algebra operations necessary for electronic structure kernels using a unified user interface for various matrix formats (dense and sparse) and architectures (CPUs and GPUs). Focusing on density functional theory and tight-binding models, PROGRESS implements several solvers for computing the single-particle density matrix and relies on BML. In this paper, we describe the general strategies used for these implementations on various computer architectures, using OpenMP target functionalities on GPUs, in conjunction with third-party libraries to handle performance critical numerical kernels. In this study, we demonstrate the portability of this approach and its performance in benchmark problems.
Short-distance matrix elements for $D$-meson mixing for 2+1 lattice QCD
We study the short-distance hadronic matrix elements for D-meson mixing with partially quenched N f = 2+1 lattice QCD. We use a large set of the MIMD Lattice Computation Collaboration's gauge configurations with a 2 tadpole-improved staggered sea quarks and tadpole-improved Lüscher-Weisz gluons. We use the a 2 tadpole-improved action for valence light quarks and the Sheikoleslami-Wohlert action with the Fermilab interpretation for the valence charm quark. Our calculation covers the complete set of five operators needed to constrain new physics models for D-meson mixing. We match our matrix elements to the MS-NDR scheme evaluated at 3 GeV. We report values for the Beneke-Buchalla-Greub-Lenz-Nierste choice of evanescent operators.
Investigating the Difference in Mechanical Stability of Retained Austenite in Bainitic and Martensitic High-Carbon Bearing Steels using in situ Neutron Diffraction and Crystal Plasticity Modeling
In situ neutron diffraction of the uniaxial tension test was used to study the effect of the surrounding matrix microstructure on the mechanical stability of retained austenite in high-carbon bearing steels. Comparing the samples with bainitic microstructures to those with martensitic ones, it was found that the retained austenite in a bainitic matrix starts transforming into martensite at a lower strain compared to that within a martensitic matrix. On the other hand, the rate of transformation of the austenite was found to be higher within a martensitic microstructure. Crystal plasticity modeling was used to analyze the transformation phenomenon in these two microstructures and determine the effect of the surrounding microstructure on elastic, plastic, and transformation components of the strain. The results showed that the predominant difference in the deformation accumulated was from the transformation strain and the critical transformation driving force within the two microstructures. The retained austenite was more stable for identical loading conditions in case of martensitic matrix compared to the bainitic one. It was also observed that the initial volume fraction of retained austenite within the bainitic matrix would alter the onset of transformation to martensite, but not the rate of transformation.
Opposite photo-induced deformations in azobenzene-containing polymers with different molecular architecture: Molecular dynamics study
Photo-induced deformations in azobenzene-containing polymers (azo-polymers) are central to a number of applications, such as optical storage and fabrication of diffractive elements. The microscopic nature of the underlying opto-mechanical coupling is yet not clear. In this study, we address the experimental finding that the scenario of the effects depends on molecular architecture of the used azo-polymer. Typically, opposite deformations in respect to the direction of light polarization are observed for liquid crystalline and amorphous azo-polymers. In this study, we undertake molecular dynamics simulations of two different models that mimic these two types of azo-polymers. We employ hybrid force field modeling and consider only trans-isomers of azobenzene, represented as Gay-Berne sites. The effect of illumination on the orientation of the chromophores is considered on the level of orientational hole burning and emphasis is given to the resulting deformation of the polymer matrix. We reproduce deformations of opposite sign for the two models being considered here and discuss the relevant microscopic mechanisms in both cases.
Interaction-Driven Spontaneous Quantum Hall Effect on a Kagome Lattice
Topological states of matter have been widely studied as being driven by an external magnetic field, intrinsic spin-orbital coupling, or magnetic doping. With this work, we unveil an interaction-driven spontaneous quantum Hall effect (a Chern insulator) emerging in an extended fermion-Hubbard model on a kagome lattice, based on a state-of-the-art density-matrix renormalization group on cylinder geometry and an exact diagonalization in torus geometry.We first demonstrate that the proposed model exhibits an incompressible liquid phase with doublet degenerate ground states as time-reversal partners. The explicit spontaneous time-reversal symmetry breaking is determined by emergent uniform circulating loop currents between nearest neighbors. Moreover, the fingerprint topological nature of the ground state is characterized by quantized Hall conductance. Hence, we identify the liquid phase as a quantum Hall phase, which provides a “proof-of-principle” demonstration of the interaction-driven topological phase in a topologically trivial noninteracting band.
Unifying soil organic matter formation and persistence frameworks: the MEMS model
Soil organic matter (SOM) dynamics in ecosystem-scale biogeochemical models have traditionally been simulated as immeasurable fluxes between conceptually defined pools. This greatly limits how empirical data can be used to improve model performance and reduce the uncertainty associated with their predictions of carbon (C) cycling. Recent advances in our understanding of the biogeochemical processes that govern SOM formation and persistence demand a new mathematical model with a structure built around key mechanisms and biogeochemically relevant pools. Here, we present one approach that aims to address this need. Our new model (MEMS v1.0) is developed from the Microbial Efficiency-Matrix Stabilization framework, which emphasizes the importance of linking the chemistry of organic matter inputs with efficiency of microbial processing and ultimately with the soil mineral matrix, when studying SOM formation and stabilization. Building on this framework, MEMS v1.0 is also capable of simulating the concept of C saturation and represents decomposition processes and mechanisms of physico-chemical stabilization to define SOM formation into four primary fractions. After describing the model in detail, we optimize four key parameters identified through a variance-based sensitivity analysis. Optimization employed soil fractionation data from 154 sites with diverse environmental conditions, directly equating mineral-associated organic matter and particulate organic matter fractions with corresponding model pools. Finally, model performance was evaluated using total topsoil (0–20 cm) C data from 8192 forest and grassland sites across Europe. Despite the relative simplicity of the model, it was able to accurately capture general trends in soil C stocks across extensive gradients of temperature, precipitation, annual C inputs and soil texture. The novel approach that MEMS v1.0 takes to simulate SOM dynamics has the potential to improve our forecasts of how soils respond to management and environmental perturbation. Ensuring these forecasts are accurate is key to effectively informing policy that can address the sustainability of ecosystem services and help mitigate climate change.
Probing nonunitary mixing and CP violation at a neutrino factory
A low-energy nonunitary leptonic mixing matrix is a generic feature of many extensions of the standard model. In such a case, the task of future precision neutrino oscillation experiments is more ambitious than measuring the three mixing angles and the leptonic (Dirac) CP phase, i.e., the accessible parameters of a unitary leptonic mixing matrix. A nonunitary mixing matrix has 13 parameters that affect neutrino oscillations, out of which four are CP violating. In the scheme of minimal unitarity violation we analyze the potential of a neutrino factory for determining or constraining the parameters of the nonunitary leptonic mixing matrix, thereby testing the origin of CP violation in the lepton sector.
Pairing tendencies in a two-orbital Hubbard model in one dimension
The recent discovery of superconductivity under high pressure in the ladder compound BaFe 2 S 3 has opened a new field of research in iron-based superconductors with focus on quasi-one-dimensional geometries. In this publication, using the density matrix renormalization group technique, we study a two-orbital Hubbard model defined in one-dimensional chains. Our main result is the presence of hole binding tendencies at intermediate Hubbard U repulsion and robust Hund coupling J H / U = 0.25. Binding does not occur either in weak coupling or at very strong coupling. The pair-pair correlations that are dominant near half-filling, or of similar strength as the charge and spin correlation channels, involve hole-pair operators that are spin singlets, use nearest-neighbor sites, and employ different orbitals for each hole. As a result, the Hund coupling strength, presence of robust magnetic moments, and antiferromagnetic correlations among them are important for the binding tendencies found here.
Study of the structure of light, unstable nuclei and the mechanism of elastic proton scattering
The review presents calculations of elastic p {sup 6}He-, p {sup 8}Li-, p {sup 9}Li- and p {sup 9}C scattering in the framework of the Glauber theory of multiple diffraction scattering at intermediate energies of 70 and 700 MeV/nucleon. The most significant result of the calculations is that we have utilized realistic three-body wave functions obtained within modern nuclear models. The relation is found between differential cross sections and intercluster potentials, where the nuclear wave functions are calculated. Conclusions are made concerning the types of potentials which describe most realistically the available experimental data. The method for calculation of three-body wave functions in α-n-n-, α-t-n-, {sup 7}Be-p-p-, α-t-2n-, and {sup 7}Li-n-n models is described with discussion of inter-cluster potentials and the quantum-number configurations taken into consideration. It is revealed how the wave functions and the nuclear electromagnetic characteristics calculated using these wave functions depend on the choice of intercluster potentials. The derivation of matrix elements (amplitudes) of pA scattering in the framework of the Glauber approach with three-body wave functions is presented by an example of {sup 6}He nucleus. Discussing the results of calculation of differential cross sections and the analyzing power (A{sub y}), we established how the calculated characteristics depend on a wave-function structure and dynamics of the process determined by a Glauber operator of multiple scattering. The calculated differential cross sections and analyzing powers are compared with available experimental data and calculations by other authors performed for different formalisms, which allows us to make justified conclusions.